IPhoto upgrade will not install after downloading Yosemite

iPhoto will not upgrade after installing Yosemite.

Ok so here's what you gonna do. (had this problem myself today, and after some fiddling figured out what to do.)
Find your old iPhoto with a cross through it, right-click it and select 'show package contents'. A folder will open. In that folder go to Contents>MacOS and there will be three little things there. Click on the one called 'iPhoto' and terminal will open. Leave terminal open and wait four seconds and VOILA! iPhoto opens. Leave terminal open until you are finished with iPhoto, because if you close terminal, iPhoto will close with it. THX! ENJOY! Hope it works.
P.S.
You can close terminal once you close iPhoto. I also suggest backing up your iPhoto library while you can.

Similar Messages

  • Adobe Flash Upgrade will not install after Firefox upgrade to 3.6.7

    I upgraded to Firefox 3.6.7. After the upgrade I got a message that I needed to upgrade Adobe Flash due to security vulnerabilities. The Flash upgrade will not install. It simply sits and never installs no matter how long I wait.
    == This happened ==
    Just once or twice

    Thanks for your response. I have previously reviewed this. The only potential problem it seems to resolve is having 2 versions of Shockwave installed. I only have one. The only thing I can think of to do is just uninstall the one version and see if it will trigger an installation. When I go to the Flash install site, I agree to the terms and get the next screen that says download will start. I never get a message asking if it's ok to run or anything. No matter where I look for a download for Flash I wind up at the same place with the same problem. Any suggestions would be most appreciated.
    Thanks

  • IPhoto upgrade will not install

    I have a new iMac, OSX Mavericks .  Data transfer from my MacBook Pro via my ext. hard drive was done by Apple.  But, Mavericks will not open my iPhoto and says I must upgrade.  The upgrade never finishes.  What can I do? I need to access my photos asap.

    Ok so here's what you gonna do. (had this problem myself today, and after some fiddling figured out what to do.)
    Find your old iPhoto with a cross through it, right-click it and select 'show package contents'. A folder will open. In that folder go to Contents>MacOS and there will be three little things there. Click on the one called 'iPhoto' and terminal will open. Leave terminal open and wait four seconds and VOILA! iPhoto opens. Leave terminal open until you are finished with iPhoto, because if you close terminal, iPhoto will close with it. THX! ENJOY! Hope it works.
    P.S.
    You can close terminal once you close iPhoto. I also suggest backing up your iPhoto library while you can.

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Iphoto will not update since downloading Yosemite

    iPhoto will not update since downloading Yosemite--any help?

    Cancel the updates. Delete the apps. Redownload them from the Purchases tab in the App Store.

  • Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro  OS 10.6.8   Processor 2.66Ghz i

    Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
    My Machine MacBook Pro  OS 10.6.8  
    Processor 2.66Ghz i7,
    4GB memory
    128GB solid state drive
    Purchased 2010

    Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
    Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

  • Premiere Pro CS5.5.2  will not install after motherboard replacement ?

    Premiere Pro CS5.5.2 will not install after mothboard replacement .It was running correctly for 4 weeks prior to replacement due to AC connection issues and Wireless connectivity.
    Adobe Case No. 183519673, Adobe Technicians (Asia/Pacific) have worked on this issue for over 3 hours with no results after uninstalling and reinstalling.
    Any ideas to fix issue wou;ld be appreciated.

    Also posted to the Hardware section http://forums.adobe.com/message/4634472
    There is a New forum for Download & Install & Setup problems
    http://forums.adobe.com/community/download_install_setup
    Or, call Adobe
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7
    I suggested providing motherboard brand/model information
    [Additional information from other topic added]

  • ITunes 11.1 will not open after downloading.

    iTunes 11.1 will not open after downloading; iTunes64.msi is "missing". I can't uninstall the present iTunes version (11.0.5.5). Any ideas? Please?

    *****FIXED*****
    This is what I did to fix it.  I am running Win7 so I don't know if it will work on Win 8 or not. 
    1-Uninstalled QuickTime
    2-Uninstalled Apple Mobile Device Manager
    3-Uninstalled Apple Software Update Manager
    4-Uninstalled iTunes
    5-Uninstalled iCloud
    6-Uninstalled any left over Apple software
    7-Restarted Computer
    8-Installed iTunes
    9-Restarted Computer
    I did not install iCloud.  I was able to authorize my PC and Sync did work.

  • Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

    i upgraded to Lion and now itune upgrade will not install (error message appears)

    iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

  • The app store will not load after downloading Mountain Lion.

    The app store will not load after downloading Mountain Lion. Anyone else having this problem. It works on the the admins acount on the computer but none others. All of the parnetal controls are off and it doesnt work. All i get from the app store is this.

    Yes. I have done everything. restarted, made sure there are no funny blocks or no permissions

  • TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

    Just rented a movie in French on my iMac... movie will not start after download ?
    What I do now ?

    Okay. I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • HT1338 iphoto upgrade will not quit or end?

    hi, please can you help?
    my iphoto upgrade will not finish or quit.
    it went to 9 of 9 then I did leave it over night, now it is stuck on 5 of 9? (99% complete)
    i tried "alt" key and "cmd" key which i had seen on other help, put by just pressing these that does not move the iphoto screen or stop the little circle wizzing around?
    can you help please?

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    If that fails:
    Restore from your back up, repair the Library and try again.

  • Firmware 1.1 upgrade will not install - even after uninstalling Parallels

    I was asked to upgrade my firmware (on many occasions, actually). I go through the process and it will not install. It asks me to shut down the computer and continuing holding the button until the light blinks. It then makes a noise (high pitch tone), this stops, the mac screen comes up gray and a bar comes up and disappears immediately. The computer boots and then the firmware page opens and asks me to go through this again. I cannot get to "OK". I called Apple and was told this happens with Parallels installed and I should uninstall this. I have tried this and it makes no difference. There may be some files I should delete - but I wasn't instructed to do this.
    HELP!!!!
    Mac Pro   Mac OS X (10.4.9)   Parallels virtualization for XPpro

    Hi Tom,
    very easy by booting up from a Non-RAID-Boot Volume.
    This could be an internal or even an external Drive, doesn't matter.
    One of the reasons I have two external drives for my tow Macs.
    Regards
    Stefan

Maybe you are looking for

  • HP Deskjet 3050A wireless printing problem with Macbook Air

    Hello, I have a HP Deskjet 3050A printer that I have been using with my MacBook Air (2012 OS X 10.8.3) until a few weeks ago when it seemed to hang when trying to print and then say no printer found (even though it showed and was selected in the Prin

  • Function output in a select statement

    I have written a function(get_cols) which returns the following string (this string is created dynamically from the fuctions depending on the rows of the tables) the output of the function is; MAX (CASE WHEN field_code = 'test_pho' THEN VALUE END ) A

  • Photoshop Elements 9 plug in and Aperture 3

    I recently loaded Photoshop Elements 9 (for Mac).  I had expected the plug-in to appear automatically in the Aperture 3 pull down menu.  Obviously I have done something wrong.  But what?  Advice please

  • Want to use Oracle in SavingsAccount example

    Hi I am able to run the SavingsAccount sample aaplication using the Cloudscape db provided with J2EE. I want to run the same application with Oracle 8i.I have already run the savingsaccount.sql on Oracle to create the table. Please help me. I want to

  • Fit Guide Problem

    BB fit guide says that Jenson VM9412 does not fit my truck ('04 Dodge 1500 Quad) but Crutchfeild says it fits. The radio specs say it is DIN wich is what should fit my truck. I want to buy it from BB for the price but not sure what to do. Any help?