IPhoto slideshow to project on a screen

i'm creating an iPhoto slideshow to project on a screen at a wedding. For photos I need to scan, what dpi and resolution do you suggest I use to get a crisp image?
thanks,
christina

Your're in the wrong forum.
Tip: scan as large as possible.

Similar Messages

I get this pop up when trying to make a photo book in the iPhoto store. Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import t

I get this pop up when trying to create a photo book through the iPhoto store.
"Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import them to your photo library."
The photos I have selected have already been imported so how and why do I do it all over again?
What do they mean by published albums? I categorize them into photo albums for organizational purposes after I import them from my camera or phone. So why can't I put them into a book now?
I have over 400 photos selected for a photo book for my child's graduation gift so how can I tell which photos I have to do this to?
Please help. Any insight wouyld be appreciated.
Confused and frustrated...

Give this a try: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
OT

IPhoto slideshow in iDVD project

I have some questions on problems creating a iDVD project of an iPhoto slideshow:
1. Is it possible (how ?) to create buttons for scene selections, as in iMovie ?
My project contains one continuous slideshow (942 still pictures) which I want to divide in
chapters relating to the varuous trips I made during one travel.
If not in iDVD: has this breaking up of a single iPhoto slideshow be done in iMovie or iPhoto itself,
or by way of creating a 'Magic iDVD' ?
2. Can audio be imported with different sound clips ?
As for now my audio clip (3 min) repeats itself endlessly till the end of the project (48 min), and I
want to use various songs out of my iTunes library.
3. For a slideshow with its speed matched to the lenght of an audio clip, 10 seconds seems to be
the longest duration for one single picture. Can this be lengthened ?.
In my actual project, 10 seconds for each picture in combination with a cross dissolve seems
to work too fast in my slideshow.
I expected this transition to be added to their duration; instead it seems to take seconds away
from the linked stills.
If all these problems can't be adressed in iDVD 6: is iDVD 8 the better option ?

To get the versatility that you want, and because this is a complex project for iPhoto, I suggest that you bring iMovie into the work flow.
I would create a separate iPhoto slideshow for each segment of your trip (eg. Italy, France, etc.)
Then export each slideshow to your desktop as a High Quality Quicktime movie. There will be no loss of quality. Then create an iMovie project, and drag each Quicktime movie into the project. You can add your audio in iMovie, as well as chapter markers. Then save and close, and drag the iMovie icon (the one with the star on it) into an iDVD project. Just drag it to the edge of the iDVD display menu so it doesn't fall into a drop zone. Then save your iDVD project as a Disk Image (an option from the File menu). This will take awhile because all the encoding will be done as if you were burning a disk. To play the disk image, double click on its icon, and then open the DVD Player app on your Mac. Make sure it plays O.K. Then close it, and open the Utilities/Disk Utility app on your Mac. If it's not already in there, drag your disk image icon into the left side display panel in the Disk Utility Window. Then insert a DVD-R disk into your drive and hit Burn. The burning process will be fairly quick because all the encoding already was done when you created the disk image.
As far as I am aware, you cannot extend the length of a photo in an iPhoto slideshow beyond what the settings will allow you to do. If you want to go beyond that, I would suggest creating your slideshow in iMovie where you can display the photos for as long a duration as you want. In my opinion, 10 seconds duration for a photo is way too long, particularly when you have 942 still pictures. Whew! I would keep it to 5 seconds at most. You can always use the remote pause button of your DVD player if you want to display to your viewers a particular photo for a longer time.
In an iPhoto slide show you can import different audio with different sound clips. Go to iTunes and make up an album of the songs that you want to play in your slide show. Then, when you select your music from the media pane in your iPhoto slide show, select the album that you created, and the slide show will play those songs in succession as your slide show runs.
The cross dissolve transition will shorten the display duration of the photo on each side of it, and thus shorten the overall display time of the slideshow. The overlap transition will not shorten the overall time display.
I hope this helps. Good luck with your project/.

Inserting iphoto slideshow into fcp project

Is it possible to insert an iphoti slideshow into a fcphd 4.5 project? A friend hired me to create a slideshow for her son's funeral and then to videotape the funeral. Now I would like to insert the slideshow into the video of the funeral but haven't the slightest clue how to do so.
Any help would be MOST appreciated!
Thanks in advance,
Katherine
Power Mac G5 Mac OS X (10.3.9) iphoto 06

You can't as far as I can see...
Right, and I should have realized that when I put the screenshot up.
Sorry. Another reason not to do the slideshow in iPhoto.
One alternative, I guess, is to burn the iPhoto slideshow to DVD using the Share -> Send to iDVD command. Then you can rip that DVD back into QuickTime using DVDxDV or ffmpegX or something else.

IPhoto slideshow in iChat theatre less than screen resolution

I tried to share an iPhoto album in iChat theatre. It is presented as a slideshow but the photos looked very unsharp/pixelated, actually lower than screen resolution. If I drag individual pictures from iPhoto to the lower part of the iChat window (which means show that picture in iCHat theatre), they look fine.
It can't be a bandwidth issue, as I tried it in my LAN.
Anybody else observed that issue?
Peter

Thanks Ralph,
it did help a bit.
But I probably expected too much from iChat theatre. I initially thought, iChat theatre would be a great way to present an iPhoto slideshow remotely with life comments. But everything you share is basically the smallish slideshow window you see on the sender side upscaled to whatever the recipient has set its iChat window to and heavily compressed. Seems like iChat combines everything on the sender side into a single H.264 stream and sends it over the net, thus the heavy compression artifacts even on still images.
So it is ok for some quick snaps in mobile phone quality but not for quality slideshows. Looks like I have to stick with web galleries or Photo-casting for these.
If anyone knows of another solution to present a slide with higher quality over the net, with the ability to do life comments, which implements at least, that you know, which slide the recipient is watching currently, please leave a note.
Peter

Iphoto slideshow to idvd: quality & burning issues...

I've made a few slideshows in iphoto due to the Ken Burns effect and also the ability to choose full screen or widescreen. I made DVDs for friends with full and myself with wide for my widescreen- and that works fine.
My question is about the quality of the movies. Obviously a substantial loss of quality from viewing the show in iPhoto on my Powerbook...
Is there a better way to do this with better results? Using iMovie? (Never have used that app before..) Each show has 100-250 slides and I choose a music playlist from iTunes. I am a quality freak and looking the uncrisp images isn't too thrilling.
(Even when playing the disk image in the DVD Player on my Powerbook and comparing with the original project file- it's a little more fuzzy.)
Also, I just got an external Lacie burner (I have combo drive) and have much unsuccess with burning. I have repaired permissions and create as a disk image in iDVD. It plays back great from the disk image in DVD Player on Powerbook. This specific movie is 2.4 GB and I have 10.1 free dis space.
Problems: (tried with 2 or 3 different movies)
*Disk Utility will not burn the image. It begins and then stops and says there are errors (not specific)...
*iDVD goes through 4 or 5 steps and right at the end says "Errors during burning"
(I was also getting a multiplexing error, but I freed up some space and didn't get that last time)
*TOAST- Using the DVD-Video from Video-TS (as recommended on various boards) does not work. It finishes but won't verify and nothing plays...
*TOAST- using DVD-Video: The menu made in iDVD isn't functional. Can't choose different slideshows... Won't highlight, etc...
*TOAST- using "Data" DVD-ROM (UDF):
THIS IS THE ONLY THING THAT HAS WORKED AND PROJECTS ARE ABLE TO BE VERIFIED. MENUS ARE FUNCTIONAL IN MY 2 DVD PLAYERS...
I have the newest versions of Toast and iPhoto and iDVD. It's been very frustrating. Can't figure out why iDVD and Disk Utility won't burn... and TOAST only works using "Data" instead of Video... My Powerbook is a 60 GB 12" G4 1.33 model. I'm so tempted to upgrade to a bigger hard drive and a Superdrive but I don't know if that will help anything.
Thanks for listening!

Video DVDs are 720X480 (NTSC). Much lower resolution than straight iPhoto slideshows and your original photos. Nothing you can do about this until either HD-DVD or Blu-Ray technology come to the market and are affordable.
iMovie will not be better resolution after it is sent to DVD. You could export to HD resolution QT files (H.264, etc.) and play those on computers with QT and keep higher resolution. But those won't play with commercial DVD players.
Disk Utility will not burn the image.
Can you verify the mounted image with Disk Utility?
Can you burn other data DVDs with the finder and with Toast succesfully?
You should be able to use both the Video_TS drag into DVD-Video for Toast and the direct image burn in Toast, as well as Disk Utility. I wonder if there is an error in the image, so see if you can verify the mounted image with DU.
John B

Poor photo quality when exporting iPhoto slideshow

Does anyone know which setting produces the best quality for an mp4 when creating a DVD using iDVD? I put a slideshow together using iPhoto because I wanted to use the iPhoto scrapbook theme. I exported the iPhoto slideshow using the highest quality (standard display setting) which produces an mp4 1422 x 800 (H.264, 30 fps, 7 Mbps, ~907 MB).
The iDVD project settings are:
1) Best Performance
2) High Quality
3) Professional Quality
What doesn't make sense to me is that #1 claims to produce a total ~1GB DVD with a 995 MB movie and shows the Quality level as green.
When selecting #2, the claim is a total ~643 DVD with a 575 MB movie with Quality in the red.
When choosing #3, the numbers stay the same as #2 but the Quality goes to yellow.
Why wouldn't the higher quality settings produce a larger DVD with less compression? Which setting really gives the highest quality?
The default is #1 (Best Performance) which clearly produces the lowest quality video when compared to the mp4 export from iPhoto (appeared with a higher quality) and when compared with playing the slideshow directly in iPhoto (appeared with the highest quality).
Would the quality be any higher if I export the iPhoto slideshow using a customized setting? iPhoto custom settings allow the choice of about 10 different compression types from Animation, Apple Intermediate Codec, to DV/DVCPRO - NTSC, to H.264, to MPEG-4 Video, to None (and others not listed here). The frame Rate can also be adjusted from Current (whatever that means), to 8, to 60. The Compressor Quality can be adjusted from Least to Best. Would "None" as the compression type produce the best quality when producing the iDVD?
The ultimate goal is to display the slideshow on the project at my church. The easiest way to do this is to put it on a DVD. But as described above, the quality decrease from iPhoto direct play of the slideshow is noticeable when moving to the .mp4 and extremely noticeable when putting the .mp4 in iDVD and playing the DVD back.
Thanks in advance for any suggestions or links to better documentation.

you just cannot export your slideshows in order to burn DVDs, with the same quality
That's an issue with iDVD and the DVD standards. All DVD media is downsized to 640 x 480 or the wide screen 720 x 480. It's the nature of DVDs, not iPhoto. If you use the Ken Burns effect in iPhoto you will need to use the largest 4:3 ratio images possible so the zoom and scan of the KB effect is working on the most number of pixels possible.
I've found that the best final image resolution is obtained by creating the slideshow in iDVD from stills imported from iPhoto at the 4:3 size ratio. The downside to that method is no KB effect and only one transition per slideshow. I play those types of slideshows on a 50" 1020p HD Panasonic plasma TV and the images are quite good. But good is in the eye of the beholder.
See Jim Symon's post in this iDVD topic: Re: High-definition DVDs. Also search his other posts as he was working out a workflow using Photo to Movie to create high def movies and burn them with iDVD. As I recall he found and posted his workflow at one time.

IPhoto slideshow imported into iMovie - photos no longer fit in frame

I imported an iPhoto slideshow into iMovie. The event that is created matches the iPhoto slideshow. However, when I drop the iPhoto slideshow into into the new project, I am losing the tops and bottoms of my photos. For most of the photos this is okay, but for some it end up chopping off heads! I have gone back to iPhoto and adjusted photos to add dead space at top/bottom of photos, but this is not possible in all cases.
I exported from iPhoto using Export/Display mode per the instructor in the One to One class.
This project is a workaround to my original problem of distortion issues when I created the slideshow directly in iMovie.
Have a hard deadline to meet, any help would be appreciated!

When creating a slideshow in iPhoto (for sharing), you can select an appropriate aspect ratio to suit your target, i.e., where you intend to use the slideshow.
After clicking the + button in the bottom left corner of iPhoto and selecting Slideshow, click on the Settings tab. At the base of the Slideshow Settings window you can select the aspect ratio. Mine shows the following choices:
This screen (16:10)
HDTV (16:9)
TV (4:3)
iPhone (3:2)
When creating a slideshow that I intend to import to iMovie '09 I always select the HDTV setting (16:9). This works well, providing you initially position individual slides appropriately in your iPhoto slideshow, e.g, to prevent heads being chopped off!
John

IPhoto slideshow has wrong aspect ratio for iMovie and/or FCP

When I output a slideshow at 720x480 from iPhoto then import it into iMovie or FCP, the images are stretched vertically. I can adjust the ratio in FCP (-10 seems to be a good number), but there is no fix for iMovie. I like the iPhoto slideshow capability and prefer using it for my slideshows. What do I do to get an unstretched QT for import into iMovie or FCP?
AGP Powermac G4 Mac OS X (10.4.4)

You're encountering a difference between rectangular DV pixels and square "computer screen image" pixels.
When working with DV timelines, the best way to get good frame grabs would be to export your 720 x 480 still, then re-size it to 640 x 480 using Photoshop. (BTW, you can use a Photoshop batch function to re-size multiple images automatically.)
If you're starting with a timeline that only contains square-pixel (not DV video) images, try this:
Sequence > Settings > General Tab
Pixel Aspect Ratio: Square
Now:
Open a clip in the Viewer window, and look under
Motion Tab > Distort Pane
Aspect Ratio should = 0
[Under certain conditions, FCP makes educated guesses as to the pixel aspect ratios of imported images, and uses this setting to automatically apply corrective distortion when it believes it is necessary. Usually it is correct, but under unusual circumstances like your project, you may have to correct FCP's correction.]
The fastest way to confirm this would be to
Select All
Ctrl-Click
Remove Attributes
Check "Distortion"
[If it is greyed out it means that none of your clips have any distortion applied so you are good to go.]
Now you can export un-distorted frames from a square-pixel timeline, and shouldn't experience any pixel-aspect ratio confusion.
Good luck,
Zap

How do I create the highest quality dvd of an iphoto slideshow?

I have created a large (550 photos) slideshow in iphoto using one of the iphoto templates and added music to the slideshow. The photos are high quality/large file size photos. I would like to then combine the iphoto slideshow with an imovie trailer. When I have gone through through the process of exporting the slideshow out of iphoto and into imovie and then burning a disk with idvd, the quality of the dvd is poor. I am using the latest versions of iphoto, imovie, and idvd. I would appreciate any advice on how to produce the highest quality dvd from the slideshow as it is part of a gift recapping a trip.

Here's one approach: First crop the photos to the iDVD size ratio, 4:3. Export the movie out of iPhoto via the Export button and select Size = Medium or Large. Remember DVD video format is standard definition only. All media gets reduced to 640 x 480 before burning to disk.
Don't add it to iMovie as that just adds another layer of compresson/encoding to it.
In iMovie create the trailer and use the Share ➙ Media Browser option. This produces a better file image than the Share ➙ iDVD option.
In iDVD create a Slideshow and add the trailer from the Media/Movies pane and drag the iPhoto movie after it.
Set transitions to None and slide duration to anything but Manual. Do not add any audio.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If you find that the resulting movie/slideshow extends off the TV screen and looses some of the image you can set the iDVD/Slideshow preferences to Scale Photos to TV Safe Area.
That may add black areas to each side of the movie depending on the size ratio of the TV screen and aspect ratio set in the DVD player.
NOTE: if you have access to a copy of iMovie 6 HD I suggest you use it for your slideshow from photos and the trailer. It produces the best results with iDVD and allows far better audio control. If you do have that version just drag the completed iMovie project file into iDVD to avoid another layer of encoding/compression.
OT

IDVD/iPhoto slideshow issues

I've been reading in these discussions and although I've learned quite a bit, nothing has helped fix my particular issue. first let me just add my two cents here, I just used the iDVD/iPhoto slideshow to make, process, and burn to disks extensively in June, and used some of the same photos as now, and there were no problems with quallity, nothing, so I'm saying these issues have come about with updates or changes since then in the way the programs work.
That being said, here's my problem the final disk distorts the pictures in the slideshow, they look as though there are moving parts in some of them, a sort of waving shaky effect, reminds me of the old television sets when there was a problem with the vertical hold and were about to start rolling, remember that? Also, over saturated color, and darker.
This is what I have tried to improve the final burning, I saved the slideshow from iDVD to disk image and burn the copy in disk utility, if anything, the distortions were more noticeable.
Then I recreated the slideshow in iDVD by sending it from iPhoto, checked all the boxes for Ken burns on all the individual pictures, as well as making sure it was checked in the settings, I changed the format to wide screen then saved to disk image as soon as it was finished, and played it in the DVD player, where it was distorted as disks burned from iDVD, (interestingly enough when played through the iDVD the show is beautifully rendered with no distortions, so there goes the theory aboout monitor vs television being toi blame). I bought verbatim DVD disks, but if the DVD player already shows distortion, it is not in the burning process, but in the processing in iDVD.
During this several reports have been sent to apple on my behalf, saying iDVD suddenly quit, when in fact it hadn't or I had simply closed it, but there were reports so I sent them.
Something within the progarms has changed. Is this an issue waiting to be fixed? Do I have to do something different because of a change? Quite truthfully, I am too ignorant to make the whole slideshow in iMovie, I've tried, it's too much for me and I don't have the time or inclination to learn it when I was extremely happy with the way iDVD/iPhoto made my slideshows before.
Any suggestions would be appreciated. thanks

Have you read: iDVD 6.0 Help - Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html ?
Feeding iDVD high-resolution still images doesn't help quality.
the final disk distorts the pictures in the slideshow, they look as though there are moving parts in some of them, a sort of waving shaky effect ..
When sharp, still images are used you will see interlacing effects that make parts of images flicker. Images on a TV set are interlaced - meaning you see two slightly different images (called 'fields') that alternate at a 1/60 second rate making the image appear to 'shimmer' of 'flicker'.
(interestingly enough when played through the iDVD the show is beautifully rendered with no distortions, so there goes the theory aboout monitor vs television being to blame).
Sorry, but using the preview function in iDVD does NOT represent the final quality of the DVD that will be produced because it uses the uncompressed source material - think of it as a 'for position only' view of the project.
iDVD produced DVDs WILL look better on a conventional CRT TV set (which has less than 640x480 pixels in NTSC) than it will on a computer monitor (with many more pixels) full screen.

Is there any way to get 720x576 (ie DV Pal) from iphoto slideshow?

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow? I want to export 200+ photos with random transitions and the ken burns effect. Imovie offers offers automatic ken burns effect via project properties but I can't find a way to add random transitions automaticcally. Is it possible? I want to add the exported file to a movie in Final Cut Studio. Normally I have to resort to using adobe photoshop elements 5 and premiere elements 3 on my bootcamp partition. I would love to do this all in Mac OSX - since leaving Windows, this is the only thing that forces me to use that lousy operating system!
Thanks in advance for any help.

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow?
Not directly. But you can do it with a bit of external help. Create a slideshow project in iPhoto using the "Random" transitions and auto KBE you want. Then export the slideshow as a 640x480 MPEG4/AAC 30 fps full motion MOV file. Drop the file to MPEG Steamclip and select the "Export to DV" File menu option. The select the DV format, PAL standard, and aspect you want. (I would normally select the "Frame Blending" option in the main menu when going from 30 fps to 25 fps.)

Using Keynote and iPhoto slideshow together

Computer: 12" Powerbook G4, 1.5ghz
Display: 23" Apple Cinema Display (1920x1200)
Software: OSX 10.4.9, Keynote 2, iPhoto 6
Hi everyone! Above are the specs for the project I'm working on and here's the problem I'm having:
I am trying to create a makeshift kiosk display for an upcoming event using slides in Keynote and a picture slideshow in iPhoto. I'm planning on running it off my Powerbook to my 23" Cinema Display.
I'm using Keynote for the presentation content because of the motion effects (transitions, build-ins, etc.) and iPhoto for the image slideshow because of the Ken Burns effect (which I don't believe Keynote has). Both look great running seperately, however when this is being displayed at the show, I'll need both to run back to back automatically, without having to manually switch back and forth between applications.
I have both the Keynote presentation and the iPhoto slideshow displaying at 1920x1200. I've tried exporting the iPhoto slideshow to Quicktime, but it won't export any higher than 640x480. Does anyone have any ideas on how I can make this work? I won't be able to operate the computer when this is running, so I really need to find a way to make everything run seamlessly while keeping the high resolution of the 1920x1200 monitor.
Any advice would be GREATLY appreciated!
Thanks,
-Steve
PB 12" 1.5ghz Mac OS X (10.4.9)

iMovie is a DV editing app and the final results would still make a 640X480 file.
I would change a few things to make everything work together:
First is the display resolution. You want the 23 inches to be used so just reduce the display preferences to try and match your QuickTime file. 800X600 sounds about right but larger will still work as H.264 Video scales up in size very nicely.
This would force you to "reduce" the dimensions of the Keynote file but that shouldn't be much of an issue.
QuickTime Pro could also be used to "change" the dimensions of the 640X480 file. Again, H.264 scales up in size and would look pretty good at even double size.
The goal is to have them both at the same dimension and then match the monitor resolution.
Easier to change the display than the files.

How to put Titles in iPhoto slideshows

I truly love the slideshows I create in iPhoto with music...
"BUT", I'd also like to add a brief comment before, during or after the slideshow, and I've found this impossible to do.
Is Apple waiting for the new upgrade to address this problem?...
I've gone into my wordprocessor "Appleworks, and text-edit", hoping I could then export/import the titles into iPhoto, but to no avail...
I enjoy creating slideshows with music, then burning them, then playing them on stereo sound television, and its a total blast for me when I view my creations.
So, Apple, or readers on this site, please help a poor old man towards the path of enlightenment, for life can truly be beautiful with "titles"...
Thanks to all...
QuickSilver G4 933 Mac OS X (10.4.8)

Terence,
Don't know if you misunderstood my problem, but today, I found the solution to putting titles into iPhoto slideshows, and its pretty simple also.
I don't know how to enter a link here in order to include the directions on how to create titles in iPhoto..
But, briefly, create the title in any wordprocessor.
Take a screen shot.
Drag it into an iPhoto icon
Then, drag the icon into the iPhoto library.
Sal Pedi
Salvatore
We have no idea what enhancements - if any - are
planned for iPhoto. What you want to do cannnot be
done with iPhoto unless you use a third part editor
to create images with the comments, and import the
images into iPhoto and then incorporate them into
your slideshow. There are other apps that can caption
and use comments. Check out PhotoToMovie from
http://www.lqgraphics.com.
Regards
TD

Is it possible to play a slideshow in less than full screen mode

running 10.9.4, latest version of iPhoto. Is there any way I can play a slideshow at less than full screen mode? Like maybe half or quarter screen instead of having the app take over the entire screen? Very irritating. If I could run a slideshow as just one of several apps open on the desktop. Any way to do that?

The slideshow will play inside the iPhoto viewer pane and not in full screen mode, if you use the "Preview" button and not the "Play" button.

IPhoto slideshow to project on a screen

Similar Messages

Maybe you are looking for