Iphoto post processing speed

When I individually edit photos in iPhoto and add the noise reduction, after a few pictures it takes 15-30 seconds for the next photo to display. Therefore when I am working on a few hundred sports photos, it adds a lot of time to post processing. It is really only a problem when I use the noise reduction.
Any suggestions on how I can speed up the process. Thanks.

Just to add some detail, on my iMac 800 I printed two pages of 9-up and it took between 3-4 minutes to process and even longer to print. The printer would have to stop and process data after printing every line or two at most. The two pages took over 10 minutes to print on the printers normal plain paper setting. As a comparison I can print the same photos laid out the same way from InDesign in a minute or two.
I noticed this problem existed since the early versions of iPhoto. I just can't figure out why iPhoto causes my systems to choke so badly when printing.

Similar Messages

Workflow for Post Processing Magic Lantern RAW Video?

Dear Adobe Community,
I am interested in learning what steps/workflow fellow DSLR, Magic Lantern users take to Edit, Color Grade and add FX to their RAW video? Here is my untested thought process so far:
Adjust the Exposure, White Balance, Lens Distortion, Etc of DNGs in Adobe Camera Raw.
Import DNG image sequence into Premiere Pro for Editing
Use Dynamic Link to Color Grade in Speed Grade
Use Dynamic Link to add effects in After Effects
Render out in Premiere Pro
One of the concerns I have is that I've read on the Magic Lantern Forums that Premiere Pro will reduce 14 Bit DNG to 8 Bit. Is this something you've encountered? Is there a workaround?
I am fairly new to all of this and would greatly appreciate any feedback to point me in the right direction for Post Processing Magic Lantern Raw Video files. I have a subscription to Lynda.com as well if you have any suggestions for courses to look at.
Thank-you for your time.

Nothing Adobe makes can read MLV or RAW video files, so you have to use something else to convert them into CinemaDNG (a folder of images) or a high bit depth movie file (ProRes etc.) - there are many tools listed in the ML forum which can do that.
Premiere Pro can import cDNG footage but it struggles to play back in real time, and will not allow you to grade it using Camera Raw. To do that you have to use After Effects. The workflow is supposed to be "ingest in Prelude, edit in Premiere Pro, color in SpeedGrade", but quite frankly the learning curve for SG is massive. Adobe's attitude to CinemaDNG is strange; although the standard is open, support is only coded for very specific models of camera and the CC suite assumes a Hollywood workflow where professional colorists (who spend years learning how to use the software) operate offline from the rest of the edit, usually after all the cuts are made. It's not set up for a typical lone DSLR filmmaker, which is quite frankly why a lot of ML users prefer another well-known way to resolve the problem.
The 'fast and dirty' approach to getting a cinematic grade in Premiere would be to apply LUT files to the footage using the Lumetri effect (basically running SpeedGrade presets), or you can hand-grade it using the inbuilt Color Corrector tools - but that doesn't cover the other important stuff that ACR can do, such as lens correction, alignment, noise reduction, camera calibration profiles, etc. - for that, you should import the cDNG footage into After Effects (which does support ACR), correct and calibrate the frames, then export back to something high quality that Premiere can work with (such as DNxHD or ProRes 444). You won't notice any visual loss in quality, and Premiere then will play the timeline without struggling, but it takes a loooong time to chew through every clip.
As to if Adobe applications will ever support MLV files natively - well, since Adobe relies on close partnerships with camera manufacturers including Canon, you can guess what would happen if Adobe ever endorsed it. The only scenario I can imagine is if MLV is adopted in-camera by a major DC manufacturer (Alexa, etc) so vendors can support it without slapping Canon in the face. Flying pigs come to mind.

IDOC processing speed

Dear All
Anyone have any idea how we can improve IDOC processing speed
And what are the factor that have affect IDOC processing speed
Thanks & Regards
Amit Shivhare

Hi,
1. data which is posted thru idoc
finally goes thru some standard bapi,
which ultimately posts the data.
2. bapis are standard sap code,
which do a lot of vlaidations
before putting data into tables.
3. Hence, i don't think,
we can much upon their improvement !
what are the factor that have affect IDOC processing speed?
Re: Issue of grouping IDOC segments in huge loads
Idoc Segment limit ?
It is the standard program flow of transaction WE02 which checks the number of segments.if the count is more than 1000,it creates a another group and displays it for the sake of readability.
Anyway it does not affect the inbound processing of the IDOC.
<b>Reward points</b>
Regards

Direct linking from Premiere gets stuck at post processing

Hi Guys,
I have a huge project from Premiere. It's a feature about 1hr 32mins that i tried to direct link to speed grade. Speed grade loads up and it gets stuck at post processing. I read that people recommend exporting as an EDL but you only have 1 track of video? and I have like 9 tracks. What do you guys recommend doing?
heres the setup I have.
Macbook Pro Retina 15".
256gb SSD
16gb Ram
Adobe CC
Project sits on 2 thunderbolt drives.

i turned off the intel gpu and only ran on the 1gb card. still nothing. left it alone for 5 hours while it was in "post processing" and didn't load. im getting nervous, even if I got it to work and it crashes on me; I cant afford to wait on it.
I went ahead and exported my project to quicktime and currently working in Resolve 10 Lite. The scene detection was a lot faster than speedgrades. Im not here to knock on adobe/speed grade. hopefully you guys can fix this soon?
thanks
P-

Post Processing a bank line item - opening balance

Hi Experts,
I need some help with post processing of a bank statement item.
It is a greenfield implementation where no legacy transactional data or opening balances are migrated. Therefore I've posted a bank statement with incoming domestic bank transfer. This line item now requires post processing as it does not relate to any preceding transaction / document.
The journal entry looks like this...
161012 - AUD Bank No.1 Domestic bank transfers = Credit 5,000,000
161010 - AUD Bank Account No 1 = Debit 5,000,000
I guess "post processing" is required to clear the account 161012 and credit account 161010.
What is the best way to do that?
Thanks
Puru

Hi Puru,
Go to Liquidity Management > view bank statements > Filter with your new bank
You will observe that a bank statement with ID # 0 got created and the closing balance is same amount what you have migrated.
Now you select new bank statement the ID will be 1 and the last bank statement 0 closing balance will become the opening bank balance in bank statement # 1.
Migration of balances for bank accounts enables you to migrate the current balances of your bank accounts. During migration system automatically creates an offsetting entry so that the document balance results in zero ( this entry is only for migration posting only )
Your expectation of again posting manual journal is not incorrect and is not required here.
Your migration of bank opening balance amount is successful and you can use this bank account for your postings going forward.
Kindly mark this thread as answered if i answered your queries.
Thanks
Lokesh Sharma

Unable to find an Output Post Processor service to post-process request

Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1:          AR_ADJUSTMENTS                         COM_ADJ,
        AR_PAYMENT_SCHEDULES                   P,
        RA_CUST_TRX_LINE_GL_DIST               REC,
        RA_CUSTOMER_TRX                        A,
        HZ_CUST_ACCOUNTS                       B,
        RA_TERMS                               T,
        RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
        HZ_PARTIES                        PARTY,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        HZ_CUST_SITE_USES                      U_BILL
MSG-00500: DEBUG: Table 2:          RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
    HZ_CUST_ACCOUNTS                       B,
        HZ_PARTIES                        PARTY,
        HZ_CUST_SITE_USES                      U_BILL,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        AR_ADJUSTMENTS                         COM_ADJ,
        RA_CUSTOMER_TRX                        A,
        AR_PAYMENT_SCHEDULES                   P,
        RA_TERMS                               T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS   = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:            TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code:      78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       6
MSG-05000: DEBUG: Height Max:       6
MSG-05000: DEBUG: Remit To Formatted...   11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:       VAUGHN
MSG-05000: DEBUG: Last Name:        FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Ship To Formatted...   VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT   -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
Vasanth

Hussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth

One or more post-processing actions failed. Consult the OPP service log for details.

hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
pritesh

hi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT   -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan

One or more post-processing actions failed - XML Publisher report

Hi all, I'm working with the following envinronment:
Unix platform: HP-UX rp1 B.11.11 U 9000/800
DB: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
eBS: EBS 11.5.9
More in detail I have a problem when I run a request to see an XML Publisher Report. The request's status at the end is WARNING.....
When I click on "View Output" I don't see nothing and inside the "View Log" I have this error:
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1897375 on node RP1DEV at 10-SEP-2008 14:13:36.
Post-processing of request 1897375 failed at 10-SEP-2008 14:13:37 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Following the Metalink Note 364547.1 I opened the OPP service log and this is the content:
[9/10/08 2:51:09 PM] [OPPServiceThread0] Post-processing request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Executing post-processing actions for request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Starting XML Publisher post-processing action.
[9/10/08 2:51:09 PM] [72379:RT1897433]
Template code: XX_MANAGERS
Template app: AR
Language: en
Territory: GR
Output type: PDF
[9/10/08 2:51:09 PM] [UNEXPECTED] [72379:RT1897433] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:187)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:223)
at sun.io.Converters.newConverter(Converters.java:263)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/10/08 2:51:09 PM] [72379:RT1897433] Completed post-processing actions for request 1897433.
Anybody have any idea where the error is ?
Any help will be appreciated
Alex

You are right !!
The problem is inside the report generated by Oracle Reports
The XML code, which I retrieve running the report request is the following:
<?xml version="1.0" encoding="&Encoding"?>
- 
- <MODULE1>
- <LIST_G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1000</MANAGER_NO>
<MANAGER_NAME>Anil Passi</MANAGER_NAME>
</G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1001</MANAGER_NO>
<MANAGER_NAME>Martin</MANAGER_NAME>
</G_MANAGER_NO>
</LIST_G_MANAGER_NO>
</MODULE1>
and the problem is the "&" !!!
So, inside Oracle Reports, when I try to generate the XML code from a preexisting report, the encoding variable is not set.
Now, I'm trying to understand how to set it, but I didn't find nothing....
Somebody knows where can I find a Report's configuration file in order to set this "encoding" ?
Thanks
Alex

Post-processing of request failed

Hi
Getting following error when I submit XML Publisher PDF report.
------------- 1) PUBLISH -------------
Beginning post-processing of request 265191 on node EORAAPD10 at 14-APR-2006 20:51:43.
Post-processing of request 265191 failed at 14-APR-2006 20:51:45 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Post Processor Log file:
Log file has the following error
[UNEXPECTED] [50985:RT79177] java.sql.SQLException: Non
supported SQL92 token at position: 1:
We are on XML Publisher 5.5 and EBS 11.5.10 CU2.
Any help will be greatly appreciated.
Thanks

Suddenly I am getting this warning for a XML Publisher based Report.
Concurrent program Log
------------- 1) PUBLISH -------------
Beginning post-processing of request 610188 on node GCDSINGGN7HRO01 at 07-SEP-2010 10:39:47.
Post-processing of request 610188 failed at 07-SEP-2010 10:39:48 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Concurrent Manager Log (OutProcessor Log)
[9/6/10 6:29:36 PM] [OPPServiceThread1] Post-processing request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Executing post-processing actions for request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Starting XML Publisher post-processing action.
[9/6/10 6:29:36 PM] [32829:RT610012]
Template code: XXPLG_PMS_APPRAISAL_RATING_MGR_TEMP
Template app: XXPLG
Language: en
Territory: US
Output type: EXCEL
[9/6/10 6:29:37 PM] [32829:RT610012] Output file was found but is zero sized - Deleted
[9/6/10 6:29:37 PM] [UNEXPECTED] [32829:RT610012] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Others this type of report are working fine. Kindly helo on this

XML Publisher post-processing error 'java.io.FileNotFoundException'

Hi,
We are getting following XML Publisher post-processing error while running XML Publisher report.
It was working earlier but suddenly its erroring out.
[9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
[9/07/10 9:00:18 PM] [39177:RT559655]
Template code: XXHPOXPRRFLR
Template app: XXH
Language: en
Territory: 00
Output type: PDF
[9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
Please help me out to resolve this issue.
Thanks & Regards,
Sagarika

Hi,
java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
Thanks,
Hussein

How can I view my 6D raw files before I open them in post processing?

How can I view my 6D raw files after I load them on my computer & before I open them on a post processing Program?
I have no problem doing that with my 1DX,1DIV or 5Dmk III. This problem exist with any sdhc card I use on the 6D, but not on any other camera with the same cards.
Solved!
Go to Solution.

Your computer doesn't have camera RAW support installed for a 6D. RAW isn't really a standard-format... it's more of a concept. Every individual camera has it's own unique RAW format (even though they all have the same .CR2 extension).
Each time a new camera comes out, companies that make RAW processing software will make an update available that adds that camera. You'll need to get that update and install it.
Tim Campbell
5D II, 5D III, 60Da

Processing speed of my MacBook is extremely slow when opening applications, whether Mail, Safari or MSOffice

Problem description:
The processing speed of any function is extremely slow - such as opening Mail, Safari, clicking on a page within Safari, switching to MS Word, adding a window in Safari, loading a page from Safari. I get the spinning wheel most of the time before the action is completed. All other Macs which are newer in my home WiFi network operate just fine. I have done a top level (novice) check for malware, and haven’t found anything. Any help you can suggest would be truly appreciated! Thank you!
EtreCheck version: 2.1.8 (121)
Report generated March 25, 2015 4:45:43 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook (13-inch, Aluminum, Late 2008) (Technical Specifications)
    MacBook - model: MacBook5,1
    1 2 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM
        BANK 0/DIMM0
            1 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Replace Soon - Cycle count 675
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1280 x 800
        spdisplays_display_connector
System Software: ℹ️
    Mac OS X 10.6.8 (10K549) - Time since boot: 6 days 5:40:11
Disk Information: ℹ️
    TOSHIBA MK1653GSX disk0 : (149.05 GB)
        - (disk0s1) <not mounted> : 210 MB
        Macintosh HD A (disk0s2) / : 159.70 GB (39.03 GB free)
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    BUFFALO HD-PCFU3 931.51 GB
        - (disk1s1) <not mounted> : 210 MB
        Buffalo ExDrive (disk1s2) /Volumes/Buffalo ExDrive : 999.86 GB (805.75 GB free)
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.palm.ClassicNotSeizeDriver (3.2.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
        /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [not loaded]    org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.synology.CloudStation.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Dropbox    Application (/Applications/Dropbox.app)
    EvernoteHelper    UNKNOWN Hidden (missing value)
    Doodle iCal Connector    UNKNOWN (missing value)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    HP Scheduler    Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.6.6
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    nppanda3d: Version: Unknown [Click for support]
    Musicnotes: Version: 1.18.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Unity Web Player: Version: UnityPlayer version 2.6.1f3 [Click for support]
    DirectorShockwave: Version: 11.5.0r596 [Click for support]
    iPhotoPhotocast: Version: 7.0
Safari Extensions: ℹ️
    Evernote Web Clipper
Audio Plug-ins: ℹ️
    iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
         2%    WindowServer
         0%    Synology Cloud Station
         0%    fontd
         0%    Finder
         0%    Dropbox
Top Processes by Memory: ℹ️
    307 MB    WebProcess
    129 MB    Safari
    97 MB    mds
    69 MB    Dropbox
    56 MB    WindowServer
Virtual Memory Information: ℹ️
    102 MB    Free RAM
    1.06 GB    Active RAM
    450 MB    Inactive RAM
    262 MB    Wired RAM
    2.47 GB    Page-ins
    846 MB    Page-outs

Before you do anything do you have a current backup? If not make one.
I don't see any of the usual software suspects associated with slow downs. You don't need the Seagate software, you should uninstall that.
Reset the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and PRAM How to Reset NVRAM on your Mac - Apple Support
You only have 2GB of ram and could upgrade to 8GB, but Snow Leopard should run ok in 2GB.....not great but ok.
Start up in Safe Mode OS X: What is Safe Boot, Safe Mode? - Apple Support be paitient as it will take awhile to start as it checks and tries to repair any problems with the file system. Once it's completely started up you can restart normally.
Insert your Snow Leopard disc and restart while holding the C key. Run Disk Utility to repair the hard drive and permissions. While in Disk Utility check the SMART status of the hard drive, anything other than Verified indicates a problem with the hard drive.
Again, you only have 2GB of ram.....try restarting your Macbook every day.....it's been running for almost a week now.

OIM 11.1.1.5: Post Process Event Handler, change password notification

Hi,
Products
OIM 11.1.1.5 BP02
OAM 11.1.1.5
OID 11.1.1.5
Problem
I have written a post-process event handler which fires when a role is assigned to a user. The event handler calls a plugin which uses the UserManager API to generate and change the user's password.
I've tested this by assigning a role to the user via the OIM web console. I can see my log messages indicating that the event handler has fired and that the password has been changed.
However, I expected that when UserManager.changePassword completed, a notification email would then be sent to the user informing them of the new password, but no notification email has been sent.
The email notifications have been set up correctly, because I have changed the same user's password via the OIM web console and successfully received a Reset Password email.
So, my questions are:
1) Am I right in thinking that when you call UserManager.changePassword(), an out-of-the-box ResetPassword email notification should be sent to the user?
2) Has anyone got this working in 11.1.1.5?
Some more detailed info
In my plugin class I'm calling the following from both execute methods (EventResult and BulkEventResult):
char newpasswd[] = new RandomPasswordGeneratorImpl().generatePassword(user);
getUserManager().changePassword(userKey, newpasswd, false, null, true);
logger.info(("Successfully changed password"));
plugin.xml
     <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
     <plugin
     pluginclass="oracle.iam.PostInsertPlugin"
     version="1.0"
     name="PostInsertPlugin">
     </plugin>
     </plugins>
     </oimplugins>
$OIM_HOME/server/bin/weblogic.properties
          wls_servername = oim_server1
          app = OIMMetadata
          metadata_from_loc=/home/oracle/eventhandlers
          metadata_file=/metadata/roleuser/custom/EventHandlers.xml
/home/oracle/eventhandlers/import/metadata/roleuser/custom/EventHandlers.xml
<?xml version='1.0' encoding='utf-8'?>
<eventhandlers
xmlns="http://www.oracle.com/schema/oim/platform/kernel"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler
class="oracle.iam.PostInsertPlugin"
entity-type="RoleUser"
operation="CREATE"
name="PostInsertPlugin"
stage="postprocess"
order="1002"
sync="TRUE"/>
</eventhandlers>
There are no errors in the OIM out and diagnostic logs apart from the following which occur at OIM startup:
[2013-01-07T16:29:23.425+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-OIMMigration/EventHandlers.xml and it will not be loaded by kernel.
[2013-01-07T16:29:24.267+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-callbacks/event_configuration/EventHandlers.xml and it will not be loaded by kernel.
Thanks
dty
Edited by: oim_user on Jan 7, 2013 5:37 PM

No notification will be sent if you changepassword using the method from usermanager api.
You have to trigger the resetpassword event manullay in your code.
Here is a sample code to create an event for reset password. Once you create event, invoke it from notification service - notify method.
NotificationEvent event = new NotificationEvent();
String[] receiverUserIds= {userLogin};
event.setUserIds(receiverUserIds);
event.setTemplateName("ResetPasswordNotification");
event.setSender(null);
HashMap<String, Object> resolvedData = new HashMap<String, Object>();
resolvedData.put("userLoginId", userLogin);
event.setParams(resolvedData);

Video post processing/quality control no longer works in flash player

I use to watch videos via http://www.channel5.com and was able to use the post processing features in the AMD driver to improve the picture quality.
Now, it no longer works. Is this because hardware acceleration isn't working?
For a while I was able to use it in Internet Explorer, Sometimes in Firefox but never in Chrome. Now even with internet explorer it doesn't seem to work correctly.
I am using the latest flash versions for all platforms and the latest browser and driver version from AMD too.
Has Adobe changed something with the latest version of flash which cause a problem with the AMD Driver? Why is there no longer a Hardware Acceleration check-box in Internet Explorer?
I am using Windows 8.1 and I have the setting in the AMD CCC "apply current vdieo quality settings to internet video" checked. I have made sure in Firefox and Chrome hardware acceleration is enabled both in flash player settings and in the browser settings.
Thanks for any pointers you can give.

It may be for you, but it isn't for me in Internet Explorer, by comparison though, there is the box available in Chrome and Firefox...although in Chrome it doesn't do anything.
I did some more testing; With Internet Explorer hardware acceleration seems to be dependant on the website you watch.
For example, using IE to visit http://www.dailymotion.com the post processing options work fine, but when on http://www.channel5.com they do not. Is there any reason why this is?
As for other browsers, it seems hardware acceleration just isn't working at all since post processing never works on chrome.
On Firefox it seems to behave the same way as IE, e.g it works on some sites but not others.
I thought I may be able to get around this by disabling the pepper flash player in chrome, but it doesn't seem to make any difference, either its still using the built-in one or it still doesn't work at all with hardware acceleration.
Either way none of these achieve what I was able too before, get hardware acceleration working with http://www.channel5.com .

Post Processing records in BAPI_PRODORDCONF_CREATE_TT

Hi All,
I am using BAPI_PRODORDCONF_CREATE_TT for Production Confirmation with Auto Goods receipt(GR) Feature.
But, in case any error in goods movement occurs system creates a post processing record( Visible in transaction COGI).
We don't want entires in COGI.In case, any error occurs system should terminate the session. The same control is maintain in SPRO. But, BAPI overrules that.
Kindly let me know which settings to be used in BAPI, to avoid COGI.
In Post Wrong entries field of BAPI , I have used ' " ( Blank) value.
Please suggest.

Hi Stuti,
What I suggest you is to use 2 BAPI's instead of 1.
First use BAPI_GOODSMVT_CREATE to carry out goods movements.
If this BAPI is successful then only execute the BAPI you are using only to carrying out the confirmations
This is the best way to control your confirmation for failed goods movements.
Regards,
Yogesh

Iphoto post processing speed

Similar Messages

Maybe you are looking for