IPhoto or Final Cut bug: export creates 19 stereo tracks attached to file!

I am exporting three slideshows from iPhoto '08 to Quicktime to be placed in a Final Cut Pro project. The first two exported fine. The longest one (just over ten minutes) exports and plays in QuickTime, but when you import to Final Cut, it mysterious has 19 stereo tracks attached, and won't play unless you remove all of those tracks (hence, no music) Again, the shorter two come in just fine with one stereo pair, as you would expect.
I installed the iPhoto update, tried again, still the same thing...

Ryan:
Is it just that one particular slideshow or will any slideshow exported and imported to FCP display that problem? Also, if you have Quicktime Pro, open the problem file with it and check to see if if contains those 19 tracks. If not, then maybe FCP is causing the issue.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • Can one use Final Cut Express to create a multi-track CD?

    I like the editor in FCE, and have used it to break up an audio recording of a concert into all the tracks, with chapter markers. Now is there a utility that will make this into a CD?
    The slow way is to export each chunk as an audio file, and then import them all into iTunes and burn a CD from that.
    There must be a quick way!
    Maybe I'm asking in a slightly odd place, so recommendations of somewhere else to ask (shame there's no iCD !) also appreciated.

    There's no direct path from FCE to an Audio CD that I'm aware of.  If the audio consists of individual clips in the Finder, you could just use them in iTunes or Toast to create the Audio CD.  Either app will convert the 48khz audio to 44.1khz for the CD.
    Otherwise you'll have to cut the audio into the individual tracks as needed.
    -DH

  • Every video put into Final Cut Pro exports in horrible quality regardless of format/settings.

    Hello fellow Mac enthusiasts,
    I'm having a problem which may or may not have been plaguing my studio since day one. Every video that we edit in Final Cut Pro exports in MUCH lower quality than it was when it was imported, not only that, the file size of the newly exported video is several times the size of the original. What I end up getting is a file too large for our clients to email around. We recently had a client come into our studio with a flash drive full of 15 second avi's no larger than 900 KB, he wanted a few of them edited together with simple cross fade transitions, and even a few seconds of dead space cut out. He needed them to be the highest quality possible for a powerpoint presentation he may now be unable to give. At first I exported them as Uncompressed avi's, best quality, thousands of colors, and no sound. The resulting file was not only blurrier, but now 260.5 MB!! And that one was with zero edits! The original was 803 KB and crystal clear. So after that I decided to try a few tests. We also produce a bi-weekly hour-long local television show, which looks fine on television but now I'm wondering how much better it could and should look. I've been exporting that out as a Quicktime, Apple ProRes 442 HQ, Interlaced bottom-field-first, zero filters, both compressor native and NTSC 720 X 480. I attempted this method on the client's original 803 KB with zero edits and not only did it export a completely unusable video compared to the original, but it was now 57.1 MB. What is going on here? Is Final Cut conspiring against me? I'm guessing it's something in my settings which I'll shamefully admit I know absolutely nothing about. Could anyone help a struggling video editor do his job?
    Joey

    Hey guys sorry it took me song long to respond it's been a busy week filled with many things not relating to final cut...
    In response to David's post, the original file is indeed larger than 720X480, though it's dimensions are not available to see in the 'more info' associated with the file itself. By comparison, the apple pro res LT file I exported through final cut of the same avi file is 720X480, and looks significantly worse.
    [URL=http://imageshack.us/photo/my-images/87/screenshotofavis.png/][IMG]http://img87.imageshack.us/img87/5421/screenshotofavis.png[/IMG][/URL]
    This was after I created a new project, made the sequence settings into Apple ProRes lt 30p under the audio/video settings in Final Cut, and exported it as the same with 'current' dimensions (it was listed as 850X637, maybe that was the original?) Although I did have to render the original avi itself once it was placed in the timeline. I guess there's no way to know exactly what sort of avi my original file is so I can match my sequence to it? The 'more info' (to be fair im sort of used to 'properties') leaves something to be desired..
    I guess my question is: what else can I change in my settings to leave the quality of the video intact, if anything?
    Thanks everyone.

  • Final cut x - export and youtube

    hi all. I am just trying to work out what has gone wrong here.
    Using final cut X exporting using compressor.
    here is my youtube chanel for info as well.
    http://www.youtube.com/channel/UCy-etfi_vg_Cwkjz3zOAtPg
    I just uploaded a video i created yesterday. I shot it in 1920X1080 @ 50 FPS, edited it in fincal cut, and exported it in compressor with the default settings for
    HD 720. here is a copy of the information in the file.
    Name: HD 720p
    Description: HD 720p for upload to web sharing sites such as YouTube and Vimeo
    File Extension: mov
    Estimated size: 4.61 GB/hour of source
    Audio Encoder
              AAC, Stereo (L R), 48.000 kHz
    Video Encoder
              Width and Height: Up to 1280 x 720
              Pixel aspect ratio: Default
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls: Automatically selected: Off
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 75
              Min. Spatial quality: 25
              Temporal quality: 50
              Min. temporal quality: 25
              Average data rate: 10.24 (Mbps)
    Compatible with Mac
    My question is that the output video is the quality I wanted, and have uploaded to youtube before, as you can see some of the other videos there, but when I uploaded this video (thank you video) the quality is jumpy and nasty and I am not really sure what happened.
    I am also using the panasonic HC-V520m full HD camera.
    any info would be great.

    Hello Serenity99.   In my rather limited experience with this, I have had much success with just copying and pasting the project from within FCP X.  All of the properties (retiming, themes, effects, music, sound effects etc.) copy over exactly between the two, which is great.  The only thing is that while the transitions and retiming copy over in the one go, you may have to go back and copy and paste any titles seperately as they are placed above the clips (well in my case they have been) but they will copy over nicely and as previously configured.  I have not found this to be a big hassle at all.  I was releaved to find that the process was as easy as it was.  Mind you, I have not has as hiccup free a time with copy and pasting from other applications like iMovie to FCP X.  Although I can select and copy the projects, all the other editing and rejiging has been jumbled and required much reworking.  But if you stick to within FCP X it is easy as pie and works wonderfully.

  • Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

    I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
    I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

    Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

  • Self Contained Final Cut Pro Export Files unreadable in New Final Cut Pro 7

    Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.

    VideoJunkie88 wrote:
    Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.
    Hi VideoJunkie
    I have not come across this. However, my previous FCP 6 Self-Contained Exported ProRes 422 standard (not HQ) files which are actually 1440 x 1080 will only playback in the new QT version 10 using that aspect ratio (whatever the actual screen ratio is at 1440 x 1080, I'm not sure, but the video width is squashed together... I suppose it has something to do with showing it in square pixels versus rectangle... or do I have that turned around. I'm not sure, I have always been confused about the ProRes 1440 x 1080 format, all I know is it plays back properly in 1920 x 1080 when I transcode it for DVD or ATV, iPhone etc..). In any case, you need QT player 7 (standard or pro version) to display these files at the intended aspect ratio of 1920 x 1080. The old QT Pro player version 7 will let you change this in the properties window, but the QT 7 standard player will not let you (those options are grayed out) and the new QT X player doesn't even show these options (i.e totally unavailable).
    Also, these previous files will play just fine (for me anyway) in FCP version 7. If you having a different issue where they will not play at all, then I'm not sure how to help you, but I just wanted you to be aware that my old self-contained files from FCP 6 do work (for me anyway) in the new FCP7 under Snow Leopard.
    (ADDED) I must ask, what codec were your previous exported self-contained QT movies? Do you have this codec on the commuter your trying to play your old master self-contained exports on?
    Ron
    Message was edited by: videocrafter

  • Iphotos into Final Cut Express?

    How do I import photos from iphoto into Final Cut Express to make a hi-end slide show? I'm new to FCE, so I appreciate any help you guys could give!

    Carolyn
    Personally, I did use PhotoToMovie quite a lot. It has a nnice clean interface. I checked out the Fotomagico a few times, but the app seemed fussy and cluttered (YMMV). However, I needed to do a big project last autumn using a little animation (largely done with wipes) as well as the slides and I finally got - to some degree - comfortable with FCE.
    Where FCE really began to shine was after the big work was done. We had a slideshow with motion graphics (pan and scan) plus a narration. When the client wanted to drop a sentence from the narration and change another it was a few seconds work. Literally. For that kind of control there is nothing in PhotoToMovie or the other apps that will even come close.
    My advice is -and this and a dollar together might pay for a coffee - is to stick with FCE. When you have a problem it has many more ways to solve it than the others. Further, for my money, the time it takes to learn the app is well repaid: remember the learning you do on the montages will also feed into the video work and vie versa. You'll be learning one tool, not two.
    Regards
    TD

  • Why won't my final cut 7 export my entire :30 movie in pro res 422 60i

    Why won't my final cut 7 export my entire :30 movie in pro res 422 60i?
    And some transitions are not rendering properly.

    Post this on the Final Cut Studio forum. This is the FCPX forum.

  • HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

    Hello:
    I am very much a novice with Final Cut.  I am trying to import some video files from  my desktop but keep getting an error message that says, "File error  1 file recognized, 0 access denied, 1 unknown".  The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1).  Can someone help?  Thanks, Paul

    You can't import MPEG-2 files directly to FCP X.
    Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

  • I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works - what settings do I need to use to make aiffs work?

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

  • Final cut bugs when I want to export fcp project in FLV format

    Hy, when I did a fcp project, I export it well in QTime conversion to have .mov file.
    But If I want to have a flv file after doing my fcp project, and try to export in flv, Final cut is taking a long time and after few minutes doesn't answering. Can you help me, I have a lot of files to export first in .mov and after in flv. thank you

    http://discussions.apple.com/thread.jspa?threadID=1705856&tstart=0

  • General Overview on How to use Final Cut Studio to create a Blu-Ray DVD

    I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took about 100 short video clips (HD 1080p) and 570+ still photos with my Canon 7D. I have experimented with some pieces of the software and have created a Blu-Ray disk using Final Cut Pro and Compressor. However my goal is to create this DVD with menus that will play short clips (some narrated) and still photos(also some narration). I did a short one in DVD Studio Pro this morning but need some general guidance on what progression and programs to use to create this project. I was not able to take my video from the Studio Pro Sequence I created for my 1st DVD I had to take the original clips which were processed using Apple ProRes 422 and copy them in one at a time and then find the audio (on the voice overs) I created and also place them into DVD Studio Pro one at a time. I obviously need some guidance on the proper progression.
    Any help would be greatly appreciated.

    Here's the situation...
    DVD Studio Pro will not do the trick for you - it doesn't do blu-ray discs. If you want to do Blu-ray you've got to use either Final Cut Pro's "Export" command or Compressor's "Burn Blu-ray disc" template. The downside to both of these approaches is that you can't burn more than one title (or movie, etc.) using Final Cut Studio.
    To do what you want to do, you need Toast (at least). Toast will auto-generate menus but will let you put more than one title per slide (so you can put multiple slideshows on the same disc).
    If you want to do full-on customizing of menus and multi-level menus, for that you need Adobe's Encore.
    My suggestion - Get Toast. Encore is close to $800.
    Here's your progression (at least the one I use).
    Edit in Final Cut Pro (ProRes 422 is fine, ProRes 422 LT would do the trick as well)
    Export as QuickTime movies (original settings)
    In Compressor using the H.264 for Blu-ray setting and Dolby Digital setting and create elementary streams for video (.264 file) and audio (.ac3). Make sure these files have identical names except for the extension.
    Using toast, add the video file to the Toast project and it'll find the audio file.
    Burn away!

  • Final Cut Pro exports very low quality video to DVD

    I tried exporting a timeline to a DVD from Final Cut Pro X 10.0.3 today. Every clip in the timeline was 1080x1920, but the DVD export menu insisted (without offering an option to change settings) that Final Cut export at 720x480. The Blu-Ray menu offers 1080x1920 exporting, though. Is there any way to get the app to export to DVDs at 1080x1920?

    Yes, you can create an AVCHD Disc which is basically Blu-ray quality on a cheapo standard DVD.
    Select Share>Blu-ray and in the window that opens make sure the Output Device is your DVD burner, not the hard drive.
    Note that you will only get about 35 minutes at the highest quality.
    If your video is longer the data rate will be reduced but should still produce good quality hi-def up to an hour or so.
    You must play the DVD in a Blu-ray player. It will not work in a normal DVD player.

  • Final Cut won't create correct Quicktime

    I am trying to create a Quicktime file from a sequence. My Sequence codec is DV NSTC 48kHz
    When I go to "Export>Quicktime Movie" and save it without changing preset options (make movie self contained is checked) it creates a file that opens in a FCP viewer, and another file that ends in .mov1 and .mov2.
    The files for video are linked to .mov files I converted with MPEG Streamclip. These files also have been modified in Color.
    If any other info is needed I'll provide it fast.
    Thanks in advance.

    What is the total running time of the project that you made in Final Cut Pro?
    If you are writing the export to a Windows FAT formatted drive, there is a file size limit.
    Files larger than the limit will be segmented.

  • Final Cut Pro - Export to Quicktime Movie...

    I am in a pickle. I have recently completed a project using Final cut pro 6.0 and wish to Export the project so I can create a DVD using DVD Studio Pro. I have also recently exported 3 sixty minute movies perfectly fine but for some reason this recent one wont.
    The Settings I am using are - DV PAL 48 kHz Anamorphic (as Im using a 16:9 format) It starts normally and says Writing Audio and Video, then Estimated Time: About 2 hours, this goes up to '9 hours estimated' then begins. After 1% being completed it 'Unexpectedly quits.'
    I can still export using Quicktime conversation and via compressor but want the quality and chapter markers. I cant figure out why is doing it especially seen as it was fine a few weeks ago.
    I have tried it again and now im coming up with a message saying "The application Final Cut Pro quit unexpectedly. The problem may have been caused by the KGCore plug-in." Firstly what is that and is it a possible solution?
    Please Help

    LATEST UPDATE.
    If i try and export one project it unexpectedly quits with the first problem, 0-1% done.
    If i try and export a different project it come up with the second problem 'KG Core plug-in'
    Both are from the same project just different sequences

Maybe you are looking for