Iphoto wont work after updating to mountain lion
I updated to mountain lion now my iphoto wont work. I tried updating but couldnt find iphoto 9.0 they said I needed. I downloaded and installed iphoto 9.4.2 and it still won't work. It says: your photo library is either in use or has become unreadable. Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this quit iPhoto and then reopen while keeping the option and command keys pressed.
I did that and it still gives me the same message when I try to open.
Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library â Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT
Similar Messages
-
Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?
A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN -
Volume not working after update to mountain lion? cannot figure out how to fix
update to mountain lion today, now cannot listen to itunes, no volume on facetime etc . . . cannot figure out what problem is
ThanksHi Al,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
Safari not working after update to mountain lion
After I updated my os to mountain lion from snow leopard, safari will not open. Any suggestions? My internet is working fine because I was able to use an alternate web browser.
Try opening safari directly from /Applications, not the dock icon. If this works, remove the dock icon and replace it.
-
i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?
I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574 -
after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.
Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev -
Prior to Mountain lion upgrade we were running OS X Lion and everything was working fine. we upgraded to Mountain Lion and didnt notice the issue until a couple of months when we tried using the SD card reader to import pictures. i rolled back to snow leopard recently to wipe clean my hard disk and the SD card started working again but after updating to mountain lion the same issue occurs. need help thanks!
Take you and your friend to an Apple store or AASP.
-
After updating to mountain lion on my mac pro I am unable to connect my g-raid
After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?
Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?
If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened. -
On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My itunes wont work after update
my itunes wont work after update. whats the problem.
also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.
-
After updating to mountain lion, icloud password has not been accepted by system preferences
After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?
I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......
-
After updating to Mountain lion I am having trouble printing to my wifi Epson printer
After updating to Mountain Lion I am having trouble printing on my wifi Epson Workforce 645. I keep getting an error message and my computer is set in the system prefrences to that printer
What is the error message?
Try resetting the printer queues:
http://support.apple.com/kb/PH11143
This update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many. -
After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?
why did they erase something usefull and easy to use?
-
After updating to mountain lion, my Safari e-mail thru AT
After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.
Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1 com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2 com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???
Maybe you are looking for
-
If I want to export text, including soft returns, to xml I get the error that some kind of characters are not recognized. Is there a way to export soft returns correctly to xml ? I already posted a similar question, but maybe I was not clear anough,
-
Logic behind read statement and material
SORT IT_EKBEF BY EBELN EBELP. READ TABLE IT_EKBEF INTO WA_EKBEF WITH KEY EBELN = WA_FINAL-EBELN EBELP = WA_FINAL-EBELP BINARY SEARCH. IF SY-SUBRC = 0. WA_FINAL-MENGE = WA_EKBEF-MENGE. ENDIF. the above is my
-
Adobe flash player installer screen blank.
Every time I try to install the latest Flash player the "Adobe Flash Player Installer" screen goes blank. I'm on mac by the way (Yosemite) "Getting installation" and the bar shows up for a split second and then dissapears. The rest of the screen is c
-
Hi, Product allocation is maintained at component. When I create sales order at parent material, allocation check takes place at component level (MATP is used). e,g ,incoming quantity (allocation) is 20 units. When I delete the corresponding ATP tree
-
hello, i am new to this. i have created a monitoring object with some rules. When the threshhold value is met, the SCOM should automatically invoke the particular runbook through connector to perfom some action like increasing disk space,