IPhoto Printing - sizing problems

After many hours of frustration I am about to give up on iPhoto 7.1 printing. The Print Settings dialog does not match the choices of settings or paper sizes of my printer. I enter a custom size [tedious to have to do when it is a standard photo paper size such as "L"], enter, then when I add a border the paper size reverts to A4. If I don't add a border or otherwise customize the picture, then go to "print" on checking the advanced print options the paper size does not match that set in the "Print Settings" dialog. Even if the preview looks right the print size does not match. I called into my local Apple store and tried this at the Genius Bar - they found the same issue on their Mac and after an hour of head scratching they could not figure it out. Any thoughts? This should be dead easy - I am back to adding borders in PS and printing from Aperture; not what I want to do for snapshots.

Daniel:
Welcome to the Apple Discussions. Can you provide a little more info regarding the paper sizes available, printer type, etc. Not familiar with paper size "\L\". What language is you Mac set up for? What sizes are you trying to print? Are you cropping the images to the paper size selected beforehand?
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

Printer selection problems iPhoto 6

Since upgrading to iPhoto 6, I have to change my default printer in the printer setup utility in order to print to the printer I want. Before the upgrade I simply selected the printer I wanted to print on in the print menu (just like in any other application!) and no problem. Now when I want to print on my Epson R300 instead of my HP3330, which is my normal default printer, I have to make the Epson the default and then switch it back when I'm done printing. If I don't do this iPhoto prints to the HP3330 even thogh I've selected the Epson in the print dialogue. This is new problem and is unique to iPhoto as all my other applications print as they should once I select the desired printer. Anybody know why this is happening or how to fix it?
Thanks in advance

I have the same problem w/ iphoto 06! I suddenly cannot print my photos to my HP photosmart unless I change it to my default printer... even if I have selected photosmart in the drop down menu... the image is still sent to my other hp printer?

Non standard format images from the iPhoto print service

Can anyone tell me how to get the iPhoto print service to leave my images alone? They default to filling their 10 x 8 or 7 x 5 paper sizes. Nowhere on the order form do they tell you they're going to do this and I can't find anywhere to tell them not to.
They also supplied the prints in neat card wallets with "Do not bend" in nice red boxes printed on them. These were then dispatched in a plain white envelope with no such notices on it. Not surprisingly the prints arrived bent!

Welcome to the Apple Discussions. When you click on the Buy button the available print sizes that Apple provides are displayed and you have to fill in how many of each you want. There is no custom size available, at least here in the states. What size(s) did you select in the order window?
Click to view full size
Didn't you get a similar window over there?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

IPhoto printing on Canon MP640

I'm having problems printing from iPhoto using WiFi. The printed photo in no way resembles the preview: sometimes the prints are cropped, sometimes borders appear on three sides etc. However, when I use the USB connection, the prints are fine. I'm using what I think are the latest drivers (CUPS 10.30.3.0) - any suggestions why the WiFi connection should behave differently and what I can do about it? I'd prefer not to reinstall the drivers, as it took several hours last time and I still don't know what I did to get it right!

The v10.30.3.0 driver is certainly the latest. Check that both the USB and the WiFi print queue are using the same driver version.
What you will notice is that all the selections made in the iPhoto print dialog don't stick when you then get to the next print dialog window. But you should still see a preview of the image at this print dialog and it should still look complete. If you don't see the image, ensure you click the triangle next to the printer name to see the print options.

Print Quality problems

My print quality for Reds & Greens is coming out streaked. The blacks and blues are fine. I use HP ink cartridges anad keep them cleaned and aligned. But on the Alignment page the reds & greens are streaked and cannot be cognized. Could this be a print head problem ?

Hello novemberwolf,
Welcome to the HP Forums.
I see that you are having some printing issues when attempting to print in colour.
Please click on the following link on Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Print Cartridge Problem: Tricolor - HP Officejet J4680 All In One

I am seriously going to have an anxiety attack. I run a business from home & I HAVE to have a printer. I just spent $50 on new ink cartridges. My printer was working fine for the last week, and then tonight I have this error message:
Print cartridge problem: [Tri Color] . Refer to device documentation to troubleshoot
SO I reset the printer, shut it on and off, cleaned the cartridge and the printer, switched out the new cartridge with the old one ~ same problem. Over and over.
I called HP and they said that since my printer is out of warranty they can't help me unless I purchase a new warranty plan. What horrible customer service. This printer is a product of HP and I should be able to get help regardless of when the warranty expired.
This is so frustrating. If I can't get help, I think I would rather buy a new printer of a different brand instead of paying for a warranty after I just spent 50 bucks on ink. GRRR!

The page here has troubleshooting steps that may resolve your issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows 8/8.1: Printer Offline Problems

Windows 8/8.1: Printer Offline Problems
Are you getting an error that your network or wireless printer is offline when you try to print?
When you print to your network printer, does it fail, and when you check the printer status it says Offline?
Do you have problems printing to your wireless printer after your PC has been asleep?
If you answered YES to any of the above questions, then you have a problem with your network printer being offline. After some investigation into this problem, we recommend updating windows. Run Windows update to check that your version of Windows 8 is up to date.
There are a few windows updates that may help with this problem
1) Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
2) Install this Microsoft patch for the WSD service. http://support.microsoft.com/kb/3000461
If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
Assign the printer a static IP address
An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
Get the printer IP address.
Press the Wireless button on the printer control panel to view the network settings.
Access the Network menu on the printer control panel.
Print a Network Configuration Page or Wireless Test Report page.
Once you have the printer's IP address, open a new web browser window or tab.
Type the IP address in your web browser's address bar, and then press Enter.
Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
note:
Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
In the EWS, click the Network tab.
In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
After the manual IP address populates, click Manual DNS Server.
note:
Keep a record of the manual IP address for reference.
On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
Method one: Use publicly available DNS server addresses
Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Method two: Get the network DNS information via your computer
Select your operating system, and then use the following directions to obtain the DNS server addresses.
Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
Scroll to and locate the DNS Server addresses.
In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Print a test page to make sure that the printer's IP address is the same as you assigned.
Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
Adding a Wireless Network Printer using Control Panel
Go to Control Panel and choose Devices and Printers
Click on Add Printer
The PC will search the local network and display the network printers.
Choose the printer and select Next
The system will then try and auto select a compatible driver
Select the current driver and Click Next
The system will then ask for a name for the printer. The user can change the name and then click Next
The User can then choose to share the printer
The user can select to make this new printer the default and then click Finish.
The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
Choose the Advanced Tab
Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
The user should try this configuration and see if they still experience problems.
Please Note:
DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
JonW
I work for HP

I have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
Your solution does not help me because I have tried to install Win8.1 and it failed.
I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
Is there another solution?
Or is there a way I can save the print queue?
Mike

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Officejet Pro L7590 Print Quality Problems - Black/Yellow Printhead

Officejt Pro L7590 All-In-One
Running on Windows 7 64 bit, USB connected to computer
Approx 2.5 yrs old; has printed 30,000 pages.
Issue: Black/Yellow printhead replaced about 500-1000 pages ago; new unit only tested as "Fair" in diagnostics, even though it was fresh outta the box. Print Quality good.
About two weeks ago, printer refused to print, flashing ambler "!", etc., error message regarding black/yellow printhead.
Ordered replacement ($71 again -- ouch! Whole printer only cost $199 30 months ago).Again, new unit only "fair" in diagnostic (original Cyan/Magenta printhead still reads as "good").
New printhead required much cleaning and aligning, and now prints with large gaps on a regular basis down the page. Talked to tech guy @ Staples where i bought it; his only "helpful" suggestion was that most people just toss the printers the first time the printheads go bad.
Print heads are separately warranted.
My questions:
(1) What else is there that's screwing up my print quality,a nd is it fixable?
(2) Can i get my $ back on the two printheads that didn't fix the printer's problems?

I've included a link below to help you troubleshoot rpint quality issues...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
This document provides some system settings that may help fix the issue.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD

Help! I have an iMac 24" OSX version 10.6.8 my iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is iphoto'11 version 9.2.3(629.52) What should I do to make it work properly?

Help! I have an iMac 24" OSX version 10.6.8. My iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is: iphoto'11 version 9.2.3(629.52). What do I need to do to remedy this? I recently installed InstallMac. I don't want this on my computer. I don't know how to get it off. I'm afraid that is what scrogged my iphoto. Can anyone tell me how to correct this situation?

Re: iPhoto:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

Printing quality problem with Photosmart D110

The printing quality is very bad after we changed the catridge. The printer keeps saying that there is catridge jam. But after I followed the steps by the printer, the problem is still unsolved. What is the possible reason and how could I solve it?

Hello RussellYang.
Welcome to the HP Forums! I understand your concerns with your Photosmart D110A. Does this issue occur from multiple program(s) or just one program?
Please follow this entire HP document on Continuous Pages of Strange or Garbled Characters Print in Windows.
What is your operating system on your computer? Click here to find out: Windows.
Have you tried using a different USB cord, to verify if the issue still occurs?
Please inform me your troubleshooting steps.
I worked on behalf of HP.

IPhoto Buy Book Problem

I am planning to purchase a book through iPhoto. The problem is I cannot edit the shipping information it doens't show the country I'm living in. By the way I am living in Malaysia. Would appreciate if somebody could help me, how to change the shipping information. Thanks.

This service is not available in Malaysia.
Regards
TD

IPhoto Printing - sizing problems

Similar Messages

Maybe you are looking for