IPhoto still won't make web pages using the comments field

I am someone who makes use of the comments field in iPhoto. I don't edit the title, because I thought it edited the photo file name (perhaps only in earlier iPhoto versions). Unfortunately, the Apple's tools for making a web page from iPhoto '08 seem to still use the title field only and not the comment field. That means that I have to edit all titles (to blank or a proper title) if I just want to show an annotation on just a few photos in a web page. At least the comments field defaults to blank, so I normally use it, along with the Better HTML plugin to make web pages, http://www.geeksrus.com/software/betterhtmlexport/
Now, the web pages produced by Apple are now as good as and even better than the BHTML templates, and I'd like to use them. But this problem with the comments means I can't quickly convert my old photo albums to something that makes nice web pages using my annotations with the iPhoto tools.
Does anybody know of any solutions to this problem? E.g. a script to copy the comments field to the title field?

I know what you mean. I can't believe that after so many versions of iPhoto that have supported publishing of some sort that such a basic and obvious feature still hasn't been implemented. It can't take that much effort to add. I'd rather have that than the new (and IMHO completely useless) "Events" feature. Speaking of which, does anyone know if there is a way to turn it off? It's annoying the heck outta me. I hate it.

Similar Messages

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

Can multiple web pages use the same cookie?

I have an applet that will reside in several different web pages. The applet creates a cookie that saves user preferences and loads them when the user next uses the applet. The problem is that I want the same cookie to load when the user views the same applet at a different IP Address. Is this possible? If so, how? I am currently using the netscape JSObject stuff to write and read my cookie.
Thanks,
Derek

Sorry, you cannot access cookie across domains.
If being able to access same cookie from different pages in the same domain satisfies you need, read on.
Let's suppose you have two html files kept on your server as follow::
MyHTML/main.html
MyHTML/subDir/A.html
Now, let say that when you save the cookie, the path is not specified. A.html will not be able to access the cookie set by main.html. However, if you specified PATH=/ (along with other values and expiry date-and-time), both html files will be able to access the same cookie via the document.getMember method.
This is more of a JavaScript question than a Java question and you might want to pay a visit to the link below:
http://forums.internet.com/WebX?[email protected]^[email protected]
you can go to the bottom of that page, click search and type in cookie and you'll see a lot of Q&A on the topic.
Good Luck
V.V.

Firefox won't load web pages all the way, what can I do to fix this

I have this problem where firefox won't load any webpages all the way and if I try refreshing the page it shows some of the webpage but not the whole thing....and now it won't load any images either. I have tried everything that i could think of and nothing works. I can't watch anything on youtube or go on facebook and google won't work either.

There seems to be something of a pattern in that those are all secure sites (HTTPS address). Have you noticed any certificate errors recently that you might have solved by adding an exception, or does everything seem normal otherwise?
Here are the usual things:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Issue Loading Specific Web Pages Using the Airport Extreme Base Station

I see that several other members have had this same issue - has anyone resolved their problem? Here is my issue:
It all started when my wife tried to load her favorite Web page at http://hpana.com - the site now takes well over 5 minutes to load. This started some time after updating the recent security update 2007-009 Version 1.0 and shortly thereafter version 1.1. I have tried using the other Mac computers in the house, using the same wireless network and the same problem presents itself. I have tried loading the page using friend’s computers (Mac and PC, from out side my home) and the page loads within seconds. I have tried using Safari, IE and Firefox (at home), the problem remains. I contacted the hpana.com Webmaster and they have made no changes to their web site.
I disconnected our cable modem, and connected the modem directly to the iMac (by passing the Apple Airport) and the page loads within seconds. I’m guessing it has something to do with the Airport Extreme.
So, I contacted Apple Support. The issue was quickly elevated and eventually forwarded to the Airport Extreme Hardware guys – I expect to get an answer by Mid January 2008.
I took a trip to the local Apple store and after explaining the situation, the store manger replaced the AirPort Extreme with the hope this would resolve the issue. After getting the “new” Airport Extreme up and running … the problem remained. This particular web site hpana.com still takes well over 5 minutes to load. I have no such issue with some of the other 60 or so sites I tried.
I by passed the “new” Airport once again by connecting the cable modem directly to the iMac and, as before the web page loads within seconds.
I’ll wait until I get a response from Apple come January, but I was wondering if anyone on the Forum would be willing to share their respective opinions.
Thank You and Happy Holidays.

Hi,
There are some differences between the configuration of Airport equipment sold in different countries, however this is likely to not be the cause of your system's issues. ( See this document for details on that - http://docs.info.apple.com/article.html?artnum=58567 )
Hong Kong has a very high density of population, especially compared to Australia.. I suspect your wifi signal is probably getting interference from your neighbours wifi, phones and microwaves. There's not much you can do about this, except getting an external antenna for the AEBS and trying to drown them out with it.

How to make web pages fit the screen width?

Some web pages don't fit the screen width and Firefox user (me) has to scroll horizontally, which is very annoying:
https://www.dropbox.com/s/kjyubp6f3z104ku/ScreenShot021.jpg
Opera user, on the other hand, just clicks on the "Fit to width" button and everything looks great again:
https://www.dropbox.com/s/hfsgl45f4d7uzgw/ScreenShot023.jpg
Is there a way to force web page text to wrap?

I get EXACTALY what "SantosHaHa" posted above. (Ffox 20 Win 7 64).
Zoom doesn't help. Make things bigger or smaller, BUT THE PAGE WIDTH IS STILL CROPED!
Have had this problem for 2 years and several versions.
NOTHING seems to work.
I wander why Ffox keeps changing versions so often, with so many new problems apearing, if Netscape worked fine 15 years ago!!!!

Won't open homepage on open, won't open web pages from the menu 'open new window', Can't open menu button

Ok, since update to version 31.0, I have been having some problems.
I have tried doing everything stated in the support page about resetting, reinstalling, safe mode, restarting pc etc.
First problem, when I open Firefox no web page loads. It just says New Tab and a blank white page. If I press the home button I am taken to my homepage which is google.
Second problem, when I right click on a link and the menu pops up, if I click open in new window, a new window opens but it just says New Tab with a blank page and no URL information, just blank.
Third problem, the Open Menu button just doesn't work at all. You can click all you like, that thing is not opening.
I am really stuck as to what to do. I have only been using Firefox for about a month and t was good until these problems. If I can't resolve it, I will have to use another browser as it is really annoying.
I am using Windows 8.1 by the way and have scanned my computer thouroughly for both virus's and malware.

Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Can it reach the internet?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Output a web page using the slice tool

I have an attached psd file. I want to create a web site. This is what I want to do, I want to click on "Home", and I want a web site to appear on the body or "slice 8", but whenever I click on "Home" the whole page is replaced by the link and the menu is gone. I guess, I'm doing something wrong. I hope you folks get my idea.
I really appreciate it, if you can look into my file and show me the way.
Thank you,

Is it possible to create frames on photoshop or I will do it manually using hard coding. I want to do something like this using the slices and the save for the web option. however, it always ends up in tables. so does photoshop support this or no.
<FRAMESET ROWS="15%,*">
   <FRAME SRC="tfetitle.html" NAME=TITLE SCROLLING=NO MARGINHEIGHT=1>
   <FRAMESET COLS="20%,*">
      <FRAME SRC="tfesidebar.html" NAME=SIDEBAR>
      <FRAME SRC="tfemain.html" NAME=MAIN>
   </FRAMESET>
<NOFRAMES>NOFRAMES stuff
</NOFRAMES>
</FRAMESET>

Since downloading #5 I can't scroll web pages using the up or down arrows - I immediately am sent to the bottom of the page rather than being able to scroll line by line

In addition I can not return to the top of the page by pressing "home". I have to resort to using the bar to control up and down movements. I tried to go back to an earlier version of firefox, but didn't seem to be able to access the older versions. Loved firefox but find myself moving more and more to chrome and to explorer.

You are probably in Caret Browsing mode. Tap F7 to toggle Caret Browsing on or off. Caret Browsing is an accessibility feature. See http://kb.mozillazine.org/Accessibility_features_of_Firefox#Allow_text_to_be_selected_with_the_keyboard
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I want to make a web page using labview.

I want to make a web page using labview. I have the internet tool kit. Where do I start. Till now all I have used labview is for industrial I/O and mmi. I have used various TCP UDP comms for network purposes, but I haven't ever done anything with Web page design.

The internet toolkit has some functions for generating and manipulating HTML, but it isn't really intended as a Web page authoring tool. I personally wouldn't use it for such a purpose, and I've done a good bit of Web programming in various different environments, including LabVIEW.
The true power of the internet toolkit lies in its ability to create LabVIEW VIs to handle CGI requests, the way that perl or PHP might be used in more traditional Web development. In the old days, this was really the only way to provide Web interactivity with LabVIEW on the back end. Here is a document that outlines how to start up the toolkit's Web server and check out the CGI examples that ship with LabVIEW. This is the best jumping-off point for creating your own pages, if you are planning to use the CGI functionality in the internet toolkit. Just examine how the HTML pages and the CGI VIs in the examples work together and begin to try out your own VIs.
Since LabVIEW 6i, LabVIEW has shipped with Remote Panel functionality that allows you to publish any LabVIEW VI in a Web browser without the burden of creating special CGI functionality. Furthermore, users can fully interact with the VI--buttons, graphs, string controls, etc. That's really a better solution if you want to make VIs available via the Web and aren't so much interested in CGI/transactional behavior. Check this out by choosing Tools >> Web Publishing Tool from LabVIEW.
I hope this info gives you some ideas about starting points for Web functionality in LabVIEW. Please follow up if you have more specific questions.
Best Regards,
John

NoSquint properly resized web pages, but the upper taskbars are still too large--for instance, I can only the beginning of the URL. How to fix?

After the latest Firefox version magnified everything, I used the NoSquint add-on (at 60%), which now makes web pages look as they did before. However, although the top two bars at the top of the screen are of normal size, the lower ones are still too large. The bar that contains the URL on the left and a Google search space on the right, for instance, can display only the first couple of letters of a URL (after the //).
How do I make these bars look the way they used to? Thanks.

Hi Anne, there is a setting in Firefox that controls the scaling of both the toolbar area and the content area. I'm guessing that you have your Windows font setting at 150%. In that case, I'm going to suggest you try to manually adjust the scaling in Firefox to 125% and then set NoSquint to 80%.
Here we go!
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''pix''' and pause while the list is filtered
(3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.25''' for the equivalent of 125% font size in Windows display settings.
If you view a tab with an address bar and this is not quite right you can adjust it to a different value, such as 1.2 (120%) or 1.3 (130%).
Please do not go lower than 1.0 or everything will start to get tiny.
Once that looks right, you can go back into your NoSquint settings and up your global zoom level for content to a comfortable number.
Can you get it the way you want?

Safari on iPad won't open web pages

Hi , my safari on my ipad won't load web pages when it try to open them from an email. They are common websites such as amazon or bbc... Ones that I use regularly until last week when the problem started.
Any suggestion on how to fix this would be welcome... Or I'll have to make an appointment to go to my nearest Apple store which is miles away.
Thanks

Try this:
Settings>Safari>Clear History, Cookies and Data

Resizing pixs for web page use

I have resized the photos to use on MS Frontpage but when the thumbnails are clicked on to be enlarged in the web page they are still too large. How do I make photos usable for web page use?

What version of Elements are you using? How are you now going about creating the thumbnails and larger images? What size are you making the large ones? I suspect all you need to do is change the width and height parameters to something smaller.

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

Need help to access a web page using midlet to retrieve some informations

Hi everyone i'm trying to access a web page using midlet to retrieve some informations in text format, the web page is [http://daviddurand.info/D228/?villes|http://daviddurand.info/D228/?villes] for my project.
the problem is that i always get error 10049 in socket::open meaning no adresse could be found i tried IP adresse and still the same.
i managed to recreate the same web page to test it on local and the surprise that it works fine but when accessing it online i have this error.
i tried also to get the page i created on a webserver i own to try it saying that there might be security issues but the same error appears again. so help plz
here is my code :
package mobileapplication5;
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class GetMidlet extends MIDlet {
private Display display;
String url = "http://dayaati.com/villes/index.php?villes";
public GetMidlet() {
display = Display.getDisplay(this);
public void startApp() {
try {
getBirthdayFromNameUsingGet(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
public void pauseApp() {   }
public void destroyApp(boolean unconditional) { }
public void getBirthdayFromNameUsingGet(String url) throws IOException {
          HttpConnection httpConn = null;
          InputStream is = null;
          OutputStream os = null;
          try {
httpConn = (HttpConnection)Connector.open(url);
httpConn.setRequestProperty("User-Agent", "Profile/MIDP-2.1 Configuration/CLDC-1.1");
httpConn.setRequestProperty("Content-Language", "en-US" );
httpConn.setRequestProperty("Content-Type", "text/html; charset=iso-8859-1");
httpConn.setRequestProperty( "Connection", "keep-alive" );
httpConn.setRequestProperty("Content-Length","51200");
          getConnectionInformation(httpConn);
          int respCode = httpConn.getResponseCode();
          if (respCode == httpConn.HTTP_OK) {
               StringBuffer sb = new StringBuffer();
               os = httpConn.openOutputStream();
               is = httpConn.openDataInputStream();
               int chr;
               while ((chr = is.read()) != -1)
               sb.append((char) chr);
               // Web Server just returns the birthday in mm/dd/yy format.
               System.out.println(sb.toString());
          else {
               System.out.println("Error in opening HTTP Connection. Error#" + respCode);
          } finally {
               if(is!= null)
               is.close();
               if(os != null)
                    os.close();
          if(httpConn != null)
                    httpConn.close();
void getConnectionInformation(HttpConnection hc) {
System.out.println("Request Method for this connection is " + hc.getRequestMethod());
System.out.println("URL in this connection is " + hc.getURL());
System.out.println("Protocol for this connection is " + hc.getProtocol());
System.out.println("This object is connected to " + hc.getHost() + " host");
System.out.println("HTTP Port in use is " + hc.getPort());
System.out.println("Query parameter in this request are " + hc.getQuery());
**Heeeeeeelp Please**

[http://java.sun.com/javase/6/webnotes/trouble/TSG-VM/html/crashes.html]
SIGSEGV (0xb)Most common cause of that is JNI code used directly or indirectly through a 3rd party library.
64-Bit Server VM (11.2-b01 mixed mode linux-amd64)Conversely that VM gets less traffic than others so you might have hit a bug in it.

IPhoto still won't make web pages using the comments field

Similar Messages

Maybe you are looking for