Iphoto upgrade hangs

I just restored a new 27" iMac from a 24" iMac. All went fine except for iPhoto. It tells me I need to update my library and then hangs at the very end of the update progress bar. Any ideas?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Similar Messages

IPhoto upgrade hanging

I upgraded my iPhoto 09 to iPhoto 2001 via the App Store. It loaded fine and I spent a few hours pottering around with my photos. Today I tried to open it and all I get is the screen with no images and the spinning ball. I tried opening holding down the control & command key then tried rebuilding - without success, I deleted the plist - no change, I deleted the cache - no change. Any ideas anyone?

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

IPhoto Library upgrade hangs

upgraded to OS X Yosemity on my 2008 iMac (previously on Maverickx); Also upgraded to iPhoto 9.6. Was told to upgrade the iPhoto library for which I followed the instructions but upgrade hangs (doesn't stop).

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

IPhoto 6 Hangs When "Recovered Photos" Are Opened

iPhoto 6 "recovered" 300+ photos when I updated from iPhoto 5. I can still see the recovered photos in both my library and albums, but if I double-click on the photos, iPhoto 6 hangs with a spinning ball icon requiring a Force Quit to recover. I can open the photos in the "Recovered Photos" album, but I'm not sure how to get them back into my library and other albums. Has anyone been able to do this?
Thanks, Will
G5, 2 GHz, Dual Processors Mac OS X (10.4.4)

When upgrading to iPhoto 6, the 'recovered photos' it finds are stored as follows:
a if you opt to import the photos when iPhoto asks, they are left where iPhoto found them (or lost them, depending on how you view it...) in the 'year' folder system, within the iPhoto Library folder in the Finder; e.g. 2005>12>15>photo.jpg, 2003>10>05>photo2.jpg etc. Within iPhoto itself the photos are grouped in one new roll, and an album is created in the Source list called "Recovered Photos".
b if you opt not to import the photos, they are moved from the 'year' folder system in the Finder into one folder within the iPhoto Library folder, entitled "Recovered Photos". The 'year' folders can be deleted, if they are still there - you should find that they are empty and they are not used by iPhoto 6.
In Case b you can move the "Recovered Photos" folder to anywhere you like, e.g the Desktop, as the photos are no longer associated with iPhoto. In fact, if you decide you need to import some or all of the photos back into iPhoto, you will have to move the RP folder to another location as iPhoto will disallow any import from within the iPhoto Library folder.
Take care either way; in my case I had 1014 recovered photos, which included all of the following:
a originals of some of my photos, the edited versions were still in iPhoto
b random duplicates of original photos
c photos, both original and edited versions, which I had deleted long ago - sometimes as long as 2-3 years, many versions of iPhoto ago!
When I have chance soon I intend to document my own personal recovery procedure / experience, in case it helps anyone else when upgrading. In the meantime, feel free to ask if you have any questions...

Cannot open iPhoto after downloading Yosemite, I am running iPhoto 6.9 and have downloaded the iPhoto upgrade 1.1 to no avail

Cannot open iPhoto after downloading Yosemite. I have upgraded to iPhoto 6.9 and have downloaded iPhoto upgrader 1.1 to no avail.

Did you go to your Applications/Utilities folder and actually double click on the updater to run it?

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...

In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support

IPhoto Upgrade Problem Version 8.1.2 to iPhoto 9 (iLife 11)

Hello,
I have purchased the iPhoto upgrade from the Mac App Store ($15) and currently have iPhoto version 8.1.2 installed on my computer. I would have thought that the upgrade would have pushed or automatically upgraded my existing iphoto version; however, it just appears to be queued in the Mac App store. When I look in the Mac App Store Purchases tab, I can see the Purchase, but I still have version 8.1.2 installed on my computer. Am I overlooking something? Thanks for the help!
Philip

Make sure the installer isn't paused in LaunchPad, and/or the App Store
Regards
TD

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

Upgrade hangs at TABIM_POST_SHD

Hi all,
My ecc 6 EHP6 upgrade hangs at TABIM_POST_SHD .This is running for the past 5 hours still not completed.From pas experience this phase has never taken so much time .There are no backgroung jobs running nor are the logs being updated.Only 1 file is being updated which sort of runs in loop.
file name is N140317.FED .Following is its content.
=========
1 ED0320XStart phase "001" **********************************************************
1 ED0306       "Preprocessing of TBATG"
1 ED0301 *************************************************************************
1 ED0301X*************************************************************************
1 ED0306       "Preprocessing of TBATG"
1 ED0322 End phase "001" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_9_13959196"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "17.03.2014", "16:30:41"
1 ED0318 Program end==============================================================
A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:30:41"
1AETR012XProgram terminated (job: "RDDGEN0L", no.: "16304100")
1AEPU320 See job log"RDDGEN0L""16304100""FED"
1 ED0317XProgram start============================================================
1 ED0314
1 ED0314 DD: Execution of Database Operations
1 ED0314
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_12_17104976"
1 ED0303 User.....................: "DDIC"
1 ED0305 Date, time...............: "17.03.2014", "16:31:41"
1 ED0307 Platform.................: "CUSTOMER"-"FED"("731")/"ORACLE/AIX/frecchrdev01"
1 ED0311 Tool.....................: "BATCH"/"RADBAT01"
1 ED0315 Log......................: "F", "/EHP6/SUM/abap/tmp/N140317.FED"
1 ED0314
1 ED0316 Program parameters:
1 ED0314 Process cat..............: sequential
1 ED0302 =========================================================================
1 ED0320XStart phase "001" **********************************************************
1 ED0306       "Preprocessing of TBATG"
1 ED0301 *************************************************************************
1 ED0301X*************************************************************************
1 ED0306       "Preprocessing of TBATG"
1 ED0322 End phase "001" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_12_17104976"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "17.03.2014", "16:31:41"
1 ED0318 Program end==============================================================
A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:31:41"
Any help is appreciated
Regards,
Venkatesh Iyer

THe content of Phases.log
1 ETQ201 Entering upgrade-phase "MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD" ("20140317193414")
4 ETQ399 Set database connect to shadow.
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "/EHP6/SUM/abap/exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399   default TPPARAM: SHADOW.TPP
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPDSC
4 ETQ399   auth_shadow_upgrade=<null>
1 ETQ200 Executing actual phase 'MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = ''
2 ETQ399 Arg[1] = 'TABUPOSTSHD.TP0'
2 ETQ399 Arg[2] = ''
2 ETQ399 Arg[3] = 'dummybuffer;buffertest=I'
1 ETQ399 Using error summary log 'TABUPOSTSHD.ELG'.
1 ETQ399 Executing putsteps '{|(n'.
2 ETQ399 Putsteps '{|(n' means no R3trans and no batch processes, so not generating parameters for parallel execution.
3 ETQ399 20140317193414: PID 18677868 execute '/EHP6/SUM/abap/exe/tp pf=/EHP6/SUM/abap/var/SHADOW.TPP checkimpdp FED' , output written to '/EHP6/SUM/abap/log/TOOLOUT.LOG'.
3 ETQ399 20140317193415: PID 18677868 exited with status 200 (time 1.000 real)
1EETQ399 Last error code set is: Calling '/EHP6/SUM/abap/exe/tp' failed with return code 200, check /EHP6/SUM/abap/log/TOOLOUT.LOG for details
tp used shadow connect
1EETQ204 Upgrade phase "TABIM_POST_SHD" aborted with severe errors ("20140317193415")
Content of ULOG14_1
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/NTACT_ALTNT:
fedadm       20140317101106    : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=80 totabname=E1 (pid=4259874)
fedadm       20140317101106    : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=81 fromtabname=E1 totabname=PP (pid=20250662)
fedadm       20140317101107    : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=82 fromtabname=PP (pid=19464390)
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/READPUTTB_UPG_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/CHANGEPROF_SHD2ND:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/START_SHDI_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/SETUPGPAR_SGENPROCS:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/CREATEDBCON_ORIG:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_UPDATE_DDYTT:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSCPINTS_STDRESTORE:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSINCGEN_SHD3:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSUPG_DRBEXT_VALIDATE:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_MSSSPEXE_SH2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_RSUPGCUA_SH2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSUPGBAD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_RDDNEWPP_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSCPINTS_POOL2SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
fedadm       20140317102925    : tp pf=/EHP6/SUM/abap/var/SHADOW.TPP delstopmark buffer=FED (pid=22347776)
fedadm       20140317102925    : tp pf=/EHP6/SUM/abap/var/TABUPOSTSHD.TPP put FED (pid=22347778)
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
Regards,
Venkatesh iyer

The upgrade hangs a lot of time in phase PARCONV_UPG, SHADOW_IMPORT_UPG2..

Hello!!:
I'm doing the CU&UC, as say the Guide, and now i'm upgrading my 46C MDMP system to Ecc6.0 nounicode (later i'm going to
do the unicode).
In the phases RUN_RADCUCNT_ALL, SHADOW_IMPORT_UPG2,....has been a lot of time.
In the Note OSS 558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2, there is a solution
for a Oracle Database, but we have MSSQL2005 in a Windows Server.
In this moment in our DB we have applied as say the Note OSS 187493 - DB13 jobs 'Check table Consistency'
and 'Update statistics', and sometimes in the biggest tables we apply the Note OSS 771352 - Manual UPDATE STATISTICS
re-enables Disabled Automatic Stats
Can you help us? In this moment the upgrade downtime is 48 hours (and we haven't yet done some phases of the
upgrade)
Thanks an regards,
Alfredo.

Alfredo,
Here is the down and skinny on this - PARCONV_UPG can be addressed with ICNV (Incremental Table Conversion) which you can run during the 'Up' Time of the upgrade. Of course there are some limitations put on you when using this solution but it will help to reduce your down-time windows be pre-converting tables during up-time. Those tables that are not converted in ICNV will have to be converted during down-time during the PARCONV_UPG phase so I am pretty sure that your database is getting its (stuff here....) handed to it.
As a 'suggestion' and not a rule here (because it effects recovery of SQL Databases) you can look at using Bulk Logged or Simple Logged modes if your system is using Full-Logged mode to speed things up a bit (actually quite a bit if Full-Logged is enabled).
As for the SHADOW_IMPORT_UPG2 - this is mostly going to be tp putting things in the system and some compiling - the speed of the Db and the processors play a big impact in this. You can watch the SLOG in the upgrade directory to check this out (look in your upgrade guide for Log Files during this phase to get their names and locations) to see if anything is hanging but I would probably expect not much is going on.
Overall you need to identify the bottleneck first - CPU, Memory, Db I/O, a number of things can contribute to your issues of slow upgrade time - as I would have to agree with SAP that there is nothing wrong with the Upgrade Process (except that you can take advantage of things like ICNV where possible - read the upgrade guide and hit the notes and help first!!). Everything else is going to be your setup and how it reacts to the different activities in the upgrade.
So check those out first - let us all know what you come up with and hopefully we can fix your problem directly and quickly.
Edited by: David Milliken on Apr 3, 2008 7:09 PM
Edited by: David Milliken on Apr 3, 2008 7:10 PM

Problems with iPhoto upgrader on iPhoto 7.1.5. HELP!

I installed and ran the iPhoto upgrader for iPhoto 7 in preparation to install a newer version of iPhoto (9 or later) so that i can get photo album and books printed via iPhoto. I downloaded a number of available iPhoto 9 upgrades, but none worked even through i had run the upgrader. I am now stuck with a MacBook (OS X 10.7.5) with a version of iPhoto that won't open (error message: You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto) and also wo';t allow me to install any iPhoto upgrades. Help! I have tried to restore iPhoto from time machine, but that hasn't worked, plus trying the original install disk for my laptop hasn't worked, presumably because i have upgraded the OS a few times since i got it (it's a late 2008 dinosaur of a macbook!). I am worried that now i have lost my photos and will have to pay 50 quid for a iLife disk with no guarantee that it will work. All i really want to do is un-install the upgrader and return iPhoto to it's original 7.1.5 state. Is that possible? Also how can i check that my photos are still stored somewhere without being able to open iPhoto? Please help! Thank you.

You only need to run the upgrader if you have iPhoto 9.5. It's not needed for other iPhoto 9 versions, i.e. 9.0 thru 9.4.3.
You might be able to downgrade that library by following this iPhoto LIbrary Manager tutorial: Fat Cat Software - iPhoto Library Manager Help - Downgrading a library to an earlier version of iPhoto
Happy Holidays

There's a glitch somewhere. iphoto just wont open. upgraded to yosemite and downloaded iPhoto upgrader and it doesn't work, just keeps telling me to upgrade when I did already or quit, so no way to do photos on this brand new mac. that's a pity!!

there’s a glitch somewhere. iphoto just wont open. upgraded to yosemite and downloaded iPhoto upgrader and it doesn’t work, just keeps telling me to upgrade when I did already or quit, so no way to do photos on this brand new mac. that’s a pity!!

You need to have iPhoto 11 v9.6 (which you can get from the App Store) to use iPhoto on Yosemite. If you already have iPhoto 11 then the update is free. Otherwise it's a purchase.

There are too many questions "like" mine, so here it is: I updated from Mountain Lion to Yosemite, I can't open iphoto 9.1.5, I am directed to the app store, I "accept" iphoto upgrade and enter my credentials, but no update occurs. :-(

Attempting iPhoto upgrade from 9.1.5 to 9.5.

How many questions like yours should there be? What exactly do you expect the volenteers here to do about what you personally consider "too many questions"?
To move to iphoto 9.6 (required for Yosemite) You must log in to the App store using the Apple ID that was used to set up the compter (or purchase the application if it was purchased later), backup your iPhoto library and then download and install iPhoto 9.6 from the App store
If that is not working then you must contact App store suport - link is on the right of the App store window
LN

IPhoto Upgrade iBook G4 so can continue to order books & prints?

Hi,
Trying to determine the lowest v iPhoto upgrade for continued ability to order books and prints...would that be the iPhoto version in iLife 05? ...don't want/need GarageBand, iDVD, etc., just iPhoto! Recommendations appreciated.

This page
http://www.apple.com/support/photoservices/ordering_options/
tells us that you can order books with v6 or later.
You can place orders for Print Products using iPhoto 6, iPhoto '08, and iPhoto '09, as well as Aperture 2.
As you're on 10.4.11 you might want to go to iPhoto 08 as it's the highest you can run, and will probably be easier to find. Note that you cannot upgrade to any version without purchasing the iLife suite.
Regards
TD

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

Iphoto upgrade hangs

Similar Messages

Maybe you are looking for