Iphoto4.0.3 is not working!"Loading photos"never ends!

Time and time again,my Iphoto(4.0.3) doesn't work,"Loading Photos" is still going and I don't see my photos anywhere, is there any way to make it work normally? will I loose all my photos? Why is this happening?
Desperate Janet.

Janet,
Open your "Pictures" folder and find the folder named "iPhoto Library" inside. When you've found it, open the iPhoto Library folder, find the folder named "Albums", and temporarily drag it to the desktop.
Now try launching iPhoto again to see if the "loading photos" problem still exists.

Similar Messages

  • Import files not working, loads photos then wont import.

    Hello, I can load the images off the card, lightroom 5.7 but when I go to import nothing happens. I was working.
    Thank,
    Chuck

    Sounds like a similar problem to my grey screen....Frederick Bray

  • Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

    Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

    Hi Rogerya,
    Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
    How to Troubleshoot iSight - Apple Support
    https://support.apple.com/en-us/HT2090
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    1. See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    2. See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    3. Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    4. Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    - Matt M.

  • I am using I Photo 4.0.3. When I start it, loading pictures never ends and I cannot use I Photo; What can I do?

    I am using I Photo 4.0.3. When I start it, loading pictures never ends and I cannot use I Photo; What can I do?

    When did this begin?  Did you run any updaters just before this began and, if so, what were they? 
    That's a very old iPhoto version so give this a try:
    1 - launch iPhoto with the Command+Option keys held down.
    2 - select Options #3 and #4.
    4 - Rebuild the library. 
    If that fails to help continue with this:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, 
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • My Apple TV does not work and has never worked.

    My Apple TV does not work and has never worked. I replaced it twice and replaced my router and DSL modem but no luck. I spent hours on tech support with both apple and my ISPs with no luck. Any ideas? Is the Apple TV a donation to apple? I have had the device for 8 months but it will not work for longer than 15 minutes before it drops with network errors. All of my other devices work perfectly on the network including 2 iPads, laptops and an old wii. I love apple products and this is the first real disappointment I have had. The Apple TV seems like a major dud of a product.

    Seems unlikely you have had two faulty replacements, and more likely that there may be some network compatibility issue or problem with reception in the location the AppleTV lies - anything close to it that might be interfering?
    I am assuming you are connected via wifi - if you can try an ethernet connection to rule wifi issues out.
    Could you try it at somone else's house maybe?  If it worked there it would point to something specific at your location.
    You could try replacing it again I guess or seeing if they can offer you credit or a refund.

  • Acrobat Reaader will not work before I accept End User License Agreement. But where and how?

    Acrobat Reaader will not work before I accept End User License Agreement. But where and how?
    Have installed version 9.5 on my Windows 7 desk-top computer.

    I don't know what you mean by "where and how"; Adobe Reader will automatically present the license agreement to accept the first time you use it.

  • 16 gig nano problem- nike+ did not work when photos were loaded by iTunes.

    I recently got a lovely new purple nano for my birthday which appeared to work fine right out of the box. I let iTunes fill it up with a random selection of music and then there was no room for photos, but that was fine.
    I used it for 5 runs without problem, but today, every time I tried to start a workout, the nano would reset itself. Luckily I could revert to my trusty old nano.
    The first 4 runs had taken place without much customisation of the nano, and then I decided to choose my own music instead of having iTunes do it for me, but I also let iTunes choose and load photos on it. The 5th run seemed to work ok after this customisation, but that was it, attempting another run made the nano reboot itself.
    I have since deleted all the photos and Nike+ worked just fine again. I then chose to upload just a few photos, instead of letting iTunes fill the nano up, and again Nike + is working fine. So I've fixed my own problem, but thought I would post in case anyone else is having similar problems

    Jochemd,
    Since Black Monday, I have now deleted cookies, cleaned the cache and deleted all Temp Internet files 4x. I am on IE7.0.5xxx.x, on an XP-Pro SP3 laptop. All of the problems mentioned in my original post have continued, totally unabated.
    If you have a suggestion for me, please share it. I will try about anything now.
    Please note that, related to my OP, everything worked perfectly on Sunday PM, and well into the day on Black Monday. Since then, the issues that I outlined haver been present, and have not changed. The issue is not on my part, though I will attempt to correct anything on my end.
    The pleasure of helping others in these fora has been greatly diminished. I'd guess that about 10% of my posts used to include screen-caps, to direct the various posters, to the correct Panel, switch, Tool, or fly-out menu, to solve their problem. Now, all of my screen-caps have to go to queue. I have about 1500 of them in my Adobe folder, and add more, as the questions come.
    I can live with having to do Block Quotations a half-dozen times, and can Backspace out of those line breaks, but my camera icon is part of my life. Over in the PrE forum, I posted on Saturday afternoon, and that image just came out of queue tonight! Think about some poor Adobe user, lookng for the fix to their problem, with maybe a family event, at which they are hoping to present a DVD, and my answer has been in queue for 2.5 days.
    We do, what we do, with little thanks, and no remuneration, and it should behove Adobe to help us, help other users - ones who have given Adobe their $, and only want their program to function. We, the forum subscribers, can often help them, and save the bacon. That is something that the current Adobe T/S cannot do. Maybe next quarter, but not yet.
    Please help me to help others in the product fora.
    Hunt

  • I recently tried to burn some photos to a disc.  It did not work, but then I ended up with a .fpbf folder on my desktop.  Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

    I recently tried to burn some photos on a CD. For some reason, It did not work.  Now I have a .fpbf folder on my desktop. I can't seem to get rid of it.  I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes.  Doing so, does nothing at all.  And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?".   When I skip and continue burning, nothing shows up on the CD.  In the meantime, the .fpbf folder is still in my desktop.  I tried changing the aliases on each pic, but it still doesn't work.  Any ideas of how I can remove this folder from my desktop?
    Thank you.

    Beavis2084,
    Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
    Here's what I did:
    1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
    2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
    Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
    I don't know what to do anymore...

  • ISight in not working in Photo Booth, iChat, and VMWare with Snow Leopard

    System Info
    Model Name: iMac
    Model Identifier: iMac8,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM81.00C1.B00
    SMC Version (system): 1.30f1
    OS Version 10.6.1
    Symptoms
    iSight is not working, a blank screen is shown in the following Apps / VM
    1. Photo Booth
    2. iChat
    Visible to VM app, but unable to connect in Windows XP running on VMWare
    It is however viewable in Skype preference Video tab
    Visible in System Profiler under USB
    Following actions taken for troubleshooting
    SMC reset - by unplugging all cables over couples minutes, as well as CommandOption+PR key at boot time
    Repairing Permission on the Macintosh HD drive, rebooted after and didn't work
    Not user account specific, tried different account and the same problem persists

    Welcome to Discussions, Stanley Chung
    Sorry you are still having problems even after trying the good suggestions from Ralph and Boomer.
    I did not see specifically from your posts that your iSight worked before upgrading to Snow Leopard, but I am inferring from your topic's title that it did. If your iMac came with Snow Leopard installed, please post and tell us whether you erased the disk and reinstalled all your iMac's software before you started using it. If you upgraded your iMac to Snow Leopard, consider the following.
    (1) Until you get iSight working, do all your testing while no peripherals other than keyboard/mouse are attached to your iMac. To eliminate all possibility of any conflict external to your Mac, be sure you also disconnect any wireless devices (iPod, printer, etc) connected to your system.
    (2) If you still have problems with all you have tried, it seems to me that you must have a software issue. You might try uninstalling Skype and VMWare and testing again to see if those installations are causing a conflict.
    (3) Check the support sites for all of your third party software to be sure there are no known Snow Leopard issues and that you are using the latest compatible versions.
    (4) If the problem still exists and you have not already tried this, reinstall Snow Leopard, repairing permissions immediately before and after the reinstall.
    (5) If your problem remains and System Profiler still shows your inbuilt iSight as a USB device, I suggest you backup all important files, erase your disk, reinstall all Apple software, and test to see if iSight works properly. Once it does, you can install any necessary peripherals and third-party apps one-at-a-time, testing after each addition to see if one of them is causing problems.
    EZ Jim
    MacBook Pro (13 inch, Mid 2009) 2.26GHz w/Mac OS X (10.6.1)  G5 DP 1.8GHz w/Mac OS X (10.5.8) 
    G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  LED Cinema Display  External iSight

  • Audio not working in Photo Booth, video works fine

    When I record video in Photo Booth the video works fine, the audio does not work. I have looked through other forums and tried what they have suggested but nothing is working. I sware it worked once but now I can't figure it out.

    Lance Mcvickar wrote:
    I have listed it with google and you would think with the .com we would come in first in a search but we are slowly going further and further back in the listings and never made it to the top. Any insight as to why that might be.
    Lance ~ It could be because iWeb websites are not made to be search engine friendly. See this article:
    _SEO For iWeb: How to get your iWeb Websites into Google & Other Major Search Engines_
    By the way, a tip... Instead of posting your site's URL like this:
    www.thehorseyourodeinon.com
    ...include the prefix like this:
    http://www.thehorseyourodeinon.com
    ...then it will be easily clickable in your post. And before posting, you can switch from Compose mode to Preview mode to verify that the hyperlink actually goes to your site when clicked.

  • Flash not working in photo booth.

    The flash in photo booth on my iMac is not working.  When I take a pic, the screen flashes but the pic is still dark.  Was working fine yesterday.  I did install the latest osx today.  That's the only changes since then.

    In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick)  to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
    Martha

  • Places not working after photo has been edited...

    Hello All
    As the title states after I edit a photo in Iphoto (on the ipad, in either Photos or Adobe Express) the edited photo no longer shows in places.... Is this just the way it is? Does the geotag go away after editing? Should I be saving the edited photo differently? I know if I leave the original it will still show in places but I would prefer not to have both versions on my Ipad just the edited version, but I do like the Places tab/option....
    Any help would be greatly appreciated.
    Thanks :-)

    If you have the serial number for the installation and it is version 8 or higher you should be able to download it thru one of the pages linked below.  If you registered the software, you should be able to find the serial number information for it thru your Adobe account.
    If the above holds, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    Photoshop/Premiere Elements 8:
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    Photoshop/Premiere Elements 9:
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    Photoshop/Premiere Elements 10:
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Photoshop/Premiere Elements 11:
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

  • Why does double clicking not work in photos on my Mac Mini?

    Why can I not open a photo by double clicking my mouse in Photos App?

    Has nothing to do with ios6, the last update to the Facebook app did it. Mine has been like that for weeks on ios5.0

  • My previous programme to remove duplicate photos from iPhoto will not work in Photos. I feel I was tricked into buying a remove duplicate app from Apple which, after purchase, indicated it is only for iPhoto. Does anyone else have this problem. Does

    Remove duplicate photos.

    There is no Apple provided duplicate remover application. You must have bought a third-party application. Which application is it?
    Photos is very new, and there are only a few apps, that have been updated to handle Photos Libraries are:
    For example, these new apps claim to work with Photos:
    Power photos:  Fat Cat Software
    Duplicate annihilator: Brattoo Propaganda Software - Products
    PhotoSweeper: http://overmacs.com/photosweeper.html

  • Internal Microphone not working ... never

    Hi
    I'm using a Macbook Pro Late 13'' 2011 and trying to use the internal microphone which does not work in any case unfortunately.
    It's not a problem with Skype or other software. It seems that it never works.
    I've tried to adjust settings in the audio pane from the system preferences but it really seems to be everything ok.
    I've run a hardware test with no warnings. Everythng is fine.
    is there a way to maybe reinstall or reconfigure the drivers ?
    I haven't tried with an external microphone. All the other audio features are working fine.
    Thanks for the support

    Hi gmss,
    Thanks for visiting Apple Support Communities.
    You may want to try booting into safe mode to see if the issue persists:
    OS X Mountain Lion: Start up in safe mode
    http://support.apple.com/kb/ph11212
    If the microphone doesn't work in safe mode, try reinstalling Mountain Lion:
    OS X Mountain Lion: Reinstall OS X
    http://support.apple.com/kb/PH10763
    All the best,
    Jeremy

Maybe you are looking for