Iphoto not working after a Mavericks update. Any suggestions?
I have just updated to Mavericks and iphoto has a line through the App saying it is the wrong version.
I then updated the App for iphoto via the App store and it still won't work. Any ideas? I also downloaded the latest ilife from the App store too.
Pretty cheesed off. Any suggestions please?
You need to reinstall it:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Similar Messages
-
Why has my calendar not worked after os maverick update?
Calender will not finish importing to server, why?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
Wifi not working after latest iOS update
wif not working after latest iOS update 7.0.4. Any suggestions?
Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor
-
HT201366 CAC readers not working after installing security update 2013-003?
Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.
For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod. -
Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver
Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Mp600r does not work after installing mavericks 10.9 what do I do now ?
Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?
This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500 -
Camera (Skype, FaceTime, iChat) not working after installing Maverick OS
camera (Skype, FaceTime, iChat) not working after installing Maverick OS
kwmaclean wrote:... same problem...
If How to Troubleshoot iSight doesn't help, Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.9 -
Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.
OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No! -
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
Hi, I bought an iPhone5 in Sydney on 17 Sep 2012 (through Apple online store-Weborder no. W425361396) while I was studying there. Now I already went back to my home country (Thailand). And I got a problem with my iPhone5. The Sleep/Wake button is not working. Do you have any suggestions how can I fix this?
Looking forward to hear from you.
Best regards,
ApiradeeYou will have to return the iPhone to Australia .The iPhone warranty is not international .
Warranty and service is only provided in Country of original sale
You could try a reset followed if required by a restore initially with backup and then again if required as new
If that makes no difference it will be a hardware issue and you will have to return it to Australia -
I need a good reliable office suite. Open Office is not working well for me. Any suggestions?
If you mean Open Office is not always able to correctly open documents received from clients created with MS Office, then the only real solution is to purchase Office 2011 for Mac. As good as some of the free alternatives are, they can't duplicate every feature of MS Office.
-
Hi,
My HP Laserjet 1020 not working after upgrade to Mavericks.
Please provide a solution to make it work. Thanks.
PercyCheck Software Update and HP tech support for updated drivers that will work with Maverick.
-
Mail not working after installing Mavericks
Mail stoped working after installing Mavericks!
Check this out. It worked for me and is related to a problem in Accounts.plist...
The problem was caused by dodgy entries in the accounts.plist file in my User Library folder. It appears that either when I upgraded to Mavericks this file gained hundreds (possibly thousands) of spurious entries, or maybe these entries were in there before but previously the OSX/Mail combination was more tolerant. When I removed these the problem with Mail disappeared. Here’s what I did….
1> Make the user Library folder visible - in Mavericks this is a lot easier than Lion/Mountain Lion. Simply open up your user directory in Finder, select menu View>Show View Options, and select “Show Library Folder”
2> Navigate through username>Library>Mail>V2>MailData and select the Accounts.plist file. If this file is multiple megabytes (mine was 40+mb) then this is likely the cause of your problem (once sorted mine ended up at 19k in size!)
3> To be safe, make a copy of this file (I placed the copy on my desktop).
4> Using your chosen text editor (I used Text Wrangler but I’m sure TextEdit would work just fine) open the Accounts.plist in the MailData folder (not your backup copy) and take a look. If it’s the same as me you will find hundreds and hundreds of entries for the same mailbox repeated in there. Mine was an old MSN mailbox that I never use any more (I’ve seen in other forums that other Hotmail type accounts also seem to be the culprits in this context). There will likely be two lots of repeated data, one in the XML “DeliveryAccounts” <array> section, and one lot in the “MailAccounts” <array> section.
5> Delete (keeping in mind the need to select the XML sections correctly from <dict> to </dict> completely) all those extra entries that you found, keeping the mail accounts you do need, in the XML and save the file.
6> Mail should open up nice and fast again and not eat your system
7> If this did not work, and causes problems because of over eager deleting in <5> you can replace your broken Accounts.plist file with your backup and try again.
Maybe you are looking for
-
I just downloaded the new version of itunes to my computer. Now I cannot load my ringtones that I have made from garage band on my iphone to my itunes library to save them on my iphone. Anyone know how to do this yet on the new itunes?
-
Forums closed for maintenance/upgrades – April 3 – 5, 2009
The Adobe Online Forums will be closed from 3pm (Pacific Time) on Friday April 3 through the weekend. We will re-open new forums on April 6. Thank you for your patience during this forum outage.
-
MRU Error : Current version of data in database has changed since user init
When i use HTMLDB Wizard to create Master Detail Form (You can see step by step what i doing by see this url : http://jroller.com/resources/w/wildan83/MRU%20Error.pdf The is error in MRU : Error in mru internal routine: ORA-20001: Error in MRU: row=
-
Hello, i'm using Leopard and want to know if there is a way to get a time machine backup status report by e-mail It's important for us to know every day if time machine was able to backup ok or if there are problems. thanks for suggestions Marco
-
Cannot change calendar default reminder setting
When my calendar reminder pops up it gives me the option to end the reminder or snooze for a preiod of 5 mins. This is far too short so I went to Calendar, Options, General Options and under Actions set the Default Reminder to 15 min and saved the ch