Iphoto will not print in color?

I cannot get iphoto to print in color, only black and white. Every other document or picture prints in color.
This just started.

How re you printing?
Wat color profile do the problem photos have?
LN

Similar Messages

HP Laserjet 300 Color MFP m375nw will not print in color

My HP Laserjet 300 Color MFP m375nw will not print in color. First it would not even print (has something to do with Google Chrome). I uninstalled the program and tried to reinstall the program but it will not complete the whole installation process. Says it has an error, took to long to run. But the Printer is in the DEVICE section, but not in the PROGRAMS on the Control Panel. When I go to print now, I press (Ctrl, Shift, P) and it will on print in Black no Color. If I go to print the normal why and select, I hit Print and then it ask to select a Printer and there is no Printer to select.

My HP Laserjet 300 Color MFP m375nw will not print in color. First it would not even print (has something to do with Google Chrome). I uninstalled the program and tried to reinstall the program but it will not complete the whole installation process. Says it has an error, took to long to run. But the Printer is in the DEVICE section, but not in the PROGRAMS on the Control Panel. When I go to print now, I press (Ctrl, Shift, P) and it will on print in Black no Color. If I go to print the normal why and select, I hit Print and then it ask to select a Printer and there is no Printer to select.

IPhoto will not print

IPhoto will not print at all and just hangs up. I can not even force quit it. I have two printers connected a HP envy 5532 and a Brother HL-2130 and both work fine with all other programmes.

Are you able to print successfully from other applications, say Preview?
Also as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?

Have a wireless printer and will not print in color, prints black

My wireless printer will not print in color, prints in black & white

Have you contacted the manufacturers support?
Clinton

OJ Pro 8625 will not print in color only shades of gray

Printer was purchased two days ago. The printer will not print in color only black and shades of gray. alignment test on 2/28/15 showed color. cartridges show full.

Hi there @ChuckHilde
Welcome to the HP Community
I saw your post about how you cannot print in color, and I would like to refer you to try the steps I previously recommended in another thread. The printer itself prints in color, therefor there is most likely settings on your Mac that need to be changed.
Click here to get to that thread and try the steps: Re: Printer Only Prints Pictures in Black & White
You should be able to print in color after those steps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My Photosmart C6280 will not print in color.

My Photosmart C6280 will not print in color.All ink levels are good. Factory defaults clicked. Did I override something without realizing it? I don't see anywhere to click for grayscale. I am using an APPLE AIR....I have also turned the printer off and on again..

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP B210e will not print in color.

My HP B210e will not print in color. It does not copy in color either. I have added all new cartridges and the levels read good. Any help with this will be much appreciated.

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photosmart c4780 will not print in color

Brand new to forums... I am using a MacBook Pro, OS 10.6.8. I recently bought a used photosmart c4780. The owner said it only prints black. When I set everything up, it wouldn't print at all, as the black ink was depleted. I replaced the black cartridge and now it prints. However, even though the color supply levels are at about half full, it will not print in colorI receive no error messages. Have tried different settings in the Print dialog options to no avail. Have not been able to find anything online that addresses this exact issue within the parameters as I've described them. Any help appreciated.

Hi tomanifest,
The document at the link below will assist you with the warranty end date of you color cartridge.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00206040&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

MY printer will not print in color

My laptop and printer are only printing in black and white will not print in color. I have tried printing with a different laptop and it printed the pictures in color.
Can you please help !
Regards,
Aido2014

Hi there @Aido2014 ,
Welcome to the Community!
I read your post about one of your computers will only print black and white, and not in color. I am writing you back to make my suggestion to you.
I would suggest trying these steps to hopefully get the color printing again: Fixing Print Quality Problems for the HP Deskjet 3050A (J611) All-in-One Printer Series
If everything appears to work fine from that guide, and you still cannot print in color, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Please keep me posted with your results and I will help out some more if needed!
Have an awesome Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

TS3147 My HP printers will not print in color.

My MacBook will not print in color either with my old HP 6122 or my HPEnvy 120. Any solutions?

Hey Sarah24,
Thank you for the information. From this it sounds as though the issue is with the preference files for the printer are taking over. There are some long steps that need to be taken.
To start off, you will need to reset the printing system of the Mac. Now if you have more than one printer, you can skip this step. If you only have the one printer, I have included the document 'OS X Mavericks: Reset the printing system' http://bit.ly/1bS2qrh.
After this you will need to uninstall the software. Again if you have more than one HP printer installed, please just go with the normal uninstall. If you only have the one HP printer, to do a full uninstall of the software, please follow the steps below.
1. Open the HP folder in the Application folder
2. Open up the HP uninstaller
3. On the page that has you click the uninstall button. Hold Control, Option, and Command, then click uninstall. NOTE: if you have more than one HP printer just click uninstall, without holding down the three keys.
4. Follow through the rest of the uninstall
The next step needs to be done either way. This step is the verify and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions' http://bit.ly/1bjFnnP. After the repair of the permissions has been completed, please restart the Mac.
Once the restart has completed, you will need to reinstall the software. I have included the link to 'HP ENVY 120 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks' http://bit.ly/1emTqaj. Please make sure that you either choose recommended install, or all the extra features, such as scanning.
Now once you have the software successfully installed, please click on the Apple Icon, and then on Software Update. Please install all updates that are available to you.
Please let me know the outcome of the troubleshooting.
Thank you.

Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

Thank you, yes this solved my problem...

IPhoto will not print a photo on Epson DX7450

I have a client who has a new iMac that originally ran Tiger and printed photos in iPhoto '08 using an Epson DX7450 multi function printer - all was just fine. Recently, they upgraded to Leopard and now running 10.5.5; sadly now photos in iPhoto will not print - other programs are not affected, just iPhoto. The Epson has the latest drivers and Epson suggest that the issue lies with iPhoto. Any suggestions welcome please. They do not want to use a different photo library application!

Welcome to the Apple Discussions. First try the easy fix: close iPhoto, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if that helps.
Next, if necessary, log into another account on the Mac, create a new library if necessary, import a picture and see if you can print from there. If not then a reinstall of iPhoto seems warranted. In that case you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder.
If iPhoto prints OK in the other account then the problem is with your primary account. It could be a preference file other than iPhoto's. Here's how to determine if that's the case:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Iphoto will not open only color wheel shows how can i open it.

My iphoto will not open only the color wheel pops up, how can I open my iphoto?

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

HP Envy 5660 Will Not Print in Color from Desktop

I have a new Envy 5660 e all in one printer. Prints in color from my I phone and I pad but will only print in black from desktop running OSX 10.6.8. No error messages just will not print color from my Mac.

Hello @zeitman , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues printing color. I would like to try and assist.
Due to system limitations, the printer requires a minimum of 10.7 to be installed. You can, however, download and install the Mac print software relating to HP. This should allow you to have functionality:
HP Printer Drivers v3.0 for OS X
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP ENVY 7640 Will Not Print In Color On A Mac

I purchased an HP Envy 7640,I'm running 10.6.8 on my Macbook pro, I can't install the driver for the printer on my computer because it says that it is not compatible. Nevertheless I am able to print, but it will not pint in color. Is there any solutions that I can try?There are no

Hi MrsLoghouse,
I would like to help you print from Word on your Mac. Because you can print from other programs, I trust the issue is not actually related to the HP Printer. Damaged documents or documents that contain damaged graphics or damaged fonts can cause print errors. Before you reinstall drivers or software, test the program's ability to print.
1. Open a new blank document in Word.
2. On the first line of the document, type the following text: =rand(10)
3. Press ENTER. This inserts 10 paragraphs of sample text.
4. Try to print the document.
5. If the document prints successfully, change to a different font, or insert clip art, a table, or a drawing object. How to troubleshoot print failures in Word for Mac, Excel for Mac or Powerpoint for Mac.
If the issue persists, I suggest you contact Microsoft, or reach out to the Microsoft Community.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Iphoto will not print in color?

Similar Messages

Maybe you are looking for