IPhoto not supported in Classic Mode

I'm trying to open iPhoto. The file has a circle with a line through it saying it can't be opened because Classic Mode is no longer supported. We can't access our pictures.

Are you sure that you are launching iPhoto '11?
Did you double-click or right-click-open the application directly, or did you launch it some other way?
Did you migrate applications from some older system? Might you be launching the migrated iPhoto instead?

Similar Messages

Objects (XMLType) not supported in nonblocking mode?

Hi,
In 11g OCI guide Nonblocking mode section,
it said "The following features and functions are not supported in nonblocking mode:...objects".
It looks like if we're selecting embedded objects like XMLType, we can't use nonblocking mode.
In fact, when I set nonblocking mode on my previously working simple program that selects XMLType from a table, it does not work anymore and returns ORA-03123 right away.
In GUI or transaction-based application that needs to select embedded objects like XMLType, I'm wondering what approach can be done to make those select nonblocking?
thanks,
Terrence

Are you sure that you are launching iPhoto '11?
Did you double-click or right-click-open the application directly, or did you launch it some other way?
Did you migrate applications from some older system? Might you be launching the migrated iPhoto instead?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

IPhoto - "not supported on this architecture" after leopard install

after upgrading to leopard it seems to have deleted my iPhoto all together and when I click what is left of the application I get a window alerting me that iPhoto - "not supported on this architecture" How can I restore?

What version of iPhoto is it?
Did you do an Upgrade or Erase Install?
Have you tried re-installing iPhoto? To do this, go first to HD/Library/Receipts and remove any pkg file there with iPhoto in the name. Then re-install iPhoto from either an iLife disk or System Restore disks that came with your computer.
Regards
TD

HT201386 Why is iphoto not supporte by ios8 anymore??

Why is iphoto not supported from ios8 anymore?! I put alot of work in slideshows and now i cant use them anymore?! That really makes me angry, why are u keep making it worse and more complicated than it already is with every new update!

Please write this to Apple using the feedback form, so the developer team will see it. This is a user-to-user forum, and we cannot do anything about it.
Use this link: Apple - iPhoto - Feedback
Why is iphoto not supported from ios8 anymore?!
Making iPhoto run on iOS8 would have required to a major upgrade and rewriting of code, since the the parts of iOS that support image processing changed considerably. Apple decided to release a new Photos.app to replace iPhoto instead of upgrading iPhoto. See this help documents:
Migrating from iPhoto for iOS to Photos on iOS 8
Get help finding your Photos in iOS 8
When you send feedback to Apple, be sure to request the features that are missing from Photos and need to be upgraded, if Photos is really to be a replacement for iPhoto. So far, Photos is very basic, and does not yet offer, what has been lost by killing iPhoto.

IPHOTO not supported

I am new to the Mac family and have many questions, but will limit to this one for now. I tried to open iPHOTO to learn how to use this app.and received this error message [This application iPHOTO cannot open because it it not supported by this architecture.] What did I do now. The Mini is about a month old.
Mac Mini Mac OS X (10.4.9)

I agree with TD about returning to the vendor and getting the correct versions of the iLife applications.
But before you do, run Pacifist on the system install disk that came with your Mac to locate and install the iPhoto version that's on the disk. Then see what version it is. If that one is not a universal version then you need new system disks with the correct software. Classic only application are not included with intel Macs, only universal applications.

IPhoto not supported by OS X 10.9.4 update on MacBook iPhoto.

Since I updated to OS X 10.9.4 on my MacBook Pro, I can no longer access iPhoto. I get a message that iPhoto is not supported on my Mac. Is anyone else having this problem? Don't know where to begin.

The photos are located in your iPhoto Library package which, by default, is located in your Pictures folder and is independent of the application.
What system are you running? If it's anything earlier than Yosemite you won't be able to download iPhoto as the only version available from the App Store is 9.6 which only works with Yosemite.

IPhoto not supported on my Mac

Using Macbook from 2008. Upgraded to OS 10.8.2 (Mountain Lion). Installed iLive 11. When trying to open iPhoto, I get the message "Cannot open iPhoto because it is not supported on this type of Mac." What's wrong? Thanks for any feedback

Where did you install iPhoto 9 from?
OT

Iphoto not supported by architecture.

I accidently replaced my working version of iphoto with a version which is "not supported on this architecture" I have the install disks but am concerned about losing my pictures and videos. I cannot open my library either but can see the photos under search for.....all images. If I install again what do I need to delete first and will I keep my photos?

sfeh
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Re-installing the application will not affect your photos. That said +Always always always+ back up before doing some thing like this.
Regards
TD

HT1338 old iPhoto not supported with OS X

iphoto has disappeared and when I check for it with Finder, it says I can't use this version (9.1.5) with OS X. How do I get a newer version?

See this discussion and Old Toad's post. Hope this helps.

Workflows Do Not Start - "Not Supported in Windows Authentication Mode"

I have a publishing site that is using Kerbos authentication. Everything on the site works fine.
I created a simple workflow in SPD 2013 and published this to the site without any problems. However when I try to start the workflow with the account of a user who is a member of the site it will not run. In the browser an alert pop's up
saying "Something went wrong. To try again, reload the page and then start the workflow again".
In the SharePoint log's I find the following:
SharePoint Server Workflow Services aj5oh Exception System.NotSupportedException: Not supported
in Windows authentication mode. at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser) at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext
context) StackTrace: at Microsoft.Office.Server.Native.dll: (sig=1f86b0bf-2440-4b16-9099-860a571153c2|2|microsoft.office.server.native.pdb, offset=131CE) at Microsoft.Office.Server.Native.dll: (offset=21C85) 799af29b-db87-0034-c938-8a35e4082ffc
This is a dev environment where everthing is setup on a single box, and I registered the workflow service in HTTP mode (which I allowed during the installation of workflow manager).
Any ideas on what the problem might be?
Thanks,
Richard

You haven't changed it to Claims there, you have changed NTLM to Kerberos. I guess your web app was already claims based because in SP 2013 we have to use Powershell to convert classic to claims and not from GUI.
When I click the workflow on a item to start in manually I get the error:
"Something went wrong. To try again, reload the page and then start the workflow"
In ULS I get the not supported exception.
It seems 2013 platform workflows aren't supported in classic mode web applications:
http://sharepointconnoisseur.blogspot.co.uk/2012/11/sharepoint-2013-upgrade-preparation-to.html
But I am not able to publish 2010 mode workflows in the classic web application, SPD 2013 throws error while publishing:
"Unexpected error on server, wf cannot be associated"
So does Infopath while publishing on to a list in that web application:
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Mac mini on a LCD TV which does not support interlace mode

Dear all,
I am going to buy a new Mac mini and I wish to connect it to a Samsung LCD TV 37A656A1F (serie 6.
The TV manual says that it does not support the interlace mode. I then deduce that it supports progressive mode only.
My question: Does it mean that this LCD TV model cannot be used as a monitor for a Mac mini?
Please give a help to me

All computer monitors are progressive mode displays. Therefore all computers, including the mini, are very comfortable running progressive mode. It is their natural state. It is more a problem when a computer has to run interlace mode in order to support a display. That is when there is trouble. So I think you have nothing to worry about if your Samsung runs in progressive mode.

Mac Air not supporting iPhotos

Just updated ios8 on iPad and phone and both seem to have worked. Did the same on my mac air (version 10.9.5.) and now I cannot access my photos on the laptop. Message comes up saying iPhotos not supported by the mac. What have I done wrong and how do I correct it? Thanks for advice in advance.

Did the same on my mac air (version 10.9.5.) and now I cannot access my photos on the laptop. Message comes up saying iPhotos not supported by the mac
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
WARNING: If you use iTunes to sync photos between your iPhone or iPad and your Mac do not activate the iCloud Drive. Doing so will kill the capability of using iTunes to sync with your mobile device.
Also it will disable Documents & Data syncing for your iCloud account on OS X Mavericks and earlier Macs, as well as iOS 7 and earlier devices.

Oracle doc says Custom Portlet Mode are not supported

Is it true that WebCenter does not support JSR 286 custom portlet modes unless they are predefined Oracle-PDK portlet modes?
http://docs.oracle.com/cd/E17904_01/webcenter.1111/e10148/jpsdg_java_adv.htm#BABEAHHD
"If you are coding portlets to JSR 286, then you can declare custom portlet modes in the portlet.xml file that map to the extended modes offered by PDK-Java, or to accommodate any other functionality you may want to provide."
"Arbitrary custom modes that a third party or custom portlet producer offers are ignored and therefore not supported."

WebCenter does not support custom portlet modes. I've tested and answered this.
Oracle WebCenter supports a fixed set of custom portlet modes defined by oracle. This is bad.
Custom portlet modes are a JSR 286 standard. How is it possible that WebCenter does not implement it.
Therefore, it you have a custom portlet mode such as "viewBooksMode", then you must change every mention of it in your project to "about" or "preview" or "help" or "print".

HT204655 Photos for Mac does not support semi professional camera Nikon D7000!

Since Nikon does not support USB storage mode, the (semi)professional line of Nikon cannot be used to import pictures!!
This is a serious flaw in the program. Aperture supports Nikon D7000, Image Capture supports the camera but the latest and greatest has forgotten all about supporting market leader's camera's?
The main and only reason NOT to use Photos... Or did I miss something here?

Sorry guys, forget all about it. I switch my camera off and on again (while it was connectoed to the Mac) and it appeared in Photos.
No idea what happened, but I can import my pictures.
Cheers,

IPhoto not supported in Classic Mode

Similar Messages

Maybe you are looking for