IPlanet 4.1 seems to be cutting my pages when working with JRun.

I'm using iPlanet Web Server 4.1 with SP 9. It interacts with JRun running as an application server, and it seems not to be serving complete pages, but cutting them in a randomly manner. Can anybody help me?
I'm working with HP-UX

If you just want to get going quickly, and you are not too worried about counts, ratings etc...
With iTunes closed, drag iTunes Library.itl and iTunes Music Library.xml from your iTunes folder to your desk top. You might want to put them somewhere else that's safe as you may want them back if you successfully upgrade.
Now restart iTunes and you will have an empty library. Use File Add folder to library to add your iTunes Music library to iTunes.

Similar Messages

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • Safari browser seems to slow down when working with my wifi ASUS AC 68U router

    safari browser seems to slow down when working with my wifi ASUS AC 68U router - any ideas on why?

    Is your problem with Safari on the iPad, or some MacBook Air?
    Are you sure that the ASUS firmware is tested with the device having trouble and its operating system?
    Note: MacBook Airs do not run iOS.  They run Mac OS X, Windows or Linux.

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • How can I get my Final Cut Pro 7 to Work with 10.8 Lion?

    I get these two messages and then Final Cut Pro shuts down. Please don't tell me to use FCProX because I don't have time to learn a new system and need to edit a project today. Anyone who has real info on this please help! Thank you SO MUCH! xoxo

    Use Disk Utility to repair the permissions on your system disk.
    Download Preference Manager (free) from Digital Rebellion
    http://www.digitalrebellion.com/prefman/
    to trash your FCP preferences.
    MtD

  • Final Cut Pro 5 not working with JVC BR-HD50/HD-100U

    The footage was shot in 720/30p on the HD-100U which is supposed to work with FCP5. I am using the HD50 deck. I can log the footage but only see black going to the Log & Capture window. I have checked all the settings on the deck and in FCP with no luck. I did get it to capture 853x480 footage that was uncontrollable. FCP does not recognize it on the timeline but does in the viewer. Any suggestions?

    welcome to the forum!
    You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
    This is a good workaround for curing your camera recognition problem:
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Can Final Cut Express 3.5 work with green screen video?

    Forgive my lack of technical terms but I am interested in my next FCE project being a bit more technical with some animations done in front of a green screen. Can FCE "erase" the green so I can overlay it to another background and or movie?
    Cheers,
    iMac G5   Mac OS X (10.4.6)  

    Hi Lori.
    In case you need some more practical advice:-
    FCE has several different filters built in for Green and Blue Screen work.
    FCE can also be used for animation and compositing.
    For all the information you could ever want on the subject click on this link (and all the other links contained therein):-
    http://discussions.apple.com/thread.jspa?threadID=449563&tstart=0
    Ian.

  • Where can I buy? Will it work with Final Cut Express?

    Is it possible to purchase just Motion? And I read everywhere that motion works with final cut pro, will it work with express also?
    Thanks

    http://www.digitalrebellion.com/blog/posts/doesapplication_x_work_with_applicationy.html

  • Final Cut Exp - Working with HDV format & exporting for web in 16:9 format

    I'm working with SONY HVR-A1U prosumer camcorder which captures footage in 1440x1080resolution. My goal is to produce movies fro web in 16:9 size and upload them on "Brightcove" website
    After editing this footage in Final Cut Express I'm trying now to export my movie using "File-Export-Using Quick Time Conversion" option ... and I ran into the big issue with video size settings and how the video gets squezed when uploaded on Brightcove website.
    To get 16:9 size out of FCE, I need to:
    Set the "custom" size 640x360 and set "preserve aspect ration" - use letter box
    Then the resulting movie plays as 16:9 in Quicktime ... however after uploading it on Brightcove it chages the aspect again ... and becomes squashed.
    I would appreciate any advice how to overcome this "squashing" of export when working with HDV footage.
    Thanks
    Peter

    hI(Bonjour)!
    Try this link:
    http://www.kenstone.net/fcphomepage/qt_movies_fromfcp.html
    May be it's a problem with the web interface programation on your upload site?
    Michel Boissonneault

  • Neither JMX nor JNDI seems working with OEP 12.1.3 (regression ?)

    Hi,
    I'm currently writing an OEP application, on the 12.1.3 version.
    My first problem is related to JMX: when OEP is started, I cannot connect in JMX:
    I lanch "OEP_HOME/oep/bin/wlevsjconsole.cmd"
    I use the following URL "service:jmx:msarmi://localhost:9002/jndi/jmxconnector" with user "wlevs" and my pwd
    Impossible to connect...
    My second problem is related to JNDI resource access:
    I add an "data-source" with its "data-source-params/jndi-names/element" in the OEP domain's config.xml file
    I start my OEP (with or without security disbaled, it doesn't change nothing)
    I try to access programmatically the JNDI resource (using the InitialContext lookup method with no prefix, with "java:comp/env/jdbc/", with "java:jdbc/, with "jdbc/") but I always get a NameNotFoundException.
    I try to list programmatically the JNDI resources using the list("") but I get a NoPermissionException.
    I'm not 100% sure, but it seems to me that these things were working with the 11 version of OEP. Could these be regressions ?
    Thx for any help or advice on this.
    RP

    After a reboot of node 2 everything returned to work fine.

  • Final cut pro not working with Yosemite

    I yesterday installed Yosemite and the previous version of Final Cut Pro does not work with it.  When I try to install the latest version of Final Cut Pro from the purchased tab in the app store, I get the message:  "Final Cut can't be installed on this computer because it requires at least 4 GB of memory".  When I go to the storage tab in "About This Mac", it shows that I have 154.49 GB free of 319.21 GB.  Can someone help?  Many thanks. 

    It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo.  I had been using Final Cut Pro without any problems right until I upgraded to Yosemite.  I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating. 

  • Will Final Cut Studio 3 work with OSX Mavericks?

    Hi,
    Does anyone know if Final Cut Studio 3 will work with the New OSX Mavericks when it's released this fall?
    Thanks in advance

    If you have the snow leopard install disk, you can do a custom install and just install rosetta. 
    One person on this forum, says there are serious issues with this workflow and links to another method.
    https://discussions.apple.com/message/22029476#22029476
    I've done it a few times without any issues, and I haven't seen any definitive reports detailing the problems with this. 
    Doing a complete clean install is the much safer way to have a dependable system.  Here's a user tip on OS and FCP installation
    https://discussions.apple.com/docs/DOC-2861
    I'd also recommend creating a bootable clone of your startup drive before doing any os upgrades or application installations or upgrades.  That way if things go south, you can easily return to the previous working system.
    https://discussions.apple.com/docs/DOC-2494

  • Can Final Cut Pro X work with OS X Lion

    I am going to buy a IMac all-in-one which use os x lion and would like to know if Final Cut Pro X will work with it???

    Yes.

  • Have discovered how to split visual and audio tracks. However the cut away only seems to work with still images from iPhoto!

    trying to cut away from one video clip to a second one, while keeping the original sound track, works with still images imported from iPhoto, but cant get the video to drag/drop. please help thanks

    simonjacobson wrote:
    Drag clip over target, green plus sign appears.........clip appears at front of video, no menu option appears,
    OK that sounds correct. Just to clarify, when the sign appears, as you release the mouse button (or whatever you are using), no menu pops up but the clip immediately positions itself:
    at the front of the target clip, OR
    at the very beginning of your project
    Not sure where I'm heading here, just trying to get the complete picture.
    I di it once, but not again, do i need to double click/right click or something?
    No, there is no double-click or right-click involved at all. Just drag and drop, then select from the pop-up menu. You should be able to repeat this with no issues. I've also tested dropping video onto a still picture - the cutaway works on that as well.
    Something is definitely not working correctly - strange! Quit iMovie, then try deleting the preference file as I described in my last post. Quitting and relaunching iMovie might even fix it. Also, try restarting your Mac - that sometimes helps.
    John

Maybe you are looking for

  • What is the correct sequence to link 3 Airport Express units in a WDS?

    I have 3 AE units set up in a WDS. I currently have unit #1 as a main base. Unit #2 is an extended base station. Unit #3 is a remote base station. I have unit #1 connected to the iMac for the internet on the first floor via an ethernet connection. It

  • Cannot find Oracle HTTP Server in 11gR2

    I'm unable to find the Oracle HTTP Server components in the new 11gR2 release for Windows. Where can I find it?

  • Audiobook Download Trouble

    I have converted my audiobook cd to AAC but it still shows as music, how do I get my ipod to recognize it as a book? Do I need to rename it as an m4b? And if so, how do I do that? How do I know that it has been converted? When I converted the first d

  • Itunes 12 Win volume field what is it displaying?

    In Itunes V12 Windows the get info for a song reveals a dialog which has a "File" tab which has a "volume" field what is it displaying? It is not the volume adjustment that is on the Options Tab this volume field in new to V12

  • Convert IPad 2 wifi to 3G?

    We have the IPAD 2 WiFI only -- but want to try to use it in the car as we travel.  Is there a way to add something that would allow it to pick up 3G?