Iphoto update 9.1.2. not working with Appstore

In the Appstore on the purchased Tab, there is an info that there is an update for iphoto available.
If i click the update button, I got the message "Es sind keine Updates für andere Accounts verfügbar" (translated into english: "updates for other account available"). But I do not have another account.
So what's going wrong here?

One for the App Store forum I would think.
Regards
TD

Similar Messages

  • CS3 Updates cause programs to not work with Windows 7?

    Has anyone else had their programs stop working after an Adobe update was installed?  Although I have been told by 5 different Adobe staff members that CS3 is "not at all compatible" with Windows 7...it somehow worked on two machines for 6 months.  Then a recent Adobe update caused it to not work.  I could understand if it never worked with Windows 7, but it stopped working after Adobe's update.  I am sure that Adobe has the resources to test their updates on Windows 7 machines and would have found this problem.  What would make them proceed with giving their customers this update...hmmm maybe the release of CS5???
    I also asked if they could send me a CD (since I chose a download) of the original CS3 suite without the updates and they told me that they don't have any.  Really??? Adobe doesn't have any copies of a program that is only 3 years old?

    Try this page to download a copy of the original...

  • The "Adobe Reader 11.0.08 security update - All languages" is not working with "Adobe Reader 11.0 - Multilingual (MUI) installer" using msiexec when creating an msi package. is there going to be a release of Adobe Reader 11.0.08 update - Multilingual (MUI

    Is it possible to create an msi package if the product you are upgrading is Multilingual (MUI) and the update(msp) you are applying is not Multilingual (MUI) but "All languages"?

    Please download the latest Adobe Reader patch from the below mentioned location, it will work with MUI installer.
    ftp://ftp.adobe.com/pub/adobe/reader/
    ~Deepak

  • IPad has update software but will not work with iMac with updated software

    I have the iPad running the 5.1.1 and when the iPad is plugged into the wife's new iMac running iTunes 10.6 I get a message
    The iPad “Ase’s iPad” cannot be used because it requires iTunes version 10.5 or later. Go to www.itunes.com to download the latest version of iTunes.
    I check the iTunes and it's at 10.6, and iTunes will not even recognize the iPad under devices.
    Again while plugging in the wife's iPhone you get the following:
    The iPhone “iPhone” cannot be used because it requires iTunes version 10.5 or later. Go to www.itunes.com to download the latest version of iTunes.
    Again the iTunes is at 10.6
    Any help with this?  Do I remove the iTunes completely?
    Shouldn't be this hard.

    Locate the iTunes app in Applications folder, highlight it and type Command I (I as in Ivan) and look to see what version is installed. If it's still 10.4 then navigate to
    http://support.apple.com/kb/DL1426?viewlocale=en_US&locale=en_US
    Then download and install following the on-screen directions. Once it installed it wouldn't hurt to restart in Safe Mode, this will clear some caches, it's possible one or more is corrupt.

  • Library Update Fails, Itunes will not work with new 9.0 update

    I just recently updated the Itunes software.
    Since doing it, when I plug my Ipod 180 gig into my computer, or just try to open Itunes, the Library starts to update
    I can do nothing else and then when it finishes, it fails.
    Itunes closes and I am back to square one.
    WHY?!?!?!
    It was fine before I updated. Everything was running smooth.
    This new update is messed up!!
    What do I need to do to fix this issue??
    Elwood

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
    Which version of iPhoto?
    If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder  (don't empty the Trash) and download iPhoto again from the Purchased tab.
    If that does not work, contact The App Store Support  from the Quick Links on the AppStore main page.
    Only apple Support can fix problems with apple ID.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • Default Mail app not working with yahoo mail. Won't update.

    Default Maill app not working with Yahoo Mail.
    It stopped working the other day. I tried everything but it wouldn't update new mail. The yahoo account itself is fine because I can see new mail on Yahoo or a yahoo app.
    I tried deleting the account and putting it back on, but now it has 0 mail in any part of it. Nothing has synced.
    What do I do?
    iPad 2 latest OS.

    A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
    https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
    https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
    On the iPhone, tap Settings.
    Tap Mail, Contacts, Calendars.
    Tap your Yahoo account, then delete it.
    Tap Add Account.
    Tap Other.
    Tap Add Mail Account.
    Complete the Name, Address (email address), Password and Description fields.
    Click Next.
    Ensure IMAP is selected.
    Enter the following incoming mail server information:
    Incoming Mail (IMAP) Server - Requires SSL
    Server: imap.mail.yahoo.com
    Port: 993
    Requires SSL: Yes
    Hostname is mail.yahoo.com.
    Username is your full email address
    Password is the same password used to access webmail.
    Enter the following outgoing mail server information:
    Outgoing Mail (SMTP) Server - Requires SSL
    Server: smtp.mail.yahoo.com
    Port: 465 or 587
    Requires SSL: Yes
    Requires authentication: Yes
    Username is your full email address
    Password is the same password used to access webmail. It may have been entered for you.
    Tap Next.
    The iPhone will establish an SSL connection to your IMAP and SMTP servers.
    That’s all!

  • DVD player does not work with latest update

    I installed the latest update 10.8.2 and now my brand new Superdrive will not work with new MacBook Pro Retina display.  When I plug in Superdrive and try to start a DVD, it say "DVD quit unexpectedly......"   Took to Apple store and they said it was latest update.  Anyone else with this problem?

    Dear all,
    Perhaps you found out yourselves but the latest Software Update, called OS X Mountain Lion 10.8.2 Supplemental Update, solves this issue. I recommend you install it and restart your Mac.
    When you insert a DVD in the drive and DVD Player launches, you will be prompted to confirm the region encoding (1, 2, 3, 4 or 5, based on the encoding of the DVD you are about to play). This is normal, and you should confirm it again, even if you did it previously.
    Naturally, if most of your DVDs are encoded for one region and you want to play a disc encoded for another region, please remember you may make a limited number of region changes when you play other DVDs, and the last one will be permanent. So, act with caution and sensibility.
    Alessandro

  • Java 7 Update 11 Not Working with Firefox

    For me, the problems described in the thread "Java 7 Update 10 Not Working with Firefox? " Java 7 Update 10 Not Working with Firefox?
    are continuing with Java 7 Update 11.
    Windows 7 64 bit
    Firefox 18
    The problem is that "Java(TM) Platform" is missing from the plug-in list.
    I've uninstalled Java 7 Update 11 and reinstalled Java Update 9 which correctly installs the plugin and restores Java functionality which was broken immediately upon installing both Java 10 & 11.

    981243 wrote:
    So why not using Ju11 ? You can workaround the issue. It would sucks but still be safer than using Ju9.
    Also ask Mozilla forums if Firefox has options where to search for plugins.
    Or try 64-bit Firefox.As I explained in both threads ...
    Java 7 Update 10 Not Working with Firefox?
    Java 7 Update 11 Not Working with Firefox
    ... neither jre7u10 nor jre7u11 are working ... and they are BOTH broken with the same problem ... "Java(TM) Platform" pliugin is missing from the plug-in list. It cannot be enabled, because it simply is NOT there. A suggestion was made the jre7u12 will be the "fix" for this issue ... so I installed the Update 12 Preview and it sis ALSO broken, no "Java(TM) Platform" in the plug-in list.
    The ONLY Java version that actually works for me is jre7u9.
    As far as installing Firefox 64bit ... I see no future in installing a browser that has been discontinued.
    http://www.computerworld.com/s/article/9233976/Mozilla_suspends_work_on_64_bit_Firefox_for_Windows
    Even though Mozilla relented due to backlash, I continued development will be a somewhat low priority.
    http://www.computerworld.com/s/article/9234997/Mozilla_compromises_on_x64_Firefox_after_user_backlash

Maybe you are looking for

  • Afraid of system being compromised - newbie in "security"

    Hello, PART 1: There are two computers. Computer A uses openSuse and it is usually used for common tasks (not risk at all), suddenly, one day some "bookmarks" from Mozilla Firefox were modified but not by the legitimate users. The firewall rules were

  • Dashcode: How do I get the name of an image in a website?

    I'm making a widget that gets the filename of an image on a website and it changes the value of some parts of the widget if the filename has a certain name. The only problem is that I don't know how to get the name of this image in the widget. Could

  • How to create a "speed bump" page warning "you are leaving this site"

    I do alot of banking sites. Due to complaince issues, they are required to include a warning before being sent to an outside website. Is there any way to do this using Dreamweaver... maybe behaviors? They simply need to have a warning statment, with

  • How to decrease the latency with flash+http+camera video?

    I build a HTTP server between live camera and flash player. The flash player connect http server with NetStream. But i find there is a long latency and NetStream doesn't decode frames when the buffersize reach a special value. So i want to know, how

  • Really Messed up iPod

    The last time my iPod was working I had plugged it into my computer and used iPod Update to update the software. I recently tried to turn it on and it wouldn't turn on. It will not reset using menu-select. When I plug it into my computer the screen l