Iphoto08 not compatible with RAW shot via Canon Powershot SD850 IS

Lifehacker posted an interesting article recently whereby you could enable RAW shooting mode on a consumer grade point-and-shoot Canon digital camera by using a free open source project called CHDK.
http://lifehacker.com/387380/turn-your-pointand+shoot-into-a-supercamera
I've installed this software on my camera (Powershot SD850IS) but unfortunately iPhoto is unable to upload RAW images captured on my camera. I'm guessing this is because RAW on a Canon SD850 is not supported (naturally, when RAW isn't a supported feature on my Canon).
Does anyone know if there is a way to upload these RAW pictures into iPhoto, or whether I will have to use a 3rd party app, like photoshop, to do my editing before being converting into JPEG before uploading into iPhoto08.
Thanks
VP

Adobe has an application that will convert the RAW files into DNG format which iPhoto can use. Get it here: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe .... You can check to see if it supports your Canon.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

Is the RAW format of Canon PowerShot G7X possibile in Lightroom ver. 5.7?

I use Lightroom 5 on my Acer PC. I have just bought a new camera, Canon PowerShot G7X, with Raw format possibility. I have also upgraded my Lightroom 5 to version 5.7. Still the application will not accept the RAW format pictures taken with this camera. Do I do something wrong, or does the latest version (5.7) not include the RAW format of Canon PowerShot G7X?

Hi Jan,
Yes your PowerShot G7 X is supported with LR 5.7. Would suggest you to make sure your Lr is up-to-date(From Help>Updates).
In case you still get that issue, try the below suggestions and check.
Restore Lr preferences. Recover catalog, images after resetting preferences
Create new Lr catalog, import G7 X raw files and then check.
Let me know how it goes.
Thanks
~ Arpit

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Canon T3i download cable will no longer work after 10.10 download. Plugging the cable into the 15 inch laptop says not compatible with software. Was fine before the 10.10 upgrade.

10.10 is installed. Now when plugging the download cable in from my wife Canon T3i camera to my wifes 15 inch Apple laptop it says not compatible with the software. Worked fine before the 10.10 upgrade. However I CAN download my pictures from my Canon 6D camera to MY 15 inch Apple laptop.....

I have a DSC-T1 Sony camera. I also have a Panasonic video camera with a built in digital camera. I just took some shots with the Panasonic. Plugged it in, and it worked perfectly. iphoto opened and did what it was supposed to do. I then tried the Sony and nothing happened again. Maybe this is a problem with the mac not recognizing certain cameras...?????
Macbook Pro 15" Mac OS X (10.4.6)
Macbook Pro 15" Mac OS X (10.4.6)

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Pdf/x-4 2010 pdf preset made via Indesign not compatible with Illustrator?

Hello all
I am working with a digital printing company and want to create a pdf preset that they can distribute to their customers to help make sure pdfs are properly made for their workflow. We've tested pdf/x-4 on their equipment and want to make that standard the base for their preset.
I made a preset in IndesignCC which shows up and is accessible in InDesignCC and PhotoshopCC, but is not accessible in IllustratorCC. It does not show up in the presets list in the "save as... pdf" dialogue. It does show up in the Edit>Adobe PDF Presets function though.
When I attempt to load the .joboptions file into Illustrator via that Adobe PDF Presets function I get the error "The preset is not recognized as a valid .joboptions file."
I noticed that IllustratorCC is using the pdf/x-4 (2008) standard, while InDesignCC is using the pdf/x-4 (2010).
Is IllustratorCC not yet compatible with the 2010 standard? If not, this is a serious wrench in the pdf preset workflow that allows the applications to share .joboptions files amongt themselves.
Any thoughts or help solving the problem of sharing that InDesign Generated preset with Illustrator would be much appreciated.
Michael Riordan
Owner/Adobe Certified Instructor
Digital DesignLab
http://www.learnadobesoftware.com

Hi jdanek, thanks for replying. PDF/x-4 supports transparency natively, supports multiple color spaces (this allows the vendor's rips to handle color conversion), and is an excellent option for their PDF print engine workflow. They want a custom variety that sets the resolution, bleed, etc. to give to their customers.
I did resolve the issue by making a new preset in Illustrator. That one is also available in InDesign and Photoshop but still, I'm curious as to why the InDesign-made preset is not compatible with Illustrator.
Michael Riordan
Owner/Adobe Certified Instructor
Digital DesignLab
http://www.learnadobesoftware.com

I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd so I need new software. Any ideas?

Hi. I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd (I'm very disappointed about that.) The photos are stored in my iphoto and I can burn a dvd using idvd but there is no audio So.... I need new software. I have a Mac OS X 10.5.8 and my digital still camera is the Canon Cybershot These are home movies of my kids and the viedeos are precious. Thanks in advance!

Canon Cybershot
I can't trace a camera of that name. All that comes up is either the Sony Cybershot or the Canon Powershot!
Please confirm excactly what camera you have, and what version of iMovie.

Problem connecting to internet via Firefox as XUL Runner Error Platform version is not compatible with minVersion 1.9.2.16 max version 1.9.2.16

Firfox requested to update previous version to new version of which i allowed. After installation complete i tried to connect to the internet and was denied with a following error window appearing. As explained above i shall explain again as shown in the error window.
XULRunner
Error: Platform version " is not compatible with
minVersion >= 1.9.2.16
maxVersion<= 1.9.2.16
This will not allow me to connect to the internet as i would like to continue to.
Please restore if possible my previous toolbar and able for me to connect to the internet.
Thank you.

This issue can happen when the updater wasn't able to update all files in the Firefox program folder.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Hi, photoshop crashed and the file I was previously working in on the same version says Could not complete your request because the file is not compatible with this version of Photoshop. I'll appreciate any help. Thank you.

hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

ACR 5.7 not compatible with PSE 6 or 7

Though the recently released ACR 5.7 works with PSE 8, it is not compatible with PSE 6 or 7. A number of people (including me) have observed that if you try to open a raw file in 6 or 7 you get:
Unable to use the Camera Raw plug-in. It is not compatible with this version of Photoshop Elements.
The accompanying documentation is an inconsistent mess about which versions are supported, variously implying that it works with 6 or later, 7 or later, or just 8:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4685
This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe® Creative Suite® 4, Adobe Photoshop® CS4, Adobe Photoshop Elements 8 and Premiere® Elements 8 software.
The Camera Raw 5.7 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS4, versions of Photoshop Elements earlier than Photoshop Elements 6.0, or versions of Premiere Elements earlier than 4.0.
The latest version of the Camera Raw plug-in available for Photoshop Elements 6.0 (Windows) is Camera Raw 5.5.
This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe Creative Suite 4, Photoshop CS4, Photoshop Elements 7.0 or 8 and Premiere Elements 7.0 or 8.
5. Navigate to the location designated by your version of Photoshop Elements: (Please read directory carefully)
a. Photoshop Elements 7.0: Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_5.7_ReadMe.pdf
This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Photoshop CS4, Photoshop Elements 8.0 and Premiere Elements 8.0.
The Camera Raw 5.7 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS4 or versions of Photoshop Elements earlier than Photoshop Elements 7.0 for Windows and Photoshop Elements 6 for Mac.
Navigate to location designated by your version of Photoshop Elements:
a. Program Files\Common Files\Adobe\Plug-ins\Elements 8\ File Formats
b. Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats

I agree with John, there is certainly a mess and confusion
over the use of ACR 5.7 with PSE 7. I have tried to upgrade and got various error messages including the version incompatibility one. I did try both the 32 and 64 bit versions since I am running Windows 7 64 bit. However I have now reached a slightly different opinion since I am still able to open Raw files from my Canon G10 (which previously worked with 5.6) but cannot open my EOS 550D Raw files which suggests a specific code problem rather than a version incompatibility. Any comments or help Adobe?

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

CS6 file "not compatible with this version of Photoshop"

We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

Assuming video is not compatible with compiz-fusion...?

I'm installing ArchLinux on a extra computer at work... works great... but for the fun of it I tried running compiz fusion on it. I get this:
[root@myhost ~]# fusion-icon
* Detected Session: kde
* Searching for installed applications...
* Using the GTK Interface
(fusion-icon:7540): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
* KWin is already running
* Setting window manager to Compiz
... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
* Setting window manager to KWin
I'm just using an xorg.conf that was generated with #X -configure, and have also tried one generated with hwd -x. Both detect "sis" as the video driver. Listing below...
Am I right to assume that this means that the video in not compatible with compiz? Or could it be some settings that need to be tweaked.
Thanks for any advice.
Rick
xorg.conf.sis generated with "#hwd -x"
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "sis"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
xorg.conf generated with "#X -configure"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "xtrap"
Load "GLcore"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "1033"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "TurboQueue" # [<bool>]
#Option "FastVram" # [<bool>]
#Option "HostBus" # [<bool>]
#Option "RenderAcceleration" # [<bool>]
#Option "ForceCRT1Type" # <str>
#Option "ForceCRT2Type" # <str>
#Option "ShadowFB" # [<bool>]
#Option "DRI" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "Vesa" # [<bool>]
#Option "MaxXFBMem" # 
#Option "EnableSiSCtrl" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "UseColorHWCursor" # [<bool>]
#Option "Rotate" # <str>
#Option "Reflect" # <str>
#Option "Xvideo" # [<bool>]
#Option "InternalModes" # [<bool>]
#Option "OverruleFrequencyRanges" # [<bool>]
#Option "RestoreBySetMode" # [<bool>]
#Option "ForceCRT1" # [<bool>]
#Option "XvOnCRT2" # [<bool>]
#Option "PanelDelayCompensation" # 
#Option "PDC" # 
#Option "PanelDelayCompensation2" # 
#Option "PDC2" # 
#Option "PanelDelayCompensation1" # 
#Option "PDC1" # 
#Option "EMI" # 
#Option "LVDSHL" # 
#Option "ForcePanelRGB" # 
#Option "SpecialTiming" # <str>
#Option "TVStandard" # <str>
#Option "UseROMData" # [<bool>]
#Option "UseOEMData" # [<bool>]
#Option "YV12" # [<bool>]
#Option "CHTVType" # [<bool>]
#Option "CHTVOverscan" # [<bool>]
#Option "CHTVSuperOverscan" # [<bool>]
#Option "CHTVLumaBandwidthCVBS" # 
#Option "CHTVLumaBandwidthSVIDEO" # 
#Option "CHTVLumaFlickerFilter" # 
#Option "CHTVChromaBandwidth" # 
#Option "CHTVChromaFlickerFilter" # 
#Option "CHTVCVBSColor" # [<bool>]
#Option "CHTVTextEnhance" # 
#Option "CHTVContrast" # 
#Option "SISTVEdgeEnhance" # 
#Option "SISTVAntiFlicker" # <str>
#Option "SISTVSaturation" # 
#Option "SISTVCFilter" # [<bool>]
#Option "SISTVYFilter" # 
#Option "SISTVColorCalibFine" # 
#Option "SISTVColorCalibCoarse" # 
#Option "SISTVXScale" # 
#Option "SISTVYScale" # 
#Option "TVXPosOffset" # 
#Option "TVYPosOffset" # 
#Option "SIS6326TVAntiFlicker" # <str>
#Option "SIS6326TVEnableYFilter" # [<bool>]
#Option "SIS6326TVYFilterStrong" # [<bool>]
#Option "SIS6326TVForcePlug" # <str>
#Option "SIS6326FSCAdjust" # 
#Option "YPbPrAspectRatio" # <str>
#Option "TVBlueWorkAround" # [<bool>]
#Option "ColorHWCursorBlending" # [<bool>]
#Option "ColorHWCursorBlendThreshold" # 
#Option "CRT2Detection" # [<bool>]
#Option "ForceCRT2ReDetection" # [<bool>]
#Option "SenseYPbPr" # [<bool>]
#Option "CRT1Gamma" # [<bool>]
#Option "CRT2Gamma" # [<str>]
#Option "GammaBrightness" # <str>
#Option "GammaBrightnessCRT2" # <str>
#Option "CRT2GammaBrightness" # <str>
#Option "Brightness" # <str>
#Option "NewGammaBrightness" # <str>
#Option "CRT2Brightness" # <str>
#Option "CRT2NewGammaBrightness" # <str>
#Option "Contrast" # <str>
#Option "NewGammaContrast" # <str>
#Option "CRT2Contrast" # <str>
#Option "CRT2NewGammaContrast" # <str>
#Option "CRT1Saturation" # 
#Option "XvGamma" # [<str>]
#Option "XvDefaultContrast" # 
#Option "XvDefaultBrightness" # 
#Option "XvDefaultHue" # 
#Option "XvDefaultSaturation" # 
#Option "XvDefaultDisableGfx" # [<bool>]
#Option "XvDefaultDisableGfxLR" # [<bool>]
#Option "XvChromaMin" # 
#Option "XvChromaMax" # 
#Option "XvUseChromaKey" # [<bool>]
#Option "XvInsideChromaKey" # [<bool>]
#Option "XvYUVChromaKey" # [<bool>]
#Option "XvDisableColorKey" # [<bool>]
#Option "XvUseMemcpy" # [<bool>]
#Option "BenchmarkMemcpy" # [<bool>]
#Option "UseSSE" # [<bool>]
#Option "XvDefaultAdaptor" # <str>
#Option "ScaleLCD" # [<bool>]
#Option "CenterLCD" # [<bool>]
#Option "EnableHotkey" # [<bool>]
#Option "ForceCRT1VGAAspect" # <str>
#Option "ForceCRT2VGAAspect" # <str>
#Option "MergedFB" # [<str>]
#Option "TwinView" # [<str>]
#Option "MergedFBAuto" # [<bool>]
#Option "CRT2HSync" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "CRT2VRefresh" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "CRT2Position" # <str>
#Option "TwinViewOrientation" # <str>
#Option "MetaModes" # <str>
#Option "MergedDPI" # <str>
#Option "MergedXinerama" # [<bool>]
#Option "TwinviewXineramaInfo" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "Silicon Integrated Systems [SiS]"
BoardName "65x/M650/740 PCI/AGP VGA Display Adapter"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

'not compatible with your current codelines' and 'Patch 7461070'

We are trying to upgrade EBS from 11.5.10.2 to R12.1.1 using Maintenance Wizard v2.15, and we are on "Apply Preinstall Patches" for "Perform the Upgrade". We got some strange errors:
(1). AutoPatch error for "Task: Apply Preinstall Patches":
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'xla' - codeline 'R12.XLA.A'.
Your current on-site codeline for the entity 'xla' is: 'R12.XLA.B'.
for "1-Apply patch 6832389 (Required)", "2-Apply patch 6625757 (Required)", "3-Apply patch 6648785 (Required)", "4-Apply patch 6166150 (Required)", "5-Apply patch 6146757 (Required)", "6-Apply patch 6757123 (Required)", "7-Apply patch 6172183 (Required)", "8-Apply patch 6774040 (Required)", "9-Apply patches 6976563 and 7351384 (Conditionally Required)"
(2). Got patch version mismatch errors when applying patch#7461070 for "10-Apply AD 12.1.1 upgrade driver (Required)":
###############################################################################SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv###############################################################################patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.There is a mismatch between the patch version specified and the releaseversion obtained from your Applications environment. In order to applyRelease 12 patches to previous Applications versions, the patch must be applied in preinstall mode.This can be done by passing the appropriate value to the preinstall parameter of eof_patch12.sh.INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
For first issue:
Verified first 2 patches:
Patch 6832389:R12.AP.A R12: Critical Pre-upgrade for R12
Patch 6625757 6625757:R12.XLA.A
These patches are for 12.0 upgrade, not for 12.1
Why MW is trying to apply these R12.0 patches?
For second issue I found Note 779466.1 Patch 6604842 fails during a R12 Upgrade via Maintenance
Wizard as DB still reports R11i
similar but at 12.0 level.
Shoul all customers follow the workaround and manually apply the patch?

I got similar error:
ACTION: execute on node: apps, patch=7461070, driver=u7461070.drv
patchit12.sh REMOTE SIZE: 53273 LOCAL SIZE: 53273
OK - no update needed for patchit12.sh, same size as on EOF: 53273 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
WARNING - patchit12.sh has been invoked on a non-R12 Applications system.
SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv
patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.
There is a mismatch between the patch version specified and the release
version obtained from your Applications environment. In order to apply
Release 12 patches to previous Applications versions, the patch must be
applied in preinstall mode.This can be done by passing the appropriate
value to the preinstall parameter of eof_patch12.sh.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Should patch 7461070 be applied manually?

My old tool bar is not compatible with Firefox 4 Beta. How do I get rid of 4 Beta and go back to my old Firefox browser?

One of my social networks, MyYearbook.com , has it's own tool bar, which I use extensively. But, for some reason, it is not compatible with the new Firefox 4 beta, and will not load.
How do I uninstall 4 beta and go back to my older version of Firefox?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F). 
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear. 
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11. 
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
*https://support.mozilla.com/kb/Menu+bar+is+missing
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Iphoto08 not compatible with RAW shot via Canon Powershot SD850 IS

Similar Messages

Maybe you are looking for