Iphoto wont let me print until a theme is chosen , have no idea what its talking about. help

Iphoto will not let me print my pictures, A pop up come up Choose a theme  What is this?

Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD

Similar Messages

  • Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.

    Help, i am trying to print my JPEG file that i created in photoshop at a photo lab but it is coming out like an X-ray. I have printed these files before so i have no idea what i am doing wrong.
    Could it be something i have done in my settings?
    or when i am saving the file to JPEG?

    Basically you're approaching this the wrong way around. What you need is the extreme sections to be quieter, not louder. The problem with moving the lower end of the audio is that you'll move the noise floor too, and get what's generally referred to as a 'pumping' effect. So what you do is to use a compressor to tame the peaks, and leave the lower level sound alone. When you've done that, you amplify (or normalize to a level you can determine) the whole signal. So the noise floor will be higher, but constant and not pumping. 'Match Volume' is a completely different tool for setting the overall levels of different tracks so that they sound approximately the same - it doesn't even begin to do what you want.
    If it's music you are treating, then I'd almost certainly use the multiband compressor, because you get less artefacts with this. You need to experiment with the threshold levels, and almost certainly not use a massive compression ratio - 3:1 or 4:1 should be sufficient (although it's hard to tell without actually hearing the audio). You can tell what it's doing at any given point because the downward meter indicates how hard it's working. In theory you can apply make-up gain with it as well, but personally I leave that until everything's treated and use the 'Normalize' tool to set an absolute max level.

  • Iphoto wont let me edit info

    Iphoto wont let me edit info

    Iphoto'11 Version 9.4.2
    OS X Mountain Lion (10.8.3)
    My iphoto library is corrupted according to the error message.
    I have tried to restore my iphoto library by deleting the iphoto library and copy it back from my timemachine, but the problem remains.
    It just happened today.
    I can scroll my photo, use "edit" function and others fairly well. But when I try to click "info" the iphoto will shut itself down immediately and show error message that says my library is corrupted.
    I have tried rebuild the database. But the problem persists.

  • I just downloaded IOS 7 but it wont let me login to my apple ID for imessasge or Facetime what should i do?

    I just downloaded IOS 7 but it wont let me login to my apple ID for imessasge or Facetime what should i do?

    Try resetting ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears
    Then try again.

  • I have 2 ipads and my iphon on the same icloud account and it wont let me back it up cause i dont have enough space so I want to move my iphone over to a new icloud account i made with a new apple id but i dont want to delet the ipads off their account?

    I have 2 ipads and my iphone on the same icloud account and it wont let me back it up cause I dont have enough space. So I want to move my iphone over to a new icloud account with my new apple id that i made but i dont want to delete the ipads off the old account just move the iphone to the new one. How do I do that I despreatly need help!!!

    To migrate your phone to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll.  If you are syncing notes with iCloud that you want to keep on the phone, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account.  Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your other devices won't be effected by this), provide the password to turn off Find My iPhone (if using iOS 7) and choose Keep on My iPhone when prompted .  Then sign back in with your new Apple ID to create your new account and choose Merge to upload your data to the new account.

  • My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

    My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

    I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!

  • I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
    (125734)

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info how can i activate it

    I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info and I do not know how to get in touch with him I have had third gen ipods and never had any problums like this before Help!!!

    Either get the Apple ID and password from him to activate the iPod
    iCloud: Find My iPhone Activation Lock in iOS 7
    or have him remote remove the device from his account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    or return it for a refund.
    Otherwise you have an expensive, thin brick

  • I don't know how to setup FF to open in last session of windows wont let me save current sessions like it used to ask me fairly disappointing can you help m? Phil

    Question
    i don't know how to setup FF to open in last session of windows wont let me save current sessions like it used to ask me fairly disappointing can you help m? Phil

    ''want FF to open in last session of windows -- won't ask me if I want to save current sessions like it before''
    '''You can still have the old messages''', to make sure you get your tabs restored immediately, but with or without the messages and whichever way you respond to the message you can still get back your previous session through the History menu. (see item #31 "tabslost")
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
    You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • My itunes want let me download free apps its talking about my billing information!

    My itunes want let me download free apps its talking about my billing information why?

    Hello Deangelo,
    Thank you for the question.  It sounds like you do not want to add a credit card to your Apple ID.
    I suggest updating your billing information to "None" using the steps in the section titled "Change your payment information on an iPhone, iPad, or iPod touch" in the following article:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    If you are not seeing the "None" option when updating your billing information, I recommend the following article:
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/ts5366
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

    all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

    Okay, that's got one thing ruled out at least.
    Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
    In your Start menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try launching iTunes. Does it open this time?

  • Why can't i print a pdf file, it's asking for a password and i have no idea what it is it's never asked me before?

    why can't I print a pdf file, it's asking for a password and I have no idea what it is it never asked for one before?

    Good afternoon SaraThanks for responding. Yes, I have been able to open these files before without a password. Funny thing is it is happening on both my husband's laptop as well as mine. I'd appreciate any help you could give me but the file is very personal. So, if you can assist in a way that won't compromise the security I would be grateful for your help.Thanks and have a great day!Kim Morse 

  • Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

    Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • I have an old MacBook Pro, which just upgraded to OS X 10.10.3...in the process iPhoto disappeared, along with all my photos! I'm shocked, and have no idea what to do (furthest thing from a techie). Help??

    I have an old MacBook Pro, which just upgraded to OS X 10.10.3...in the process iPhoto disappeared, along with all my photos! I'm shocked, and have no idea what to do (I'm the furthest thing from tech). Did the photos go into iCloud? I have a photos icon now in the place of iPhoto, but no photos! Any suggestions or help?

    Niel, thank you! Can't get iPhotos, but found my photos after clicking "photos" in the new app, after your suggestion. (option, click). Whew! I panicked, and appreciate your help. I'm going to miss my old iPhoto!

Maybe you are looking for

  • How to make a sortable column in a table to do a case insensitive sort ?

    Hi : I am using Jdeveloper Studio Edition Version 11.1.1.1.0 and my table columns are sortable but i want to make sure that it case insensitive sort ,for example if i have following column values : abc,def,ABC,ghi Sorted results should not be likes t

  • I need the procedure to run daily but any specific time. can this be possib

    via dbms_scheduler.. Idea is I can easily set dbms_scheduler to freq = dailiy But the timing is also set.. What if the server is down ..at that time..and i need the procedure to run the moment the pc is started but it has to run only once.. so is the

  • ODI Integration - Hyperion Planning inbound to GL

    ODImates, I am designing a full integration (2 way-sided) from EBS-GL to Hyperion Planning and Hyperion Planning back to EBS-GL. The first side is almost finished, I extract the information from GL and create the specific format used by OTL Loader to

  • Oracle Content Management

    Hi, After installaing oracle 10gR3 content server on Linux redhat 4, can not get to admin server page: THis is the error meesage when typing in the URL: http://hostname:4440/idc Network message format error. Unable to parse browser environment or con

  • Pages 4.1 slow under Lion

    My wife has a newish 27" iMac, loads of memory, just updated to Lion and Pages 4.1. She dragged me into her office to show how slow Pages 4.1 is while typing in a document that has graphics, about 1/2 second to render each character. Same behavior wi