IPhoto not showing RAW pics, and crashing on Create New Library

hi there
i was just organising (tagging, deleting) pics in iPhoto 9.1 when the RAW pics started showing up as just blank placeholders - i'll clarify that: they were showing previously, however my perception of them 'disappearing' may have been between iPhoto sessions.
my iPhoto library is mostly JPEGs, with the RAW pics being a recent addition courtesy of a Canon EOS 5D MkII. the iPhoto library resides on a 500GB external harddrive. the iPhoto library was backed up by way of copying the entire iPhoto folder from the 500GB external harddrive to a separate 1TB external harddrive - this back-up process was done prior to the addition of more recent RAW pics, and the memory card from which all the RAW pics came from has been wiped several times since. some RAW pics taken in December 2011 are showing; none of the RAW pics taken in January 2012 are showing.
what i've done so far:
1. Option-Command-opened iPhoto and ticked all boxes to rebuild the library and the RAW pics are still not showing. this rebuild process has been done at least three times now.
2. opened the iPhoto Library (via Show Package Contents) and confirmed that the pic files are still there in the Masters folder. (they are identified by the date the photos were taken, the CR2, and can be viewed in Preview.)
3. installed the iPhoto 9.2.1 Update and the RAW Camera Update 3.9, with no change in the RAW pics' visibility.
4. Option-opened iPhoto and -
a. - created a new library (on the 1TB external HD, separate to the 'backup') into which i -
b. - tried to import the entire iPhoto Library from the 500GB external HD but -
c. this import ended in an "iPhoto quit unexpectedly" message. unfortunately, i did not keep the error report for this.
5. Option-Command-opened iPhoto to create a new library on the 1TB HD but this has ended abruptly in an "iPhoto quit unexpectedly" message. this has happened twice, and i have kept one of the error reports.
6. downloaded and installed the latest iPhoto Library Manager and -
a. - tried to Rebuild the library but -
b. - iPhoto quit unexpectedly - i have kept this error report - while -
c. - iPhoto Library Manager gave the error message "'iPLM'/'ADDK' (returnID 3)".
interspersed with the above steps, i have run Disk Utility Repair Permissions after each crash.
so.
i know the files are still there. but iPhoto won't show them. i've trawled these forums and done - or tried doing - some of the fixes, all to no avail.
please can someone help.
david mamea

this is from the last error report (step 5 of my 22Jan12 1142 post above):
Process:
iPhoto [2588]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
9.2.1 (9.2.1)
Build Info:
iPhotoProject-628000000000000~3
Code Type:
X86 (Native)
Parent Process: launchd [2471]
Date/Time:
2012-01-22 11:11:23.578 +1300
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Sleep/Wake UUID: A5D90A7D-4923-4807-925C-7572A3FDC25F
Interval Since Last Report:
225 sec
Crashes Since Last Report:
1
Per-App Interval Since Last Report: 3 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:
9111BA25-4BC3-453F-8171-C05AFE66124B
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000058723f2f
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   com.apple.ImageIO.framework
0x94afd4cb CFMutableDictAddProperty + 101
1   com.apple.ImageIO.framework
0x94a22aba CGImagePluginReadRawXMPProps + 60
2   com.apple.ImageIO.framework
0x94a823ac _CGImagePluginInitPSD + 1769
3   com.apple.ImageIO.framework
0x949e5334 makeImagePlus + 690
4   com.apple.ImageIO.framework
0x949eba0e CGImageSourceCreateImageAtIndex + 176
5   com.apple.iPhoto
0x00099e52 0x1000 + 626258
6   com.apple.iPhoto
0x00099d68 0x1000 + 626024
7   com.apple.iPhoto
0x009bb203 0x1000 + 10199555
8   com.apple.iPhoto
0x00069c0c 0x1000 + 429068
9   com.apple.iPhoto
0x00067dc8 0x1000 + 421320
10 com.apple.iPhoto
0x000664ce 0x1000 + 414926
11 com.apple.iPhoto
0x000663f9 0x1000 + 414713
12 com.apple.Foundation
0x98735409 __NSFireDelayedPerform + 537
13 com.apple.CoreFoundation
0x971c9a6b __CFRunLoopRun + 8059
14 com.apple.CoreFoundation
0x971c73f4 CFRunLoopRunSpecific + 452
15 com.apple.CoreFoundation
0x971c7221 CFRunLoopRunInMode + 97
16 com.apple.HIToolbox
0x952c2e04 RunCurrentEventLoopInMode + 392
17 com.apple.HIToolbox
0x952c2bb9 ReceiveNextEventCommon + 354
18 com.apple.HIToolbox
0x952c2a3e BlockUntilNextEventMatchingListInMode + 81
19 com.apple.AppKit
0x92e8d595 _DPSNextEvent + 847
20 com.apple.AppKit
0x92e8cdd6 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
21 com.apple.AppKit
0x92e4f1f3 -[NSApplication run] + 821
22 com.apple.AppKit
0x92e47289 NSApplicationMain + 574
23 com.apple.iPhoto
0x0001159a 0x1000 + 66970
24 com.apple.iPhoto
0x00010a29 0x1000 + 64041

Similar Messages

Iphoto not showing all pics in the library

I recently found pics in my iphoto library that aren't showing up in iphoto. Is there a way to make iphoto scan all of the hard driveor rescan the library to 're-find' pics?

bgwarch:
Welcome to the Apple Discussions. Where are these files located? If they are in side the iPhoto Library/Originals folder you can try rebuilding the library by launching iPhoto with the Command+Option keys depressed and following the instructions to rebuild the library. Select all the options, especially the one regarding orphaned photos.
If they are in a folder titled Imports or something like that drag the folder to the desktop and import them from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

IPhoto not showing photos in Modified folder

I have an issue uploading photos into facebook. I use iPhoto to manage all of my photos on my iMac, and I created different albums to organize photos. When I try to upload some photos into my facebook, only the photos in Original folders show up in the albums, and the ones in Modified folders are missing. When I open album directly in iPhoto, all the photos are there. This happens both in Safari and Chrome. Is there a way to fix this so that I can see all of my photos when I access iPhoto albums from the browser?

iPhoto 09?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

IPhoto not showing all photos

I have iPhoto '11 v 9.4.3. Some time ago I noticed that certain events in the event view were showing up with zero photos in the event, with a gray palm tree sunset as the key photo of that event. When I go to import pictures from my camera, iPhoto reports that photos in the camera are duplicates of photos already imported, but it shows a blank for the imported photo. Since iPhoto seems to know they are there, I don't re-import. When I go to the Finder and look for the "missing" photos, they are there in the iPhoto Library (under Masters). So, my question is, why does iPhoto know they are there but can't show them? And how do I fix it? And BTW, they have not been made hidden in iPhoto.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

IPhoto not focusing after zoom / occasional crashes

I've noticed lately that sometimes when I press 1 or 2 (or adjust the slider) to zoom in on a photo, the photo does not become focused.
Normally when I zoom the photo is not immediately focused and then it snaps into focus a fraction of a second later (try holding down the slider and zooming to see what i mean. when you let go of the slider it focuses). For some reason, lately, after editing photos for a few hours it no longer focuses and I need to quit and restart iPhoto in order to regain functionality. Does anybody else notice this behavior or know how to fix it?
Also I noticed iPhoto taking up crazy amounts of ram (as much as 700 MB of real physical ram) and cashing occasionally. I hadn't had an iPhoto crash since before my upgrade to iPhoto 5 but now I'm getting crashes every few days. Any idea if these issues could be related?
My library is approaching 3500 pictures. I recently started shooting in 8 megapixels with my Panasonic FZ30 (I used to use mostly a Canon 3 megapixel S1 IS). I'm wondering if either the library size or the large photo size could be causing these problems.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My new 4S iphone is not showing in itunes and have followed all trouble shooting tips???

My new 4S iphone is not showing in itunes and have followed all trouble shooting tips. It does show in iphoto and wants to download photos. Any suggestions???

I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Ipod Nano icon not showing in itunes and I've tried everything suggested

My ipod nano is not showing in itunes and I've tried everything that has been suggested by Apple. I updated iTunes, I've reset the ipod. I just want to download my songs! Help! Please and Thank you.

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Mail app not showing some png and pdf attachments.

I'm using the iPhone 4s and recently, both mobileme and yahoo email accounts are not showing some png and pdf attachments. I'm seeing the attachment is there, but it doesn't load. Load remote images is turned on in settings. Does anyone have the same problem and a solution/explanation?

My work email account is an IMAP account.
I removed my work email account on my home computer this morning to test out this problem on my computer at work. I just sent a test message to my work account from my iPhone. My iPhone, iPad and computer at work still have my work email active on them and all the devices are showing the test message as new and unread. The problem seems to be that when I have my work email activated on my home computer, the messages do not show new and unread on the rest of my devices.

My Nokia 5230 has not showing the Photos and video...

My Nokia 5230 has not showing the Photos and videos(from Memory Card) in gallery. and Music library has not updating. Please send me the solution.

It has been released 3.3 version of NS which is working fine with Thunderbird
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

IPhoto not showing image for editing

In iPhoto, in events, I click on an event, then highlight a photo. When I double click the thumbnail, I see a preview but when I click that to edit or if, on the thumbnail, I right click>"edit in iPhoto", all I see is a blank screen. If I highlight the thumbnail and click Reveal in Finder>original file, I get "can't find it" or if I click >modified file, I get iPhoto library>previews>the file. I have by shear accident been able to find iPhoto>masters and see that the original files are still there. How can I get back to iPhoto finding the masters and allowing me to edit?

If I highlight the thumbnail and click Reveal in Finder>original file, I get "can't find it"
Your library is corrupted. Try restore from your back up. If that fails:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

HT4623 My iPhone 4S does not show ringer bar and i now need to use ear phones to listen to music

My iphone 4s is not showing ringer bar and i cant listen to music without earphones

Hey chirambab,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s in regards to audio.
The following resource may provide a solution:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
- Try turning off Bluetooth.
- If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M.

Why did ps touch does not show saved project and my old project disappear?

Why did ps touch (ipad 4) does not show saved project and my old project disappear?

OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work.

L9 does not show my MPC (and other) Groove Templates?!

hey all
When i open a project from L8 (that had all my groove quantizes on it) in L9, they do not show
any ideas?

OK, open a new blank project in the arrange page, If you have a standard temple, pull this up. Go to the media browser and select one of the files to be converted, do this one at a time ( i.e. MPC then ASQ etc. )
Pull the file onto the arrange page on an instrument channel, select the whole thing, go to the top of the inspector window, at the top you'll see quantise, scroll down till you see "make groove template" and select it.
Now if you've done it right the grooves should appear in the quantise window at the top of the piano roll window.
Step 2: Select the midi part you've just converted to grooves, Right ( cntrl ) click/pack folder. On the channel it's sitting on, select it to be no output, lock the channel ( View/ configure track header... protect, when the padlock appears in the track thing at the side click the padlock, it'll turn green )
repeat as above till all the grooves appear in your quantize.
Step three, save as template, save as Autoload.logic ... overwrite.
This will now be permanent for all of your new projects.
Happy days.

IPhoto not showing RAW pics, and crashing on Create New Library

Similar Messages

Maybe you are looking for