IPhoto stopped working on my iMac this morning after downloading some pictures from an SD card ( from canon EOS 1000D)

It worked perfect for 40000 photos till yet. I started the iMac again several times but no way. The iPhoto starts but then doesn't proceed.

Maybe this will help
http://support.apple.com/kb/HT2638

Similar Messages

When I touch the sift key a noise is made and sometimes it will capitalize my letter and sometimes it will capitalize all the letters. This just started happening this morning after upgrading last night.

When I try to use the sift key to capitalize a letter if makes a sift type noise. If I hold it down too long it makes the sift noise 3 times and then it doesn't capitalize but leaves the letter in lower form, ex: i instead of I. This just started this morning after downloading mountain lion last night. I had snow leopard previously. How do I turn this off?

Take your MBP to your local AS or AASP. Diagnostic testing is FREE! However, the repairs will be your responsibility as Apple warranty does not cover accidental damage. If you do decide to get your MBP repaired, send the bill to your ex-boyfriend.
My mom thinks that it's my fault somehow because it got kicked off my bed a long time ago, but other then that I haven't done anything to it.
Mom is always right!

Iphoto stopped working when trying to export to facebook. iphoto is froze open with flip down for exporting. Neither will respond. Any ideas on how to fix this?

iphoto stopped working when trying to export pictures to facebook - iphoto page and export flip down froze open - cannot do anything with them - any idea what's wrong or what I can do to fix this?

Force Quit iPhoto (Use Force Quit under the Apple Symbol in the upper left of this page). If you continue to have problems please re-post in the iPhoto's forum, it's located at:
https://discussions.apple.com/community/ilife/iphoto

After i update the 10.10.2 OS X Yosemite my iPhoto stops working. In the warning that appears when I try to open the app says that happened a mistake because of this update. I reinstalled the app but doesn't work anyway. Please, HELP!

after i update the 10.10.2 OS X Yosemite my iPhoto stops working. In the warning that appears when I try to open the app says that happened a mistake because of this update. I reinstalled the app but doesn't work anyway. Please, HELP!

I already tried that but it doesn't work. Appears a warning saying: "See the developer to make sure that iPhoto works with this version of OS X. You may need to reinstall the application. Be sure to install all available updates in the application and OS X."

My G RAID thunderbolt drive mounted just fine onto my iMac this morning. And now it will not mount despite my various efforts. I don't know what else to do. Can someone help me with this?

My G RAID thunderbolt drive mounted just fine onto my iMac this morning. I copied some files from another drive onto the RAID drive, ejected it, and worked on another project for a few hours. When I went to mount the RAID drive again so I could work on the project associated with the drive (I'm a freelance video editor) it would not mount. I've tried everything. It boots up perfectly fine, the drive seems to have no hardware problems. It shows up on Disk Utility and in System Information but is listed as not mounted. I've verified it on Disk Utility and it tells me everything with the drive is fine. I've tried all the various restarting my iMac, ejecting and reconnecting the drive, shutting down the whole system and starting it back up, relaunching Finder, and nothing works. Starting to panic because this is a client's drive, I have no idea what the issue is, it worked perfectly fine only hours ago, nothing happened to it in the meantime, and I fear continuously connecting and ejecting it because I don't know what the state is with the data and if this is only going to further aggravate the problem. I've been up and down Apple and g-raid forums and can't get a straight answer anywhere. I need to know that the data is safe, the drive is undamaged, and how to get it to mount on my iMac. Can anyone out there help me with this??

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Upgraded to OS X 10.9 and Slideshow in iPhoto stopped working (stays on first slide; will not advance)

Upgraded to OS X 10.9 and Slideshow in iPhoto stopped working (stays on first slide; will not advance)

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 to reapair permissions if #4 doesn't help.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If still not working log into another user account on your Mac and try a slideshow from there. If it works there then the problem is limited to your account. If it fails there it's system wide and may require a reinstall of iPhoto or the system.

My keyboard has stopped working on my iMac I bought a new keyboard and still not working any ideas?

MY keyboard has stopped working on my iMac I bought a brand new one and the keys work but the volume buttons do not operate the volume I've changed it twice now and the same thing is still happening

What is the make & model number of the keyboard?
You could get a keyboard remapping program & map someother key to the volumn key.
There is a list of them in this thread.
https://discussions.apple.com/message/13208090?messageID=13208090#13208090?messa geID=13208090
Robert

Safari has suddenly stopped working on my iMac. I can access it on my iphone and ipad.

Safari has stopped working on my iMac. The error message says: "Safaru quit unexpectedly. Click reopen to open the appication again." When I click reopen, nothing happens.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

My outlook stopped working on my imac but works on iphone, can anyone help?

Hi,
My outlook stopped working on my imac but works on iphone, can anyone help?
This seems to happen periodically.
Thanks,
Justin

Sorry meant my Mail has stopped working on my iMac. It had large items in the Outbox from last weekend. I guess it just got its knickers in a twist as I deleted the large emails, containing video and now it is working again.
Thanks for coming back to me tho. Appreciated.

Iphoto stopped working. I reinstalled and updated. I still can't open it.

iphoto stopped working. I couldn't open it. I checked that photos were backed up. Trashed iphoto. Installed iphoto 11 and installed update. I still can't open it. I get no error messages. The wheel just keeps spinning.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Iphoto stopped working,all i get now is spinning beach ball of death.help!

iphoto stopped working,all i get know is spinning beach ball of death.please help.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

My iphoto stop working

My iphoto stop working. And it gave me this meesenger Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup. I already shut down and restart the computer and still the same.

And the rest?

Why my iphoto stop working kept downloading nothing happening

why my iphoto stop working kept downloading nothing happening

Because it's broken?
Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

I can no longer send or respond to email from my Firefox browser. I closed and sent from Internet explorer and it works fine. What changed? The only thing different this morning, I downloaded Adobe uprade?

Question
I can no longer send or respond to email from my Firefox browser. I closed and sent from Internet explorer and it works fine. What changed? The only thing different this morning, I downloaded Adobe uprade?

I had this hotmail issue myself a while back. I Googled, scanned MS website, scanned MSN website, visited forums, couldn't figure it out. I tried Firefox and Opera and even changed the Opera mask setting from Opera to Internet Explorer. Nothing worked. My best guess was that I was signing on (with the new MSN Live as opposed to MSN Hotmail - the OLD interface) with the "Remember me on this computer?" box checked. I now make sure it is un-checked (which is not the default) and hotmail lets me in.
Not exactly sure if that is the real remedy, but thot I'd throw the story your way just in case...

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

IPhoto stopped working on my iMac this morning after downloading some pictures from an SD card ( from canon EOS 1000D)

Similar Messages

Maybe you are looking for