IPIVR connection to business systems

Is it possible for a IPIVR to use SSL when conencting to a business system gateway for processing credit cards ? Let me add to this, usng the java method.

Hi,
the short version: yes, that's possible, but...
The longer version: yes, that's possible, but you'll have to do some Java programming around it.
If I were you, I would build a Java package that would use Apache HTTPClient for connecting to the business system. Take a look at this: http://hc.apache.org/httpclient-3.x/sslguide.html
G.

Similar Messages

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Same Business system to two XI/PI landscapes and possibly two ESR's

Hello,
We are setting up a new PI 7 landscape in parallel to our current XI 3 landscape.
We do not foresee a migration of XI to PI in the short run so the two systems, XI and PI will run next to each other.
The problem we then have is with the ESR and proxies. The same business system must be able to connect to both XI and PI and must also be able to generate proxies with interface content from XI as well as with interface content from PI.
The connection from business system to ESR repository seems to be 1:1, only one ESR per business system (defined via SXMB_ADM)
Is there a way to allow ESR content from two XI/PI systems in one business system simultaneously?
How do we solve this issue?
Thanks
Tom

Hi Tom,
as you already said its 1:1 connection between ESR and business system. The connection is taken from the exchangeProfile, refer to [ABAP Proxy Generation on SAP help|http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm].
I suggest you to create the interfaces in XI, generate the proxies and transport to PI.
How are you going to use the to integration servers for ABAP proxy scenarios? I am asking because you only can use one integration server at a time for outbound ABAP proxies in SAP standard. You define the URL or RFC destination to the corresponding integration server in SXMB_ADMIN.
Regards, Martin

Business system connection to XI

Hi,
I would like to connect business system R/3 4.7 (web as 620) to An XI system - PI (process integration netweaver 2004s) - do i need to install on the businees system the appint add-on?
according to note 721160 the add-on must be installed but this note is talking about XI 3.0 and my system is based on netweaver 2004s (process integration - formely XI)
Moshe

Hi,
>>Do i need the appint add-on on the R/3 620 system for proxy?
If your SAP R/3's WAS< 6.20 means you have to do this activity.
If ur SAP R/3's WAS is >=6.20 means not necessary.
Check this for refference
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Mar 20, 2008 10:57 AM

General XI Connectivity activities in the business system to connect to XI

Hi,
Is there any general/common XI connectivity activities/configuration to be done for a business systems (both SAP and Non-SAP) to preparfe it to able to talk to SAP XI ? Is there any mandatory tasks (sort of a checklist) to make a business system to be able to integrate it with SAP XI (apart from specific configuration).
The SAP XI Master guide talks about XI Connectivity add-on client to be installed in the business system. I am not understanding as to what does that mean. For Example, if i want to integrate SAP SRM business system to SAP XI, what are the minimum XI connectivity related activites to be done on the SAP SRM system.
I appreciate your input in this regard.
Regards
Ganesh

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

SLD Connection IB: Can't find business systems: InternalEOAService

Dear experts,
I have connected my SLD properly to the IS. SLD_CHECK is successful. But I can not access the business systems from the integration builder. I get this message:
========================================================
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
========================================================
What's wrong. Performed J2EE restart and SXI_CHACHE refresh.
Can also not import configuration objects due to the fact that it thinks that certain business systems do not appear in the SLD. But they do....
Please suggest?!?
Kind regards.

Forget about the SLDCHECK. that is completely irrelevant here and only deals with the abap communciation.
Your issue relates to the JAVA communication with the SLD.
You need to successfully register the JAVA stack with the SLD. In the Data Supplier, does this work for every page? You are interested in the CIM Data tab...
You may have to make alot of manual associations, but until you can register the other components, there's no point.
Can you specify your version and whether or not the Template Installer was successful and whether you have checked the post installation tasks?
Also check this note: https://service.sap.com/sap/support/notes/939592

** SPROXY is not working properly in Business System

Friend
My SAP Business System is having Ver 7.00. This system is already connected with our XI server. I face 2 problem when execute SPROXY tcode in this system.
1) System asks username & password for every click.
2) Whatever I have created SWCVs in IR, only SWCV names are displayed there are no objects under that.
I troubleshooted the following things.
I have run the following reports.
1) SPROX_CHECK_HTTP_COMMUNICATION - HTTP Communication is working fine.
2)SPROX_CHECK_IFR_RESPONSE - We get the response.
3)SPROX_CHECK_IFR_CONNECTION - Integration Builder connection is working properly and Data understood.
When I run the 4th report, SPROX_CHECK_IFR_ADDRESS, the data in the SPROXSET table is not shown.
Actually when I checked the data in the SPROXSET table, there is no data in that table.
Friends, how do enter data in SPROXSET table ? How to bring all the objects in SPROX under SWCVs.
Could you kindly help me to solve the above 2 issues ?
Thanks in advance.
Kind Regards,
Jegathees P.

Actually
when you run the SPROXY it does 2 things
1. can take the rep information from the table
2. can take the rep info from the exchange profile in the SLD
if you want the sproxy to take the data from the exchange profile do the following:
RFC Dest: should work fine.
LCRSAPAPI
SAPSLDAPI
SLDAPICUST should work fine?
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
Message was edited by:
n Khan

Error Connecting SAP Business One and Crystal Report

Hi All,
I installed Crystal Report 2008 on my system for creating a report in Crystals.
I clicked on "New Report" and it opened a window called "Database Exert." However, when I look in the Database Expert, I cannot see "SAP Business One" in it. How can I connect SAP Business One 8.8 with Crystal Report?
Regards,
Bharath S

Hi
On your computer, locate the Crystal folder according to the following directory path: C:\Program Files\SAP\SAP Business One\Crystal. Then double-click the file: SAP Business One Crystal Report Integration Package.exe. and follow the step of the setup status screen.
Regards
Christian Carrasco

Add a new employee - Connection is busy with results for another command

Hi all,
I try to add a new employee in my SAP Business One system, but I get an error message like that : [Microsoft][SQL Native Client] Connection is busy with results for another command * (HEM5) (HEM5)
So I try to see if I get the same message when I update an employee, and I don't get this message.
Do you have an idea, why I get this error message when I add a new employee ?
Message was edited by:
Marc Riar

Hello,
I am afraid there maybe two users / workstations using the same user code and one of them is creating (add) and other is update. Try to ask the users/wrokstations.
Another way out is try to run this query :
select * from HEM5
Rgds,
JM
http://groups.yahoo.com/group/SBO_Knowledge_Village
[email protected]

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Business system and logical system names

hello experts,
Right now m creating scenarios of IDOCs, Files and RFCs. Just wanted to know that is it compulsory to give Business system name and Logical system names same?
Does it make difference if i will give both names different?
Regards,
H.S.

Hi,
I guess i have not explained you proprely.
Here logical system mean m asking abt the system name which we are using in RFC connections to make connection between two systems.
does Business system name and Logical system name should be same?
Actually right now we have done system copy of production system into our sandbox. So all the things are pointing to the production system.
I was just wondering, if i will just change ip/ hostname into the Technical system (ip of sandbox system) and keep business system name as it is( which is right now of production system)... then for me no need to create all ID Objects again. Its just an idea. So just wanted to check is it ok... bcz in ID i have more than 60 objects which i need to create again. and i have very less time
Or if anyone can tell me any good idea to do that.
Thankx in advance.
Regards,
H.S.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Business service or Business system??

Hello All,
I do get confused with respect to Business service and Business system?? What differentiates between them and when accordingly are they used??
If I am using a HTTP adapter to connect to a URL address of a 3rd party system, what would be my steps in Intergration directory involve?? I get lost in receiver determinations and interface determinations and their purpose...
Thanks,
Kenneth

Hi Ken,
Basically business service will be used only for published services and not those which have a physical landscape set up. If there is a physical landscape available then we go for business systems.
Receiver determinations talk abt the receivers available for an outbound interface and interface determination tell you abt the interfaces ( both outbound and inbound) in play and their mapping pgm involved.
Hope this was helpful and any add ons are also welcomed.
- Teresa

Business Service -- Business System

Hi all,
I've read several tutorials about scenarios in XI and have seen that sometimes business services are used and in some cases they use business systems to implement a communication partner. When do I use business services and when do I use business systems?
Thanks in advance and regards,
Marc

Hi Marc,
You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
Business System is always configured in SLD and you use it when you have all the data you need to connect to the partner system
Michal: correct me if I am wrong.
Regards,
Padmaja

Role of business system in SLD

I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?

Hi,
it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
If you are not using PI, then it is not relevant - you should leave both fields empty
regards,
jaime

IPIVR connection to business systems

Similar Messages

Maybe you are looking for