IPhoto Not Responding after Migration to new MacBook

Gang,
I bought my wife a new White MacBook and I used the Migration Assistant to move her data from her old iBook. Everything went well except for iPhoto. When I opened it for the first time it started updating the photo library but it hangs at around 32 minutes remaining. In the activity monitor it goes red and says Not Responding. It has done this 4 time now even after reboots. Also, the photos did transfer over and can be seen in the Desktop/ScreenSaver Preference.
Any ideas how to get past this?
TIA,
James

Gang,
I have deleted the iPhoto Library and replaced it several times but each time when I open iPhoto on the new MacBook it wants to update the library and then after about 3 minutes it will hang. In the Activity Monitor the process turns red and reads (not responding).
This has been going on for two days now and it is the only thing I can not get working on her new MacBook.
On the old iBook iPhoto works just fine.
Any ideas???????
TIA,
James

Similar Messages

License not working after migrating to new MacBook Pro

I migrated recently to a new MacBook Pro. Aperture is finding it hard to recognize my license from earlier MacBook Pro
Aperture license shows blank. Asks for license. Does not accept my Aperture 2 or 3 license.
Do I have to ?
* Backup my data
* Uninstall Aperture 3 that was migrated
* Install Aperture 2 again
* Put license
* Apply Aperture 3 upgrade again
* Open photo libraries to check compatibility
Any recommended way of handling the license recognition with least hassle?
Last working setup
* MacBook Pro Core 2 Duo 2.1 GHz
* Snow Leopard 10.6.4
* Aperture 2
* Aperture 3 upgrade applied to Aperture 2
Now
* MacBook Pro i5 2.4GHz
* Snow Leopard 10.6.4
* Aperture 3 (Migrated from MBP2.1Ghz)
Any help would be appreciated.

Tony Gay wrote:
Migrating a Pro application will not work, you need to delete the Aperture application, only the ap, from your MBP, and do an install from the supplied disc or download, this should then take you serial number.
Tony
I keep reading people state this, but I've migrated a bunch of times since first getting Aperture 1 (or whatever Apple called it). I just did a migration from a 15" MBP (Early 2009) to a brand spanking new 17" MBP i7. Aperture 2 is working perfectly. I'm not bragging or anything, because if something is going to go wrong, it will go wrong with me. Yet, I haven't had any issues with any migration and "Pro apps" including moving iMacs to iMacs, iMacs to MBP, MBP to iMacs, etc etc.
Now I'm paranoid that Aperture is going to blow up on me next week!

Mail not opening after migration to new macbook pro

Hello all,
I recently transferred all of my files using migration assistant from a powerbook G4 to a Macbook Pro and now mail will not open. It will show up in the bar underneath the screen but it won't display anything and it won't quit. Anyone have any solutions?

Without having to mess with plists, or messing with other arcane buried folders, this solution for me in migrating from a G4 to a Mini.
http://discussions.apple.com/thread.jspa?messageID=8843200&#8843200
Simple. Move the ~/Library/Mail folder out and back in. Read the thread for the specific order. It's easy and save me tons of heartache.

Why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

Startup slow after migration to new MacBook Pro

startup slow after migration of 2008 MacBook Pro to 2014 MacBook Pro

That crash is citing an issue with a ColorSync profile - the AdobeRGB1998 one.
Try launch ColorSync Utility and see if you can repair it.

Mail not responding after migration assistant to new mbp

I just got a new macbook pro, and migrated everything except applications via time machine from my old macbook (both with up-to-date snow leopard).
When i try to open Mail, it pops up saying it will import all my old mail - this completes and i press 'done' - however the main mail window pops up with an empty inbox and automatically i get the rainbow wheel which goes on indefinitely; more than an hour. I've tried several times and this is what happens, can't access anything.
How do i resolve this? is it best to delete all my mail first, open mail and then import from time machine? if so, how do i delete mail manually?

Not sure why this did not work. If you want to do over, then in the Finder remove the Mail folder at Home/Library/Mail, and the com.apple.mail.plist file at Home/Library/Preferences. Then copy those files from the time machine.
Ernie

Iphoto not responding after upgrade to Tiger

I've just upgraded to Tiger. When I try to open iphoto, nothing happens. I get the iphoto screen, with an indication at the bottom that there are 3100 pictures within the program. But the little working wheel just keeps spinning. When I open the program holding the Option key I get a "library not found" message. In answer to the query, I instruct the program to find the library and it locates the "iphoto library" in user/pictures/. But when I click to "open" that library I again get the eternally spinning working wheel and the "force quit applications" screen tells me that Iphoto is not responding. Can anyone help?

Alain
Welcome to Discussions. Other Mac users are here to help.
There are procedures you should follow before and after an install. I will also list some other things to do if that doesn't work.
Please do not try to do anything to the database itself - the iPhoto Library Folder in your Pictures Folder.
Most likely because of updates or installs you need to:
1. Restart your computer to repair the directory if needed.
2. Run "Repair Permissions" from Disk Utility located in your Applications>Utilties Folder.
3. Try iPhoto again. If it doesn't work then QUIT iPhoto.
4. Your iPhoto preferences file may be corrupted.
(MAKE SURE you QUIT iPhoto first)
You will find it in your Home directory:
(Home/your account) >Library>Preferences>com.apple.iPhoto.plist
Remove or trash the preference (.plist file) and restart iPhoto.
iPhoto will open like it was the first time
If it still doesn't work go on to these remedies, in order.
5. Bad Album data?
Old Toad says:
1 - move the Albums folder and the AlbumData.xml file from the iPhoto library folder in your Pictures folder to the desktop.
2 - launch iPhoto. It if launches successfully you probably have a corrupt album.
To locate the bad "apple", pun intended, do the following:
1 - move one of the individual album folders and it's associated data file into the new Albums folder that was created in the iPhoto Library folder.
2 - launch iPhoto. If it's successful do the same with the next album folder and data file. If iPhoto doesn't launch successfully, that's a bad one and remove it and the data file.
3 - repeat for each individual album folder in the old Albums folder.
6. Rebuild Library
QUIT IPHOTO FIRST
Relaunch while holding down the key combination below for your version
Option+Shift IPHOTO 2
CommandOptionShift IPHOTO 4
Command+Option IPHOTO 5

Lost access to Jam Pack instruments after migration to new macbook pro

I just migrated to a Macbook Pro and now all the instruments from my Symphony Orchestra Jam Pack are no longer available. I was also getting a message "Native Instruments Installation Folder not found" but after copying the instrument files into the Sampler Instruments from my old macbook to the new one, that went away, but I still don't have access in Finale to those instruments.
There's still no "Native Instruments Installation Folder" that I know of, but the message no longer appears.
Are these instruments no longer available in the new Garageband? This is a bit frustrating.

I FIXED IT!!! After AppleCare told me it couldn't be done...
I've been searching for hours online and couldn't find this anywhere, so hopefully someone with this challenge will stumble upon this.
A clue was here: http://www.techvide.com/apple/install-jam-pack-on-mac-os-x-lion
but this didn't correctly describe my issue with an early version of Jam Pack 4: Symphony Orchestra
What I did:
1. Insert Jam Pack DVD 1
2. ctrl-click Install Jam Pack 4 - Show original
3. double-click JamPack4_Instruments.pkg
4. You'll get some Power-PC Not Compatible with Lion warnings (only a few compared with the almost infinite number if you try standard install)
Instruments now appear and work just fine in garageband. <big sigh>
I wish AppleCare would know this, and I hope someone is planning on continuing supporting these Garageband instruments.

Help with 'disappeared' photos after migration to new macbook pro

So I got a lovely new macbook pro and successfully seem to have migrated everything from my old G4 powerbook. But, when I go into iphoto all 3,000 plus pictures have only the slash dotted outline and no images. Any suggestions as how to remedy this. Terence Devlin, you were kind enough to try to help me when I was having trouble with getting my pictures to export edited but we never did figure out the problem, so if you're out there and remember me maybe you can advise me here, as I don't know if anything I did in attempting to resolve that issue would impact the situation now. The pictures still exist on the other computer so it's nothing dire but it's weird to have everything look like it's there (in otherwords, the whole thing is set up exactly as my old one was, with the same albums etc.) but no actual pictures inside.... Thank you!!

To anwser my own question:
Had to highlight my User Home in finder, and then had to add myself as a user (and click the cogwheel to apply to all files within) and allow myself to 'Read and Write' in permissions.
For some reason, when I migrated across, it didn't add me as a user - even though I was the administrator of both the old and the new MBP!

Time Machine won't start after migration to new MacBook Pro.

I upgraded to a new MacBook Pro. Both machines are running OS X 10 (10.7.5 on old, 10.8.2 on new). I used an ethernet cable for the data migration.
I'm trying to use the Time Capsule we've been using all along for Time Machine, but Time Machine won't start because there's only 5.1GB free on the device and it wants to run a full backup. "The backup is too large for the backup disk. The backup requires 252.33 GB but only 5.07 GB are available."
What are my options? I'd hate to lose prior versions of all the data I've moved to the new machine, but if I have to, then I have to. But then I'm not sure how to access the Time Capsulre base as a non-backup drive and delete what's there.
Thanks for yor help.
Vince

Windows in VM is going to know it's on a different machine, so you'll still have to hop through Microsoft's hoops or you won't get updates.
Just an FYI: when moving a Fusion virtual machine, the first time you run the virtual machine, you are prompted if you "moved it" or "copied it". Selecting "moved it" will retain the UUID and prevent Windows from prompting for reactivation. (However, if it is a copy of the virtual machine and you wanted to run both copies simultaneously on the same network, you must select "copied it" otherwise the copies can't run at the same time.)
If one did select "copied it" accidentally, then just follow the reactivation prompts. As long as you're not reactivating a lot then it usually will work the normal way over the internet. Even if you're forced to call, just tell the support rep that you're reinstalling Windows and type in the really long code that they say. The few times I've had to call, it was less than 15 minutes. Again, as long as you're not reactivating a lot (so looking suspiciously like a pirate,) reactivation is a pain, but relatively quick.

After migrating to new Macbook Pro, Photoshop and Bridge constantly Version Cue Crash

I just upgraded to the new MacBook Pro and CS4 crashes any time I try to open a file. "Fatal error - missing component /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework" I've read that the best thing to do for that error is to uninstall and reinstall, but my new machine does not have an optical drive, so my old disks don't help much. Also, I bought CS4 during a limited offer for upgrades to CS1, so I had to call technical support to get it activated, so even if I did manage to reinstall (perhaps by copying my install disks to a USB drive?) I'm expecting to have trouble with reactivating. Any advice before I start tinkering?

Thanks! I deactivated it from both the old and new computers, followed the instructions here to copy the install files and it all just worked.
Strangely enough, it did not ask me to reactivate after reinstalling. It's just working. It doesn't seem to be upadating properly (I run update, and it comes up with the same 9 updates I just downloaded and applied) but I'll probably be upgrading to CS6 or creative cloud before year's end, so this will do for now.
Thanks again!

Iphoto not responding after mountain lion upgrade

iphoto and imovie not working after mountain lion upgrade?

After trying different things with apple help; I ended up re- downloading mountain lion, placing iphoto in the trash and downloading iphoto from app store...iphoto and imovie are working fine now.

DVD Burner not responding after installing Mountain Lion - Macbook Pro

The superdrive can play a disc but when trying to burn a DVD with programs like DVD2Onex, Toast and DVD Studio Pro I get an error message stating, in so many words, that the drive is either busy or not responding.
It was perfectly fine until I installed Mountain Lion.
What in the world. I got some DVDs to burn. I need to burn VIDEO_TS files, not iso, imgs or anything like that. I need to know why I can no longer burn anything since installing this terrible OS.

great

Itunes and Iphoto not responding after uploading new software

Hi
Afew days ago I did the Apple Software Update and since then I haven't been able to get onto my Itunes or Iphoto, both of which I use quite often. Itunes just doesn't load at all and Iphoto starts to open the page but then doesn't respond at all. I am just wondering why this is happening and whether it's happened to anyone else at all? Ideally I'd like to get rid of this new update but don't know how to go about it. I'm a bit of a computer dunce so if you could offer any solution in a straightforward way I would be so grateful. Thanks!

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to iTunes or iPhoto for Mac OS. You should post related questions in the iTunes and iPhoto forums

I can't find my data after migrating to new MacBook Pro

I just finished migrating data from an older model MacBook Pro to a newer one both using OS 10.9.5. After the migration I can no longer see or access my backups on Time Capsule. It may be a permission problem. Any suggestions?

After the migration I can no longer see or access my backups on Time Capsule.
You have a new Mac. Have you been backing up the "new" Mac? If not, that Mac has no backups...yet.
You do have backups of your other "older" MacBook Pro though.
You cannot "add on" or "continue" backups of the new Mac onto backups of the older Mac.
If you want to see the backups of your "older" Mac.......right-click or try control-click or option-click the Time Machine icon on the dock and select Browse Other Time Machine Disks

IPhoto Not Responding after Migration to new MacBook

Similar Messages

Maybe you are looking for