Iphoto will not play H.264 video: error message "The operation couldn't be completed. (OSStatus error -101.)" Any suggestions to fix?
Hi, I am on iphoto 11 version 9.2, Mac OS 10.7.5 using a macbook Pro 2.8Ghz Intel. All of a sudden I cannot play video (H.264) on iphoto. I get the message "The operation couldn’t be completed. (OSStatus error -101.)". I rebuilt the iphoto database and videos played once, since then, they will not play and I continue to get the error message, even if I rebuild the database.
Any thoughts or helpful suggestions from anyone gratefully received.
Hi Terence,
Thank you for your help.
My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
Thanks
Charles
Similar Messages
-
Error message: The operation couldn't be completed. (NSURLErrorDomain error -1012.)
I receive an alert from ITunes that there is an update available. When I go to the updates in ITunes I receive the following error message:
The operation couldn’t be completed. (NSURLErrorDomain error -1012.).Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Error message: The operation couldn't be completed. (OSStatus error -43.)
I've been using TeleChart 2000 for a couple of weeks with no problem. Then over the weekend it disappeared from my dock and wouldn't stay in the dock even though I selected "keep in dock." At least I could still open it by going to the "downloads" folder. Now today, when I tried to open it after using it earlier in the day, I got this message: The operation couldn’t be completed. (OSStatus error -43.)
Anyone know how to fix this?
MJI took a quick look at http://www.welovemacs.com/whdoalltherc.html which list many error codes, Error 43 appears to be a file not found error.
-
When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!
but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD -
Every time I try an update I keep getting the error message
"The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)."
Once I get this error message and try to update again, I get told there are no updates. I have to cancel the first attempted update and close all message windows before it lets me try again, and guess what, same error as above.
Is anyone else having this problem, or know how to fix it.
Not sure at the moment if this is an Apple related problem or a problem with my machine, but everything else worked ok, including an earlier update to iPhotoUse this link instead:
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg -
When I try to preview the book I get the message the operation couldn’t be completed. (com.apple.chameleon.pdfGenerate error 1)
No - you there is nothing more to explain - you boot into safe mode as described in the link in my post and try assembling the book while in safe mode - nothing more to it
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
When trying to install updates, I get this message:The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102). What does that mean?
It appears Apple’s download servers are ‘overwhelmed’ today. I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem.
What updates? Here is a link for iTunes which worked for me.
iiTunes 11.1.0 -
why cant i donwload my pics and videos with my iphone 4 using preview? It says
The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)The com.apple.ImageCaptureCore error may be a system issue. Try applying this updaters:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update
and then try again. Also try reformatting the memory card with the camera, take some test shots and try importing those photos. This is to rule out a card issue. -
The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)
The com.apple.ImageCaptureCore error may be a system issue. Try applying this updaters:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update
and then try again. Also try reformatting the memory card with the camera, take some test shots and try importing those photos. This is to rule out a card issue. -
The most recent update I have in the App Store is an OSX update but I receive this error message when I select the update button. (The operation couldn’t be completed. NSURLErrorDomain error -1012. -1012. Can anyone tell me why or how to delete this update in the que from the app center and try again? Any help would be greatly appreciated. Thanks.
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
There was an error creating your disk image. The operation couldn't be completed. (DSPPublishing error -1012)
I don't have a background image. I called Apple and they had no idea what that error number meant. I deleted preferences for FCPX still didn't work, then delted all preferences and set up a new user. It now works. Apple has no idea what is going on.
-
Would like to update my system software but I get this message everytime:
The operation couldn’t be completed. (NSURLErrorDomain error -1012.)(-1012)
Any ideas on what this is?There seems to be a trend here.
The operation couldn’t be completed. (NSURLErrorDomain error -1100.)
Any help Apple? I was having issues with other programs and figured I would update just in case.
Is an update for Mountain Lion coming out soon to fix the bugs I've been having? I have a brand new MBP (3 weeks old) and have had nothing but problems with Mountain Lion. -
I am not too computer literate..............
I took some videos of my daughter and went to view them on my computer (pc) and they will not play. The computer recongnizes them as quicktime files (.MOV) but when they are selected for playback, the screen is black and all that plays is the audio. I downloaded the latest quicktime pro at $30.00 and the problem still exsists. The video was taken on an iPhone 4s with the iOS6 updated software.
What is the problem? What is the fix?
ThanksThanks! Yours works. May I Add?
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Disable Direct3D acceleration in the player you are using.
If you use VLC media player, Go to preferences, Video, And under output, change from default to "Direct 2D video output"
If you use Quicktime, Downgrade to Quicktime 7.6 or upgrade to quicktime 7.7.3 and Go to
Edit --> Preferences -->Quicktime preferences.
Under that, go to advanced tab, and uncheck "Enable Direct3d acceleration" (3'rd box)
Fixed the problem for me
You're welcome
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ -
IPad videos will not play on Quicktime on my PC, the screen is black but there is sound. Any ideas?
I recorded videos on my ipad and wanted to edit on Quicktime Pro on windows, but all I have is sound no picture. The Quicktime software is is udated 7.7.2 & my Ipad is the latest version with ios6. I could play the videos on the iPad, obviously, but cannot see them on PC. I run Windows 7.
Thanks! Yours works. May I Add?
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Disable Direct3D acceleration in the player you are using.
If you use VLC media player, Go to preferences, Video, And under output, change from default to "Direct 2D video output"
If you use Quicktime, Downgrade to Quicktime 7.6 or upgrade to quicktime 7.7.3 and Go to
Edit --> Preferences -->Quicktime preferences.
Under that, go to advanced tab, and uncheck "Enable Direct3d acceleration" (3'rd box)
Fixed the problem for me
You're welcome
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ -
The operation couldn't be completed, OSStatus error -1
After leaving the Aperture app open for a day I get the above mentioned dialog box message and I need to force quit it. Once I started clicking on "OK" and it took 98 clicks to get the dialog boxes to finally disapear. Usually I don't have that much time. Internet works fine and Facebook works fine. Aperture version 3.4.3
What's going on?The OSStatus error -1 may indicate a network problem, even if your internet is working fine now. You may see these alert boxes, if Aperture cannot connect to Flickr or Facebook, when it awakes from sleep.
I'd disable the option "automatically check for newly published albums" in the "Web" preferences of Aperture.
This will prevent Aperture from trying to connect to Facebook, each time it wakes up.
Maybe you are looking for
-
Desktop Manager 6.10 (b034) & 7.0 won't open after install!!!
Hey, I run a windows 7 box that has run Desktop Software now without issues for about 3 years. All of a sudden, whenever I go to load it, the system tells me "it's encountered an error, closing program now" so I can't ever use the dam thing. I've re-
-
Any resolution to echoing iphone 4s?
Any resolution eching in the iphone 4s?
-
IN my global war game I cant buy anything for my army and I know I have 15 dollars credit. I have check. How do I buy when all it does is load. help
-
Detecting the State of Caps Lock
I have a rather interesting problem - to which so far there seems to be a surprising lack of information. I wish to determine the state of the CAPS LOCK key as well as the INSERT / OVERWRITE - and as I think these are pretty standard, there should be
-
Hi, in 10g, how can I see when a table was lastly updated ? thank you.