IPI: No exhange rate indicator

Hi,
I was trying to execute IPI from consolidation monitor and system
prompted for the following error messages:-
1) No exchange rate indicator for balance sheet items for period 2007/1
2) No exchange rate indicator for income statement items for period
2007/1
The IPI design involved only local currency hence i don't need a
exchange rate indicator to perform any foreign currency translation.
Please advise.
Regards, Renee

Hi pls check foreign curency valuation method  in that few check boxess or there which u need for ur requirement that one uselect . i think as for ur issue u did selecte reset checkbox pls remove that one
Once u selected reset check boxt then the open items are valuated at the aquisation price . this way the valuation differenceis set zero.the old valuation method is reset.so the account determination is reversed:the revenue that arisesis posted to the expence account.
Rgds
ANAND

Similar Messages

  • IPI - No exchange rate indicator

    Hi,
    I was trying to execute IPI from consolidation monitor. I got error message stated that no exchange rate indicator for Balanca Sheet Items for period 2007/001.
    The IPI design involved only local currency hence i don't need an exchange rate translation.
    Pls advise. Many Thanks
    Regards, Renee

    Just a flexibility to use the type or indicator.
    As you correctly mentioned, indicator is linked to a particular type.
    It's simply easier to use several indicators comparing with potentially several hundreds of types.

  • Currency and exhange rates data distribution to flat file

    Hi All
    I have a situation like i am sending the all  BI data to flat files but my problem is how can i send the currency exhange rates(TABLE:TCURR) data to flat files, is it possible using open hub desination or any other methods available please suggest me.
    Regards
    vasu reddy
    Edited by: bvasu reddy on May 31, 2010 4:16 PM

    Hi,
    If i assume correct you want to supply ur data into flat file on daily basis.
    You can use APD to Do this both in BW3.5 and & BI 7.0.
    Creating dataflow in APD is pretty simple like process chain.
    What you can do is select "table" as a data source and "Flatfile" at datatarget (both on client server or on desktop).
    You will get APD option in RSA1 screen.
    After creating this APD you can schedule it on daily basis etc.
    Thanks and regards
    Arun

  • Exhange rate calculations in SAPScript

    Hi,
    I am trying to calculate the total invoice amount for different currencies in a  SAPScript.    I am running into a couple of  problems.
    1:  I cannot seem to find the exchange rate ( KURRF ) in KOMK/VBDKA or VBDKR, do you know where else the exhange rate would be populated?
    2: I cannot seem to use the commands: /: DEFINE &my_variable&
                                                                    /: &my_variable& = &KOMK-FKWRT& * &KOMK-KURRF& (pretend KURRF is populated)
                           is it even possible to do that sort of calculations in SAPScripts? if not, what is an easy way to accompolish this?
                          I only need to calculate this once.
    thank you.

    u can use FM to get the value in print program..and pass them to the sap script...
    The conversion rate is stored in TCURR table...
    CALL FUNCTION 'CONVERT_TO_FOREIGN_CURRENCY'
            EXPORTING
              date             = <fs_komv>-kdatu "<<date of convertion
              foreign_currency = komk-waerk
              local_amount     = wa_komp_o-netwr "<<value to convert
              local_currency   = <fs_komv>-waers
            IMPORTING
              foreign_amount   = <fs_komv>-kwert  "<<Converted value
            EXCEPTIONS
              no_rate_found    = 1
              overflow         = 2
              no_factors_found = 3
              no_spread_found  = 4
              derived_2_times  = 5
              OTHERS           = 6.

  • Fixed rate indicator flag in transaction OC47

    Hi,
    There is a flag which can be used when we maintain exchange rate types in IMG or transaction OC47.
    2) Fixed rate indicator flag : Exchange rate type useS fixed exchange rates (field XFIXD in table TCURV)
    What is the functionality behind this flag ?
    Note: I have gone through SAP documentation but it is not very clear...
    Regards,
    Rajesh.

    Hi......
    Instead of calculating the exchange rate the system takes a fixed amount while you enter the currency in any transaction.
    SAP Documentation is something like this:
    Indicator: Exchange rate type uses fixed exchange rates
        Describes an exchange rate type that works with fixed exchange rates.
        Exchange rate fixing affects the application if exchange rates are to be
        calculated from currency amounts you have entered. In this case, the
        system may continue processing using the fixed exchange rate instead of
        the exchange rate calculated. If exchange rates other than the fixed
        exchange rates are used, the system displays warning messages or error
        messages.
    Example
        1. As from 01.01.1999, the currencies of the Member States of
           European Monetary Union are fixed.
        2. If the exchange rate type is G (which functions as the bank buying
           rate to the average rate M) and this indicator is set, one fixed
           exchange rate only is used.
    Award points if useful
    Thanks
    Aravind
    Message was edited by:
            A.Aravind

  • Exhange rates globally or cc level

    can exhange rates be entered globally or only at cc level. I mean if there are 4 ccodes in different areas like CAD,MX,USD and japan can we enter exhange rate at global level(company level).IF so how can it be done and what are the pros and cons
    Thanks in advance
    Vikram

    Exchange rates entered are applicable across the company code. Exchange rates are not entered company code specific. If you  would like to have company code specific rates, may be you can explore exchange rate types.

  • Exhange Rate updation at query Level

    Dear Experts,
    While running SAP query choosing currency translation option "Conversion type on posting date", all the data takes effect with latest exchange rates.
    Ex. Data for the period May-08 takes effect of exchange rate of the month of Jan-09 i.e. USD =48.90000 instead of exchange rate 40.50000 which is for May-08.
    We want figures takes effect with respective months' exchange rate. We are updating exchange rate on periodic basis in BI. Pls suggest.
    Thanks,
    MMSl

    Hi,
    check this link
    http://space.itpub.net/15232446/viewspace-521037
    Thanks
    Hema

  • Exhange Rate not working in sales order

    Dear all,
    I am facing a problem with exchange rate, I have maintain exchange rate procedure in customer master with exchange rate INR 70 = 1 EUR, Now I am creating Sales order where as i m changing Exchange rate INR 65 = 1 EUR, in sales document header as well line item, but surprisingly system is not considering 65, it is only considering 70, But i want system must consider 65 which i m manually changing in sales order.
    Please suggest me to solve the problem
    Regards
    Shambhu

    Shambu,
    After changing the Exchange rate are you updating the price by going to Item conditions? If not then update the price by clicking on update button and then select B : Carry out new pricing.
    Thanks,
    Raja

  • Remove Exhange Rate Difference JE from Aging balance

    Hello,
    I'm using the Exchange Rate Differences transaction, every month since a lots of time now. So I have JE generated for all my marketing document open at the time of the transaction.
    The transaction create JEs with the BP and my exchange account.
    When I look at the Vendor/Customer. Liabilities Aging, there are all the JE created. I'd like to know what can I do to remove them from the list
    Thank you
    Sébastien

    Hi Sébastien,
    When you do the end month revaluation, shouldn't you check the "Auto. Reverse" option and execute the reversal in the subsequent month? Revaluation purpose at the end of the month is merely for reporting. That's why you should post the revaluation result into a unrealized gain/loss account, reverse it at the starting of subsequent month. Hence, your A/R aging for all business partner will revert back to condition as you expected.
    Best Regards,
    Hendry Wijaya

  • Asset Depreciation posting at historical exhange rate in Non-leading LEDGER

    Hi Dear collegues
    Our client would like to post depreciation at historical exchange rates, but only at certain non-leading ledgers.
    So in leading leger the exchange rate should be at the posting day exchange rate, and at the other ledgers should be at historical ledgers. We were thinking that the bes way is to have one valuatio area in Local Currency linked to leading ledge and another asset area attached to the non-leading ledger with a parallel currency area (with historical values). Do you agree with this perspective ?
    thanks

    Yes you are right, but in our case we have parallel depreciation areas that are posting depreciation document to diferent GL Ledger books.  (Dep areas are linked to Ledger books)
    So we just are looking for posting at historical exchange rate in one of that no-leading ledger. The rest of areas an Ledgers should post at posting exchange rate
    thanks

  • Exhange rate at header level

    Hello Sap Guru
       This is extremely Urgent .I posted document and when i am check in FB03 (accounting view) .I can't see exchange rate tab at header level, Though currency is mainatined as INR(Local) and USD(group).So its not calculating the exchange rate and KOC4 (proce varience report is coming wrong.
    Please help.

    Hello Deepak,
    Check document currency is USD or not ,if your local currency is INR. & also check in BKPF table where excahnge rate would update with respect to company code | document numnber | Year. If not updated and your document currency is not equal to local currency ,send screen shot for guidance on this subject.
    Regards
    Mani

  • Table for exhange rate changed on

    Hi
        Table for exchange rate is TCURR. and where can i find the changes done and changed by.
    what is the table to find the "changed on" and "change
    thanks

    Hi Sameer,
    Pls check in the following tables:
    SE16n_cd_key and se16n_cd_data
    You can find the required info. in the above mentioned tables.
    Regards,
    Mohan.

  • Realized Exhange rate in Group Currency

    Dear all,
    I've issues with Group Currency. I have 2 company codes, one (1000) uses USD & one (2000) use SGD. Group currency is USD.
    In company code 1000, I have customer invoice in 1000 USD. After that, I post without clearing for customer payment 1000 USD. Then, I clear this customer by t-code F-32 (also curency USD)
    Normally, when clearing customer by this t-code, system with generate a document with has no entry. But in my system, when do this, system will generate an entry like this:
    In document currency
    Debit Customer 0 USD
    Credit Realized ExRate 0 USd
    In Local Currency:
    Debit Customer 0 USD
    Credit Realized ExRate 0 USd
    In Group Currency:
    Debit Customer 1000 USD
    Credit Realized ExRate 1000- USd
    So, the result will be wrong when I issue consolidation reports at month end.
    Do you know how to correct this ?
    Thank you very much for your help,
    Best regards,
    Sylvecat.

    Hi pls check foreign curency valuation method  in that few check boxess or there which u need for ur requirement that one uselect . i think as for ur issue u did selecte reset checkbox pls remove that one
    Once u selected reset check boxt then the open items are valuated at the aquisation price . this way the valuation differenceis set zero.the old valuation method is reset.so the account determination is reversed:the revenue that arisesis posted to the expence account.
    Rgds
    ANAND

  • F150 dunning prog. and Gregorian calendar-wrong interest rates calculation

    Hello everyone,
    I have a problem with F150 - dunnning program and the Gregorian Calendar. I defined a interest rate indicator and I choose Gregorian calendar - 365 days in the year but SAP calculate 360 days and the interest rates are wrong u2013 to high. I have found the OSS note 82995 - Dunning program interest calc. on 360 not 365 days u2013 but as a matter of fact there is no solution which is appropriate for me because I want to print interest along with dunning letter. Maybe you had had the same problem and maybe you found solution.
    Thank for you help
    Tom

    FSKB     G/L Account Posting
    this transaction is not working

  • EXchange rate problem

    Hi BW experts,
    I getting following error in report :
    <b>No exchange rate from CAD to USD and date 28.02.2007 found (currency transl. TRAV/TRAV)
    Notification Number BRAIN 380</b>
    I am getting this message for only 4 months i.e March April,May,June but rest of months its fine.
    Currency translation is done in query with a variable.
    I tried the following solutions:
    1.transfer Exchange rates from source systems Via Program :RSIMPCURR
    2.I checked in Table TCURR and there exists a exchange rates between CAD to USD.
    3.I checked TCODE: RSCUR the variable exists and created properly.
    4.I searched through forums but none of them present a clear solution.
    SO can somebody help me to solve this error ,its very urgent
    null
    Message was edited by:
            NRUPAL CHOWDARY

    So check in OB08 which gives the overview of Currency Exchange Rates for each month.Check what is the exchange rate maintained for the months u r looking into.
    Else ask the users what exchange rates they maintained for those months and upload the exchange rates for those months.
    Here is the link which will explain how to load the exhange rates.
    <u>http://help.sap.com/saphelp_nw04s/helpdata/en/36/412ad80cb511d5b2df0050da4c74dc/content.htm</u>
    Thanks & Regards,
    Suchitra.V

Maybe you are looking for

  • Debit  created by mistake  and  cancelled-any  effect

    our  client  is having sap4. for  sales returns  instead  of  credit note   debit note  was  created  as result  of the mistake   debit note  was cancelled now  they  have  to  create  a  credit   note  will this cancellation of debit note has  any e

  • How to add connection between two Web Part Data Views in sharepoint designer 2013

    Hi I have problems with connect two data view I have a SQL server database named Mini In Mini database I have two tables:  dbo.Table_A and dbo.Table_B Table_A design and Table_B design In the internet browser it look like this after I add the connect

  • Fetcher did not finish - Error in URLScraper

    ERROR: URLScraperProvider.getContent(): fetcher did not finish! I get this error but the HTML content is scraped and displayed properly in the channel. Why is this error ocuring? I have set teh channel timeout to 5 minutes.

  • I downloaded a trial of Dreamweaver CS6 CC - Missing Elements

    The search bar which should be located at the top right-hand side of page is missing, so are the predefined workspaces such as 'classic' and 'developer'. I have just started hosting & developing and was thinking i would invest in the entire CS6 suite

  • Move-Copy seems to be off

    I am using the Move/Copy command in InDesign 5.5 and it seems to not be accurate. I am duplicating a line a set distance, 1 in, and once I get out to 12 inches, I am losing about  1/32 of an inch. I print it and then measure the distance from the fir