IPhoto (version 9.5.1) screen doesn't display the source list, library etc

When I open iPhotos (version 9.5.1) for a few seconds the line along the top with iPhotos, view, etc. appears, as does the list at the left with albums etc.  Then both the top and left disappear and only the events show on the screen.  I can access the iPhoto line along the top buy putting the cursor at the very top, but can't access the info that should be at the left side of the screen.  Can anyone help?

Thank you... before I read your reply I plugged my iPad into the laptop to update the iPad and...wow...iPhotos was back the way it should be. 

Similar Messages

  • After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened.  The photo shows in the Navigator on the side panel, but not on the screen.  MFF

    After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

    No, that is the problem.  I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2.  The upgrade then required that the Library be upgraded.  Then CS2 stopped showing the photo when I opened CS2.  Maybe there was a system upgrade for the whole system, that went along with 9.2.  Before the upgrade CS2 worked.  I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock.  These photos were not on my computer when the Library was upgraded.  I even tried photos fresh from the camera. Elements 9 does work to open the photos.

  • Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    Since upgrading to Mavericks my iMac no longer recognizes my digital camera.  iPhoto will open, but my camera never appears in the source list or goes into import mode.  Help!

    I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected.  At least that happens with my camera.  Good luck.

  • IPhoto 9.6 doesn´t display any pictures from library, upgraded

    iPhoto 9.6 doesn´t display any pictures from library. I have upgraded from an old iPhoto. I upgraded the Library also.
    Everything is inside the Library I can see but when I run iPhoto I get only a yellow note on the screen and no pictures?

    Everything is inside the Library I can see
    Do you mean by looking into the library using the Finder?
    but when I run iPhoto I get only a yellow note on the screen and no pictures?
    Then iPhoto has probably opened a new, empty library, because it could not find or access your iPhoto library. What happens, whiny double-click the Library to open it directly?
    Where is your iPhoto library stored? Is it in the Pictures folder or on an external drive?

  • I cannot download photos from my digital camera to Iphoto (version '09). I have been able to successfully do this up to 4 days ago but not yesterday. My camera/device is recognized in the Source List but photos won't download for me to import to library.

    I cannot download photos from my digital camera (via a cable) to Iphoto (version '09). I have been able to do this successfully up til 4 days ago but not yesterday (Dec. 25th). My camera/device is recognized in the Source List, but when it tries to download the photos, all I get are the words "Loading Photos" in the area where the thumbnail pictures usually display. The little "gear" symbol next to the words but it just goes round and round. Nothing ever downloads, and instead of showing me how many pictures there are to import it just says "No photos". So therefore I cannot import the photos to my library since they won't even download.
    I was getting an error message a few days ago that my Iphoto library was getting full, so I emptied my trash in both Iphoto and on my computer. I had this same problem back in October and emptying the trash and getting rid of some photos did help (can I really be using that much storage space for the pictures?). But it didn't help this time.
    Any suggestions as to what to do to solve the problem? I would try taking the SD card out and inserting that into the slot on the computer to see if I could load pictures that way; but the last time I did that, they wouldn't load. Not sure if I lost pics from the disc or not.
    Thank you,
    Novice50

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • I dropped my iphone and the screen has blue lines on it. Siri still works but the screen doesn't but the screen isn't cracked or shattered. What should I do?

    I dropped my iphone and the screen has blue lines on it. Siri still works but the screen doesn't but the screen isn't cracked or shattered. What should I do?

    Bring your phone and $199 to the Apple store for an out of warranty exchange of your phone.  You clearly broke it when you dropped it.

  • TS1363 i need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    I need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    You need to do more research before you make purchases like this. You've wasted your money. The ONLY officially unlocked iPhone model sold in the US is the GSM model, and that model is only sold by Apple. That's the model iPhone you should have purchased.
    Did you read & understand my initial post? Especially this part:
    The unlocking of the GSM portion is just for International travel in order to use local sims. You still have to pay Sprint for the use of their international GSM partner’s network on a “pay as you go basis”.

  • TS3274 dropped ipad now screen doesn't display

    My daughter dropped her ipad and now the screen doesn't display anything.  We can see some light changes but nothing else.  It appears that the screen can still be touched to use apps because we are able to play music.  Any suggestions on what we should do?

    Not sure if you've fixed this, but it really works.  After reading similar advice, I banged it on the corner of my couch and the display totally came back clear as day.  Could not read it before.

  • After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app

    After update iOS 5.1 iPhone 4 camera on lock screen doesn't open the app

    Tonebox,
    I couldn't get my camera to work smoothly
    the 1st ten times,or so,I tried to open it.
    As it turns out,it isn't as pressure sensitive as I have
    grown accustomed to, and required a gesture that feels
    rather awkward, by comparison to the ones I have been using.

  • Keep getting pop up saying the Safari browser version you are currently using doesn't suppor the com. tool bar...help

    Keep getting a pop up saying the Safari browser version we are currently using doesn't support the community tool bar whenever we try to get on a site supported by Safari.

    safari "community toolbar" site:discussions.apple.com - Google Search

  • When i want to download the test version of CC, creative cloud doesn't find the file. Always search

    When i want to download the test version of CC, creative cloud doesn't find the file. Always searching, what do i do?

    Hi clemdef,
    Change your browser and try again. Please refer the kb: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html for download issues.
    You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html .
    Kindly follow the very important instructions before download.
    Regards,
    Romit Sinha

  • Re: my notebook doesn't display the red color

    I think I have the same or a similar problem.  I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
    Since updating the graphics driver last week I have noticed the colour red seems more pink or purple.  This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour.  I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
    I have attempted to rectify the problem by resetting the display settings to default.
    This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

    Hello @pittstop,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
    To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
    I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • IPhoto isn't displaying my source list

    When I launch iPhoto, only the menu bar on the top appears. To view the photos, I need to go to View and choose Full Screen. It used to automatically open up with the Source List down the left hand side which made it easier to sort through and organise my folders (albums, events etc). Now I need to toggle between Full Screen or no screen at all. What has happened??
    Thanks.

    Greetings Monica,
    While in iPhoto try going to Window > Zoom.
    If that doesn't fix the issue quit iPhoto and remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.iphoto (anything with this in the name)
    Home > Library > Preferences > com.apple.iphoto (anything with this in the name)
    Hope that helps!

  • Some browser doesn't display the MW page correctly

    after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
    The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
    The menu item is been streched out of the blue frame, they are no longer displayable
    any ideas?

    We have the same problem.
    And find it is caused by a combination of your screen resolution, font size and browser window size.
    The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
    After experiment with it, MW can display much better in our case.

  • Verify_function doesn't display the error messge in oracle forms

    We are planning to use the verify_function to validate the password when user password is expires.
    The users are using Forms 6i on web.
    When I set the profile to user verify_fucntion and then try to change the password with the default password change window , it doesn't display the error message if the crieteria doesn't match. Instead it just clears the screen. So the user doesn't get any idea what's going on.
    has anybody seen this. We are trying to utilize the default password change functionality instead of coding our own.....in forms
    Thanks,
    Dj

    It can be that the spry:content does not support the function::<syntax> or that your impelementation is wrong. You can try this:
    spry:content="function::FormatDate"
    Like you would implement the function statement in the spry:if statements.
    If that doesn't do the trick you need to modify the SpryData.js if you need this kind of support.

Maybe you are looking for