IPhoto won't connect to my cameras after Lion upgrade

After upgrading to Lion and iPhoto 11, none of my cameras are recognized by iPhoto and don't automatically open when connected.  Need help!

No.
The problem seems that the cameras are not recognized on the USB port at all.  I have three cameras that worked immediately before I upgraded to Lion and now none work  -- meaning when I plug them into the USB port iPhoto does not recognize them.

Similar Messages

  • IPhoto won't delete photos from camera after importing. It used to....

    Hello...anybody have any thoughts on this issue? I always check the 'delete after importing' option when connecting camera and importing new photos. Recently, the photos have remained on the camera and I have to delete pictures from my camera manually instead of iPhoto doing this. It seems that after I upgraded to OS X 10.5 I noticed this issue. Needless to say if I forget to delete from the camera, iPhoto wants to import the old photos when I have new pics to import. Thanks for any help.
    Camera is an Olympus SLR.

    MG911
    Welcome to the Apple Discussions.
    We've seen occasional reports of this with 10.5. Start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    That said, experienced users do not recommend letting iPhoto delete the pics from your card. If there has been a problem with the transfer you won't know about it until after the erase is complete. It's a couple of seconds work to reformat the card using your camera.
    Regards
    TD

  • Mac mini cannot connect Onkyo TX-SR806 after Lion upgrade

    Hi,
    I've bought the Mini in 2011 and connect via HDMI to an Onkyo TX-SR806. The Onkyo receiver does the connection to the TV. Everything was working fine until the Lion upgrade. Then the Monitor setting for the Onkyo vanished (sound is also dead). I can connect to my Samsung TV, but the sound is poor this way. I wrote an automator script to force the System settings check, but this makes the monitor flicker and go blank again. The recent Lion upgrade with the HDMI didn't improve the situation. Does anyone know about the problem?
    Ciao, Gerald 

    Ive got a similar issue however i can connect but can't download on AppStore and iTunes i can connect but my download screen is frozen and its forcing me to download certain titles I've already downloaded!!!!!
    useless

  • I cannot connect to the Internet after Lion upgrade

    I'm having a similar problem to some other threads.  After upgrading to Lion I cannot access the Internet wirelessly through my Airport base station.  All other Macs in the house are working fine.  Per the other threads:
    - I do not have Avast installed
    - I have tried trashing the System Configuration in Preferences
    - I have tried creating new locations
    - I tried enabling "Auto Proxy Discovery" and "Automatic Proxy Configuration" in Network Preferences.
    None of this has worked.  Here is the message I get in Safari:
    "The operation couldn't be completed.  Operation not permitted."  (NSPOSIXErrorDomain:1)
    I previously was getting a kernel panic after startup when I did the upgrade.  But I was able to narrow it down to Intego Content Barrier which I deleted.  I then reinstalled Lion and the system seems stable.  Just can't get the Internet to work.
    Any other ideas or thoughts on this?
    Thanks!
    David

    Don't think Airport is around in Lion
    Select Advanced,  pictures are in wrong order and I was tired of fighting with it.

  • "Connect to Server" SLOOOOW after Lion upgrade?

    As the title says, since my Lion update it now takes up to 30 seconds to mount/connect to my local server (no changes to the server), whereas when my machines were running Tiger (2004 G5) and Snow Leopard (2011 MacBook Pro), it was a near instananeous connection.
    What gives? Any tips??
    Thanks!

    I don't know what the ISP would have to do with it...
    1. The initial connection lag was with local network access.
    and
    2, The problem only surfaced the minute I upgraded to Lion OS. Two different earlier OS's were fine. And a third user, likely running Snow Leopard reported no problems accessing the server over the internet (from a different ISP).
    Seems pretty clear it's a Lion issue to me... somehow requiring IPv6 to do it's thang.
    PS. I didn't mention this before, and I don't know what it has do with anything, but the server is an old G4 unit running Leopard.
    At any rate, I woke up the computer this morning and was able to connect to the server instantly. So far so good...

  • My camera connection kit stopped working after I upgraded to  ios5

    My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
    I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
    Any suggestions?

    Actually this sounds the same problem I have on my iPad2.
    I use a cheap copy of the CCK which I got off eBay.
    It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
    Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
    I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

  • IPhoto won't download photos from camera.

    iPhoto won't download photos from camera. iMac 10.6.8; iPhoto updated. No Name comes up, says "downloading," but color wheel only goes round and round. I've let it go on for 20" to no avail. Only way to get out of iPhoto then is to Force Quit. Tried downloading pictures through a Card Reader with same results.
    Same camera, same procedure for last 5 years and never had this problem. Thanks for any advice.

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder:
    User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • IPhone 6 won't connect to cell data after leaving wifi

    iPhone 6 won't connect to cell data after leaving wifi signal.  Need to reboot or go into airplane mode.  My area has LTE, but iPhone hasn't connected to that ever.  I'm thinking bad antenna or is this a cell provider problem.  I'm on AT&T.

    Hi, guanavera.  
    Thank you for visiting Apple Support Communities.
    I would recommend trying the steps in the article below when experiencing this issue.
    If you see No Service in the status bar of your iPhone or iPad
    http://support.apple.com/kb/ts4429
    You may also want to take a look at the information in the link below.
    iOS 8.0.2 
    http://support.apple.com/kb/DL1758
    Cheers,
    Jason H.

  • IPod touch 5th generation won't connect to the tv after doing up grade

    iPod 5th generation won't connect to the tv after doing an software update. Get an error message (this accessory is Not Supported by iPod touch) please help me with this

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why won't my Mac Pro sleep after Lion is installed?

    Why won't my Mac Pro sleep after Lion is installed?

    Tell us, what hardware add ons?
    old software? that required PowerPC/Rosetta maybe.
    Look for any apps, process that used powerpc and look for updates, check out RoaringApps for a table of Lion compatible programs
    does it happen iwth a clean install?
    how about if you do a Safe Boot?

  • Preview issue. Send to iPhoto option is grayed out after Lion upgrade

    Preview issue. Send to iPhoto option is greyed out after Lion upgrade.
    In Snow Leopard it was an option to send pics from Preview to iPhoto, but now it is greyed out if I right-click on the pic. I have searced and tried everything, but I cannot fix it, so does anyone have a fix for it? Please :-)

    I can offer no help but would also like to see this issue resolved.  Firstly, it would be useful to know if this problem is seen by everyone.  When viewing photos in Preview, with thumbnails in the sidebar, right-clicking on any of the thumbnails results in this:
    Prior to the upgrade to Lion, "Send to iPhoto" was not greyed out and worked as expected.

  • IPhoto won't open and is asking me to upgrade Aperture (for $80). I've never purchased or used Aperture. How to I get around this?

    iPhoto won't open and is asking me to upgrade Aperture (for $80). I have never purchased or used Aperture. Does anyone know why this is happening and how I can get past this so that I can just use iPhoto?
    Thanks.

    Can you give us the exact error message you get?

  • After lion upgrade time capsule no longer backs up

    Time capsule no longer will back up after lion upgrade is anyone else having this problem?

    The Time Machine application is part of the Lion operating system, so you will likely get a faster and more informed response if you post in the Lion support area for Time Machine. There are a number of posts there with issues similar to yours.
    Mac OS X v10.7 Lion
    Click on the Refine This List button under the Lion and then click on Time Machine to get to the support area.

  • Safari Crashes on Opening after Lion upgrade!

    I just upgraded to Lion, and I try to open Safari, but it crashes before it loads my homepage!
    I had recently set my default browser to Chrome in Snow Leopard the other day pre-upgrade, could that have something to do with it?

    I'm using SL and found the perfect solution. 1) Follow oh_okay 's instructions, 2) download and reinstall Lastpass, 3) Restart Safari 5.1 and all should work fine. With this lastest update to Safari Lastpass functions a bit differently, having it's own tool bar with the option to hide. You have to click on the grey star, which stays grey, when logged in. There may be a tweek for that, which I haven't gotten to yet.
    oh_okay 
    Level 1 (0 points)
    Re: Safari Crashes on Opening after Lion upgrade! 
    Jul 20, 2011 10:31 PM (in response to Amgreen)
    I've actually just found a solution.
    As it turns out, LastPass was causing my crashes, too.
    I had to find my SIMBL folder (~Library/Application Support/SIMBL/Plugins/LastPass.bundle) and remove the LastPass plugin.
    After that, all was well. Not sure if I need to reinstall LastPass now or just pay for (what I've heard is the far superior) 1Password.

Maybe you are looking for

  • Run more than one application at once?

    I�m trying to run two projects at once using the play button in JSE. The two projects workes together so I want to test them simultaniously. How can I start the two server instancies on different ports?

  • How much does it cost to replace the home button

    My ipad mini is out of warranty. Any ideas how much it may cost to repair the home button at the Apple Store?

  • Where in the MIDlet life-cycle should I create multiple forms with LWUIT ?

    Hi all, I must create two LWUIT forms in my application. Where should I create the two forms ? I created the first form in the startApp life-cycle method , and when I tried to create also the second form in the startApp method then there is a NullPoi

  • Interpreting Trace files

    Hi everybody, I need to know how to read and interpret information from a trace file . Is there any third party utility to convert all the information into readable text format so that it can be easily understood. Please help Altaf

  • Spinning beach ball on yosemite

    iMac gets spinning beach ball every so often. I must wait for about 5 minutes to get back control. HD only half full. Plenty of RAM. Activity monitor doesn't show high usage of CPU or RAM when beach ball spins. Please help.