Iphoto wont start after tiger installation

I istalled Tiger a while ago but iphot never worked properly in that the application doesn't start. the "hour glass" keeps rotating. i tried to re-install but that didn't work either.. Any suggestions before i take it to apple? Its a MacBook. Thanks

You should be able to Software Update and that will bring your iPhoto up to date.
iPhoto was 9.2.3 at 10.6.8, so I don't know why yours was stuck at 8.1.2
However you can stick the #2 10.6 disk into your machine and should be able to run the bundled app installer.
If that doesn't work there is Pacifist from CharlesSoft that you can extract iPhoto and replace your corrupted one, then run Software Update to bring it current.
Once you have replaced iPhoto, rebuild the database
https://support.apple.com/kb/HT2638
If your still having problems, perhaps a user account or drive permissions issue
..Step by Step to fix your Mac

Similar Messages

Iphoto wont start after migration from snow leopard to mountain lion

Hello everyone hope you can help me, I've migrate from Snow Leopard to Mountain Lion and my IPhoto (8.1.2) won't start, I cant reinstall from app store because it came with the copy of Snow Leopard already instaled on my Imac...And I cant find the original Disc, so anyone can help ? felling desperate...

You should be able to Software Update and that will bring your iPhoto up to date.
iPhoto was 9.2.3 at 10.6.8, so I don't know why yours was stuck at 8.1.2
However you can stick the #2 10.6 disk into your machine and should be able to run the bundled app installer.
If that doesn't work there is Pacifist from CharlesSoft that you can extract iPhoto and replace your corrupted one, then run Software Update to bring it current.
Once you have replaced iPhoto, rebuild the database
https://support.apple.com/kb/HT2638
If your still having problems, perhaps a user account or drive permissions issue
..Step by Step to fix your Mac

Refind wont start after arch installation

Hi,
I just installed Arch on my Macbook Pro Retina Late 2013. After reboot I got a blank gray screen and rEFInd refuses to start. The curious thing is: I removed the arch partition (ext4) and refind starts again as if nothing has happened. What is the problem?
Regards

Okay, I guess the problem is that I deleted the ext4 drivers in my first try. Meanwhile I somewhere read, that refind is capable of finding the linux kernel and that I dont have to mount the ESP to /boot. Now I have two solutions
1) Use ESP as /boot and configure refinds conf correctly for the root partition, or
2) Use refinds ext4 drivers and dont use ESP, which is the more clean way imho.
Well, one question left: Is the ext4 driver just for the EFI bootstage, or will this driver then be used from my linux system later? Sorry maybe a dumb question. I would claim no but I am not sure.

IPhoto wont start after Mountain Lion Upgrade

Hi,
If anyone has a good tip or solve please let me know.
My iPhoto is un-available since I ugraded to Mountain Lion and thus upgraded to 9.3.2
When I try opening it it will tell me that this Mac is noy the right mac to run this program on.
My OS is in Dutch so thats why the net picture shows that language
Basically it says that this type of mac doesnt support iPhoto.

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Satellite P300-156: Vista wont start after installation of Toshiba Tempo

Hi
I have a new Satellite P300-156 which I have been using for about a month with no problems. It has been great.
This morning I had a message come up to install Toshiba Tempo which I did and all was fine until I restarted the laptop and now Vista wont start.
I have followed all the diagnostic tools, tried system restore etc... but still nothing.
I currently live in Italy, so is hard to take it into a computer repair shop as I dont speak Italian and the operating system is in english.
From what I can see my only option now is to do the TOSHIBA HDD Recovery, but I would loose some data which I have done since my last backup. Is there any way to backup data to a usb storage device using command promts before I do this, or is there a simpler way out of this?
Any advice would be great.
Thanks
Keith

Hi
Thanks for getting back so soon, however, F8 does nothing when starting. I have an option of F2 or F12, but neither gives me options to access last known good configuration.
Is that the same as a system restore from the Vista system recovery options as I have tried this (gives you a list of last known configurations). But still no luck.
If I do the TOSHIBA HDD Recovery function do I need a disc for this?
thanks

Windows 8 wont start after format

Hello,
So i decided to format my pc for the first time since i build it, i did everything as usual but it wont start, tried the way xmad posted but its the same, im using the same iso i used the first time, after the installer says its going to restart to complete the instalation, the pc reboots and then nothing happens, i can move the mouse pointer but the screen is black, this happens when i boot from the hard drive with the prefix "UEFI".
if i boot from the hard drive without the prefix "UEFI" i can see the windows 8 logo loading but then its the same black screen.
PC specs:
i7 4770k
Msi z87 mpower max
120gb ssd
16gb ram
850w psu
radeon hd7970
Any ideas?

No i didnt update the bios.
Update: I got a copy of windwos 8.1 and tried installing it the same way and it worked(still havent updated the bios).
i dont know what was the problem with win8, i dont know if the iso file got corrupted which is very rare since i used it like 2 weeks ago in another pc, it cannot be the usb stick (i used the same usb stick to install win 7 and 8.1) and also tried installing it from a dvd.
I think im going to stay with this windows, thanks for replying.

Database is not starting after RAC installation

Hi All,
I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Can anybody help what might be the problem?
Thanks,
Praveen

Hi,
I'm giving the contents of alter log file from the first node...
Mon Feb 19 16:45:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 16:46:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=31282
DIAG started with pid=3, OS id=31284
PSP0 started with pid=4, OS id=31286
LMON started with pid=5, OS id=31300
LMD0 started with pid=6, OS id=31315
MMAN started with pid=7, OS id=31317
DBW0 started with pid=8, OS id=31319
LGWR started with pid=9, OS id=31321
CKPT started with pid=10, OS id=31323
SMON started with pid=11, OS id=31325
RECO started with pid=12, OS id=31327
CJQ0 started with pid=13, OS id=31329
MMON started with pid=14, OS id=31331
Mon Feb 19 16:46:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=31333
Mon Feb 19 16:46:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 16:46:00 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 16:46:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 16:46:01 2007
CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:01 2007
Starting background process ASMB
ASMB started with pid=19, OS id=31365
Starting background process RBAL
RBAL started with pid=20, OS id=31369
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 16:46:05 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 16:46:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 16:46:06 2007
Database mounted in Exclusive Mode
Mon Feb 19 16:46:09 2007
Successful mount of redo thread 1, with mount id 3309011657
Assigning activation ID 3309011657 (0xc53b82c9)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 16:46:09 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 16:46:09 2007
SMON: enabling cache recovery
Mon Feb 19 16:46:09 2007
create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Feb 19 16:46:24 2007
CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Feb 19 16:46:36 2007
CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Mon Feb 19 16:46:38 2007
SMON: enabling tx recovery
Mon Feb 19 16:46:39 2007
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=22, OS id=32303
Mon Feb 19 16:46:39 2007
Completed: CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:39 2007
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:46 2007
CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Mon Feb 19 16:46:46 2007
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Mon Feb 19 16:47:05 2007
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:47:34 2007
Thread 1 cannot allocate new log, sequence 3
Checkpoint not complete
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:48:10 2007
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 4
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:49:05 2007
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 5
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:50:19 2007
Thread 1 cannot allocate new log, sequence 6
Checkpoint not complete
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:51:00 2007
Thread 1 cannot allocate new log, sequence 7
Checkpoint not complete
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 7
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:51:54 2007
Thread 1 cannot allocate new log, sequence 8
Checkpoint not complete
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 8
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:55:32 2007
Thread 1 cannot allocate new log, sequence 9
Checkpoint not complete
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 9
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:56:35 2007
Thread 1 cannot allocate new log, sequence 10
Checkpoint not complete
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 10
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:56:52 2007
Thread 1 cannot allocate new log, sequence 11
Checkpoint not complete
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 11
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:04 2007
Thread 1 cannot allocate new log, sequence 12
Checkpoint not complete
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 12
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:57:14 2007
Thread 1 cannot allocate new log, sequence 13
Checkpoint not complete
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 13
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:31 2007
Thread 1 cannot allocate new log, sequence 14
Checkpoint not complete
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 14
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:58:13 2007
Thread 1 cannot allocate new log, sequence 15
Checkpoint not complete
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 15
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:59:42 2007
Thread 1 cannot allocate new log, sequence 16
Checkpoint not complete
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 16
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:00:33 2007
Thread 1 cannot allocate new log, sequence 17
Checkpoint not complete
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 17
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:01:49 2007
Thread 1 cannot allocate new log, sequence 18
Checkpoint not complete
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 18
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:02:23 2007
Thread 1 cannot allocate new log, sequence 19
Checkpoint not complete
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 19
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:04:06 2007
Thread 1 cannot allocate new log, sequence 20
Checkpoint not complete
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 20
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:05:22 2007
Thread 1 cannot allocate new log, sequence 21
Checkpoint not complete
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 21
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:06:22 2007
Thread 1 cannot allocate new log, sequence 22
Checkpoint not complete
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 22
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:08:42 2007
Thread 1 cannot allocate new log, sequence 23
Checkpoint not complete
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 23
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:09:43 2007
Thread 1 cannot allocate new log, sequence 24
Checkpoint not complete
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 24
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:10:42 2007
Thread 1 cannot allocate new log, sequence 25
Checkpoint not complete
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 25
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:11:31 2007
Thread 1 cannot allocate new log, sequence 26
Checkpoint not complete
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 26
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:12:01 2007
Thread 1 cannot allocate new log, sequence 27
Checkpoint not complete
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 27
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:13:12 2007
Thread 1 cannot allocate new log, sequence 28
Checkpoint not complete
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 28
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:14:05 2007
Thread 1 cannot allocate new log, sequence 29
Checkpoint not complete
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 29
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:14:57 2007
Thread 1 cannot allocate new log, sequence 30
Checkpoint not complete
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 30
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:16:29 2007
Thread 1 cannot allocate new log, sequence 31
Checkpoint not complete
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:17:54 2007
Starting background process EMN0
EMN0 started with pid=25, OS id=15651
Mon Feb 19 17:17:54 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:17:55 2007
Stopping background process QMNC
Mon Feb 19 17:17:55 2007
Stopping background process CJQ0
Mon Feb 19 17:17:57 2007
Stopping background process MMNL
Mon Feb 19 17:17:58 2007
Stopping background process MMON
Mon Feb 19 17:17:59 2007
Shutting down instance (immediate)
License high water mark = 1
Mon Feb 19 17:17:59 2007
Stopping Job queue slave processes
Mon Feb 19 17:17:59 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:01 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:01 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:03 2007
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:04 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:04 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:09 2007
freeing rdom 0
Mon Feb 19 17:18:12 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:18:13 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16124
DIAG started with pid=3, OS id=16126
PSP0 started with pid=4, OS id=16128
LMON started with pid=5, OS id=16130
LMD0 started with pid=6, OS id=16132
MMAN started with pid=7, OS id=16134
DBW0 started with pid=8, OS id=16136
LGWR started with pid=9, OS id=16138
CKPT started with pid=10, OS id=16140
SMON started with pid=11, OS id=16142
RECO started with pid=12, OS id=16144
CJQ0 started with pid=13, OS id=16146
MMON started with pid=14, OS id=16148
Mon Feb 19 17:18:13 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=16150
Mon Feb 19 17:18:13 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:18:13 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:18:14 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 17:18:14 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:18:14 2007
Starting background process ASMB
ASMB started with pid=19, OS id=16182
Starting background process RBAL
RBAL started with pid=20, OS id=16186
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:18:18 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:18:23 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:18:23 2007
Successful mount of redo thread 1, with mount id 3309012054
Mon Feb 19 17:18:23 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:18:23 2007
alter database archivelog
Completed: alter database archivelog
Mon Feb 19 17:18:23 2007
alter database open
Mon Feb 19 17:18:23 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=22, OS id=16393
Mon Feb 19 17:18:23 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=23, OS id=16395
Mon Feb 19 17:18:23 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:18:23 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:18:23 2007
SMON: enabling cache recovery
Mon Feb 19 17:18:23 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:18:23 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:18:23 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=24, OS id=16422
Mon Feb 19 17:18:23 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:18:23 2007
SMON: enabling tx recovery
Mon Feb 19 17:18:23 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=25, OS id=16449
Mon Feb 19 17:18:25 2007
Completed: alter database open
Mon Feb 19 17:18:25 2007
ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Mon Feb 19 17:18:28 2007
ALTER DATABASE ENABLE PUBLIC THREAD 2
Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:18:29 2007
Starting background process EMN0
EMN0 started with pid=26, OS id=16564
Mon Feb 19 17:18:29 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:18:29 2007
Stopping background process QMNC
Mon Feb 19 17:18:29 2007
Stopping background process CJQ0
Mon Feb 19 17:18:30 2007
Stopping background process MMNL
Mon Feb 19 17:18:31 2007
Stopping background process MMON
Mon Feb 19 17:18:32 2007
Shutting down instance (immediate)
License high water mark = 3
Mon Feb 19 17:18:32 2007
Stopping Job queue slave processes
Mon Feb 19 17:18:32 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:34 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:34 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:34 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:18:39 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:18:44 2007
ARCH shutting down
ARC1: Archival stopped
Mon Feb 19 17:18:49 2007
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:18:50 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:51 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:51 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:56 2007
freeing rdom 0
Mon Feb 19 17:18:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:19:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17373
DIAG started with pid=3, OS id=17375
PSP0 started with pid=4, OS id=17377
LMON started with pid=5, OS id=17379
LMD0 started with pid=6, OS id=17381
LMS0 started with pid=7, OS id=17383
LMS1 started with pid=8, OS id=17387
MMAN started with pid=9, OS id=17391
DBW0 started with pid=10, OS id=17393
LGWR started with pid=11, OS id=17395
CKPT started with pid=12, OS id=17397
SMON started with pid=13, OS id=17399
RECO started with pid=14, OS id=17412
CJQ0 started with pid=15, OS id=17428
MMON started with pid=16, OS id=17430
Mon Feb 19 17:19:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=17432
Mon Feb 19 17:19:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:19:01 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:19:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=17460
Mon Feb 19 17:19:02 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:19:02 2007
This instance was first to mount
Mon Feb 19 17:19:02 2007
Starting background process ASMB
ASMB started with pid=22, OS id=17466
Starting background process RBAL
RBAL started with pid=23, OS id=17470
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:19:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:19:09 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:10 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:19:10 2007
Successful mount of redo thread 1, with mount id 3308997510
Mon Feb 19 17:19:10 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:19:11 2007
ALTER DATABASE OPEN
This instance was first to open
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:19:11 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=26, OS id=17679
Mon Feb 19 17:19:11 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=27, OS id=17706
Mon Feb 19 17:19:11 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:19:11 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:19:11 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:19:11 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:19:11 2007
SMON: enabling cache recovery
Mon Feb 19 17:19:11 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=28, OS id=17708
Mon Feb 19 17:19:11 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:19:11 2007
SMON: enabling tx recovery
Mon Feb 19 17:19:11 2007
Database Characterset is WE8ISO8859P1
Mon Feb 19 17:19:11 2007
Instance recovery: looking for dead threads
Instance recovery: lock domain invalid but no dead threads
Mon Feb 19 17:19:12 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:12 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=17735
Mon Feb 19 17:19:13 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:20:11 2007
Shutting down archive processes
Mon Feb 19 17:20:16 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:23:35 2007
Starting background process EMN0
EMN0 started with pid=74, OS id=28350
Mon Feb 19 17:23:35 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:23:36 2007
Stopping background process QMNC
Mon Feb 19 17:23:36 2007
Stopping background process CJQ0
Mon Feb 19 17:23:38 2007
Stopping background process MMNL
Mon Feb 19 17:23:39 2007
Stopping background process MMON
Mon Feb 19 17:23:40 2007
Shutting down instance (immediate)
License high water mark = 34
Mon Feb 19 17:23:40 2007
Stopping Job queue slave processes
Mon Feb 19 17:23:40 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:24:07 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:07 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:24:08 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:24:18 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC1: Archiving disabled
ARCH shutting down
Mon Feb 19 17:24:18 2007
ARC1: Archival stopped
Mon Feb 19 17:24:18 2007
ARC0: Becoming the heartbeat ARCH
Mon Feb 19 17:24:18 2007
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:24:19 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:19 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:24:19 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:24:25 2007
freeing rdom 0
Mon Feb 19 17:24:35 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
__shared_pool_size = 255852544
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
__db_cache_size = 801112064
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:24:35 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=29950
DIAG started with pid=3, OS id=29952
PSP0 started with pid=4, OS id=29954
LMON started with pid=5, OS id=29956
LMD0 started with pid=6, OS id=29958
LMS0 started with pid=7, OS id=29960
LMS1 started with pid=8, OS id=29964
MMAN started with pid=9, OS id=29968
DBW0 started with pid=10, OS id=29970
LGWR started with pid=11, OS id=29972
CKPT started with pid=12, OS id=29974
SMON started with pid=13, OS id=29976
RECO started with pid=14, OS id=29978
CJQ0 started with pid=15, OS id=29980
MMON started with pid=16, OS id=29982
Mon Feb 19 17:24:36 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=29984
Mon Feb 19 17:24:36 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:24:36 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:24:39 2007
Reconfiguration started (old inc 0, new inc 4)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 not valid according to instance 1
* domain 0 valid = 0 according to instance 1
Mon Feb 19 17:24:39 2007
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=30069
Mon Feb 19 17:24:40 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:24:41 2007
Starting background process ASMB
ASMB started with pid=22, OS id=30121
Starting background process RBAL
RBAL started with pid=23, OS id=30125
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:24:45 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:24:49 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:24:49 2007
Successful mount of redo thread 1, with mount id 3309017062
Mon Feb 19 17:24:49 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Mon Feb 19 17:24:51 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:24:52 2007
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:24:52 2007
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:24:52 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=30406
Mon Feb 19 17:24:53 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=26, OS id=30422
Mon Feb 19 17:24:53 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:24:53 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:24:53 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:24:53 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:24:53 2007
SMON: enabling cache recovery
Mon Feb 19 17:24:53 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=27, OS id=30436
Mon Feb 19 17:25:07 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:25:07 2007
SMON: enabling tx recovery
Mon Feb 19 17:25:07 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=30882
Mon Feb 19 17:26:31 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:26:38 2007
ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
Mon Feb 19 17:26:53 2007
Shutting down archive processes
Mon Feb 19 17:26:58 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:32:16 2007
Error: KGXGN aborts the instance (6)
Mon Feb 19 17:32:16 2007
Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
ORA-29702: error occurred in Cluster Group Service operation
LMON: terminating instance due to error 29702
Mon Feb 19 17:32:17 2007
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
Mon Feb 19 17:32:18 2007
Trace dumping is performing id=[cdmp_20070219173217]
Mon Feb 19 17:32:21 2007
Instance terminated by LMON, pid = 29956
and also the output of crs_stat -t in first node is....
Name Type Target State Host
ora....d1.inst application ONLINE OFFLINE
ora....d2.inst application ONLINE OFFLINE
ora....od1.srv application ONLINE OFFLINE
ora....od2.srv application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora.bsaprod.db application ONLINE OFFLINE
ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
ora....003.gsd application ONLINE UNKNOWN dsrvbd003
ora....003.ons application ONLINE UNKNOWN dsrvbd003
ora....003.vip application ONLINE ONLINE dsrvbd003
ora....SM2.asm application ONLINE OFFLINE
ora....04.lsnr application ONLINE OFFLINE
ora....004.gsd application ONLINE OFFLINE
ora....004.ons application ONLINE OFFLINE
ora....004.vip application ONLINE OFFLINE

User profile synchronization service wont start after SharePoint Service pack SP2

Hi
-Using SharePoint 2010 with 1 appserver and 2 frontend webservers on Service Pack2. (ms server 2008r2, SQLServer2008r2).
-Farmaccount has been set to local admin on all sp servers.
-Firstly, the User Profile Service Application runs fine and is started. Dont mix it with the User profile synchronization Service.
Prior to installing SP2 User profile service application and user profile synchronization service were running fine.
The first thing I did after the installation of SP2 was running the:
-psconfig -cmd upgrade -inplace b2b -wait
As SharePoint setup user (spadmin).
This ran fine on the 2 front end web servers.
However i got one fault on the Appserver:
I have also tried:
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
which led to same resulting error.
So I tried to start the Use profile synchronization service as suggested manually by logging on with the Farmaccount, starting the user profile synchronization service through Central Administration. This led to Stuck on Starting status.
The windows services Forefront had status starting, then stopped.
One question:
Prior to starting the User profile synchronization service through Central Administration. What account and startup status should the 2 Forefront Windows Services have? (Automatic and local system?) or (Automatic and Farmaccount?) or (Disabled and Local
system?) or (Disabled and farmaccount?). Because i know that SharePoint UPA will provision these services though Central Administration. However what is the default state prior to starting the Synchronization service?
So i continue...
Since it was stuck on starting i stopped it with:
stop-SPServiceInstance -identity <upaSyncguid>
which gave me:
Stop-SPServiceInstance : An object of the type Microsoft.SharePoint.Administrat
ion.SPServiceInstanceJobDefinition named "job-service-instance-36bdf2ef-58f2-45
e5-8f78-ab75f646611a" already exists under the parent Microsoft.SharePoint.Admi
nistration.SPTimerService named "SPTimerV4". Rename your object or delete the
and i could fix with:
#Stop the stopping:
stsadm -o provisionservice -action stop -servicetype "Microsoft.Office.Server.Administration.ProfileSynchronizationService, Microsoft.Office.Server.UserProfiles,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" -servicename FIMSynchronizationService
I also removed the forefront certificate from personal - certificate store, as this is provisioned when user profile synchronization service is provisioned.
That set the Central Administration Status on the User profile synchronization Service to disabled. Fine.
Everytime i tried to start the user profile synchronization service (logged on as farmaccount), left it for 10-15 min and did iisreset and restart sharepoint timer service, and also tried rebooting the appserver. No change.
A thought, is it important to restart timer service and do iisreset on the two frontend servers after trying to start the user profile synchronization service on the appserver?
I'm getting to the point were i just want to delete the whole service application and set it up anew...
any tips will be greatly appreaciated.
brgs
Bjorn

You're very welcome, hope it helped, if not the I suggest you clear the configuration cache as follows.
The config cache is where config settings are stored locally on the Microsoft SharePoint server, so a SQL call isn’t required.
To clear the cache:
Stop the SP Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click
Services.
Right-click SharePoint 2010 Timer, and then click Stop.
Close the Services console.
On the computer that is running Microsoft SharePoint Server 2010 and on which the Central Administration site is hosted, click
Start, click Run, type explorer, and then press ENTER.
In Windows Explorer, locate and then double-click the following folder:
%SystemDrive%\ProgramData\Microsoft\SharePoint\Config\GUID
Notes
The %SystemDrive% system variable specifies the letter of the drive on which Windows is installed. By default, Windows is installed on drive C.
The GUID placeholder specifies the GUID folder. There may be more than one of these.
The ProgramData folder may be hidden. To view the hidden folder, follow these steps:
On the Tools menu, click Folder Options.
Click the View tab.
In the Advanced settings list, click Show hidden files and folders under
Hidden files and folders, and then click OK.
You can also simply type this directly in the path if you do not want to show hidden files and folders.
Back up the Cache.ini file. (Make a copy of it. DO NOT DELETE THIS FILE, Only the XML files in the next step)
Delete all the XML configuration files in the GUID folder (DO NOTE DELETE THE FOLDER). Do this so that you can verify that the GUID folders content is replaced by new XML configuration files when the cache is rebuilt.
Note When you empty the configuration cache in the GUID folder, make sure that you
do NOT delete the GUID folder and the Cache.ini file that is located in the GUID folder.
Double-click the Cache.ini file.
On the Edit menu, click Select All.
On the Edit menu, click Delete.
Type 1, and then click Save on the
File menu. (Basically when you are done, the only text in the config.ini file should be the number 1)
On the File menu, click Exit.
Start the Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click
Services.
Right-click SharePoint 2010 Timer, and then click Start.
Close the Services console.
Note The file system cache is re-created after you perform this procedure. Make sure that you perform this procedure on all servers in the server farm.
Make sure that the Cache.ini file in the GUID folder now contains its previous value. For example, make sure that the value of the Cache.ini file is not 1.
Check in the GUID folder to make sure that the xml files are repopulating. This may take a bit of time.
BRGS
Mishagri

OIF installation - OHS doesn't start after Webgate installation

Hi,
We are using Solaris 10 sparc server where we have installed Oracle Http Server(OHS) instance and Oracle Identity Federation(OIF).
We have also installed Oracle access server on different host and we have created Webgate profile for OHS from Access System Console and assoaciate that webgate with Access Server.
Then we have installed OHS webgate Oracle_Access_Manager10_1_4_3_0_sparc-s2_OHS2_WebGate on the server where OHS is installed, now when we try to restart OHS instance after successful installation of webgate we are getting the following error:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=dm01-app1-zone03:6701
1 of 2 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohsoam/OHS/OHS/
Error
--> Process (index=1,uid=1447172267,pid=14240)
failed to start a managed process after the maximum retry limit
Log:
/app01/Oracle/asinst_1/diagnostics/logs/OHS/ohsoam/console~OHS~1.log
Note: We are using the following gcc libraries which are required for the installation of OHS webgate:
libgcc_s.so.1
libstdc++.so.5
In the OHS logs we have found an error stating like:
httpd.worker: Syntax error on line 1040 of /app01/Oracle/asinst_1/config/OHS/ohsoam/httpd.conf: Cannot load /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1 into server: ld.so.1: httpd.worker: fatal: /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1: wrong ELF class: ELFCLASS32
So can anyone please help us out in finding what is causing this issue. Are we missing something or using wrong libraries?

Thanks for your response!
We also tried with 64 bit webgate /Oracle_Access_Manager10_1_4_3_0_sparc-s2_64_OHS11g_WebGate/ but we are still getting the following error during the webgate installation itself:
/Configuring WebGate...
There is an error. Please try again.
ld.so.1: configureWebGate: fatal:
/app01/netpoint/webgate/access/oblix/tools/configureWebGate/../../../oblix/lib/libstdc++.so.5:
wrong ELF class: ELFCLASS32
Killed
WebGate configuration was unsuccessful. You can run the configuration program
again or manually run
/app01/netpoint/webgate/access/oblix/tools/configureWebGate/start_configureWebG
ate
Would you like to run it again?
[X] 1 - Yes
[ ] 2 - No/
So please let us know are we using the correct libraries and webgate for OHS.
If not then please suggest the link from where we can download the correct one.
Following are our OS details:
# isalist
sparcv9+vis2 sparcv9+vis sparcv9 sparcv8plus+vis2 sparcv8plus+vis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
# isainfo -kv
64-bit sparcv9 kernel modules
# isainfo -v
64-bit sparcv9 applications
vis2 vis
32-bit sparc applications
vis2 vis v8plus div32 mul32
# uname -a
SunOS dm01-app1-zone03 5.10 Generic_142900-02 sun4u sparc SUNW,Sun-Fire-V440

Iphoto wont start after tiger installation

Similar Messages

Maybe you are looking for