IPhotos doesn't show photos anymore, but iPhoto file is 30 Gb big.

Hello,
my probelm is that when i klick on the iPhoto fiel, it opens the file and than says no fotos. It changed from one day to the next. I hade my libery on a other harddisk, but it allways worked. Now I have the 30gb big file but I can't get the pics. Does anybody has the same problem or nows a way to get beck my pics?????

Thanks LarryHN for responding to the OP's question. Your answer solved the problem I had been having and I'm a lot less anxious about my digital images now.
But now I have two questions that I'm hoping someone can answer:
1. I downloaded some new images while my iPhoto was not using the right library. Using the alt/opt key, iPhoto is now pointed to the right library the majority of my images appear. But where are the ones that I downloaded while it wasn't pointed at the right library? I searched my hard drive for another iPhoto library and couldn't find anything?
2. A related question, I have some images that I KNOW are on my computer as I can see them in Finder. The location for them is given as iPhoto library/data/2008/July 28. But, they do not show up in iPhoto. Anyone know where I can find them to import them?
Thank you so much for any help!
Rosie

Similar Messages

  • IPhoto doesn't show thumbnails anymore

    I actually figured this out- I am posting this as a solution, not a problem. It frustrated me but I figured it out.
    THE PROBLEM:
    You click on an "event" and it brings up a picture from that event, however you can only see one picture. Clicking left-right on either the buttons or the keyboard move you to different events, not to different pictures. You have tried to go to "View -> Thumbnails -> Show" but it's all gray, meaning theoretically you ARE in thumbnail view, even though you can only see the one picture.
    THE REASON & SOLUTION:
    The possible reason you are having this problem is the magnification slider in iPhoto on the bottom right. While in thumbnail view, apparently, you can zoom all your thumbnails in to a point where it's only showing one picture- but you cannot browse the rest of the album or event this way. If you are having the problem above, then your magnification slider should be all the way to the right. Move it to the left, and other thumbnails should start to appear. Eventually you see all your thumbnails again. You can still scroll through all the photos using the full-screen thumbnail view by clicking/scrolling up and down, not left to right. There should be a scroll bar visible on the right. Its not obvious like on these discussion boards, but its there.
    Hope that helps. I would like to have Apple change this behavior- it will deffinetly frustrate a lot of people.

    this is a known bug (or maybe a "feature" - who knows)
    Please provide feedback to Apple re this to be sure they understand users view of it - iphoto menu ==> provide iPhoto feedback
    LN

  • Iphoto doesn't show photos in other user-account

    Hi,
    I have the iPhoto-Lib in the public folder of my user-account. All other users have full access to this folder and subfolder. When another user logs in and opens iphoto (no other user has iphoto open) it shows the preview off all pictures. He can open older pictures by double click. Newer Photos are not shown after double click. An triangle with exclamation mark shows up shortly after the picture was shown.
    When I login all the pictures are shown as preview and after double click.
    Any ideas?
    Peter

    Using that form of sharing the Library should be in the Users/Shared folder, not the Public folder.
    However, lots of people report permissions issues with this form of sharing and instead I suggest using an external HD set to ignore permissions and formatted Mac OS Extended (Journaled)
    Regards
    TD

  • IPhoto doesn't show photos from shared albums

    I enter iPhoto and I can see the folders shared with me .....however no photos are inside these folders.
    One shared album was created by me via my iphone and shared with 20 people. I can see the photos on the phone and my ipad without issues but not on my MBP. MBP is running Yosemite and iPhoto 9.6.
    Someone shared an album with me yesterday. Same thing. I can see the pics on both iphone and ipad but not on MBP. I can see the title of the album but it simply says "No Photos".
    This is very weird. Please post if you know the answer to this issue.

    I would turn off the iPhoto iCloud options and go to the system preferences and log out of iCloud - then log back in and turn the iPhoto options back on to refresh everything
    LN

  • IPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black.

    iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ?  I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.

    What version of iPhoto are you using?  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • IPhoto does not show photos in my iPhone

    Hi!
    As the title has said, my iPhoto does not show photos from my iPhone, but it DOES recognize that iPhone is connected.
    But before all of this happened, I changed my setting (which I forgot how to reset that) to NOT open iPhoto automatically when my phone is connected.
    And also, a week ago, my iPhone usb cable seems to be spoiled at one end. It can still connect the phone to the laptop, but very loosely - as if some wires inside are broken.
    So I really do not know if the problem I mentioned is caused by my setting OR is it because of my spoiled cable (that it could not transfer the photos from the phone)
    And if it is believed that it is caused by my setting, could you please guide me on how to re-set the whole thing?
    Thank you very much.
    Ps. I can still sync my songs in itunes to my music in iPhone.

    "But before all of this happened, I changed my setting (which I forgot how to reset that) to NOT open iPhoto automatically when my phone is connected."
    Launch iPhtoto.
    In the menu, iPhoto>Preferences>General.
    Change it back.

  • Iphoto is not showing faces anymore.

    Hello everyone.
    For some reason, my Iphoto is not showing faces anymore. All faces I've cataloged are still there, but it shows only the names. And there are many more others to identify, but It's impossible, because the menu shows only black thumbnails.
    All the other features of the app are working fine and all my pictures are shown on the other menus, like "events" or "albuns" for example.
    What can I do to solve this problem?
    I have already updated to Iphoto 11, my OS is Mountain Lion (last update 10.8.2).
    Thanks.

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #2 to rebuild the thumbnails.  It may several attempts.
    OT

  • Why my iphoto doesn't show any of my picture?

    I accidently deleted some of my file, and since then my iphoto doesn't show any of my pictures, i mean nothing comes up when I click on it.

    I would post in the iPhoto forum:
    https://discussions.apple.com/community/ilife/iphoto

  • LR 4.4 works but doesn't show photos?

    My computer died and needed a lot of work, including a new mother board and new graphics cards. Now LR 4.4 doesn't show photo's. LR seems to be working well in every other way but where the photos should be the spaces are blank. I vaguely remember something like this happening before but I don't remember the solution. Any suggestions?
    Thanks,
    Doug

    The drive names are the same and LR is still listing the HD names and files correctly.
    From this screen shot you can see that LR finds the files and their sizes and ratings but there are no images.

  • Western digital hard drive doesn't show up anymore

    I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

    Hi there
    Sorry to hear you are having trouble with your Mac.
    Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
    If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
    You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
    Cheers

  • HT1222 I need to update my husbands iPad but it doesn't show a update but he has ios4

    I need to update my husbands iPad but it doesn't show a update but he has ios4

    If you mean that it doesn't show the Settings > General > Software Update option then that only appears when you have iOS 5+ installed, with iOS 4 you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change - but google have app versions in the store.

  • Apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

  • Iphoto won't share photos by email, share file won't open.

    iphoto won't share photos by email, share file won't open. what do I do?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • IPhoto 4.0.3 wont show photos anymore !

    I don't understand what's happen. iPhoto 4.0.3 doesn't show my photos anymore. All folders source are present, Photo Library is there with all the rolls, rolls self could open, taking more or less space on screen, but doesn't show anything.
    Looking into Pictures/iPhoto Library ( What a mess !) in the Mac itself I can see all my pics and even open it... with Preview !

    I tried to rebuild my library from iphoto 4.0.3. The library loads, and then starts to repair when the application quits unexpectedly. Any hint? In the meantime, my pics are empty grey boxes, although they seem to be there in terms of disc space. This happened for no obvious reason. Cannot see them nor edit them.
    Thanks

  • IPhoto doesn't show magnified photos

    iPhoto shows only thumbnails and when I doble click on a photo, only change the bottom bar tool, but the display doesn't refresh and the thumbnail photos keep showing on the screen. Also when I select Edit a photo, the display area where it was supposed to show the full size image keep black.
    I right click on a photo and choose ->Show File and I see that the photo's path is Macintosh_HD/users/AngelSolorio/Pictures/iPhoto Library/Originals/2007/Madrid/"x".jpg. And the size is 3.1 MB.
    However, if I doble click over any image in my Hard Drive, Preview doesn't show anything.
    Someone can help me, please?

    How are you getting the images into the library? You must import them. This is from the iPhoto help:
    In addition to transferring photos from your digital camera, you can import photos from a flash drive, memory card reader, CD or DVD, or other locations on your computer’s hard disk.
    If you’re using Mail, you can drag photos directly from an email into iPhoto. To import photos received when using another email client, including webmail, or when downloading photos from the web, first save the photos to your desktop or in a folder on your hard disk.
    You can also scan photos and save them on your computer or save emailed photos on your hard disk, and then import them into iPhoto.
    iPhoto supports popular file formats such as JPEG, TIFF, and RAW. Other formats also work but are not fully supported.
    To import photos without a digital camera:
    In iPhoto, choose File > “Import to Library.”
    Navigate to the location of the photos you want to import (for example, a CD icon on your desktop or a scanned photo file saved in a folder on your hard drive).
    Select one or more photos, or select an entire folder or disk.
    Click Import.
    You can also drag individual photos or an entire folder from the Finder into the viewing area. If you drag a folder, one or more Events are created based on subfolders and the dates the photos were taken.
    IMPORTANT:Wait until all photos have been transferred into iPhoto or click Stop Import before ejecting a memory card, CD, or DVD.
    NOTE:Some card readers may not be compatible with iPhoto. For more information, check with the manufacturer of the device.

Maybe you are looking for

  • Oracle.jbo.NoDefException: JBO-25002: Definition

    Hi, In my custom webcenter application I created a page with Document Library. If I run in embedded WLS works fine, but when I deploy in remote WLS doesn't work anymore. In remote WLS if a access my page I get this error: oracle.jbo.NoDefException: J

  • "SELECT" problem

    Hi everybody, select s012matnr sum( s012menge ) sum( s012wemgm ) from s012 into corresponding fields of table it1 group by s012matnr. i am having problem with the query mentioned above. grouping by matnr is successful but summing of menge and wemge d

  • Kernel cnfiguration to get packet injection working with iwl4965

    Hello, I'm trying to configure my kernel to be able inject packets with intel wifi card using iwl4965 driver. According to this: http://aircrack-ng.org/doku.php?id=iwlagn i need configre wifi options like this: Networking -> Wireless : [M] Improved w

  • Project Versions: Plan Work and Actual Work

    Hi, Can you pls suggest me, where can i get Project actual work and planned work from R/3. which R/3 table will provide this information for different Project Versions. Thes values are required against each Project version. Your valuable inputs will

  • Help Transferring Old 8mm Videos into Final Cut Xpress

    Like a lot of people, I have a bunch old 8mm tapes. I'm trying to find out what camera I should be looking for in order to use a Firewire connection to my Mac Pro to get this footage into FCE, but I don't want to make a mistake and buy something that