IPhoto Slideshow dooes not import into FCP HD

Hi!
I used iPhoto's export feature to create this mov file of my slideshow. The movie file came up to about 1.6GB (approximately 350 photos). The dimensions are 720x540. However i keep getting an error message when trying to import the file into FCP. I had to other smaller clips- of the same dimensions but had no problems importing them in. Does anybody have an idea why does is happening and what can I do to make it work?
Thank you.

I figured it out. < </div>
Okie dokie but you owe it to the rest of us to explain what you figured out on your own.
bogiesan

Similar Messages

Iphone 5 videos from iPhoto will not import into FCP

Just bought FCP X and tried to import movies from iPhoto taken with my iPhone 5 and get a message that the file format is not supported. Any suggestions?

To late. The videos were downloaded into iPhoto and removed from the iPhone. I actually exported the videos to my desktop then imported them into FCPX without any problem. It would seem to me that I should be able to import directly. The video format (in iPhoto) is supported according to the apple web sight. Any thoughts?

Color XML Data Not Importing Into FCP

When I finish rendering my clips in color and I send them to FCP, FCP says importing XML data and the progress bar stays at 50% and doesn't move. Anybody have any clue on what to do??

You will have to troubleshoot the round trip for something illegal that you exported from the FCP timeline. A hung return XML indicates that it has corrupted because of an ambiguous instruction that COLOR hasn't been able to understand -- it may not even have anything to do with the media and how its constructed on the timeline.
Unfortunately, the number of things that this could be is a somewhat lengthy list. You didn't encounter any obstacles with strange things happening on the COLOR timeline, apparently. Without the actual FCP timeline and what kinds of things are stacked on it -- impossible to say.
But here's an example of a known behavior: A graphic still (like a Jpg) with a filter or effect applied to it will cause the rest of the media on the remaining timeline to be lost. It just won't come back on the FCP timeline, as opposed to hanging the import. Stuff like that, that doesn't usually get discussed under the "just hit the easy button" workflow.
jPo

IMoive Quicktime not importing to FCP

Hello,
I have a quicktime that was created in iMovie that will not import into FCP. Any recomendations on exporting this differently or what exact format FCP will recognize the quicktimes as when they were created in iMoive?
Sara

When I open the quicktime, I "export.." and I only have 10 options or so. Highest quality DV isnt one of them.
Which one do you think is right? I already tried Q Movie.
Movie to:
3G
Apple TV
AVI
DV Stream
FLC
Hinted Movie
Image Sequence
iPhone
iPod
MPEG-4
Picture
Quick Time Media Link
Quick Time Movie
AIFF
AU
WAVE

LiveType .ipr won't import into FCP - File type not recognized

LiveType file is greyed out when trying to import into FCP as a Standard File type. If we change Standard File to All Files we get an error stating, "File Error: 1 file recognized, 0 access denied, 1 unknown."
The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager.
We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.
Is it time for a reinstall of FCP Suite?
G4 Tower 1.42 Ghz Mac OS X (10.4.7)
G4 PowerBook 667 Mac OS X (10.3.7)
G4 PowerBook 1.67 Mac OS X (10.4.7)
G5 2.5Ghz Mac OS X (10.4.7)
iMac G5 1.8Ghz Mac OS X (10.4.7)

The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager. We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.< </div>
This is usually two things: In compatible versions of FCP or a missing element that allows the .ipr files to be imported. I have forgotten what the enabler is but it's obviously working on your G5 or you wouldn't be asking the question. If you create a LT file on your G4, can you import it into FCP on the G$?
(You can search the forum for similar problems, it comes up about twice a month.)
That leaves the problem of incompatible copies of FCP. You have not provided that information. FCP is not backwards compatible.
bogiesan

.CR2 will not import into iphoto 08 7.1.5

I have a few hundred photos taken by a friend that i am trying to import into my iphoto library.
Getting an unrecognizable file message.
I shoot on a Canon XSi in RAW and have no issues importing to iphoto, Apature or photoshop....
her images were shot on a Canon TSi in RAW and will not import into any of my programs.

The fact that you can use the Raws from your XSi is of no relevance.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Changing the Raw specification is one of the ways of upgrading the cameras.
IPhoto and Aperture support - or don't - the same cameras.
Regards
TD

After effects animation Codec won't import into FCP

Hi
I have used After Effects to do a green screen key on some HD 1080i footage.
I then went to export - quicktime movie - animation
I understand that the animation codec is the only way to export with an alpha channel so that I can put other footage in after my nice green screen key.
I set quality to best and frame rate to 25, I also tried frame rate as current and it exports and plays back fine in quicktime movie player, but won't import into final Cut.
The error message is "wrong frame rate"
Does anyone have any suggestions? I am quite new to after effects and wonder if there is something wrong with the way it is seeing the footage as I shot in widescreen and the image is squeezed as for a 4:3 TV aspect ratio.
Thanks.
Ajay

1. Check your AE composition settings (cmd-k) and be sure your frame rate is set to 25... AE uses the frane rate of your composition and not the settings in your export module...
2. Do not use the "export" command in AE... that is used only for special purposes only (i.e. for using "quicktime exporto compnents" not available under the export queue)...
3. use the "make movie" or "add to export queue" command instead
4. You expot module should be set as:
- best settings
- animation + alpha
do not specify any frame rate in the export module!! AE automatically uses the frame rate in your composition settings!!
5. Export and import into fcp...
I never had problems with AE animation+alpha and fcp 6.0.1

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

H.264 will not import into DVDSP?

So I have been searching several discussion forums and the question I have seems to pop up in each of them, but is never answered???
Simply put, I have a FCP 6 project sequence that is 720p24frame which is an editing timebase of 59.94 with an aspect ratio of 960by720.
This is an 8.5 minute piece so I know that it will fit onto a regular DVD-R.
So I go through compressor and compress it into both an MPEG2 and H.264 - each at an HD bit rate.
Then I set up an HD project in DVDSP and try to import the two. The MPEG goes in fine and burns with no problems. My BlueRay/HDDVD combo player is on its way in the mail so I can't test it, but it will not play in my SD DVD player. Then I try to import the H.264 - It states something to the effect of not a compatible format....
That is my question - Why will the H.264 not import into an HDDVD project in DVDSP - all of the settings are correct from the initial edit - through compressor - through DVDSP.
Thank you for anyone who can help - we have a large festival coming up that has the option of 35mm or HDDVDs (we cannot afford a print).

So...this issue is somewhat solved.
I have done several exports using the provided H.264 presets then tweaking them each to my own set specifics. There are four places in the formats sections of compressor that have H.264 as a codec - one of these is for iPod and web so I disregarded that one completely.
I always applied the same settings as to have a control base when doing this experiement - I haven't done a science project in probably 15 years. I also pushed the bit-rates to the highest level.
After many hours in and out of compressor and DVDSP, I found only one of of the presets loaded properly into DVDSP - the 60min under HDDVD H.264 preset (altered to my higher bit-rate)
I am still waiting on my player to try it out, but it did burn fine. This is all so strange since all of my own settings (bit-rate) and other data was constant.
Oh well...at least I've got one test completely burnt.

Creating animations that will import into FCP

What are some program options for creating and manipulating objects like squares, rectangles and circles that will be used for creating animations to be imported into protions of FCP projects. The final output will be DVD's. Director MX2004 works very well for creating the animations, however when converted to a QT movie and imported into FCP, the animations look like a copy of a VHS tape. (Export settings were component video.) The animations are not acceptable when viewed on both a TV and NTSC monitor. Is anyone successfully using Director for such an application? I would certainally appreciate any suggestions.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

I agree about the material that is coming out of Director being the problem.
The fundamental questions is "is Director capable of this kind of output?"?? I was hoping someone would tell me "this is how I did it" or "It is impossible using Director". All I know is there was some animation from Director in at least top movie a couple of years--I don't remember its name. So someone was able to get animation out of Director good enough for the film industry!
As for other questions you posed. The vector graphics I need can be created and manipulated as I need in Director. The whole project could be done in Director and outputed as a cross platform "projector" from a Mac or PC version of Director. However, there some issues with keeping things "in time" using Director. Using Director for the whole project is "plan B".
With regards to your other questions. In short, I want to animate some very detaliled shop type activities that are hard to video and understand. The animations will compliment the video and will show/simplify concepts needed to learn particular shop skills.
I want to make and market a series of DVD on these shop activites. Yes I know it is not a small project. I have been working on problems relating to everything from copyrighting to the insurance/liability aspects for several years. I also have the hardware & software to make DVD "demos" and examples to "show and tell". Now I need some help getting the stuff to do what I want/need!
FCP is the best option for "putting together" audio, video and amimation before making a DVD.
Thank you for your input.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

My iphoto events were not transformed into albums in Photo. Is there a way I can retrieve them?

My iphoto "events" were not transformed into albums in the new Photos for Yosemite, and therefore I am back with my bulk pics, not filed. Is there a way I can retrieve the classification I had made, please?

Whenever you connect iPhone in iTunes, it syncs and a backup is created. Check backup folder if you have that time-stamped file saved.

My title and description info on my iPhoto images do not import to Aperture with the image

My title and description info on my iPhoto images do not import to Aperture 3.2 with the image. Is this just the default setting and if so, is there a way to import all the info?

Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I have already assigned photos from iPhoto to folders in Pictures on the Mac using the instructions from Adobe. How do i now move more recent photos from iPhoto without duplication and import into Lightroom?

I have already assigned photos from iPhoto to folders in Pictures on the Mac using the instructions from Adobe. How do i now move more recent photos from iPhoto without duplication and import into Lightroom?

If the images are in the location you want them be sure to select "Add" at the top of the import dialog box.

Motion project imported into FCP looks different...

I have a Motion project that moves 17 magazine covers across a background. When I preview it in Motion it looks great, but when I import it into FCP the mags overlap and run into each other. What could be happening during import and is there a fix??

I'm posting in response to my own question because this may actually be a bug. When I import the Motion project into FCP with the Motion layers locked, the animation is altered. When I go back into Motion and unlock all the layers and import into FCP, the animation is perfect. No kidding, locked tracks and the animation is funky, unlocked and it's fine. Anyone ever stumble on this??

IPhoto Slideshow dooes not import into FCP HD

Similar Messages

Maybe you are looking for