IPhoto09: How to backup all the structures ?

Hi there,
I think my harddisk is failing soon. I need to do some backups.
Can I know where can I find the folders currently that stores all the tree structures/subfolders/events in the iPhoto09 ?
I went to Macintosh > users > pictures & it only have jpeg files that I used for the screensaver.
Any ideas ?
Thanks

Terence Devlin wrote:
By default - i.e. unless you moved it - your Library is stored in your Pictures Foolder.
If it's been moved:
Select any pic in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window will open with the file selected. In column view it's easy to track back to the location of the Library.
Regards
TD
Thanks TD,
I did the "Show File" as suggested by you.
But apparently when you did show file, there are in:
Macintosh > Users > Pictures > iPhoto Library > Originals > .... etc where etc are all the events and subfolders.
But the problem is iPhoto Library is not a folder when you go via the Finder mode. When I clicked on the iPhoto Library, it opens up iPhoto & I cannot see the structure.
When I go via the "Show File" mode, there are folders shown after the iPhoto Library icon.
Any ideas how to backup my iPhoto ?
Thanks

Similar Messages

How to backup all the oracle database?

We build serveral database on the Oracle 8.0.5 for Linux. The
Linux machine will be re-install in the near future. It is
necessary to backup the databases.
After the new Linux machine is set up, we plan for installing the
latest oracle version, and rebuild the database and their data.
How to backup and restore the database?
null

Chris Rimmer (guest) wrote:
: You could just use Export to dump everything to a file.
: Alternatively, take a look at:
: http://technet.oracle.com/doc/server.804/a58396/toc.htm
: Wan-rong Jih (guest) wrote:
: : We build serveral database on the Oracle 8.0.5 for Linux.
The
: : Linux machine will be re-install in the near future. It is
: : necessary to backup the databases.
: : After the new Linux machine is set up, we plan for installing
: the
: : latest oracle version, and rebuild the database and their
data.
: : How to backup and restore the database?
To take a cold backup, shutdown the database. Then use the "tar"
command to backup all of the files that make up the database.
You should also backup the config.ora, and the initxxxx.ora
files.
null

How to backup all the tracks on a Zen Tou

How can I back up my Zen Touch aside from just using Nomad Explorer and copying over all the files?
Note: I don't want to backup the files is MediaSource, it doesn;t have all that is on my Zen.
Thanks!

You can use pretty much any of the software, aside from Nomad Explorer (which doesn't recreate directories). There are some ideas on this in my Nomad Primer.

How to backup all the views in a table

I want export all the view in a schema.
I used the below command:
expdp A12/A12 schemas=USER INCLUDE=VIEW directory=pump_dir dumpfile=expdp_VIEW.dmp
The command executed successfully but,
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 0 KB
Processing object type SCHEMA_EXPORT/VIEW
Master table "SYS"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
It seems nothing have been backed up..
I don't want to export specifically. Is there any way to upload all the views using export or any other way.
Kindly help me..
Thanks in advance
nonuday

Dean Gagne wrote:
This job exported views. You would not have seen this line:
Processing object type SCHEMA_EXPORT/VIEW
If the views were not exported. What were you expecting to see.
DeanYes, it even showed the export was successful, but the blocks size was 0kb.
If I import the dump which I took with the *"include=view"* export command, will the views imported?
And, can you please tell me when I googled about this it was mentioned *"Metadata of the objects(view,procedure,etc) will be exported"* can you explain it?
Thanks in advance,
Karthik

How to backup all my Firefox "Options", not the bookmarks and other stuff.

Under Tools, Options there are lot of settings that are lost when I have to reinstall. How to backup all my Firefox "Options", not the bookmarks and other stuff.

Hi, please see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]].
Also - [[Uninstall Firefox from your computer]].
Hope that helps.

How to backup all macs to the same airport time capsule?

How to backup all macs to the same airport time capsule?

They must all have access to the Wi-Fi network. Each computer should configure the Time Machine preferences and select the Time Capsule as the backup drive.

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

How to merge notes in iphone and ipad? how to save all the notes as backup so that it does not take up space

How to merge all notes from iphone and ipad together?
How to save all the notes in folder in external drive so that it will not take up space in iphone and ipad?

Becuse when I delte it still takes up. My memory I delted GBA4IOS a app from a website and still it takes 10GB of my memory.

How to export all the man page in mac to PDF?

How to export all the man page in mac to PDF?
I have tried "man -t cat | pstopdf -i -o ~/Desktop/cat.pdf" but this only output one page.
How could I dump all the man pages to pdf with one or few command as possible?
The other question is, I copy all the man pages form /usr/share/man, they are .gz.
After I unzip them and open with less, texteidtor, ultraeditor, all the formate are weird.
Is there any tool could open them with the right formate as man does?
I know the man in linux uses the tool "less" to read man pages. How about mac???

I use Bwana. Copy all and paste into TextEdit. Then, save it. This is the beginning for diskutil:
diskutil(8)               BSD System Manager's Manual              diskutil(8)
NAME
     diskutil -- Modify, verify and repair local disks.
SYNOPSIS
     diskutil [quiet] verb [options]
DESCRIPTION
     diskutil manipulates the volume-level structure of local disks. It pro-
     vides information about, and allows the administration of, the partition-
     ing scheme of disks, optical discs, and AppleRAID sets.
VERBS
     Each verb is listed with its description and individual arguments.
     list [-plist | device]
                List disks. If no argument is given, then all disks and all
                of their partitions are listed.
                If -plist is specified, then a property list will be emitted
                instead of the normal user-readable output. If a device is
                specified, then instead of listing all families of whole disks
                and their partitions, only one such family is listed. In that
                case, specifying either the whole disk or any of its slices
                will work. The -plist and device arguments may not both be
                specified at the same time.

How to reset all the entries wo exiting the program

Hi How to reset all the entries from the third and last wrong entry and back to first entry wo closing program. It works with the first and second wrong entry, not for third wrong entry.
Attachments:
access.vi ‏59 KB

The reset button does not work because when anything is entered in the operator field, and you press "reset", two events occur (1) a change is detected in the operator field and (2), a change in the reset is detected. Event (1) occurs first stopping the loop. The reset case is thus never reached.
One solution would be to sense the reset state in the "operator" event. You need to keep the loop running if reset is pressed. (See attached modification.)
Some other suggestions: Notice that I also made a data dependency between the case structure and the while loop. Without this, there is no guarantee that the case structure executes before the while loop and you might generate a race condition with unexpected results. I also re
moved the timeout event, it doesn't seem to do anything. The three text fields should be set to "limit to single line" in this application so fields can be finished by hitting the enter key).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
accessMOD.vi ‏65 KB

Lost all contacts and data after update iOS 7.1.2, how to recover all the data?

lost all contacts and data after update iOS 7.1.2, how to recover all the data?
it's very important to me...

Restore from your last backup file.

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can I backup all the photos on my iPhone to the cloud, then delete them from my phone to free up space?

Can I backup all the photos on my iPhone to the cloud, then delete them from my phone to free up space (but be able to restore them if I need them again?)

Thanx for the link...here's my problem. I built my windows pc and installed 2 hard drives...but the larger one isn't accessible right now...not sure why...but the solid state little one is full. This is a problem I need one of my kid's to help me address. I have a lot of photos 'cause my husbands into photography, we travel a lot, and somehow thousands of photos he took, plus ones I took, plus videos I took, ended up on my iPhone...and they are different in a lot of cases from the photos on the iPad that we share. I know I have 2 address this someday, bu don't have time right now...and I can't take any new photos or videos...or even add an app for that matter, until I free up some space on my iPhone. We've already taken two brief trips where I wanted to use my camera and couldn't...and I was looking for a quick way to address my picture taking ability...because we are leaving for another trip in a week, and another one right after that. This is probably way more info than you need...but there are probably duplicates...but until I go thru them I won't know. I could be wrong, but I thought when I backed up my photos to iCloud that all the photos in the photo app were backed up. Maybe I'm wrong and it's only those in the Photo Stream...in which case I should do something about that as well, 'cause I've upgraded our storage plan twice now...and it is getting pretty expensive...and I don't even know how to use it other than to do a complete restore when you get a new device which I just did recently because my son wanted our old iPad for a graduation present, and I kind of wanted the better camera on the new iPad, so I got one...and it took a week to retrieve everything from the cloud on our wi-fi! I hope this makes some sense to you, and appreciate any advice you have to share!

Hi, I have the new mac, and I cant find how to download all the audiobooks I've purchased, I've gone to purchased, but they are no where to be seen,m can anyone help. Robert

Hi, I have the new mac, and I cant find how to download all the audiobooks I've purchased? I've gone to purchased, but they are no where to be seen,m can anyone help. Robert

You cannot redownload audiobooks at all. The audiobook industry does not allow this.
As always have been the case, you should copy everything from your old computer, or your backup copy of your old computer, to your new one.

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

IPhoto09: How to backup all the structures ?

Similar Messages

Maybe you are looking for