Iphoto Stream does not take in concideration the time zone. How to add a certain amount of hours on a Stream automaticly downloaded into Iphoto?
Hi,
I am just back from my holidays with few friends... We were in a Time Zone +6. I have created a Photo stream for everyone to share their photo on the same place. It worked. Back @ my place, I downloaded those photos localy on my laptop to be able to close the Stream. Those picts has the perfect time. In the same time I got all my picts that are automaticly streamed into Iphoto as well ... Here is my problem : I want to had the Picture that I have not streamed into the commun stream to my local event (from my own automatic stream) ... Those have been uploaded with my laptop local time !!! So I have 6 hours difference ! ...
Is there a way to add 6 hours to all my pictures or should I import manualy my pictures from my phone to Iphoto ? (Picts are Ok into my phone).
It is kind of an hugly bug: I think that this streaming option is actully really useful when you are in holidays ... so kind of often in an other time zone !
Thx for the support !
You e missing somthing - the adjust time and date command is specfially designed to corect tim fo camera mis-settings or time zone - you selec a roup of photo off by a certain amount and it adds the same delta to all thereby quickly an dsimply correcing user camera setting errors or user time zone errors
It does exactly what you ask for - the batch change command does not work for this by=ut the adjust time command does
LN
Similar Messages
-
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
-
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
Re: Satellite Pro A300 - DVD drawer does not open most of the time
I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button? -
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?
Perhaps someone on this forum has done what you are asking and would be more help than me.
I think it could be done, but you'd have to do some fiddling around. The concept is to make the iDVD theme part of your iDVD or iMovie created slideshow, so that it will play as part of the slideshow.
I don't know if this will work, but if I were experimenting I would try creating an iDVD project with just the theme in it, and then save that to your desktop as a disc image. When you click on the icon of the disc image you have just created, you will see a Video_TS folder. Open that and you will see a file containing the letters VOB. Open that file.
You need to convert that VOB file back to DV or Quicktime Movie which iMovie is designed to handle. For that you need the free download MPEG Streamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/, which I believe costs about $20.
Open MPEG Streamclip and drag the VOB file to its window. Go to the MPEG Streamclip file menu and click on Export to DV.
After the export is done, you will have a DV file containing the iDVD theme. I would try adding that clip as your first entry in your slide show, assuming that you are running iDVD7. (You can't add a movie to a slideshow in iDVD6.) When you play your slideshow hopefully it will play the DV clip containing the theme, then seamlessly followed by your slide show. If it doesn't, try instead exporting the VOB file to a Quicktime Movie, and then try to add the Quicktime movie to your slideshow.
You might be able to do this easier if you created your slideshow in iMovie instead of iDVD. You could make an iMovie with the iDVD theme clip as the lead clip, and then share your iMovie project to iDVD.
Good luck with this. As I said, perhaps someone else has an easier way to do this and will chime in. -
Which variables will not take part at the time of object seralization
could any body tell me which variables will not take part at the time of object seralization
-transient
-non serializable class (basic class like String is ok) -
i have a iphone 5. the volume button going down only does not work. this is my second phone with the same problem. i have had otterboxes for both phones.
Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.
-
Computer 1 setup with code.
When I follow instructions on computer 2 and select I already have account it give me set of codes to enter on first computer at :add device screen. Does not give me option option to add email address and password but tells me to enter a code they supple to add a device screen on first computer. When i go there it doesn't give me this optionHi!
I understand that Computer 1 is synced and you see something like this when you access the Sync Tab under Preferences: https://support.mozilla.com/media/uploads/gallery/images/2011-01-27-15-46-25-9c0352.png
And in Computer 2 you get a window similar to this: https://support.mozilla.com/media/uploads/gallery/images/compcode.jpg
But when you click on Add Device the following window doesn't appear: https://support.mozilla.com/media/uploads/gallery/images/2011-01-27-15-46-48-5f59d1.png
Is this correct? If so, please let me know what you see (a screenshot will be handy).
You can also set up the second computer following this instructions: https://support.mozilla.com/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer -
Sound does not work correctly all the time, on youtube.
So I have been having this issue for a while now, and I have tried everything to fix it on my own.
My issue is sometimes you-tube videos will play about 1-2 sec of sound then stop, the video will buff all the way out and I can watch it but no sound will come from it. Once it happens if I try to watch another video they will all have no sound, but if i start up itunes it will still play music, so it's not my PC.
Once I close Firefox and reopen it 80% of the time it will play sound on the same video, the other 20% of times it will play 1-2secoinds of sound again and quit playing sound, if I restart fire fox again it will play just fine. Also I do not seem to get this issue with internet explore.
Stuff I have done.
Check for updates for my video/sound cards.
Uninstalled/installed flash 3 times even downloads the Adobe Flash player uninstaller, then reinstalled flash again.
Unchecked enable hardware acceleration, in the Adobe Flash setting.
My setup
Firefox 3.6.13
Windows 7 64bit
ATI HD radeon HD 4350 video card.
I have my PC connected to my TV, sound/video is carried with a HDMI cable from my video card.Did you check the settings for Firefox in the Volume Mixer?
See also:
* [[No sound in Firefox]]
* [[Video or audio does not play]]
* http://kb.mozillazine.org/Video_or_audio_does_not_play
You can also try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
See also Flash Local storage settings:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html -
When I click on Firefox to open the browser window nearly 1/2 of the time it never opens. It shows that it is trying to open and then it does not. No matter how many times I click on it it will not open unless I reboot my computer.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Check for crash reports;
In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in. -
ADF Faces selectOneChoice does not raise valueChangeEvent all the time
When using the following code in my JSF page:
<af:selectOneChoice id="yearChoice" autoSubmit="true" value="#{selectedDate.startingYear}" binding="#{selectedDate.yearChoice}" required="yes" valueChangeListener="#{selectedDate.valueChanged}">
<f:selectItem itemLabel="2005" itemValue="2005" />
<f:selectItem itemLabel="2006" itemValue="2006" />
<f:selectItem itemLabel="2007" itemValue="2007" />
<f:selectItem itemLabel="2008" itemValue="2008" />
<f:selectItem itemLabel="2009" itemValue="2009" />
</af:selectOneChoice>
The valueChangeEvent is fired most all of the time, but when you change the choice back to whatever the original was set to, it does not fire. It only fires when you choose something other than the original selection. Even after selecting other values.
Any help would be greatly appreciated.Set "immediate" to false on all of the showDetailItems inside the showOneTab. It currently defaults to true (unlike all other uses of "immediate"); we may revisit that decision shortly.
-
Spotlight search (search iphone) does note work half of the time.
When searching my iphone4s nothing show up half the time. (spotlight search) Sometimes it works fine and other times I type and it does not search or show anything. Powering down the phone did not fix. Just odd it works for a minute then seems to stop completly. No other problems besides this one.
OK, well at least it works 50% of the time.
-
its a small problem, but is very annoying -_-
Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Hi there,
we just switched from OSX 10.5.8 to 10.6.8
OSX was installed on a new partition of the harddisk
Then installed CS 5
Then installed CS 6 via (adobe creative cloud)
With CS6 we got also the problem with saving files to the server (program error)
It happens mostly with photoshop, sometimes with Illustrator.
I read a lot of posting regarding the same problem but didn´t found a real solution yet.
I am also wondering that there seems to be no solution for this now, because most of the posting i read are 1 year old.
Working locally is not really an acceptable workaround for us or anyone who needs to work with Creative Suite in a professional way.
Our MACs…
MAC Pro 4.1
OSX 10.6.8
Virtualized Server Solaris 10 with Helios UB+
connected to server with afp://Server IP Adress
Adobe Software
CS 5 & CS 6
Here´s some additional information from the osx system profiler:
Hardware-Übersicht:
Modellname: Mac Pro
Modell-Identifizierung: MacPro4,1
Prozessortyp: Quad-Core Intel Xeon
Prozessorgeschwindigkeit: 2,26 GHz
Anzahl der Prozessoren: 2
Gesamtzahl der Kerne: 8
L2-Cache (pro Kern): 256 KB
L3-Cache (pro Prozessor): 8 MB
Speicher: 10 GB
Geschwindigkeit für Prozessorverbindungstyp: 5.86 GT/s
Boot-ROM-Version: MP41.0081.B07
SMC-Version (System): 1.39f5
SMC-Version (Prozessormodul): 1.39f5
Seriennummer (System): CK9120Z98Q0
Seriennummer (Prozessormodul): J590807P51LUC
Hardware-UUID: 30149BDB-582E-583A-B776-59A6DEA2A32C
Ethernet 1:
Typ: Ethernet
Hardware: Ethernet
BSD-Gerätename: en0
IPv4-Adressen: 192.9.200.120
IPv4:
Adressen: 192.9.200.120
Konfigurationsmethode: Manuell
Schnittstellen-Name: en0
Netzwerksignatur: IPv4.Router=192.9.200.203;IPv4.RouterHardwareAddress=00:30:48:ba:70:30
Router: 192.9.200.203
Teilnetzmasken: 255.255.255.0
DNS:
Such-Domains: floramedia.int
Serveradressen: 192.9.200.7, 194.25.0.68
Ethernet:
MAC-Adresse: 00:23:df:df:96:e1
Medienoptionen: Voll-Duplex
Medien-Untertyp: 1000baseT
Proxies:
Ausnahmeliste: *.local, 169.254/16
Passiver FTP-Modus: Ja
Reihenfolge der Dienste: 0
Überblick über die Systemsoftware:
Systemversion: Mac OS X 10.6.8 (10K549)
Kernel-Version: Darwin 10.8.0
Startvolume: MAC_OSX_10_6_x_SNOW-LEOPARD
Startmodus: Normal
Gerätename: Freelancers Mac Pro 10.6.8
Benutzername: DENNIS (freelancer)
Sicherer virtueller Speicher: Nicht aktiviert
64-Bit-Kernel and -Erweiterungen: Nein
Zeit seit dem Start: 8:09Hi franverdi-
It sounds like you've run into issues from the upgrade. I've found a Support article that helps with issues of not being able to connect after an upgrade:
[[Cannot connect after upgrading Firefox]]
I hope that helps!
Maybe you are looking for
-
Whatsapp para iPhone 3G não funciona mais
Whatsapp para iPhone 3G não funciona mais! Eu pedi uma ajuda no suporte do aplicativo e tive a seguinte resposta: Olá, Obrigado por entrar em contato conosco! Para que você possa conectar ao WhatsApp, ou ativar o seu número, você precisará ter a últi
-
ABAP program to change SD sales order originally created on CRM
Hello all! Please, I would like to ask you some wisdom about this question: I need to use a BAPI (BAPI_SALESORDER_CHANGE) or a call transaction (to t-code 'VA02') to modify in the R/3 system (v. 4.7) a sales order that was originally created in the C
-
BPM - Interact with external system
Hi Experts, We are implementing a project with BPM Suite Version 1.1.1.6 (PS5). A requirement is the following things: - The BPM process begins through a human task. - Upon completion of the human task, the flow must interact asynchronously with
-
I recently reinstalled Acrobat 8.1 after a crash. I wanted to check for updates but encountered the message that no internet connection was found, to check the internet settings or the firewall. There are no issues with either. Obviously, I have a
-
Video "pops" after quicktime export
exported my sequence (apple pro res 422 1280x720 59.94) as a straight quicktime movie export using current settings and make movie self contained. when i play the quicktime, there are "pops" - the picture jumps either forward at a fade up from black