Iphoto wont open. Message reads "you can't open the application. It might be damaged....
I get a message :- You can't open the application IPhoto because it may be damaged or incomplete. Any ideas??
Installing iDVD shouldn't affect iPhoto. I still have iDVD on my machine and it runs just fine!
Hmm....
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display
Similar Messages
-
Just purchased a new mac with Mountain Lion installed. My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.
First try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does then make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
Does anyone know how to fix this problem?you probably have an incomplete/corrupt download.
to confirm check the file size against the expected file size.
then re-download perhaps with a different browser.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Transfered photos from IMac with Iphoto 9 to a mac book with Iphoto 11 now Iphoto 09 errors out saying "You can’t open your current photo library using this version of iPhoto.You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." We have not updated or changed anything on the IMac all we did is transfer photos. Any help would be appreciated.
LarryHN is correct. The only way this message occurs is if the iPhoto Library database is upgraded to a newer version.
You could try holding SHIFT-OPT-COMMAND when launching iPhoto from the dock and checking only "Rebuild the iPhoto Library Database from automatic backup" and hope it restores the previous database prior to the upgrade.
If that doesn't work, you can install iPhoto '11 on your iPhoto '09 computer. If I understood the iPhoto '11 Mac App License agreeement correctly, you can install it on any personal, non-commerical computer you own running 10.5, 10.6 and 10.7. -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?
I am having the exact same problem. MacForums has been helping me, and I called Apple. After trying everyone's suggestions, and Apple's, no success.
My App Store app still says "incomplete or damaged." There is even a circle with a line through it on the icon. Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion). Did not work. I also updated the software from "Software Update". Rebooted.
I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was. I wonder if the person above who had the same problem also installed a SSD?
Anyway, anymore ideas? Even Apple is stumped.
(In answer to the other post above, my Quicktime works fine.)
Message was edited by: mrivmriv
Just did some more reading. I was going by the icon in the dock. When I checked in Finder, there it was, fixed and brand new!! Thanks, anyway.
Message was edited by: mrivmriv -
When installing software for epson v700 photo a message says "You can't open the application mac os x because PowerPC applications are no longer supported. Is there a way of overcoming this obstacle?
Is there a way of overcoming this obstacle?
No. PowerPC apps will not run on Mac OS X Lion. There is no way to get around it. -
Why am I getting the following error message? "You can’t open the application “Microsoft Word” because PowerPC applications are no longer supported." I never used to have a proble!
Only Office for Mac 2008 and 2011 will run on Mavericks. Microsoft support for the former package ended in April 2013. If you do not want to spend the money, you might download and try the donation-ware (free) LibreOffice Suite. No ribbon bar crap. Supports about any document created on Windows.
-
my iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete., my iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete.
Back up all data. Delete the iPhoto application and download it again from the App Store.
-
I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problemSome of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
▹ Restart
from the menu bar. -
? Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no longer supported". I don't have a Power PC on either machine and this App does run on the older machine with an Intel processor. benrusy
This is not new. The fact that Mac OS no longer supports PowerPC applications starting with OS X Lion has been known for over a year now. You'll need to upgrade to the latest version of Photoshop
-
Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.
Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry -
Can open adobe reader, but can't open a pdf.
can open adobe reader, but can't open a pdf. have uninstalled reader 2 times and reinstalled it, but still get same results. running windows xp.
Three things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html
P.S. this is a public forum; please do not post your telephone numbers or other private data (email signature!) -
I downloaded a movie from iTunes. I wanted to burn a DVD of the movie which I could play on my home entertainment system. After I had burned the DVD I tried to play the movie from it on the computer and got the message " You can't open the application mediaioserver because it may be damaged or incomplete". What is this all about? Are there settings I need to change? PS: I tried to play the DVD on my home DVD player and it also doesn't work. Help!
Klaus: Does this mean that I can only watch this movie on my computer and ipad not on my home big screen system?
Maybe you are looking for
-
Can not add movies to the iTunes Library
I have an iMAC running iTunes 10.4 on s install of Lion. I have had this problem with previous versions of OS/X and iTunes. I have the exact same problem on Windows. I just can not import a movie to the library. I've used File>Import as well as dra
-
Transfer Purchased onto iTunes not working
Today, I borrowed my friends iPod to download the purchased songs onto my iTunes. When it said it was finished, it only transferred 34 out of 300 and some odd number purchased. Could you help me please? I authorized the account and clicked on transfe
-
Hello! I've just installed Oracle 10g XE and I've noticed that ROWID pseudocolumn is null for the rows in the test table that I've created. Does that mean that ROWID is not implemented in this edition. Will it be supported in production releases?
-
hi, Experts I call the function "BAPI_BUPA_FS_CREATE_FROM_DATA2" remote to create BP data in CRM. the return message is "Instance BJXE001005 belonging to object type BusinessPartnerFS was created". But the BP "BJXE001005" has not been successfull
-
What isthe purpose of the almost invisible links shown below the title of a post.
I just made a post and if I look closely, there are a number of what appear to be very faint links just to the right of the date. You can only tell what they are if you hover oer them and the tooltip appears with no text included. If they are links,