IPhoto slideshow reveals partial desktop in background

When I view a slideshow with my display (resolution is 1360x768), iPhoto doesn't fully blacken out the background. I can see my desktop in a vertical strip down the right, about 100 pixels wide. Is this because IPhoto will not display properly at this resolution?

No, of course not. But doesn't iPhoto have the capability to display in 16:9 without stretching, AND filling the entire screen?
Just to be clear, I'm not talking about the black background behind the slideshow photos. My problem is that the black area doesn't fill the entire screen. There's an area on the right where I can see my desktop and icons.

Similar Messages

  • I have a MacBook Air and recently downloaded the new operating system. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it?

    I have a MacBook Air and recently downloaded the new operating system, 10.10 OSX Yosemite. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it to the I Photo slideshow?

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • I exported a iphoto slideshow to desktop, converted it to mpg file by using BURN app, burned to DVD and exported to a USB flashdrive. The DVD looks great but flashdrive is extremely fuzzy. What is the difference and how can I make flashdrive sharper?

    I exported an iphoto slideshow to desktop, converted it to mpg file by using the BURN app, burned it to a DVD and exported it to a USB flash drive. The DVD looks great and very sharp but the slideshow on the USB flash drive is extremely fuzzy. What is the difference and how can I make the slideshow on the flash drive look as sharp as the DVD?

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.

  • Displaying iPhoto slideshows on external display

    I'm trying to get my wife's MacBook Pro w/ iPhoto '09 8.1.2 to display the slidehow on an external VGA monitor. She's using the miniDisplay port to VGA adapter. The symptom of the problem is a slideshow on the built-in Display (OK) but a black screen on the external display.
    Current workaround:
    The slideshow plays fine on the external VGA display when "Turn on Mirroring" is selected in Display Prefs.
    BUT....
    She doesn't want to turn on/off mirroring every time she wants to show photos. There's no settings in iPhoto that I found that would specify using an external monitor. Quicktime Player DOES allow you to do this. Does this feature just not exist for iPhoto slideshows? Was the slideshow function only intended for a few people to huddle around a computer screen? Hopefully it's more than that.
    My wife's comment was "MS Powerpoint is smart enough to display my PPT presentation on the external display, why isn't iPhoto smart enough to do the same thing for slideshows."
    I think this is a reasonable expectation of Apple iPhoto but the solution eludes me. I really don't want to have her use the export function in iPhoto as this seems like an unnecessary waste of hard drive space and time. It seems like the feature is sooooo close to being great but it's not (Apple had enough foresight to include an instant slideshow function).

    Greetings,
    As you pointed out, iPhoto supports mirrored display mode. In extended desktop mode, only the one display is used (this is normal).
    When I want to use an external display / projector / TV with my images:
    __Use Quicktime player
    __Use an AppleTV to stream iPhoto content directly to my TV
    __Use Keynote (Apple's Presentation software kinda like MS Power Point) to play a presentation
    If you would like to see iPhoto support extended desktop mode submit feedback from within the iPhoto Application:
    iPhoto > Provide iPhoto Feedback
    or
    http://www.apple.com/feedback/iphoto.html
    Cheers.

  • Once exported, half of iPhoto slideshow is white.

    I can not, for the life of me, get my iPhoto slideshow onto a DVD.  I can't even get it to play, on my desktop, without half of the video white.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • IPhoto slideshow in iDVD project

    I have some questions on problems creating a iDVD project of an iPhoto slideshow:
    1. Is it possible (how ?) to create buttons for scene selections, as in iMovie ?
    My project contains one continuous slideshow (942 still pictures) which I want to divide in
    chapters relating to the varuous trips I made during one travel.
    If not in iDVD: has this breaking up of a single iPhoto slideshow be done in iMovie or iPhoto itself,
    or by way of creating a 'Magic iDVD' ?
    2. Can audio be imported with different sound clips ?
    As for now my audio clip (3 min) repeats itself endlessly till the end of the project (48 min), and I
    want to use various songs out of my iTunes library.
    3. For a slideshow with its speed matched to the lenght of an audio clip, 10 seconds seems to be
    the longest duration for one single picture. Can this be lengthened ?.
    In my actual project, 10 seconds for each picture in combination with a cross dissolve seems
    to work too fast in my slideshow.
    I expected this transition to be added to their duration; instead it seems to take seconds away
    from the linked stills.
    If all these problems can't be adressed in iDVD 6: is iDVD 8 the better option ?

    To get the versatility that you want, and because this is a complex project for iPhoto, I suggest that you bring iMovie into the work flow.
    I would create a separate iPhoto slideshow for each segment of your trip (eg. Italy, France, etc.)
    Then export each slideshow to your desktop as a High Quality Quicktime movie. There will be no loss of quality. Then create an iMovie project, and drag each Quicktime movie into the project. You can add your audio in iMovie, as well as chapter markers. Then save and close, and drag the iMovie icon (the one with the star on it) into an iDVD project. Just drag it to the edge of the iDVD display menu so it doesn't fall into a drop zone. Then save your iDVD project as a Disk Image (an option from the File menu). This will take awhile because all the encoding will be done as if you were burning a disk. To play the disk image, double click on its icon, and then open the DVD Player app on your Mac. Make sure it plays O.K. Then close it, and open the Utilities/Disk Utility app on your Mac. If it's not already in there, drag your disk image icon into the left side display panel in the Disk Utility Window. Then insert a DVD-R disk into your drive and hit Burn. The burning process will be fairly quick because all the encoding already was done when you created the disk image.
    As far as I am aware, you cannot extend the length of a photo in an iPhoto slideshow beyond what the settings will allow you to do. If you want to go beyond that, I would suggest creating your slideshow in iMovie where you can display the photos for as long a duration as you want. In my opinion, 10 seconds duration for a photo is way too long, particularly when you have 942 still pictures. Whew! I would keep it to 5 seconds at most. You can always use the remote pause button of your DVD player if you want to display to your viewers a particular photo for a longer time.
    In an iPhoto slide show you can import different audio with different sound clips. Go to iTunes and make up an album of the songs that you want to play in your slide show. Then, when you select your music from the media pane in your iPhoto slide show, select the album that you created, and the slide show will play those songs in succession as your slide show runs.
    The cross dissolve transition will shorten the display duration of the photo on each side of it, and thus shorten the overall display time of the slideshow. The overlap transition will not shorten the overall time display.
    I hope this helps. Good luck with your project/.

  • Burning an iPhoto slideshow onto a DVD

    How can I burn an iPhoto slideshow onto a DVD?  I have created a slideshow with music but cannot determine how to burn it to a DVD.  I've tried to use iDVD but cannot figure it out.  I need very basic instructions, please.
    Thank you!

    Depends on information you do not supply - but burn a slide show to DVD export it to the desktop as a QuickTime movie and the using the finder burn it to dial - it can be played on any device that can play QuickTime
    To play on a DVD player it must be authored which requires iDVD or other authoring software like Toast - neither involves iPhoto - there is a iDVD forum and Toast has a support forum
    LN

  • How do I export an iPhoto slideshow from my iMac to my iBook?

    How do I export an iPhoto slideshow from my iMac to my iBook?

    For the slideshow in the form of an Quicktime movie just export the slideshow via the export button at the bottom of the iPhoto window
    and select the size to be created
    If you want to have the slideshow in your iBook's iPhoto Library as it is in your iMac's library you'll need to copy the entire library from your iMac to your iBook. 
    A 3rd option is to export the photos used in the slideshow to a folder on the Desktop, copy that folder to the iBook, import into the iBooks library and recreate the slideshow.

  • How do I send an iphoto slideshow to facebook

    I am computer illiterate and can't figure this out.
    I made a slideshow on iphoto but want to export it to Facebook to post on my page...  how do I do it?
    Sorry,
    Thanks,

    Export the Slideshow to the desktop (that will make a movie of it) and then uplod it from there.
    Note: if you are using music, many folks find that FB reject the slideshows for copyright reasons.
    Regards
    TD

  • ATV iPhoto Slideshow with/Music

    Hi-
    I recently purchased an Apple TV to show my iPhoto slideshows on my flat-screen TV. I am a wedding photographer and use the slideshows as part of my presentation to potential clients. These slideshows have music playing in the background and in iPhoto the music is set to loop until all of the pictures have been displayed. Unfortunately on my Apple TV the song plays once and then stops, for some reason it is not looping in the ATV as it does on iPhoto. I called Apple support and was told that is how it works. I find it hard to believe the that the ATV would display the slideshow different than how I have it setup on iPhoto. Anyone else experience this?
    Alex

    That's odd, I'm able to loop a single song to my photo slide shows on my tv.  You can do this by creating a playlist in itunes on your computer that contains the song you want to loop.  Sync your playlist back to your tv.  Go to Photos from the tv menu and select Slide Show Preferences > Music, select the playlist that you just created in itunes with your song of interest for looping.   Back out of the music menu to Slide Show Preferences and set Repeat to "On" below the music menu.

  • No sound when I play iPhoto slideshows on Apple TV

    I've loaded music and photo's onto my Apple TV. Before I downloaded the 2.4 software, the music in my iPhoto slideshows played normally. Since the download the slideshows play as I set them up in i'photo but there is no music. My music files are loaded onto Apple TV and will play independently of the photo slideshows.

    Seems like even more have this problem, and that it is attributable to 2.4:
    http://discussions.apple.com/thread.jspa?threadID=2056738&tstart=15
    Seems extraordinary that an Apple software "upgrade" turns out to be a downgrade and that customers aren't warned before accepting it. Perhaps there's a good reason for this which Apple will reveal in due course, but in the meantime, for customers who want their slideshow music, why can't Apple allow a rewind to 2.3 or an earlier upgrade, to a position somewhere between what's available from the factory reset and 2.4?
    It would seem that Apple TV's functionality has declined as a result of 2.4 and that the product is no longer as good as it was. In fact, every Apple TV with earlier software would seem to work better than the current model. Apple seems to have gone backwards with 2.4, not forwards. Does anyone know if the folks at Apple care, or read these forums?

  • Iphoto slideshow in imovie?

    I have made a slideshow in iphoto.
    I would like to use this at the begining of a movie in imove.
    Can this be done?
    Many thanks

    I don't know which version iPhoto you have but the one I've got has an Export button sitting right next to the Play button when I have a slideshow open in iPhoto. Click on Export and in the options available choose the "Large" size. This is the exact same dimensions iMovie uses to edit your projects when you are working on video. Uncheck the box marked Open in iTunes when done (you don't want to send it to iTunes). Also, choose to save it to the desktop so you can import it into an iMovie event when you are done. It will be saved into the iPhoto Slideshows folder inside the Pictures folder in your home folder. Go the File>Import>Movies... then click through to where the Slideshow movie was saved.

  • How transfer IPhoto Slideshow from computer to Laptop

    How can I transfer my iPhoto Slideshow from my mac desktop to my mac laptop.  When I try to transfer I get error message OSStatus 61.

    How are you going about this transfer?
    It might be better to share the slideshow to a video and transfer that to the laptop.

  • Iphoto/slideshow/quicktime question

    Hi all:
    My son needs to be able to make slideshows from time to time for homework. For some reason, his G3 imac 400 (Panther) is having a problem here. We can export the slideshow to a quicktime movie, but we lose most of the soundtrack. Actually, we only get about 3 seconds of soundtrack then it goes dead, but the pics keep cycling through. Any ideas as to what's up here?
    thanks.

    Ok....
    Problem solved.
    However, I'm not sure I understand why. But here's the deal: 2 identical imacs (G3 400, w/ 256mb ram....same version iphoto, itunes & quicktime). System #1 worked, system #2 didn't. After playing for half the day, I realized that System #1's working tune was an *mp3* tune, whereas System #2 was using an AAC tune. Further investigation revealed that both imacs were acting the same. Both would successfully export an iphoto slideshow/with mp3 song to quicktime, & both choked if the itunes song chosen was an AAC.
    So......I can live with this.
    If anyone can clear up *why* I can't use an AAC tune, that would be great, but truth be told I can live with it the way it is now.
    thanks!

  • Keynote '08: How to export an iPhoto slideshow into Keynote

    Is it possible to export an iphoto slideshow into keynote?
    Thanks!

    Answered my own question! Exported iPhoto slideshow to desktop - where it appeared as a .mov file -- then dragged & dropped that into Keynote. It plays there, photos & music exactly as designed in iPhoto - remote works to start and stop also! Perfect!

Maybe you are looking for

  • Trouble being unable to download movies

    Hi, I have successfully downloaded movies from itunes for a while now.  However, tonight when I tried to download two separate movies, I received the following errors: There was a problem downloading the movie. Part of the files seems to be corrupted

  • When ever I click on a page in Firefox, I get the message that Firefox has stopped the loading of that page, with an "allow" box in the upper right corner of th

    When ever i try to migrate to another page, the browser puts up a blank page with the message that Firefox stopped the loading of the page, and there is an allow button in the upper right corner of the blank page, which i have to click on, to get to

  • Give exception on RFC

    Hi Experts i have used RFC in CRM dev system to get the data from R/3 system as follows:   CALL FUNCTION 'ZCTP_BP_READ_CONTACT_DATA'     DESTINATION w_r3     TABLES       t_parnr     = t_parnr       t_knvk      = t_knvk       t_adcp_cust = t_adcp_cus

  • Disable to update a sales orders

    Hi How can i disable the update a sales order if some one try to change project field? Can i use the SPO_TransactionNotification? I could not find a way to work in the sp. So i´m asking if someone already had the same situation and can help me. Kind

  • Hyperion Reports v.7

    Hi - I am trying to create a report that will display a few accounts results for the year 2008 that are Unpaid, ie, License Fee and Rental Fee, but I need the report to also dispay the Company and the Title along with it. In my Grid, I have License F