IPhoto synching to iphone no longer works

I upgraded to IOS5 and the new iPhoto update but now my phone does not synch to iPhoto.
Does it have something to do with iCloud? 
1.  My iCloud is not activated because the Apple ID in iCloud is wrong.  Instead they have an email alias in there but I don't know how to change that. 
2.  I am also still using Snow Leopard because I am using a Power PC OS10 Cad program that would break in Lion.
Are items 1 and 2 causes for iPhoto no longer to synch now that I have updated iPhone to IOS5 and iPhoto?
Thanks,
Robphoton

Have you set the vehicle's headunit to forget the iPhone?
Once you do, try to pair to the vehicle as if this was a brand new device.  Make the iPhone discoverable and place the headunit into pairing mode.

Similar Messages

  • The sound on my iphone no longer works, nor do the buttons at the side that turn sound on and off/volume control. But weirdly, you can play music without headphones. Tried restore and jack in and out. No luck... any ideas?

    The sound on/off  button onthe side of my iPhone no longer works, nor do the volume buttons. All sound has disappeared from the phone apart from the Music which still plays. Have tried th Restore and restart phone plus have plugged and unplugged phone jack. No luck  - any idea anyone?

    One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone.  I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner.  An Apple employee told me that the pins on the phone had a little corrosion and sand.  The problem hasn't gone away completely, but has been significantly reduced.  I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

  • My iPhone no longer works with my wi-fi network.  It detects the network but can't communicate, even though it did so until today for months.

    My iPhone no longer works with my wi-fi network.  It detects the network but is unable to communicate, even though until today it worked great for months.  The network is Verizon FiOS Internet on an M1424WR router.  PCs and iPad continue to work with the same network without any problem.  Any ideas?

    have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

  • Iphone no longer works in my suburban?

    after update...iphone no longer works with my infotainment system in my suburban.  Any ideas?

    Have you set the vehicle's headunit to forget the iPhone?
    Once you do, try to pair to the vehicle as if this was a brand new device.  Make the iPhone discoverable and place the headunit into pairing mode.

  • 2G iPhone no longer works as an iPod

    I upgraded to the 3G iPhone a few weeks ago and have been using my old 2G iPhone as an iPod touch via WiFi. The 2G phone crashed last night, and after a restore it longer longer works as an iPod. All I get is the Connect to iTunes screen. If I connect to iTunes, it starts the new activation process. I assume this will transfer my service back to my old iPhone. What can I do to get the iPod functionality back?

    Reactivate using your number sync the songs then put it into airplane mode so att cant relock it! Then just put the sim in the 3g again and your good!

  • My iPhone no longer works with external speakers

    Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
    If anyone could help, I'd greatly appreciate it

    OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

  • Pressing "Today" on iPhone no longer working in Calendar List view...?!

    Using iPhone 3GS v3.1.2 with MobileMe.
    Up until a couple of days ago, the iPhone Calendar was working fine.
    Now, however, when I press Today in >list< view it takes me to >yesterday's< calendar items. (Today button works fine in Day and Month views)
    Erasing the iPhone's calendars and re-syncing to MobileMe has not helped... Neither has rebooting or force-resetting the iPhone.
    Anyone else had this problem?? It's really annoying.
    Thanks!
    .../j

    It seems to have resolved (for now). Not sure which step fixed the problem...
    Contacted MobileMe support about Calendar sync'ing not working reliably between iPhone and iMac, and the Calendar not appearing on me.com ("Calendar currently not available").
    It appears that they then reset the MobileMe syncing for my account at their end. Logged out of me.com, logged back in, and the problems were solved.
    At least this is something that others can try if they have this same problem--can't guarantee that this particular step is the one that fixed it because I was trying lots of things in succession.
    .../j

  • IPhone no longer works with car audio

    I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
    The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
    I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
    Any thoughts or help is greatly appreciated!

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • Sync iCloud-enabled iPhone no longer works with iTunes

    Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
    Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
    At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
    No way to syn music, videos, movies to any of the devices ever since.
    Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • IPhone no longer works after iOS 5.0.1 update

    My iPhone 4 no longer recognizes its SIM card after updating from iOS 5.0 to 5.0.1.
    I followed the instructions in the article on the official Apple support site. Removing and reinserting the SIM card did not help, so I used iTunes to reset the iPhone.
    The result is that after switching on, the iPhone tells me that there is no SIM card in the slot (even if there there is) and that I should insert a SIM card with no PIN lock into the slot.
    I do not have a SIM card with no PIN lock.
    My phone company only distributes SIM cards with a PIN lock.
    What can I do now?

    I had this issue too. I did an OTA update.
    I tried turning off my iPhone, removed and reinserted my SIM and turning it on again a few times without success. I also inserted my wife's SIM, it was OK. When I tried with mine again, it was not. I also tried going in and out of Airplane Mode too without success.
    Afte a bit of trial and error, I finally got it to work.
    What I did was:
    1. Turn off WIFI.
    2. Turn off my iPhone.
    3. Removed and reinserted my SIM.
    4. Turned on my iPhone. Almost immediately I saw the  "3G" indicator and after a couple of seconds, my SIM worked!
    5. Turned WIFI back on.
    From my issue, it seems the iOS 5.0.1 update got "confused" with the network setup.
    HIH.
    Andrew

  • IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

    I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
    Thanks.

    Nevermind. Did a hard reset of each and they work now. Odd...

  • After upgrading to Yosemite and iPhoto 9.6, cropping no longer works.

    In iPhoto I can crop the image, but when I export it I get the full image, no crop. I use the cropping feature all the time. Please help!

    it has now stopped working (in my original iPhoto library. It still works in the Test library).
    That says your original library is the culprit so do the following with it:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.

  • IPhone No Longer Works with JBL Onstage III

    Is anyone experiencing a similar issue after upgrading your iPhone 1st generation to 2.1? Now, when I pop my phone into the JBL Onstage III, it gives me the prompt that it's not a compatible device, and would I like to put it in airport mode. It's also not charging all the time, and seems to take a few second to even recognize it's plugged in.
    Is it my phone, or is the JBL speaker system dying on me?
    Thanks,
    Chris

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • Itunes & Iphone no longer working correctly following 9.2 upgrade

    I downloaded and installed 9.2 upgrade though Windows came up with an error about Windows Logo. Itunes no longer loads at all and I get the following error message:
    Quicktime failed to initialise (error -2096)
    Quicktime is require to run Itunes. Please uninstall Itunes, then install Itunes again.
    I've done this and uninstalled and reinstalled Quicktime again.
    My iphone is no longer picked up by my computer when I try to sync.
    What a mess. Any ideas people on what I can try next apart from buy a Mac?

    Please sign out of iMessage and sign back in. Test.

  • The Remote App on my iPhone no longer works with my Apple TV 1st Gen

    I don't use it that often but when I want to, I want to...u know how it goes. Since one of the updates for the Remote app on the iPhone it no longer "sees" my 1st gen Apple TV, any ideas or am I SOL? Apple TV 1st gen doesn't do homesharing does it?

    there used to be a dark gray "pad" area on the display of my phone in the remote app that I could use kinda like a track pad to move around the menus on the appletv, u could tap it, swipe it etc, that's gone cause it no longer sees my apple tv library, I can't find the library on the apple tv, is that cause homesharing isn't available and it only sees things thru homesharing?

Maybe you are looking for

  • I need to backup all the music on my nano - my library is a mess with all my kids music

    I am sending in my 1st generation ipod nano for battery replacement. I need to back up all the music on my nano. My library is a huge mess with all of my kids music.  How do I just get everything on my nano in a playlist without getting mixed in the

  • Acrobat 9 Pro and SMS 2003

    I am trying to use the document below to install 9 to users. However, when I use the documentation that is provided, it does not put the Adobe icon on the desktop. It is a generic windows icon. When I actually run the program it appears fine. Creatin

  • Mapping TOOL to IDL

    Anyone, Here's the situation: I have a Library that was generated when I imported a .pex file(that was created from the idl) into the Forte env. This Lib has Structs, Structs of Structs (sequence of structures) and a control class. In the control cla

  • Errors wih E71 and Bluetooth Speakerphone in Skoda...

    I have a Skoda Fabia II with a manufaturer built-in speakerphone. It worked well when connectetd with bluetooth to a Nokia 6288. Now I have an E71 and get following errors: 1.)The phonebook displayed in the car is ordered by firstname, surname instea

  • Resetting Administrator Info

    I'm in need of some help. I was given a G5 computer as a gift a couple years back. Now I would like to update the system but I have no idea what the administrator name or password is since I was never given that information. So I was trying to use th