IPhoto shows blank squares or the same thumbnail for each photo.

I am on iPhoto 11, 9.2.1 and work on Macbook Pro OS X 10.6.8. My iPhoto has had a complete melt down. When you open it, it either shows blank squares where the photos are or it picks the last photo you look at at displays this for every single photo. If you click to enlarge the photo it will display the correct photo. When I close it everytime it shows that it is updating the library. I have tried shutting down my Mac hoping that it would reset itself. I have checked that it is up t date.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Similar Messages

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

Why do i need to buy the same app for each device over and over again??

why do i need to buy the same app for each device over and over again??
and why cant i just pay for the app ones for all devices as long at it is with the same account??
i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Change field value in a table, based on another field value in the same row (for each added row)

Please Help, I want to change field value in a table, based on another field value in the same row (for each added row)
I am using this code :
<HTML>
<HEAD>
<SCRIPT>
function addRow(tableID) {
var table = document.getElementById(tableID);
var rowCount = table.rows.length;
var row = table.insertRow(rowCount);
var colCount = table.rows[0].cells.length;
for(var i=0; i<colCount; i++ ) {
var newcell = row.insertCell(i);
newcell.innerHTML = table.rows[1].cells[i].innerHTML;
switch(newcell.childNodes[0].type) {
case "text":
newcell.childNodes[0].value = "";
break;
case "checkbox":
newcell.childNodes[0].checked = false;
break;
case "select-one":
newcell.childNodes[0].selectedIndex = 0;
break;}}}
function deleteRow(tableID) {
try {var table = document.getElementById(tableID);
var rowCount = table.rows.length;
for(var i=0; i<rowCount; i++) {
var row = table.rows[i];
var chkbox = row.cells[0].childNodes[0];
if(null != chkbox && true == chkbox.checked) {
if(rowCount <= 2) {
alert("Cannot delete all the rows.");
break;}
table.deleteRow(i);
rowCount--;
i--;}}}catch(e) {alert(e);}}
</SCRIPT>
</HEAD>
<BODY>
<INPUT type="button" value="Add Row" onClick="addRow('dataTable')" />
<INPUT type="button" value="Delete Row" onClick="deleteRow('dataTable')" />
<TABLE id="dataTable" width="350px" border="1">
<TR>
<TD width="32"></TD>
<TD width="119" align="center"><strong>Activity</strong></TD>
<TD width="177" align="center"><strong>Cost</strong></TD>
</TR>
<TR>
<TD><INPUT type="checkbox" name="chk"/></TD>
<TD>
<select name="s1" id="s1">
<option value="1">1</option>
<option value="2">2</option>
<option value="3">3</option>
</select>
</TD>
<TD><input type="text" name="txt1" id="txt1"></TD>
</TR>
</TABLE>
</BODY>
</HTML>

Hi,
Let me make sure u r working with table control.
First u have to create a event(VALIDATE) to do the validation.
Inside the event,
1. First get the current index where user has pointed the curson
2. Once u get the index read the internal table with index value.
3. Now u can compare the col1 and col2 values and populate the error message.
1. DATA : lo_elt TYPE REF TO if_wd_context_element,
l_index type i.
lo_elt = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
CALL METHOD LO_ELT->GET_INDEX( RECEIVING MY_INDEX = l_index.
above code should be written inside the event.
Thanks,

Calls listing, why repetition of the same contact for each call ?

Calls listing, why repetition of the same contact for each call ?

jasonnPOS,
you seam to have had the exat same problem I am having now. Have you solved it?
The link you send in your post :
http://support.apple.com/kb/TS2326
As I think you already noticed doesn't solve the problem it merly duplicates the numbers in each contact. One with +and country code and one without that...
There has to be another solution...

IPhoto keeps trying to import the same 42 files each time

I imported thousands of pictures from a formerly Windows based backup external hard drive. Everything went well except with 42 pictures. Every time I bring up iPhoto, it tells me that these 42 pictures were not imported and then it ask me if I wish to import them. I click yes and it attempts and then says it was unable to import them and has now placed in them a recovered folder in the pictures folder under finder. That would be okay except that it does it every time. I just removed 14 folders of the same files. If I click No it creates a recovered folder within the iPhoto album section, How do I stop this from happening? I just got off the phone with Apple Care and they were no help. All he told me to do was rebuild iPhoto database. We are talking about 15,000 pictures here that have been put in specific folders and certain albums. I do not want to go through that process again. Oh, I am doing this on a new iMac I just purchased. Any suggestions?

this is one of the very few times when the answer is to delete something form your iPhoto library
Quit iPhoto and right click (control click) on the iPhoto library and choose the show package contents option - look in the iPhoto library for a folder named import (or importing) and drag it to the desktop - do not move or change anything else - launch iPhoto and everything will be ok
Open the import(ing) folder on your desktop and if there are any photos you want import them into iPhoto - and then drag the import(ing) folder to the trash and empty it
LN

Can any one help. I have put music on my phone and its showing lots of the same covers for each song on the album, how do i make it into one album?

Hi Can anyone help? I have put music on my i-phone but its showing lots of the same album cover for each individual song, how can I create one cover for the album?

Do you have Sidebar ON?
iTunes > View > Show Sidebar.
Connect and select iPhone in iTunes Sidebar under DEVICES, choose the Music tab on the right, select Sync Music and whatever music you the on iPhone. Click Apply (bottom right)

Re-writing the same queries for each universe?

Hello
For our Xcelsius dashboards, we have 6 customers with the same universe stucture. Our dashboard uses 15 queries (QaaWs).
Now, for each customer, I have had to duplicate each query then change the universe. This is a pain and I feel there must be a better way. If I need to change a query for example, I have to change 6, one per customer, even though I am only changing the universe.
Is there any way around this?
Thanks
Eddie

Eddie,
What I feel is that you need to link all these universes into one single universe and build those 15 queries.
Thanks,
Karthik

I just purchased an ipad, and now my husband is seriously thinking of purchasing one also. When we buy a book do we have to make 2 purchases of the same book for each ipad? Or does Apple have the same arrangement as the Amazon kindle.

I have just purchased an Ipad, and now my husband is seriously thinking of also acquiring one. When we purchase books must we buy 2 of each title, or does Apple have a similar arrangement as the Amazon kindle?

If you use the one iTunes account between the two of you then you can both download the ibook onto your iPads - I have some of my ibooks on both my iPad and iPhone. If you decide to have separate iTunes accounts then if you use the same computer's iTunes to sync to (with both accounts authorised on it) then you should be able to sync the book to iBooks on both devices.
If you have separate accounts and sync to separate computers then you can copy the ibooks between the computers via, for example, a flash-drive and add it to the second computer's iTunes (File > Add To Library). There is a risk that if you sign into the second iPad (or computer) with a different iTunes account and re-download one of its past purchases that the iPad (or comptuer) will become tied to that account for 90 days, so copying it over manually would be better than re-downloading : http://support.apple.com/kb/HT4627

My thumbnails have all disappeared. If I view events there is the same one for all 270 events and if I open an event I have clack thumbnails. I can only see the photo if I open it individually.

If I view events there is the same thumbnail for all 270 events and if I open an event I have black thumbnails. I can only see the photo if I open it individually.The only way I can then see the thumbnail is by editing each photo. Then to even further complicate matters the last editted phot is replaces as the thumbnail on all events foders!...grrr. This is what I awoke to two mornings ago after inly backing up my machine which I do every night.

No. Quitefrankly I didn't know I could even use iPhoto on iPad, I just have the photos app that came on it. This is on my laptop. I don't particularly like iPhoto I use it essentially to take photos off my camera and store all the originals. I use Photoshop. To work on them and store them in Dropbox (don't get me started on iCloud!). As I said this is a problem that seemed to crop up overnight after backing up to my external HD.

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

How can I add the same transition to 200 photos?

I'm making a slide show of over 200 photographs. How can I add the same transition between each photo without inserting it 200 times? There has to be a way to globally' insert transitions. What if I want to modify the length of the transitions or the photos? I don't want to modify each one individually.

Daniel,
Here are some references for you for applying a transition between all photos
1)
http://www.adobeforums.com/webx/.59b4ddb1/0
will point you to a tutorial at muvipix.com
Basically you do a Create Slideshow command choosing the transition before the photos are placed on the Premiere Elements Timeline. This process also specifies the duration for the "slide" and the transition.
2)I suggest that you also read this FAQ about the resolution of photo files to be used in Premiere Elements. Even though written for an earlier version, it is still relevant (and potentially necessary) depending on the specs and status of your system
http://www.adobeforums.com/webx/.3bb8822c

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

I have 2 ipad2s on one account. can i share the apps purchased rather than having to purchase same app for each. I am only user.

I have 2 ipad2s on one apple/itunes account. can i share the apps purchased rather than purchase the same apps for each ipad2
. i am only user.

.... And you can put them on as many iDevices as you own. There is no limit as long as you use the same Apple ID and iTunes account for all of the devices.

Suddenly my Nikon Coolpix will not upload onto my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please.

Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
You could also try reformat the Card with your camera
Regards
TD

IPhoto shows blank squares or the same thumbnail for each photo.

Similar Messages

Maybe you are looking for