Iplad locked up... blue screen (of death?)

Was working with my iPad last night (1st generation) and it locked up... tried re-booting multiple times holding both buttons for 10 seconds... all that happens is apple logo on black screen. This morning, tried again... apple logo stays on screen for 3-4 minues and then blue screen (of death?). iPad is about a year and a half old... any thoughts?

This link might help - http://support.apple.com/kb/ht4097

Similar Messages

Gateway FX and Blue Screen of Death

Computer:
Gateway FX 7024
GeForce 8800GT 512 mb
Problem:
I've had the computer for 1 1/2 years with very few problems. Recently, the screen will lock up solid and be illegible with "static" lines all the way down the monitor. Sometimes before the screen locks up, it will flip to the blue screen of death, say it's dumping physical memory, and then lock up. Only thing I can do is restart, but it will do it again at random lengths of time. Happens more while I'm playing games than anything else. Sounds to me like the graphics card has gone Tango Uniform, but a computer guru, I am not. Any ideas?
What I've done so far:
I have checked for updated drivers and installed them.... no fix. I rolled back the drivers.... no fix. I have visually checked fans on power supply and graphics card to make sure they are working and they are fine. The fan on the motherboard spins, but doesn't appear to be moving overly fast. I checked BIOS and everything looks around what it should be for temp settings. In the "problems and solutions" application, it shows a video hardware error.
The only thing i did notice was there is only a 400W power supply installed and from the posts I've read, the 8800GT graphics card should have a 700-900W power supply. However... I've never had problems with it before. Could this cause the problem after 1 1/2 years?
help... i'm shaking from game withdrawals

Visited a company IT department today and an engineer looked at the AT&T Net Client settings. It now works - this may have been the "fix" for those in a similar predicament (all in the AT&T Net Client):
1. Click "Settings".
2. Click "Show the login properties window".
3. Click "Configure".
4. Click "Next".
5. Select the "Both the internet and my company's intranet" radio button.
6. Select "Managed VPN - SSL DualAccess" from the dropdown.
7. Click "Finish".
Cheers,
- Pete

Blue Screen Of Death in AE

Recently I rebuilt my PC to handle after effects a little better. I am running CS3 on windows XP 64 bit, however once I start working on a project for less than 30 minutes my system locks up and brings up the blue screen of death. It gives me a "Page_Fault_in_Nonpaged_Area" error. I ran several memory tests (all passed) and even messed with the page filing with no luck.
The strange part is that when I switch over to my dual boot (windows vista 32bit), after effects works fine. Just not as fast. I reformatted twice with no prevail. I am really out of options here. If anyone can please offer some help i would really appreciate it. THANKS
Specs
Graphics Card: Radeon HD 3870
Processor: Intel Core 2 Quad Q9450
Ram: 2 X 2GB = 4GB
Motherboard: Gigabyte S-series Ep45-Ds3R

Well, not sure, what actually the error is. If it's a "Could not allocate memory for textures", you could try to increase the RAM usage for OpenGL in AE's preferences (Advanced button on the OpenGL page). However, AE is pretty stubborn in recognizing this, so it may not do anything. For most other errors, you will have to deal with the graphics card driver's settings on a manual basis, meaning you will have to create a custom setup. That is however beyond what this forum can provide, as it would require to know the exact current setup and driver options... What you definitely can do is check the overall video RAM allocation, meaning how much of it is already used in the initial config. This will give you a clue about how much is left for applications. I'd also completely turn off antialiasing. As I remember it, most ATI cards have the bad habit of having it enabled by default. This might also free up resources. The rest is in the dark. There certainly are ways to toy around with the front and back buffers and drawing delays, but as I said - without actually seeing what's going on, this is not going anywhere. And don't worry about your RAM and page file swelling - this is normal behavior and should not touch upon your other issues. Remember: Each and every frame you render, if only for previewing, will be stored in your RAM as long as this is possible. Windows in turn will park more memory pages in the swap file to compensate, hence the simultanous growth of both graphs.
Mylenium

Ipod + itunes = blue screen of death & reboot - HELP PLEASE!

I'll try to make a long story as short as possible here.
i've had a 40G ipod for over a year and a half now. back in the beginning things were working fine. with the size i hadn't done any syncing for a long long time. however, the ipod crapped out so i got a replacement from the apple store.
after registering the new ipod i was having trouble syncing. it would upload a few hundred songs and then freeze or cause a reboot. i uninstalled the ipod software as well, installed the latest itunes software - over the previous version, installed the latest ipod updater software and restored the ipod.
again, i was able to sync for brief periods in 3 different tries - amassing a whole six hundred and something songs. after each try itunes said syncing was complete (but not even close - had just over 2000 mp3s looking to sync up). unbelievably things got worse. now, if the ipod is docked and itunes is running - regardless of which is done first - my pc will get the blue screen of death and reboot itself.
also, without itunes and the ipod docked, it shows up as an i: drive, but when i try to browse it though my computer, it locks up the machine and shows nothing.
any help out there is GREATLY appreciated!
here are my specs:
- ipod 40 Gig, with click wheel and four buttons below the screen with
dock & firewire cable
- pc running windows xp pro
- firewire card with 3 ports
- ipod & itunes software located on 120G c: drive
- mp3 collection located on secondary 160G d: drive
- 3/4 gig of ram
p.s. i have mcafee running and i've tried everything with it on as well as off. doesn't seem to make a difference.
also, i have checked a TON of posts on apple.com as well as other discussion groups and couldn't find an answer.

hi Douglas!
first promise me that you'll back up your data. having your PC shut down in non-standard ways (for
b any
reason) increases your risk of file corruption and putting scruffy spots on your hard drive.
Now some basic first aid. download some fresh definitions and do some vigorous virus and spyware scans. run your favorite hard-disk checking utility. do a disk cleanup.
now let's follow up on the blue screen of death. Perversely, i've started to become pleased when people report BSODs under these circumstances. we can wring a lot of information from a BSOD error message. there's also usually something concrete to go on in the error logs.
(1) what BSOD error number and message are you getting? here's a reference:
http://aumha.org/win5/kbestop.htm
(2) squeeze your error logs for all they're worth. right-click on "My Computer", select manage. click on your event viewer. click on your application and system logs, and look for errors and warnings happening at roughly the same time as your crashes.
click on the relevant warnings to see if you can find any commonalities in the errors/warnings. follow up the Help and Support links to see if you can find any suggested "User action" or relevant MS KB documents. (sometimes these things are there, sometimes they aren't.)
good luck! keep us posted.
love, b

HP PSC 2355 Blue screen of Death and Error message/ blinking lights.

Hello, I have a HP PSC2355 that we recently moved, after we moved it started randomly locking up with the Blue Screen Of Death (BSOD), it would give an error:0X880529ec on the BSOD, further down the screen were the characters 1:H+x?+ The (ON) light was Blinking Green, the (!) light was blinking orange. This will happen regardless if the PC was on or not, it will happen when trying to print, sometimes only getting 1" of print at the top of the page. Currently running Windows XP, SP3 connected via USB. I highly doubt it is a PC issue as it will happen when trying to use it as a standalone copier. Sounds internal to me, I do have electronics experience ( I repair televisions ) If someone has any ideas, let me know.....
I might also add, you dont have to be printing for the error to crop up, you can just plug it in and wait, later you will see the BSOD and the blinking lights.
Message Edited by lesterl on 07-04-2009 06:49 AM

Well, decided to try to print from another computer, d/l the smaller driver only package (26meg), did a fresh install after finally getting the printer to stay on for a few minutes, it took forever on the first part of 8 on the installer (cable already plugged in), and it has been on for many hours now, printed many things, yet to have an error. Dont know if the driver installation did anything with the firmware on the unit or not.
Differences:
Celeron Laptop (virus/trojan free) now
Was on a P4 desktop that had not been so lucky with the trojan/viruses.
Upstairs on my dining room table now
Was in basement in wife's scrapbooking room.
Dunno, time will tell.......

Satellite A105-S4284 gets Blue Screen of Death when coming out of standby

MySatellite A105-S4284 runnings Windows XP gets a BSOD after coming out of standby or hibernation. With standby, I'll see the login screen where I enter my password, and then it may show the desktop background or even the open app (Outlook or Word, typically) for a second, afterwhich the BSOC appears. For weeks I was getting a black screen sporadically after standby. Researched the problem and saw recommendations to update BIOS. So I updated the BIOS to the latest version, and then I started getting blue screens of death rather than a black screen. Thought the problem was McAfee, because I'd get crashes right after McAfee became active in the background, sometimes without going into standby. Cancelled McAfee, took it off with the cleaner, used Avast instead, and that seemed to help. But then BSODs came back. I uninstalled non-essential software, clearned registry with CC Cleaner, freed up more HD space and defragged, ran SpyBot, etc - but I still get the BSOD almost every time I go into standby or hibernate.
The stop messages on the BSOD don't show a driver. and all begin with 0x0000007E (0x000000C5, ... and then differ after that. One recent one followed with 0x804E13D5, 0xAA6B9B8C, 0xAA6B9888). Does that mean anything?
I've installed Microsoft's debugging tools to look at the dumps after a BSOD. Here is output for two recent crashes. Doesn't point to a driver. NTKRMLMP.exe is what crashes - do I need to replace that from the I386 folder somehow? I did have my Matsu**bleep**a DVD-CD drive suddenly quit a time or two until the computer was restarted. Should I reinstall the DVD driver? Or the graphics driver? Worried that I might break something by doing that.
Loading Dump File [C:\WINDOWS\Minidump\Mini030809-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_gdr.080814-1236
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
Debug session time: Sun Mar 8 16:05:07.187 2009 (GMT-5)
System Uptime: 0 days 4:22:53.890
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
BugCheck 1000007E, {c0000005, 804e13d5, a9860b8c, a9860888}
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+7a9 )
Followup: MachineOwner<snip>
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. <SNIP>
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 804e13d5, The address that the exception occurred at
Arg3: a9860b8c, Exception Record Address
Arg4: a9860888, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
FAULTING_IP:
nt!IopfCallDriver+2d
804e13d5 ff548638        call    dword ptr [esi+eax*4+38h]
EXCEPTION_RECORD: a9860b8c -- (.exr 0xffffffffa9860b8c)
ExceptionAddress: 804e13d5 (nt!IopfCallDriver+0x0000002d)
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 00000000
   Parameter[1]: 00000070
Attempt to read from address 00000070
CONTEXT: a9860888 -- (.cxr 0xffffffffa9860888)
eax=0000000e ebx=00000001 ecx=87546020 edx=853fe1a0 esi=00000000 edi=f772471c
eip=804e13d5 esp=a9860c54 ebp=a9860ca0 iopl=0         nv up ei ng nz ac po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010292
nt!IopfCallDriver+0x2d:
804e13d5 ff548638        call    dword ptr [esi+eax*4+38h] ds:0023:00000070=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 2
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
EXCEPTION_PARAMETER1: 00000000
EXCEPTION_PARAMETER2: 00000070
READ_ADDRESS: 00000070
FOLLOWUP_IP:
nt!ExAllocatePoolWithTag+7a9
805517b9 e9e4feffff      jmp     nt!ExAllocatePoolWithTag+0x7bf (805516a2)
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
LAST_CONTROL_TRANSFER: from 804e13d9 to 804e13d5
STACK_TEXT:
a9860c6c 804e13d9 8753d018 853fe1a0 00000000 nt!IopfCallDriver+0x2d
a9860ccc 805517b9 00000000 00000002 00000000 nt!IopfCallDriver+0x31
a9860dac 80575723 a9f4533c 00000000 00000000 nt!ExAllocatePoolWithTag+0x7a9
a9860ddc 804ec6d9 f7720ce2 a9f4533c 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!ExAllocatePoolWithTag+7a9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 48a4044a
STACK_COMMAND: .cxr 0xffffffffa9860888 ; kb
FAILURE_BUCKET_ID: 0x7E_nt!ExAllocatePoolWithTag+7a9
BUCKET_ID: 0x7E_nt!ExAllocatePoolWithTag+7a9
Followup: MachineOwner
0: kd> lmvm nt
start    end        module name
804d7000 806ff000   nt       # (pdb symbols)          c:\symbols\ntkrnlmp.pdb\B883868B88CB415A92EC010CF6A115A52\ntkrnlmp.pdb
    Loaded symbol image file: ntkrnlmp.exe
    Mapped memory image file: c:\symbols\ntkrnlmp.exe\48A4044A228000\ntkrnlmp.exe
    Image path: ntkrnlmp.exe
    Image name: ntkrnlmp.exe
    Timestamp:        Thu Aug 14 05:09:14 2008 (48A4044A)
    CheckSum:         0021B760
    ImageSize:        00228000
    File version:     5.1.2600.5657
    Product version: 5.1.2600.5657
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        1.0 App
    File date:        00000000.00000000
    Translations:     0401.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     ntkrnlmp.exe
    OriginalFilename: ntkrnlmp.exe
    ProductVersion:   5.1.2600.5657
    FileVersion:      5.1.2600.5657 (xpsp_sp3_gdr.080814-1236)

In safe mode it is not possible to standby. That is disabled. Tried to make it possible with Toshiba's power control service, but it is not available.
In a new account, the BSOD still occurs. I created a new account, logged out of my account, and went to the new one. Tried standby. It came out of standby for a second and then had the blue screen of death.
In checking the event manager, I seen errors shortly before crashes sometimes that involve the CD.
So I went to Toshiba.com and downloaded the DVD RAM driver and ran it, reinstalling the driver, and then restarted. I also saw that there was C-Dilla driver in my drivers. I uninstalled the SafeCast program that I think is associated with C-Dilla, moved the C-Dilla driver out of the drivers to a distant folder, unchecked C-Dilla in MSCONFIG so it won't load (it was still there after removing SafeCast), and then reinstarted. So with a new DVD Ram driver and neutering, I hope, of C-Dilla, I tried things again and the system appeared to be crash free - better than it had been. But then a crash occurred - BSOD - and upon restart, the CD locked up, and crashed again.
After restarting, there was a new dialog that popped up after Windows launched indicating that there had been an error with SONIC DLA. Before the crash, there was an event n the event viewer:
My last error comes from the Plug and Play Manager:
The device 'MAT**bleep**A DVD-RAM UJ-841S' (IDE\CdRomMAT**bleep**A_DVD-RAM_UJ-841S________________1.60____\5&226f6cf2&0&0.0.0) disappeared from the system without first being prepared for removal.
Hmmm. So things are still vulnerable. Any ideas? Buy new CD drive? Or new computer?

Blue screen of death when installing Adobe Air

I'm trying to install Adobe Flash CS6 and Adobe Air along with it. About 10 seconds after pressing "install", my computer shows the blue screen of death for a split second, and then restarts.
To my knowledge, I do not have Folder Lock. I also cannot find any windrvNT.sys in the C:\WINDOWS\system32 folder, even after turning on the "show hidden files and folders" option.
Using Windows XP

Raymon_Zheng111 does your computer meet or exceed the system requirements for Flash CS6 listed at http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-flash-professional.h tml#Flash%20Professional%20CS6%20system%20requirements.

Linux Wont Boot Up- Blue Screen Of Death.

I have been trying to boot up linux on my pc with a bottable usb and also from a hard disk it does not matter what linux i try to install whether its Puppy Linux or ubuntu When i boot up in any mode, the screen goes dim for 1 secound then black like the laptop is turned off???
I didnt pay for a locked up frozen hunk of junk! I want it to support other operating systems (OS)
Ive done some google research and what i can find is toshiba basically doesent support linux but could the black screen be releated to something else,others have successfully booted linux with toshiba I got the laptop a few months ago.
And when i tried to boot into windows after trying to get linux to boot after a few hours doing this, I get a blue screen of death for a split secound then the pc turned of, I have now formated the partion to reinstall windows
again, But it seems like the disk has crashed Getting a error message saying "Error TRY: Null or Invaild" Might try to reinstall windows and see what happends (theres not ticking sound and the disk sounds like its processing normally)
Whats the probablem??
Thanks,
Spudster
Laptop Model: L750D Laptop Satelite Series.
PS: Everything was going perfectly fine before i tried ran my bootable linux..
But linux is a handy little system and i do need it as toshiba shouldnt be so locked up hoping to solve these issues anyhow.

Going to bump!

Blue screen of death while installing any Adobe Air application

Whenever I try to install an Air application I get a Blue Screen and then my system restarts.
I cannot even take a screenshot of it.
This happens with every air application I try to install.
I also searched for the same on Adobe forums and found the same problem being faced by someone else.
His problem was resolved by uninstalling a software named "Folder Lock".
I searched my hard disk for this software and found one, so I deleted that software (shift+delete) and removed all it's traces from registry too but that still doesn't solved the problem.
I also tried disabling the antivirus software and then install the air application but this also didn't helped.
I was able to install air applications earlier, but now I can't.
Anybody having same sort of problem. One colleague of mine is also having the same problem.
Please help me out.
My system's config is as follows:
Windows XP Home sp3
Flash Builder 4, with SDK 4.1, 3.5 installed in it.
Adobe Air v 2.5
1.5 GB RAM
1.66 MHz processor
Thanks

Hello chris,
Thank you for taking out your time to solve my problem.
I did all the steps mentioned in that link i.e. installed folder lock and uninstalled it from it's options only.
But it didn't solve my problem.
Here is the screenshot of the Blue Screen Of Death that I was presented while the application was being installed.
The BSOD appeared while the application install progress is shown to the end user.
I hope this will help you get more insight of the issue.
Thanks

How do I Fix Blue Screen Of Death??

My iPhone 4 got the blue screen of death and I can't find a solution please someone help me! I have not droped ever in my life so i dont know what is wrong

Then all I could suggest is:
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Blue Screen of Death Please Help!!!

Hi Everyone. I'm having some major issues with my iPhone 5s (16GB updated to iOS 8.1.1). Literally every time I so much as look at the phone it restarts and gives me the Blue Screen of Death. This happens randomly. At one time it was just a minor annoyance (as it only happen occasionally), but now it is unbearable. My phone is on a constant cycle of Black Screen, Apple Screen, and then Blue Screen.
Before you ask, yes I have reset all of the settings, yes I have tried holding down the home button and the lock button, and yes I have tried wiping my entire phone (in the past) to get rid of this problem.
Please help! Nothing I have done or tried to do is fixing this problem.
Thank you so much in advanced.

If you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.

Iphone 5s problem, blue screen of death

So recently my phone started to show visible vertical lines from the bottom of the screen, blue screen of death, white flickering ring around the edges and it freezes and goes through this loop of rebooting. At first I thought it was a bug so I got the phone to update 8.1 but the problem seemed to have gotten worse from then on. I did a factory reset sso there's no apps or anything on my phone. Does anyone know any at-homes because my AppleCare warranty just espired.

Hi,
1) Background Information
I am advising based on my similar experiences. I have the same problem and coupled with blue, red screens for the past days. And still trying to find a permanent solution to it. But at least i found a way to "wake" my phone up when it goes into "hibernation" mode! This reply is going to be long, my apology in advance.
2) My method to wake the phone up:
* take out the SIM card;
* leave it a side for about 10mins;
* plug the phone to charge;
* hold down the Power button till you see the apple logo, and leave it to re-start.
PS: if you don't see the apple logo, leave the phone again for another 5-10mins and try all the above again.
I hope someone has a better and quicker way to do it.
3) The methods i have tried so far to solve this problem:
a) Phone reset by holding the Home and Power buttons: It didn't work.
b) Tried "Recovery Mode"; to restore to factory settings and then restore iPhone with my latest backup: It didn't work.
c) Now, trying the DFU (Device Firmware Update) mode. I hope this will work for me permanently.
4) Findings from the WEB:
a) Apparently, quite a substantial number of users facing similar problem. (Apple is still observing...no action. )
b) Some suggested that it may due to certain apps affecting this random iPhone re-boot issue or and it has a popular term in the web, "Blue Screen Of Death". Therefore try to remember what was the app you last used before it goes into reboot loop.
c) Some also suggested to remove/deactivate/bypass the auto lock screen function, and also to remove the iCloud syncing,.
Good luck!

Error 13 = Blue Screen of Death?

Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther.
I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load a demo version of Adobe Illustrator CS2.
Over the last day I have tried the following:
* deleted the apple.com.print preferences
* reset the PRAM
* unplugged, unpowered and restarted the printers and their USB connections
* deleted the printers from the print setup utility and tried to reinstall them (but there too I get the 'error 13' message. Printers won't load but they do show up as if they loaded. Just won't work, that's all.
* tried logging in as a new user, and then the printer message is "Not enough RAM" to print.
* repaired the disk permissions from the CD
Generally I've done everything I can think of... except to reload the OS, which I hesitate to do because I have to first load Jaguar, then the Panther update, then the other updates. Last time I tried that things didn't quite work out.
I do have an external backup drive, which also got corrupted as I tried loading the Adobe Illustrator CS2 on that disk too. Dumb I know...
So... anyone know what 'error 13' means?
Is 'error 13' the Mac equivalent of the Windows Blue Screen of Death?
Thanks for any input...

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

Ipod crashes windows (blue screen of death)

Hi all. A bit of background info:
A couple of months ago the hard drive crashed on my friends computer. They had to reinstall their OS. Thankfully they had made backups of most everything and were able to get most things reinstalled successfully.
Now they are using a 15g ipod connected through a firewire port on an HP laptop. They do not have a USB adaptor, so gotta go with the FW.
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
I know this is vague information, but any pointers on how to proceed in troubleshooting this would be greatly appreciated, thanks
Frost

hi Frostine!
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
we can sometimes narrow this down a bit by checking on the numerical and text codes showing up with the blue screen. (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm checking on:
Troubleshooting Windows Stop Messages
can you get that information for us from their PC?
(if the screen is specifying the file that Windows is crashing on, that would be helpful to know too.)
love, b

Windows Vista Crashing When Ipod is Plugged In. Blue Screen of Death?

A week ago, my computer suddenly started to reboot whenever I plugged my 5th generation 80 gig Ipod in to sync. A blue screen will pop up, and automatically restart.
I do not believe this is the blue screen of death that appeared 2 months ago. I have upgraded to Itunes 8.0.1 when it was first released, and I had no problems until a week ago. I haven't heard of anyone receiving the blue screen of death since the update to Itunes 8 was released.
I have also lost all of my music from my Ipod, so I am anxious to figure this out.
Here is what the blue screen (certain passages paraphrased, the specifics were copied directly):
A problem has been detected and windows has shut down to prevent damage to your computer.
BADPOOLHEADER
If this is the firs time you've seen this stop error screen, restart yoru computer. If this screen appears again, follow these steps:
Make sure all hardware and software is properly installed
If it continues, disable/remove any newly installed hardware and software. Disable BIOS memory options such as caching or shawoding. If you need to use safe mode to remove or disable components, restart your computer, press F8 for Advanced Sartup options, then select safe mode.
Technical information:
*STOR: 0x00000019 (0x00000020, 0xB7C4CE50, 0Xb7C4CE68, 0x0A030203)
/end blue screen
Any help you have would be greatly appreciated!

Have you tried the troubleshooting advice in this article?
http://support.apple.com/kb/TS1502
Was a file name mentioned in the stop message? usually something.sys That can be a clue to the problem is the Apple advice doesn't help.

Iplad locked up... blue screen (of death?)

Similar Messages

Maybe you are looking for