Iphoto wont open or update after Yosemite upgrade
Hi there,
I have seen questions like this but not exactly this before.
After backing my early 2011 Macbook pro 13" to my 'my passport' I installed Yosemite about a week ago.
Now iPhoto will not open. There is no error message, just nothing happens. The icon doesn't bounce in the dock.
I then noticed that there was an iPhoto and iMovie update available and I thought this might be the remedy, so clicked on 'update' in the App Store. They will not update either. No error message just either 'paused' or 'waiting' status for over 2 hours, but nothing happens and the buttons are greyed out.
I have closed all apps and rebooted and tried again but the same thing happens. Most of the time the buttons are greyed out.
Any advice? Do I have to reinstall Yosemite or iphoto?
If I have backed up my system, are my photos safe?
Any help or info gratefully received.
Thank you.
If you have backed uo your system then your photos should be safe. But we can't say with absolute certainty as we don't know the back up settings you chose.
Here's what will work with certainty:
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Try reinstall iPhoto on your Mac - just the app not the Library.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Similar Messages
-
macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
Cannot open numbers files after yosemite upgrade
Numbers- Documents could not be opened/changed after Yosemite Upgrade on MacBook Pro.
Found solution... by Remove website data in Safari setting within Settings
-
HT202358 problems opening I photo after yosemite upgrade
I have tried to open i photo after loading yosemite and have been asked to download software to 'prepare' the mac for the new i photo version. I have done this and it says it's successfully installed the I Photo library upgrade but I still can't open I p
Did you use the iPhoto Library Upgrader to fix your iPhoto Library? Have you upgraded iPhoto to the latest version for use with Yosemite?
-
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
Pdf files don't open in Chrome after Yosemite upgrade
Trying to open a pdf or a ppt attachments on latest Chrome after the Yosemite upgrade, nothing happens. Please share your experience or a suggessted fix or a work around. I am using a macbook white early 2009
I am not one to recommend reinstall, but that might be required. One of the problems with CC is that it leaves some info in the system that makes it think it is installed, even after you uninstall it. There is a fix for that, but I don't remember it (right now I am not remembering much with pneumonia). If you decide to uninstall, you should go through the uninstall process (there may be a special uninstall for CC that I have not seen). Then run Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs. Remove any leftover part of the Acrobat folder, reboot, and reinstall. It may reinstall or you might run into that other fix that is needed. In that case you will have to search the forum.
-
my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.
What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Iphoto wont open after upgrade 10.10
Upgraded to 10.10
iphoto wont open due to library problem.
Downloaded upgrade and still won't open.I was running Version 10.9: "Mavericks"
This the message.
I did the upgrade/prepare. -
Updated my computer to OSX Yosimite 10.10.2, and now my IPhoto wont open
Updated my computer to OSX Yosimite 10.10.2, and now my IPhoto wont open. It said I needed to update to the newest version of IPhoto through the APP store, so I tried, but it has been stuck on 'INSTALLING' for hours. All of my mothers wedding photos, as well as the photos I need for school are in there! HELP!
Until you Upgrade to iphoto 9.6 you will not be able to use iPhoto
You can try canceling the upgrade and re-starting it
LN -
Why doesnt itunes 11.1.3 wont open app store after updating to ios7?
why doesnt itunes 11.1.3 wont open app store after i updated my phone to ios7?
Hi karthikprabhakaran,
If you are having issues connecting to the iTunes Store after updating to iOS 7, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
Cs4 wont open on mavericks after installing new Java update
Cs4 (photoshop and illustrator) wont open on mavericks after installing new Java update.
I have tried installing both from the auto prompt (which came up as 'software update') as well as directly downloading from this link: Java for OS X 2014-001
either way when i try to open a cs4 program the icon simply bounces around for a minute then it comes up "program not responding"
anyone have any ideas?
thanks in advance.Hi Matthew,
First of all, you should be able to check in your HD/Library/Receipts folder to see what has been installed by looking for the .pkg of it.
re: "I installed the security update from software update, and i want to make sure I downloaded something intended for my machine"
You should not be offered updates that are not intended for your System through Software Update. Software Update, as far as I know, reads the .pkg files in your Receipts folder and will offer what you need from that. (I believe that is correct....perhaps someone will correct me if I'm wrong)
Did you Repair Permissions from Disk Utility before and after the update?
If not I would try running Repair Permissions (HD/Applications/Utilities/Disk Utility/Repair Permissions).
I've found that with Security Updates that it is very important to Repair Permissions before and after updating.
littleshoulders [:-) -
Late 2012 Mac Mini slow after Yosemite upgrade
First time on forums - hope Im not asking a questions that has been asked several times before. I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite. I also found a link to Etresoft from another questions and ran it. For the sake of expediency - Ill go ahead and post the results. Any thoughts? - all help is more appreciated than I can express in words..
Problem description:
Mac running very slow after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:30:25 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
8 GB DDR3 1067 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
SMS19A450 1440 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1230 4 TB
EFI (disk4s1) <not mounted> : 315 MB
Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
VIA Labs, Inc. USB3.0 Hub
hub_device
Western Digital My Passport 0741 2 TB
EFI (disk2s1) <not mounted> : 210 MB
2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
hub_device
Apple, Inc. Keyboard Hub
Logitech Optical USB Mouse
Apple Inc. Apple Keyboard
MediaTek Inc MT1887 507.9 MB
disk5s1 (disk5s1) <not mounted> : 32 KB
JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
Seagate FreeAgent FW 800mbit - 800mbit max
EFI (disk3s1) <not mounted> : 210 MB
2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Magican.app
[not loaded] com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
[not loaded] com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
5 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
4 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.magican.castle.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[running] net.kromtech.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
duet Application (/Applications/Duet.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application (/Applications/Google Chrome.app)
Box Sync UNKNOWN (missing value)
Knock Application (/Applications/Knock.app)
MagicanMonitor Application (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
Destinations:
My Book [Local]
Total size: 4.00 TB
Total number of backups: 69
Oldest backup: 2014-05-28 08:55:42 +0000
Last backup: 2015-02-09 03:04:24 +0000
Size of backup disk: Adequate
Backup size 4.00 TB > (Disk used 791.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
4% MailTab Pro for Gmail
3% Google Chrome
2% MagicanMonitor
1% bztransmit
Top Processes by Memory: ℹ️
490 MB MailTab Pro for Gmail
412 MB softwareupdated
283 MB AntiVirus
271 MB Google Chrome Helper EH
232 MB Google Chrome
Virtual Memory Information: ℹ️
2.53 GB Free RAM
6.05 GB Active RAM
1.39 GB Inactive RAM
1.70 GB Wired RAM
91.14 GB Page-ins
154 MB Page-outs
Diagnostics Information: ℹ️
Feb 8, 2015, 08:27:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
Feb 6, 2015, 08:20:10 PM Self test - passed
Feb 6, 2015, 07:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade
I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM. I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly. It's unusable to say the least. Is there anything I can do to speed it up? There must be a reason why the performance is so bad.
Problem description:
Slow after Yosemite upgrade.
EtreCheck version: 2.1.8 (121)
Report generated 1 March 2015 8:48:15 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.7 GHz Intel Core i7 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Thunderbolt Display 2560 x 1440
DX80 spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 12:20:13
Disk Information: ℹ️
Hitachi HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. iPad
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Display Audio
Firewire Information: ℹ️
BUFFALO INC. HDD 800mbit - 800mbit max
EFI (disk2s1) <not mounted> : 210 MB
ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
[loaded] org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
[loaded] org.gpgtools.Libmacgpg.xpc.plist [Click for support]
[loaded] org.gpgtools.macgpg2.fix.plist [Click for support]
[running] org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
[loaded] org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
SpiderOak Application (/Applications/SpiderOak.app)
AirServer Application Hidden (/Applications/AirServer.app)
Plex Media Server Application (/Applications/Plex Media Server.app)
Box Sync Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 21 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
1Password
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
GPGPreferences [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
Destinations:
ext2tb [Local]
Total size: 2.00 TB
Total number of backups: 38
Oldest backup: 2012-10-07 09:09:10 +0000
Last backup: 2015-03-01 09:07:46 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 197.68 GB X 3)
Top Processes by CPU: ℹ️
40% WindowServer
12% firefox
2% Activity Monitor
1% Box Sync Monitor
1% sysmond
Top Processes by Memory: ℹ️
533 MB mds_stores
498 MB firefox
429 MB softwareupdated
172 MB InterCheck
155 MB SpiderOak
Virtual Memory Information: ℹ️
8.58 GB Free RAM
4.31 GB Active RAM
2.49 GB Inactive RAM
1.79 GB Wired RAM
10.08 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 1, 2015, 08:38:46 PM /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
Mar 1, 2015, 08:30:37 PM /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
Mar 1, 2015, 04:42:31 PM /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
Mar 1, 2015, 08:26:20 AM Self test - passedWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I deleted languages now iphoto wont open
Hi there,
I deleted all the languages from iphoto . I clicked on the iphoto icon whilst it was in finder, i clicked on info to show details, then i erased all languages( deselected english but somehow still deleted) now iphoto wont open.
Any suggestions? I thought about backing up the application from time machine but will that erase any new photos i have on current iphoto library?
Thanks mattMatt:
You'll need to restore the iPhoto application using Time Machine. Restoring the application will not affect your photos. They are separate from the application. *Never delete the English module from any application or the system.*
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Illustrator CS4 no longer previews fonts in Character palette after Yosemite upgrade..Please Help
Illustrator CS4 no longer previews fonts in Character palette after Yosemite upgrade
Please help...Thanksinkydmark,
You may wish to roll back from Yosemite and wait to see whether the issues will be solved and reported as such.
Weeding out in older plugins seems to have helped some in some cases. It also seems that JAVA Runtime may be involved, for some it seems to help to roll back to an ealier version, for others to update to the newest.
All the above is more or less hearsay so far, with no definite final confirmation.
In any case, there is something to be sorted out by someone. Yosemite was made long after CS4, so it may be difficult.
There is a way round an even worse issue shown in post #2 here:
https://forums.adobe.com/thread/1610655
Maybe you are looking for
-
Hi Experts, I have posted one document with amount of USD 30000.00 against 30001 Fund center ... Document Number is :- 280000001 same amount has released as consumable amount ,release document number is :- 29000001 Now i am not understand why system
-
i was wondering if you should have separate accounts for each iphone, should there be two accounts
-
I've designed a form using a template form. How can i save the form as a pdf for my survey?
-
Bex3.5 query to Business Objects
Hello experts. Can anyone tell me on the possibilities of porting the Bex 3.5 queries directly to Business Objects. This is without upgrading to BI 7.0 queries. Thanks Mrinalini
-
How to run the sample project OrderFulfillment in 6.0.1?
I installed ALBPM 6.0.1 and imported a sample project OrderFulfillment that came with the software. Try to run the New Customer application, but encountered an JDBC error. Apparently, this project has an external resource, Oralce DB ORDERS Schema. I