IPhoto Slideshow images will not burn to DVD -- Green Screen

I'm trying to burn a slideshow I created in iPhoto '09 to a DVD using iDVD '09. The first few time I've done this, everything burns properly, including the DVD menu. When I select the "play" button to play the slideshow, the music that I originally entered plays correctly; however, the screen is completely green and none of the images appear.
Slideshow has 136 pictures and three songs from my iTunes library. The menu in iDVD has no music and only one pictures, using a previously loaded theme from the default options. I am burning the slideshow to 16:9 ratio, NTSC, best performance.
I have tried creating using the autoplay upon dvd insert option, which still did not work. Same green screen with slideshow music playing. I am currently trying to export the slideshow as quicktime movie then adding that to the project.
PLEASE help. Any ideas appreciated.

I did search apple's KB again but that's the only article I could find on Green Screen so I posted it to the forum for reference purposes only....
Sorry it failed to help. I'll ask around for other suggestions and if anything comes up I'll post back.
DRM is certainly a possibility as suggested above even though I've not seen it attached/related to an issue of this nature (lines yes, but rarely the entire screen).
Message was edited by: SDMacuser

Similar Messages

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

IDVD will not burn a DVD - just disk image - why not?

I did a short iMovie project (just about 6 or 7 minutes of video); used a theme, added background music from my iTunes collection-- OK all fine; exported via "Share" to iDVD (all this is iLife'09 and Leopard 10.5.6 on a MacBook May 2006).
I did a DISK IMAGE but then also wanted to test to burn a real DVD. That got to to final step then hung- said one minute to go, then ejected the DVD - but nothing was on the DVD.
Later I used DISK UTILITY to burn the disk image to a DVD- and that DVD played fine on my Mac and even on my 7 year old DVD player.
OK so my MB DVD burner is working; the iDVD makes a valid Disk Image-- but why can't I go directly from iDVD to a DVD?
Thanks for any comments here -- I believe there has been a bit of discussion on this, but not sure if others are able to make a DISK IMAGE and then (if then) burn a DVD as I have. But I'm still not able to do this directly from iDVD.
Regards,
Steve Schulte
Monday 9 March 2009 at 10:50

Hi Beverly, I am using the imovie 09 version with iDVD 09. I didn't do any more editing after sharing the project to iDVD from within imovie. I get no error messages at all, that's the strange thing. It acts like it is encoding fine. But, when you watch the finished product, either a disc image or a burned dvd, it is garbled up from about halfway thru to the end. I even tried to have idvd save the project as a disc image and then used Toast 9 to burn it, and it is the same way, messed up. Just to be sure it wasn't the imovie 09 doing it, I took the same imovie 09 project, put it in Toast 9, and let Toast save it as a disc image, and it was fine. And I burned it with toast and the dvd played fine. I then tried to share the same project again, from imovie 09, to idvd 09, and save to disc image, and or burn it to dvd and again, it messes it up badly. This is a brand new imac bought from the apple store locally. I really can't understand why idvd 09 is this bad? It doesn't make any sense. I've eliminated imovie 09 as the problem. Like I said before, I have a lot of experience using the previous versions of imovie 6, and idvd 6 on a powerbook G4, without any problems? Oh, and I did get the menu sound to work, but not the method listed here. I tried all of those listed, without success. I found that if you keep dragging out the menu sound, and replace it with a new mp3, and drag it out, it finally works. I did this about 6 times. Then, all of a sudden it worked. Makes no sense at all. I never did see the little wave sound thing he talked about. It works now, but the wave isn't there? If there is a way to just remove idvd 09, and replace it with idvd 6.04, I'll do that. Is this possible?

Idvd will not burn a dvd

I have tried to burn a dvd with no luck, I have a macbook for over two years and never has the idvd been able to burn a dvd. The dvd is ejected just before it is done "less than a minute remaining" the disk is always blank. I have put several projects together in idvd and can only view it on my macbook. Everything is updated, I have spent alot of time tring to get the idvd to burn but no luck. Is there anything else that I can use to burn a dvd?

Compose the DVD, recording it to the desktop. Will have img after the name. After you've composed the DVD ready for burn, instead of using iDVD, choose from the top left, drop down menu, for burn to disc image. (That's the same menu drop down you use for choosing your film in the first place.) When that's done, click on the disc icon which has appeared on the desktop, that one with img after the name, and that will make a box appear showing video and audio records. Click on the red + to get rid of it. That action will have made the disc to be seen and ready for burn in Utilities. Chose Go from the screen top and then Utilities - Disc Utility App. On the left side of the box is that name followed by img. Click on it. Go the top and in Images menu go down to burn and click on it. Your drawer ready for the burn should open. Pace your disk in the tray and choose Close. When Burn comes up, small box to the right, click on that and await results. Good luck.

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Premiere Elements 10 will not burn a DVD. It stays at 99 percent and will not complete the burn.

New HP 1107c. Cannot burn a DVD with Premire Elements 10 64 bit. Works OK on a 64 bit Dell. Could this be a DVD hardware problem ? Turned off all Microsoft services via msconfig, disabled virus and spyware software, but still hangs at 99 percent burn

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Project in PRE10 will burn as blu-ray but will not burn as DVD.

I created a project of still images in PRE10 with the NTSC-HDV-HDV 1080i 30 settings. I burned the project as a blu-ray and it turned out great. I tried to burn the same project to a DVD and it goes through the encoding process fine. However, when it gets to actually burning on the disk it completes about 5% and then abruptly finishes saying the burn is complete although no files are written to the DVD (it is still blank). The same thing happens when I try to burn the project to a folder (no files are created). I have created other projects with this setting and am able to burn to either blu-ray or DVD. Any ideas on why this happens?

As your Blu-ray results are good you must have large scale images in your project. What are the pixel dimensions of your still images?
Your project is High Definition 1440x1080i, whereas DVD is Standard Definition 720x480. This means that PRE has to scale down the images. Unfortunately PRE is not too good at downscaling and can choke the program.
This tips & tricks article has a lot of information about this issue: Large Still Images into PE - One Workflow.
That article, at 111 items, is rather long. In a nutshell though it recommends still images be scaled in photo editing software to the target size - 720x480 in your case or, if you want to do some pan & zoom, around 1000x750.
So for your particular case you should resize your large images. If you do this in exactly the same proportions as your HD project images you could then replace those in the existing timeline with the smaller and perhaps your project will then complete burning.
[EDIT] Also check out this FAQ entry: What resolution should my photos be in Premiere Elements?
Message edited to include FAQ entry.

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

IBook G4 + Lacie D2 will not burn iDVD movies?

I have a new ibook G4 with an external Lacie D2; and I can't get any of my iDVD projects to burn. I get mulitplexor errors. So I did as the posts say, and cleared my cache via OnyX, Disk Utility App to repair permissions. Downloaded the latest Lacie drivers. It will burn via Toast 6 (only data DVD). But every time I try with iDVD it fails. Disc images port out correctly with iDVD, but those files will not burn to DVD via Toast and work on my set top DVD player? Any help? Thanks ahead of time!
LUKE
ibook G4 Mac OS X (10.4.3)

I, too, have not been able to successfully burn a DVD through any Apple application, including Disk Utility and Backup. The only thing that's worked for me is to save my iDVD project as a disk image, and then burn the DVD using Toast. It takes longer, but at least I'm not wasting DVDs.

Idvd will not burn after upgrade to maverick

Hello-
I just upgraded to maverick and now iDVD will not burn a DVD - says it does not have a compatible superdrive. It was working fine until I upgraded. How can I burn a nice DVD now?

Suggestion only. Before launching, did you also check for updates via apple's software updater?

IPhoto images will not appear in Media browser

After updating my iLife apps (iLife '09), iPhoto images no longer appear in my media browser. In iMovie, it just says "Loading iPhoto Images", but never does. I am using a Macbook with OS X 10.5.8 and 2 GB memory. Images will not appear in iDVD either. Anyone have any thoughts?

Do you still have the old library? Rebuilding it with iPhoto Library Manager would preserve most of your work.
This will creates a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

IPhoto Slideshow images will not burn to DVD -- Green Screen

Similar Messages

Maybe you are looking for