Iphoto version 7.1.5 auto start problem
Every time I turn on my imac (Mac OS X version 10.5.8), iphoto (version 7.1.5) automatically starts up. How do I stop iphoto from opening every time I start my computer? Thanks
Do you have any storage devices connected taht are formatted FAT? iPhoto sees these as cameras - so if yu do the solution is to disconnect ehm or to set the iphto ction when a camera is connected to do nothing in the iPhoto preferences
If that is not it look in your start up items in yuor accountin the system preferences
And right click on iPhoto in the Dock an be sure that it is not set up to opn at start up
LN
Similar Messages
-
CRS on Redhat 5 auto-start problem
Dear all
Recently I tried to install Oracle 10gR2 on Redhat 5. I did research and took all the necessary actions to install it on Redhat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD was in unknown format. When I stop the nodeapps and start it again, everything stars working. It seems that the problem is something to do with boot process. I tried to put some delay ( for OCR mount ) but still no luck. This is the result from crsd.log from node1 when node2 is down.. :
2009-06-24 22:00:07.461: [ default][3594852768]0CRS Daemon Starting
2009-06-24 22:00:07.461: [ CRSMAIN][3594852768]0Checking the OCR device
2009-06-24 22:00:07.464: [ CRSMAIN][3594852768]0Connecting to the CSS Daemon
2009-06-24 22:00:07.838: [ COMMCRS][1103116608]clsc_connect: (0x151f20d0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:07.838: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:07.838: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:09.307: [ COMMCRS][1103116608]clsc_connect: (0x151f23b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:09.307: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:09.307: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:10.773: [ COMMCRS][1103116608]clsc_connect: (0x151f25c0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:10.773: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:10.774: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:12.150: [ COMMCRS][1103116608]clsc_connect: (0x151f2880) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:12.150: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:12.150: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:19.093: [ CRSD][3594852768]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2009-06-24 22:00:19.093: [ CRSD][3594852768]0Active Version and Software Version are same
2009-06-24 22:00:19.093: [ CRSMAIN][3594852768]0Initializing OCR
2009-06-24 22:00:19.098: [ OCRRAW][3594852768]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.128: [ OCRMAS][1228994880]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number = 1
2009-06-24 22:00:19.129: [ OCRRAW][1228994880]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.144: [ CRSD][3594852768]0ENV Logging level for Module: allcomp 0
2009-06-24 22:00:19.144: [ CRSD][3594852768]0ENV Logging level for Module: default 0
2009-06-24 22:00:19.145: [ CRSD][3594852768]0ENV Logging level for Module: COMMCRS 0
2009-06-24 22:00:19.145: [ CRSD][3594852768]0ENV Logging level for Module: COMMNS 0
2009-06-24 22:00:19.146: [ CRSD][3594852768]0ENV Logging level for Module: CRSUI 0
2009-06-24 22:00:19.146: [ CRSD][3594852768]0ENV Logging level for Module: CRSCOMM 0
2009-06-24 22:00:19.148: [ CRSD][3594852768]0ENV Logging level for Module: CRSRTI 0
2009-06-24 22:00:19.148: [ CRSD][3594852768]0ENV Logging level for Module: CRSMAIN 0
2009-06-24 22:00:19.149: [ OCRSRV][1249974592]th_select_handler: Failed to retrieve procctx from ht. constr = [363817168] retval lht [-27] Signal CV.
2009-06-24 22:00:19.149: [ CRSD][3594852768]0ENV Logging level for Module: CRSPLACE 0
2009-06-24 22:00:19.149: [ CRSD][3594852768]0ENV Logging level for Module: CRSAPP 0
2009-06-24 22:00:19.150: [ CRSD][3594852768]0ENV Logging level for Module: CRSRES 0
2009-06-24 22:00:19.150: [ CRSD][3594852768]0ENV Logging level for Module: CRSOCR 0
2009-06-24 22:00:19.151: [ CRSD][3594852768]0ENV Logging level for Module: CRSTIMER 0
2009-06-24 22:00:19.151: [ CRSD][3594852768]0ENV Logging level for Module: CRSEVT 0
2009-06-24 22:00:19.152: [ CRSD][3594852768]0ENV Logging level for Module: CRSD 0
2009-06-24 22:00:19.153: [ CRSD][3594852768]0ENV Logging level for Module: CLUCLS 0
2009-06-24 22:00:19.154: [ CRSD][3594852768]0ENV Logging level for Module: OCRRAW 0
2009-06-24 22:00:19.155: [ CRSD][3594852768]0ENV Logging level for Module: OCROSD 0
2009-06-24 22:00:19.155: [ CRSD][3594852768]0ENV Logging level for Module: CSSCLNT 0
2009-06-24 22:00:19.156: [ CRSD][3594852768]0ENV Logging level for Module: OCRAPI 0
2009-06-24 22:00:19.157: [ CRSD][3594852768]0ENV Logging level for Module: OCRUTL 0
2009-06-24 22:00:19.158: [ CRSD][3594852768]0ENV Logging level for Module: OCRMSG 0
2009-06-24 22:00:19.159: [ CRSD][3594852768]0ENV Logging level for Module: OCRCLI 0
2009-06-24 22:00:19.159: [ CRSD][3594852768]0ENV Logging level for Module: OCRCAC 0
2009-06-24 22:00:19.160: [ CRSD][3594852768]0ENV Logging level for Module: OCRSRV 0
2009-06-24 22:00:19.160: [ CRSD][3594852768]0ENV Logging level for Module: OCRMAS 0
2009-06-24 22:00:19.161: [ CRSMAIN][3594852768]0Filename is /u01/app/crs/crs/init/rac1dr.pid
[ clsdmt][1417812288]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1drDBG_CRSD))
2009-06-24 22:00:19.506: [ CRSMAIN][3594852768]0Using Authorizer location: /u01/app/crs/crs/auth/
2009-06-24 22:00:19.760: [ CRSMAIN][3594852768]0Initializing RTI
2009-06-24 22:00:19.761: [CRSTIMER][1438792000]0Timer Thread Starting.
2009-06-24 22:00:19.770: [ CRSRES][3594852768]0Parameter SECURITY = 1, running in USER Mode
2009-06-24 22:00:19.770: [ CRSMAIN][3594852768]0Initializing EVMMgr
2009-06-24 22:00:19.996: [ COMMCRS][1449281856]clsc_connect: (0x15b1dc20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2009-06-24 22:00:21.860: [ CRSMAIN][3594852768]0CRSD locked during state recovery, please wait.
2009-06-24 22:00:22.494: [ CRSMAIN][3594852768]0CRSD recovered, unlocked.
2009-06-24 22:00:22.496: [ CRSMAIN][3594852768]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2009-06-24 22:00:22.604: [ CRSMAIN][3594852768]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac1dr-priv)(PORT=49896))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0Starting Threads
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0CRS Daemon Started.
2009-06-24 22:00:23.732: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:23.821: [ CRSRES][1554180416]0Attempting to start `ora.rac2dr.vip` on member `rac1dr`
2009-06-24 22:00:23.822: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:23.935: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.vip` on member `rac1dr`
2009-06-24 22:00:30.657: [ CRSRES][1554180416]0Start of `ora.rac2dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:30.705: [ CRSRES][1543690560]0Start of `ora.rac1dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:31.408: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:31.410: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:31.647: [ CRSRES][1554180416]0Attempting to start `ora.rac1dr.gsd` on member `rac1dr`
2009-06-24 22:00:31.708: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.ons` on member `rac1dr`
2009-06-24 22:00:32.538: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.538: [ CRSAPP][1554180416]0StartResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.573: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.573: [ CRSAPP][1543690560]0StartResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.737: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.737: [ CRSAPP][1554180416]0StopResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.837: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.837: [ CRSAPP][1543690560]0StopResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.873: [ CRSRES][1554180416][ALERT]0`ora.rac1dr.gsd` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0Human intervention required to resume its availability.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.921: [ CRSRES][1543690560][ALERT]0`ora.rac1dr.ons` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0Human intervention required to resume its availability.
Any help is highly appreciated.
KamyCRS on RHEL 5.5 auto-start problem
hi all
Recently I install RAC Oracle 10gR2 on Red hat RHEL 5.5. “Two node cluster, iscsi storage, ocfs2 mounted files & ASM ”
I did research and took all the necessary actions to install it on Red hat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD ,ASM and the other services was in unknown state. When I stop the CRS & start it –all again, everything stars working. Please friends I need to fix this problem because the cluster services and the client workstation are stopping when the servicers is relocated to node 1 after the server reboot because the CRS did not worked still on node and manual starting is taking time.
This is the result from crsd.log from node1 when node is online .
Name Type Target State Host
ora....SM1.asm application ONLINE UNKNOWN linux1
ora....X1.lsnr application ONLINE UNKNOWN linux1
ora.linux1.gsd application ONLINE UNKNOWN linux1
ora.linux1.ons application ONLINE UNKNOWN linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora....SM2.asm application ONLINE ONLINE linux2
ora....X2.lsnr application ONLINE ONLINE linux2
ora.linux2.gsd application ONLINE ONLINE linux2
ora.linux2.ons application ONLINE ONLINE linux2
ora.linux2.vip application ONLINE ONLINE linux2
ora.mutdb.db application ONLINE ONLINE linux2
ora....b1.inst application ONLINE OFFLINE
ora....b2.inst application ONLINE ONLINE linux2
ora...._taf.cs application ONLINE ONLINE linux2
ora....db1.srv application ONLINE UNKNOWN linux1
ora....db2.srv application ONLINE ONLINE linux2
############################### CRS Log ON Node 1 ##################################
2010-05-27 11:54:57.357: [ default][3741415840][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2010-05-27 11:54:57.366: [ default][3741415840]0CRS Daemon Starting
2010-05-27 11:54:57.366: [ CRSMAIN][3741415840]0Checking the OCR device
2010-05-27 11:54:57.379: [ CRSMAIN][3741415840]0Connecting to the CSS Daemon
2010-05-27 11:54:57.783: [ COMMCRS][1107867968]clsc_connect: (0x8481ce0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:57.783: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:57.783: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:54:59.182: [ COMMCRS][1107867968]clsc_connect: (0x8481f60) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:59.182: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:59.182: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:00.569: [ COMMCRS][1107867968]clsc_connect: (0x84821f0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:00.569: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:00.569: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:01.954: [ COMMCRS][1107867968]clsc_connect: (0x84824b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:01.954: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:01.954: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:05.924: [ CRSD][3741415840]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2010-05-27 11:55:05.924: [ CRSD][3741415840]0Active Version and Software Version are same
2010-05-27 11:55:05.924: [ CRSMAIN][3741415840]0Initializing OCR
2010-05-27 11:55:05.937: [ OCRRAW][3741415840]proprioo: for disk 0 (/u02/OCR_1.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.938: [ OCRRAW][3741415840]proprioo: for disk 1 (/u03/OCR_2.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.981: [ CRSD][3741415840]0ENV Logging level for Module: allcomp 0
2010-05-27 11:55:05.983: [ CRSD][3741415840]0ENV Logging level for Module: default 0
2010-05-27 11:55:05.994: [ CRSD][3741415840]0ENV Logging level for Module: COMMCRS 0
2010-05-27 11:55:05.996: [ CRSD][3741415840]0ENV Logging level for Module: COMMNS 0
2010-05-27 11:55:05.999: [ CRSD][3741415840]0ENV Logging level for Module: CRSUI 0
2010-05-27 11:55:06.001: [ CRSD][3741415840]0ENV Logging level for Module: CRSCOMM 0
2010-05-27 11:55:06.003: [ CRSD][3741415840]0ENV Logging level for Module: CRSRTI 0
2010-05-27 11:55:06.006: [ CRSD][3741415840]0ENV Logging level for Module: CRSMAIN 0
2010-05-27 11:55:06.008: [ CRSD][3741415840]0ENV Logging level for Module: CRSPLACE 0
2010-05-27 11:55:06.010: [ CRSD][3741415840]0ENV Logging level for Module: CRSAPP 0
2010-05-27 11:55:06.012: [ CRSD][3741415840]0ENV Logging level for Module: CRSRES 0
2010-05-27 11:55:06.015: [ CRSD][3741415840]0ENV Logging level for Module: CRSOCR 0
2010-05-27 11:55:06.017: [ CRSD][3741415840]0ENV Logging level for Module: CRSTIMER 0
2010-05-27 11:55:06.019: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [148436880] retval lht [-27] Signal CV.
2010-05-27 11:55:06.019: [ CRSD][3741415840]0ENV Logging level for Module: CRSEVT 0
2010-05-27 11:55:06.022: [ CRSD][3741415840]0ENV Logging level for Module: CRSD 0
2010-05-27 11:55:06.024: [ CRSD][3741415840]0ENV Logging level for Module: CLUCLS 0
2010-05-27 11:55:06.027: [ CRSD][3741415840]0ENV Logging level for Module: OCRRAW 0
2010-05-27 11:55:06.029: [ CRSD][3741415840]0ENV Logging level for Module: OCROSD 0
2010-05-27 11:55:06.032: [ CRSD][3741415840]0ENV Logging level for Module: CSSCLNT 0
2010-05-27 11:55:06.034: [ CRSD][3741415840]0ENV Logging level for Module: OCRAPI 0
2010-05-27 11:55:06.036: [ CRSD][3741415840]0ENV Logging level for Module: OCRUTL 0
2010-05-27 11:55:06.039: [ CRSD][3741415840]0ENV Logging level for Module: OCRMSG 0
2010-05-27 11:55:06.041: [ CRSD][3741415840]0ENV Logging level for Module: OCRCLI 0
2010-05-27 11:55:06.043: [ CRSD][3741415840]0ENV Logging level for Module: OCRCAC 0
2010-05-27 11:55:06.046: [ CRSD][3741415840]0ENV Logging level for Module: OCRSRV 0
2010-05-27 11:55:06.048: [ CRSD][3741415840]0ENV Logging level for Module: OCRMAS 0
2010-05-27 11:55:06.048: [ CRSMAIN][3741415840]0Filename is /u01/app/crs/crs/init/linux1.pid
[ clsdmt][1401583936]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=linux1DBG_CRSD))
2010-05-27 11:55:06.119: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149741888] retval lht [-27] Signal CV.
2010-05-27 11:55:07.002: [ CRSMAIN][3741415840]0Using Authorizer location: /u01/app/crs/crs/auth/
2010-05-27 11:55:07.008: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149755728] retval lht [-27] Signal CV.
2010-05-27 11:55:07.230: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149740416] retval lht [-27] Signal CV.
2010-05-27 11:55:07.380: [ CRSMAIN][3741415840]0Initializing RTI
2010-05-27 11:55:07.380: [CRSTIMER][1422563648]0Timer Thread Starting.
2010-05-27 11:55:07.386: [ CRSRES][3741415840]0Parameter SECURITY = 1, running in USER Mode
2010-05-27 11:55:07.386: [ CRSMAIN][3741415840]0Initializing EVMMgr
2010-05-27 11:55:07.453: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150974816] retval lht [-27] Signal CV.
2010-05-27 11:55:07.474: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150975552] retval lht [-27] Signal CV.
2010-05-27 11:55:07.485: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150988032] retval lht [-27] Signal CV.
2010-05-27 11:55:07.723: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150998720] retval lht [-27] Signal CV.
2010-05-27 11:55:07.734: [ CRSMAIN][3741415840]0CRSD locked during state recovery, please wait.
2010-05-27 11:55:07.737: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150997792] retval lht [-27] Signal CV.
2010-05-27 11:55:07.923: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [151007072] retval lht [-27] Signal CV.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0CRSD recovered, unlocked.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2010-05-27 11:55:08.051: [ CRSMAIN][3741415840]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=linux1-priv)(PORT=49896))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0Starting Threads
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0CRS Daemon Started.
2010-05-27 11:55:08.204: [ CRSRES][1527462208]0StopResource: setting CLI values
2010-05-27 11:55:08.220: [ CRSRES][1527462208]0Attempting to stop `ora.linux1.vip` on member `linux2`
2010-05-27 11:55:08.515: [ CRSRES][1527462208]0Stop of `ora.linux1.vip` on member `linux2` succeeded.
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0Attempting to start `ora.linux1.vip` on member `linux1`
2010-05-27 11:55:08.686: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154566384] retval lht [-27] Signal CV.
2010-05-27 11:55:14.000: [ CRSRES][1527462208]0Start of `ora.linux1.vip` on member `linux1` succeeded.
2010-05-27 11:55:14.231: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.272: [ CRSRES][1527462208]0Attempting to start `ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1`
2010-05-27 11:55:14.426: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.426: [ CRSAPP][1527462208]0StartResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.489: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.489: [ CRSAPP][1527462208]0StopResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.495: [ CRSRES][1527462208][ALERT]0`ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:14.628: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.698: [ CRSRES][1527462208]0Attempting to start `ora.linux1.ASM1.asm` on member `linux1`
2010-05-27 11:55:14.836: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.836: [ CRSAPP][1527462208]0StartResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.875: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.875: [ CRSAPP][1527462208]0StopResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.881: [ CRSRES][1527462208][ALERT]0`ora.linux1.ASM1.asm` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.051: [ CRSRES][1527462208]0CRS-1028: Dependency analysis failed because of:
'Resource in UNKNOWN state: ora.linux1.ASM1.asm'
2010-05-27 11:55:15.185: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:15.237: [ CRSRES][1537952064]0startRunnable: setting CLI values
2010-05-27 11:55:15.306: [ CRSRES][1558931776]0startRunnable: setting CLI values
2010-05-27 11:55:15.339: [ CRSRES][1527462208]0Attempting to start `ora.linux1.gsd` on member `linux1`
2010-05-27 11:55:15.397: [ CRSRES][1537952064]0Attempting to start `ora.linux1.ons` on member `linux1`
2010-05-27 11:55:15.407: [ CRSRES][1558931776]0Attempting to start `ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1`
2010-05-27 11:55:15.789: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.789: [ CRSAPP][1527462208]0StartResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.808: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.808: [ CRSAPP][1537952064]0StartResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.812: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.812: [ CRSAPP][1558931776]0StartResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.838: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.838: [ CRSAPP][1527462208]0StopResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.844: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.845: [ CRSAPP][1537952064]0StopResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.849: [ CRSRES][1527462208][ALERT]0`ora.linux1.gsd` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.859: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.860: [ CRSAPP][1558931776]0StopResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.863: [ CRSRES][1537952064][ALERT]0`ora.linux1.ons` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0Human intervention required to resume its availability.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.869: [ CRSRES][1558931776][ALERT]0`ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0Human intervention required to resume its availability.
2010-05-27 11:55:20.450: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
2010-05-27 11:55:21.130: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
I tired this solution it was on website “but it did not work”
下面是METALINK给出的解释：
I have checked the information provided. crsd is reporting timeouts when running the checking actions. The racgmain process on the other hand, executed by racgwrap, remain running so the number is increasing.This issue has been reported in Bug 7009245 ""RACGMAIN CHECK" PROCESS NOT TERMINATING", and drill down and determine the root cause this require to get a stack trace from racgmain process(es) as well as you should runOSWatcher with a specific parameters, finally the issue of Bug 7009245 has been fixed by the fix of Bug 6196746 (unpublished bug -- summary is "racgwrap spawns racgmain child process. crsd timeout kills racgwrap but bot racgmain")So please perform the following action plan that intend to solve the issue.
.ACTION PLAN
============
1. Stop CRS on this node.
2. Make a copy of racgwrap located under $ORACLE_HOME/bin and $CRS_HOME/bin
3. Edit the file racgwrap and modify the last 3 lines from:
.$ORACLE_HOME/bin/racgmain "$@"
status=$?
exit $status
.to:
.# Line added to test fix for Bug 6196746
exec $ORACLE_HOME/bin/racgmain "$@"
.4. Restart CRS and make sure that all the resources are startes
This should solve the issue. also if you are not able to stop CRS right now, you can try the
solution without crs stop/start.
BUT IT DID NOT WORK
###################################################3 -
Hello, First time posting so don't punish me for any mistakes
Here is the problem:
After removing gnome and installing xfce Arch doesn't go into GUI mode automatically.
I am stuck at the command line.
From there I can type startxfce4 and it work but I want it do to start automatically.
This is my .xinitrc file
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
exec startxfce4
# ...or the Window Manager of your choice
and this is my .bash_profile
# ~/.bash_profile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
Any inputs are highly appreciated!!
Last edited by Ace (2014-01-21 18:55:13)Put a bit of debugging info in your script, to remove some uncertainty. E.g.:
echo "Checking whether to run xorg"
First run this, to be on safe side:
chmod 700 ~/.bash_profile
Here's how I do it, in my ~/.bash_profile
# My ~/.bashrc does everything - convenient, but slightly un-optimized
. $HOME/.bashrc
hour=$(date +%k | sed "s:^ ::")
if [[ $hour -ge 8 ]] && [[ $hour -le 9 ]] ; then
if [[ `tty` == "/dev/tty1" ]] && [[ -z `pgrep ^X$` ]] ; then
if lsmod | grep -qw ^nvidia ; then
echo "Starting xorg"
# https://bbs.archlinux.org/viewtopic.php?id=150539
setsid /usr/bin/startx -- -nolisten tcp &> ~/.xorg.log & logout
fi
fi
fi
Edit: Oops, got a bit confused, ignore this last line
Last edited by brebs (2014-01-22 20:07:52) -
Nuron: Contacts app auto-starts -- how to prevent...
The T-Mobile version of my Nuron auto-starts the Contact app to do a sync with its cloud backup service. I'm trying to find how to turn this off, with no success.
Any ideas?
Thanks,
jeromeIs this looking like to be a hardware problem?
Can I take it to any apple store & get fixed? -
Skype/Pulse audio problem only if auto started
Hi,
I've an Arch/XFCE laptop including pulse audio and Skype (configured to use the pulse audio).
Skype has been configured (using XFCE startup menu) to auto start during boot ( we boot daily), and, till about 2 weeks ago, worked fine.
Ever since, Skype starts but isn't functional (while trying to connect to the test service I can't hear anything, not even the dialing), and, after a few minutes, starts with a constant loud noise (which stops, once I quit Skype).
Interesting, since the problem has begun, once I do either of the following, Skype returns, and remains, to be fully functional without any noise:
1. Quit the auto-started Skype, and immediately relaunch it.
2. Cancel to Skype auto start, and manually start Skype after XFCE becomes visible.
Looking at log files (below), I've seen some pulse audio related errors which I couldn't solve and may be related.
I do a full system update (almost) daily.
I'd be happy to return to the former state (functional auto-started Skype). Please advise
Thanks
----------partial end of journal------------------
Jun 08 08:51:08 Ira-Lenovo lightdm[246]: ** (process:272): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:08 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Created slice user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting User Manager for UID 620...
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd-logind[234]: New session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Startup finished in 78ms.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started User Manager for UID 620.
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Activating service name='org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Successfully activated service 'org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Unable to register client with session manager
Jun 08 08:51:15 Ira-Lenovo lightdm[246]: ** (process:297): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:15 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session closed for user lightdm
Jun 08 08:51:15 Ira-Lenovo lightdm[297]: pam_unix(lightdm:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Created slice user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting User Manager for UID 1000...
Jun 08 08:51:15 Ira-Lenovo systemd[302]: pam_unix(systemd-user:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd-logind[234]: New session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Startup finished in 36ms.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started User Manager for UID 1000.
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Started RealtimeKit Scheduling Policy Service.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully called chroot.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully dropped privileges.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully limited resources.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Watchdog thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Canary thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 328 of process 328 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 332 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 333 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 3 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] main.c: Module load failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jun 08 08:51:22 Ira-Lenovo kernel: fuse init (API version 7.22)
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounting FUSE Control File System...
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounted FUSE Control File System.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 392 of process 392 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Supervising 4 threads of 2 processes of 1 users.
Jun 08 08:51:22 Ira-Lenovo pulseaudio[392]: Daemon already running.
Jun 08 08:51:23 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Jun 08 08:51:23 Ira-Lenovo systemd[1]: Starting Disk Manager...
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: udisks daemon version 2.1.3 starting
Jun 08 08:51:24 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 08 08:51:24 Ira-Lenovo systemd[1]: Started Disk Manager.
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 08 08:51:25 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Jun 08 08:51:25 Ira-Lenovo systemd[1]: Starting Daemon for power management...
Jun 08 08:51:26 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UPower'
Jun 08 08:51:26 Ira-Lenovo systemd[1]: Started Daemon for power management.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): carrier now ON (device state 20)
Jun 08 08:51:26 Ira-Lenovo kernel: r8169 0000:06:00.0 enp6s0: link up
Jun 08 08:51:26 Ira-Lenovo kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Auto-activating connection 'Wired connection 1'.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) starting connection 'Wired connection 1'
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTING
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) starting...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) successful.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) scheduled.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> dhcpcd started with pid 440
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning IP6 addrconf.
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) complete.
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: version 6.3.2 starting
Jun 08 08:51:28 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed nbi -> preinit
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: DUID 00:01:00:01:1a:27:1d:43:1c:75:08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: IAID 08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: soliciting an IPv6 router
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: rebinding lease of 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: leased 192.168.1.13 for 3600 seconds
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: adding route to 192.168.1.0/24
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed preinit -> bound
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> address 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> prefix 24 (255.255.255.0)
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> gateway 192.168.1.1
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '192.117.235.235'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '62.219.186.7'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) started...
Jun 08 08:51:35 Ira-Lenovo dhcpcd[440]: enp6s0: removing route to 192.168.1.0/24
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTED_GLOBAL
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Policy set 'Wired connection 1' (enp6s0) as default for IPv4 routing and DNS.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Writing DNS information to /usr/bin/resolvconf
Jun 08 08:51:36 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) successful, device activated.
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Starting Network Manager Script Dispatcher Service...
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Started Network Manager Script Dispatcher Service.
Jun 08 08:51:41 Ira-Lenovo dhcpcd[440]: enp6s0: no IPv6 Routers available
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): IP6 addrconf timed out or failed.
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 08 08:51:59 Ira-Lenovo su[587]: (to root) ira on pts/0
Jun 08 08:51:59 Ira-Lenovo su[587]: pam_unix(su:session): session opened for user root by ira(uid=1000)See https://bbs.archlinux.org/viewtopic.php?id=182030
Here's the change you recently applied: https://projects.archlinux.org/svntogit … 882c43178c. -
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD -
Problem typing info in Events in Iphoto version 9.5.1
I have an Imac Desktop and since day 1 when trying to type information in Events it takes for ever. I type a few letters and then stops and I have to start over.
I have an older MacBook and a older Iphoto version and I have no problems. In fact the older version 8.1.2, works so much better.Slideshows from albums do not play correctly if the photos are sorted manually. Sort them by any one of the other options, date, title, etc,, and it will play correctly.
However, one can create a slideshow from those manually orderd photos in iPhoto's slideshow mode and it will play correctly.
OT -
I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
iPhoto cannot be opened because of a problem.
Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.
Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
Thanks tons...Thanks Terence,
I did get it working finally...and your last advice was what I needed.
I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers. -
Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists making continued use of this browser very unlikely unless a quick solution is found! Can anyone help please?
Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
* [[Firefox hangs]]
Check and tell if its working. -
Since I have uploaded new version of IOS 7 I started to expirience freezing problems of my device. Could you show way of fixing thise problem?
Hello Baladadash,
Thank you for providing the details of the issue you are experiencing with your iPhone. It is definitely inconvenient and frustrating when you are not able to access your iPhone.
I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing):
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPhone before performing the restore:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M. -
DB and listner auto start with linux problem
Dear all :
i can't set DB auto start with linux
my db version 10g linux 5
I followed these steps :
edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
TSH1:/u01/app/oracle/oracle/product/10.2.0/db_1:Y
create a file called "/etc/init.d/dbora" as the root user, containing the following.
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
ORA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
esac
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dboraFollow this part of Oracle Doc,
Automating Shutdown and Startup
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref249
Also run your script manually see if it will run sucessfully.
/etc/init.d/dbora start
/etc/init.d/dbora stop -
Problem with auto start-stop script
Hi to All,
Logged as root. I have create in /etc/rc.d/init.d this file and saved as dbora (Oracle Linux 5.4):
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After creation I have execute:
*#chmod 750 /etc/rc.d/init.d/dbora*
*#chkconfig --add /etc/rc.d/init.d/dbora*
The last command return this message:
+"service dbora does not support chkconfig"+.
Can You help me? Have You an idea ?
Thank You and best regards
Gaetanosb92075 wrote:
Oracle RDBMS needs to be started by process running at OS level as owner of Oracle software; typically OS user "oracle" & not as ROOT!Ok,
But I have founded this script at [http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php].
The article report:
Article
When using RAC or ASM under Oracle 10g Release 2 or above, the Oracle Clusterware automatically starts and stops the Oracle database instances, so the following procedures are not necessary. For all other cases, you can use the methods described below.I must suppose, that the author has written an incorrect article?
Best Regards
Gaetano -
IPhoto version 9.4.3 update procedure is not responding.
Hi,
I have a problem concerning a normal software update. I have a MacBook Pro runnig OS X 10.8.3 (12D78).
Two days ago i got a normal message telling that there is an update available for a new verson of iPhoto (9.4.3)
Everything went as normal to the point when it had downloaded 1,12 GT / 1,12Gt. Since then has nothing happened. The update procedure has been frozen and now i don't have any access to my iPhoto because it says that IPhoto can not be opened while updating...
This has been going on now for two days and i wonder if there are any information available of this problem and if there are any solution to solve the problem.
For me it seems that there is a bug in the update procedure which courses the program freeze..
I would appreciate any information to solve the problem...Ok. Now I finally succeeded to update the iPhoto from a testaccount which i made for this purpose.
The updated iPhoto works fine also from my own account...
But the Launchpad on my own account still thinks that iPhoto must be udated. The size of the package on my side is bigger (1,12Gt) when it was on the testaccount side something about 750Mb..
I followed the instructions of Launchpad and it started to download the package. I interrupted the download and decited to ask your opinion... Should i continue the download or is there a way to reset the update..
What if it freezes again at the same point...
I checked the iPhoto version of my account and it is the latest and the same which was allready updated from the testaccount. -
Nokia 9500 - Bluetooth auto start!
The bluetooth on my Nokia 9500 auto starts from time to time even though is switched off in the Settings menu.
All Right Mobile Maniac.
I have seen another discussion re the log file problems with the same effects on the phone performance. I am wondering how many are bothered about this matter and how many report it. Most of us do not bother to waste time on a discussion board, but think on how quick to make the next buck... Most of us will return the phone to the shop, upgrade or chop it away and get a different model. It is only few of us who realy wonder why this thing happens or the other does not with a phone or anything else. I have not tried the 5-10 days time lenght for the log file, but I'll do it in the future and come back to the forum with the results. The firmware version of my phone is: v 05.22(01) 03-06-2005 RA-2. Is there an update? How do I update it?
Thanks,
Julian -
before itunes 9 I was able to set my iphone to auto start and not auto sync, now if auto sync is checked to turn it off, auto start is grayed out and my iphone will not start when plugged in? Does anyone know if this is a new feature for 9.0.1 or is it a bug?
"Secondly, I don't know how to get the SD version without paying for it a second time. Can you tell me how to do that?"
This is not part of the sync process at all. You import these as you would from any digital camera.
" I delete the music off my computer once I upload it to my portable devices to conserve memory."
Not a good idea. The iphone is not a storage device. It is meant to mirror the selected content on your computer. You are asking for problems if you delete the music from itunes.
"Is there a way to organize music without syncing?"
You can manually manage, but if the music is not in itunes you will likely run into problems at some point.
" If I change the settings to manually manage music and videos, will it delete all the photos and videos I currently have synced? "
It should not erase the photos and videos from your computer ( home videos and pics). It will erase the current itunes music and videos.
"If I go to manually manage will those videos on my camera roll get erased? "
No. Camera roll is not part of the sync process. It is temporary storage for vids/pics until you can import them to your computer.
"If I change to manually manage, will apps be manually managed too? How do you go about manually managing apps? "
I do not believe that you can manually manage apps.
Here is an article on Manually managing:
If I change to manually manage, will apps be manually managed too? How do you go about manually managing apps?
"Since the phone won’t be synced anymore, how do I do a back up and restore? What information does a back up save? How do I restore from that back up? "
Apps and music are not part of the backup. You can read about the backup here:
http://support.apple.com/kb/HT1414
"If I ever wanted to go back to syncing, will everything get erased again?
Yes.
Maybe you are looking for
-
Unable to Pass Parameters to I5Grid in SAP MII 14.0 SP05
Hi Experts, There was a bug in SAP MII 14.0 SP04 where we were unable to pass parameters to I5Grid dynamically. I understand that this bug has been fixed in SP05 , so we applied following patches: Patches installed : a) XMII05P_4-10008694.SCA b
-
How do I create an outline in illustrator?
Hello All, I am trying to create artwork for printing and I have been asked to save the document as an eps file. This is the file: I need the sbsgroup to be an outline and be transparent in the middle...how do I remove the blue from the background? I
-
Hi , I have problems to understand the create type command ! CREATE TYPE test_type AS OBJECT ( test_id_pk number, test_city varchar2(20), test_state varchar2(10), test_zip number Is this a kind of reference or what ? thank for any commets... marcel
-
The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!
-
Hi folks! I asked a question about "Deployment issues" last week, and since then I have only received 9 messages from the list, none of which answered my question. Is the question really that hard, or is everyone busy learning Java? ;-) Or is there s