Iphoto won't start ( activly ) when i trying to sync from iphone to imac

iphoto starts only on background when i want to charge and sync my iphone to the imac and if you click f3 it appears but if you click import al iphoto disappears again to the background so i can't upload fotos

Yes, I'm running ESET NOD32. I've disabled NOD temporarily but it still hangs on Calanders when syncing! Any ideas?
Many thanks. There's a couple of alternatives.
Either try the procedure in Samoreen's post:
Re: iTunes 11.1.4.62 freezes while syncing with Outlook
Or, see if you can get hold of the Eset beta addressing the problem. As Samoreen notes in another post:
ESET have a workaround for this issue. They gave me access to a test version of the HIPS module and this fixed the problem. So I could re-enable the ESET_OPTIONS environment variable (although I still consider that it's a questionable idea). I upgraded to iTunes 11.1.5.5 and there was no problem.
So maybe you should get in touch with ESET support and request the new module ? Just send a message to Marcos in the ESET forum.
Re: Outlook 2013 Calendar Sync fails with new iTunes 11.1.5.5

Similar Messages

  • When I trying to sync the Iphone Itunes show me message about error 0x009bd33

    When I trying to sync my Iphone, Itunes shome message about error 0x009bd33
    Help Please

    downgrading the iOS is not supported and therefore cannot be discussed in this forum.  You'll need to go elsewhere for support.

  • I updated itunes but when i tried to sync my iphone 4 to itunes i dont see my phone on there please someone help me

    hi i tried to sync my iphone to my itunes after the update but i dont see my phone on there and the sync thing is grey what do i do if its not showing

    Well, you don't say what computer OS you are using, so here are the support documents for both.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • Iphoto won´t recognise photos I am trying to download from my Canon 50D

    Hi,
    I have been using iphoto and downloading photos with no problem, with both a card reader and direct from my Canon 30D. I recently purchased a 50D and I installed the Canon software to take a look and see what it was like. I downloaded a few photos...fine. PROBLEM is when I tried to go back to using iphoto to download and store photos... message comes up saying ´download failed... files not recognised´ PLEASE HELP!
    I have tried restarting the mac plus I´ve uninstalled the Canon software (I think)..
    Thank you so much.

    bsoutas wrote:
    I also just purchased a 50D. I had around 200 pics to upload (all jpeg - none raw), it uploaded all but the last 12, then iphoto told me it couldn't recognize the as well. So frustrating! I would like any ideas as well. Thanks!
    Well I know this is one of those "drop back ten yards and punt" type suggestions but have you tried repairing your permissions on your boot drive? Especially if you have done several updates recently.
    Patrick

  • My music disappeared while trying to sync from iPhone to Mac??

    I recently got a new Macbook Pro so I tried syncing all the songs from my iPhone to the laptop, however, when I tried doing that nearly all of my songs disappeared from my phone and didn't appear on the Mac at all... I had 1,500+ songs on my phone and that has gone down to 327 and I still only have like 14 songs on my iTunes on my Mac. I have another laptop with all of my songs on it so will I be able to get them back on my phone?
    Also, will home sharing work for transferring the songs from my other laptop to my Mac because they use different apple ID's..

    Please see this:
    MacMuse: Computer Crashed
    Follow the directions carefully!

  • I updated my itunes but when i tried to sync my iphone 4 it tells me the apple mobile device service is not started. What have I done wrong?

    my phone won't sync with my itunes. Itunes doesn't even recognize that my phone is connected

    Starting Apple Mobile Device Service: http://support.apple.com/kb/TS1567

  • My calendar is one day out when synced from iPhone to imac

    I have an iPhone 5s.  I have just bought an iMac 21.5inch. 
    When I connected my iPhone to the iMac to sync it, the calendar events all came over, but they are one day behind.
    I am very new to iMac.
    If anyone has a suggestion - I would really appreciate it.
    Thanks

    Hi ellie,
    Welcome to the Support Communities!  If your iPhone's calendar events are one day behind when synced to your iMac, check the date and time settings on both devices.  Here's how:
    iOS: Troubleshooting issues with date and time - Apple Support
    http://support.apple.com/en-is/HT203483
    Ensure that the version of iOS on your device is up to date.
    If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
    Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
    If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
    Note: The option to set automatically might not be available on all carriers in all countries. 
    Learn more
    Note: If you find that your device's time is incorrect after you sync with your computer, your computer's time may be incorrect. Verify the computer's time in System Preferences > Date & Time (you may want to select the checkbox to set the computer's date and time automatically). 
    Hope you are enjoying the holidays ...
    - Judy

  • IPhoto won't start up

    Okay, I opened up iPhoto after installing the latest update (6.0.2) and now iPhoto won't start up. I tried reinstalling from the iLife 06' DVD, and it still won't work.
    (By the way, I'm using Front Row enabler, if that helps at all)

    Hi patricia,
    " Unable to upgrade this library because the current user does not have access"
    -First make sure your Pictures folder has the correct permissions for you, the user. Do this by highlightling the Pictures folder, hit Command i to bring up the info pane.
    Make sure you are the owner and have read and write permissions. Click the button at the bottom of the window.
    -If your problem is a locked file/files follow the info in the following Apple kb
    http://docs.info.apple.com/article.html?artnum=303232
    If all this fails you might want to try BatCHmode.
    http://www.macchampion.com/arbysoft/

  • How can i sync my iphone with itnes on a new pc.  when i tried to sync it said it will erase the contents on my iphone to sync with the new pc which has no contents

    my old pc was running low in memory and i don't have enough space to back up in order to instal iOS5.  so i got a new pc, installed itunes on it but when i tried to sync my iphone on the new pc, it said it'll erase all contents on my iphone and sync with the new pc which has no contents. it says iphone can only sync with one machine. 
    can you pls help

    Syncing to a new iTunes library or computer will erase your phone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    You can also back up iTunes and restore it on your new computer How to back up your media in iTunes , but the iPhone will be erased anyway during the first sync.

  • Iphoto won't start. photo won't start because I need Library Upgrader? where can I get I as don't have the original disc.

    iphoto won't start because I need Library Upgrader? where can I get I as don't have the original disc.

    Sounds like you have a damaged library7  To check launch iPhoto with the Option key held down and try to create a test library. If you can import a few photos.  If that works then your original library is damaged so make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
    Select the options identified in the screenshot. 
    Fix #3
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • IPhoto won't start (Missed theme font)

    This is my first Apple experience at all and I'm enjoying it, but I have encountered a problem.
    iphoto won't start, it just says: "The font required to run this application is missing"
    I'm in Mavericks 10.9.3, fresh installation with few programs, I never touched any fonts or anything in font book.
    I tried to reinstall with no luck ... so I don't know which is the problem.
    Here just few lines of error log:
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'System font path not found in bundle at path: /Applications/iPhoto.app/Contents/Frameworks/ProKit.framework'
    abort() called
    terminating with uncaught exception of type NSException
    No problem so far with imovie, just iphoto let me go crazy.
    Any idea to solve the issue?

    Open FontBook. It's in your Applications folder.
    From the FontBook menu bar click File > Restore Standard Fonts
    Restart your Mac then try iPhoto.

  • My Apple TV won't start. When turned on it shows an Apple TV box with a cord leading to but not connected to an iTunes icon

    MMy Apple TV won't start.  When turned on it shows an apple TV box with a cord leading to an iTunes icon. I have tried unplugging  still get the same message. Our electricity was off a few days ago. Could the HDMI cord be bad?

    It's not the HDMI cable.
    If you had a power surge, your Apple TV probably just needs to be restored.  That logo means you need to plug it into a computer with iTunes installed to restore the device to factory settings.  You'll need a micro-USB cable to do so.  Plug the usb into the apple tv in the micro-USB slot, then into the computer with iTunes already opened.  A screen will appear in iTunes with a button to restore the device. 
    If you don't have the appropriate cable on hand you can make an appointment at an Apple Store and they'll restore it for you.  Just go to locate.apple.com to find the closest location and make an appointment.  Keep in mind if you can't or don't go to an Apple Store a private repair place may charge for this service.

  • I'm trying to sync my iphone in IPhoto. I get this message "our MobileMe account information is not correct. The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there.  Help please.

    I'm trying to sync my iphone in IPhoto. I get this message "your MobileMe account information is not correct". "The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there.  Help please.

    Mobile me has been discontinued for over a year.  What system  and iPhoto versions are you running?
    How are you trying to sync?  With Photo Stream or thru iTunes?
    Do you have an iCloud preference pane in your System preferences?
    Do you meet the minimum requirements for iCloud and Photo Stream?
    iCloud: System requirements
    iCloud: Photo Stream FAQ
    OT

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    OK, fixed it.  Found that iPhoto is now BACK in the App store.
    Found iPhoto app in Finder and dragged it to Trash.
    Downloaded iPhoto from App store and all now back working again.
    Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
    Nige

Maybe you are looking for

  • Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

    I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation. Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an er

  • Share microsoft office documents not saving on all users

    Set up new user account for my wife shared my "desktop" where regular microsoft excel and word documents we use are saved Wife's account can access documents and save, but when testing and i try on my user, the file alterations have not been done. I

  • Video on the web for podcasting or streaming

    do any on know what I can do to get the right combo. in Compressor to get my video file size down but still look as good as apples macTV Show #70 - ‘Front Row’ Demo podcast in itunes. I also have quick time pro. I see H.264 in the movie info twice wh

  • Missing parts and production storage location

    Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is

  • What it does

    Q1. getContentPane().setLayout( new BoxLayout( getContentPane(), BoxLayout.Y_AXIS ) );Look , in this code there are 2 times getContentPane() has been called. who refers to whom ? the code extends a JFrame. Q2. what is the job of Glue in BOX class. do