Iplanet 6.0SP4 fails to start with JVM1.4.1

I'm trying to get Iplanet 6.0SP4 to use java 1.4.1. Everytime I try to start the Iplanet instance I get the following in the error log:
[23/Feb/2004:07:52:43] info (21121): successful server startup
[23/Feb/2004:07:52:43] info (21121): iPlanet-WebServer-Enterprise/6.0SP4 B07/17/2002 14:04
[23/Feb/2004:07:52:44] info (21122): Installing a new configuration
[23/Feb/2004:07:52:44] info (21122): [LS ls1] http://webpaged.mtc.bst.bls.com, port 8696 ready to accept requests
[23/Feb/2004:07:52:44] info (21122): A new configuration was successfully installed
[23/Feb/2004:07:52:44] config (21122): There was an error trying to initialize the HPI library.
[23/Feb/2004:07:52:44] config (21122):
[23/Feb/2004:07:52:44] config (21122): Please check your installation, HotSpot does not work correctly
[23/Feb/2004:07:52:44] config (21122):
[23/Feb/2004:07:52:44] config (21122): when installed in the JDK 1.2 Solaris Production Release, or
[23/Feb/2004:07:52:44] config (21122):
[23/Feb/2004:07:52:44] config (21122): with any JDK 1.1.x release.
[23/Feb/2004:07:52:44] config (21122):
[23/Feb/2004:07:52:44] info (21122): Internal error: unable to create JVM
[23/Feb/2004:07:52:44] failure (21122): Failure to load JVM (check your JRE)
[23/Feb/2004:07:52:44] failure (21122): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
The system is Solaris 8 and the Java is 1.4.1_05-b01.
I have editted the start-jvm to point to the 1.4.1 JVM and added the StackSize 1024000 to the magnus.conf but I still get the same error. If I change back to JVM1.3.1 the server starts fine.
Any help or suggestions would be appreciated.
Ed

I just ran into the same set of error messages running iPlanet 6 and j2sdk_1.4.1_03. While I cannot pinpoint the cause of the problem, a reinstall of the SAME version of Java has eradicated it. There might be a difference in the patches that were applied.

Similar Messages

Sync session failed to start with itunes and iphone 5

sync session failed to start with itunes and iphone 5

Restart your computer
While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
After you are done doing that, restart your phone.
Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

HT1386 Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

HT1386 why the sync session failed to start with my iphone

Why the sync session failed to start with my iphone

i did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!

Adalnctl failed to start with status 127

OS:red hat as4
ebs: 11.5.9
now my system can be started,but the adalnctl failed to start with status 127.
the error message is about lsnrctl which saied that lsnrctl: command not found.
but when i start the lsnrctl with oracle owner,the lsnrctl was started immediately.
however,i found that,the lsnrctl was conected to the port 1521,the adalnctl to the port 1626.
please help me to see it!
the cdalnctl log was this:
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=ebstest)(Port=1626))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Starting listener process APPS_PROD.
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting /u01/oradata/prodora/8.0.6/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
adalnctl.sh: exiting with status 1
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1
./adalnctl.sh: line 126: lsnrctl: command not found
Starting listener process APPS_PROD.
./adalnctl.sh: line 137: lsnrctl: command not found
adalnctl.sh: exiting with status 127
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1

oh maybe i found it
i have more than one listener.ora
[root@ebstest /]# find -name listener.ora
./u01/oradata/prodora/iAS/hs/admin/listener.ora
./u01/oradata/prodora/iAS/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/samples/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010106/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010108/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010121/listener.ora
and the other listener.ora was about port 1626
[root@ebstest /]# cat ./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
# $Header: admk80ln_ux.sql 115.13 2003/04/03 08:05:06 skghosh noship $
# LISTENER.ORA For Oracle Applications
# This file is automatically generated
APPS_PROD =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= ebstest)(Port= 1626))
SID_LIST_APPS_PROD =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM_PROD )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDSM )
( envs='MYAPPSORA=/u01/oradata/prodappl/APPSPROD_ebstest.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/u01/oradata/prodcomn/admin/scripts/PROD_ebstest/gsmstart.sh' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDFS )
( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1,LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,SHLIB_PATH=/usr/lib:/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,LIBPATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,APPLFSTT=PROD,APPLFSWD=/u01/oradata/prodappl/admin' )
STARTUP_WAIT_TIME_APPS_PROD = 0
CONNECT_TIMEOUT_APPS_PROD = 10
TRACE_LEVEL_APPS_PROD = OFF
LOG_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
LOG_FILE_APPS_PROD = APPS_PROD
TRACE_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
TRACE_FILE_APPS_PROD = APPS_PROD

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035

Windows Server 2008 R2 Standard.
I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.
Sourece: Kernel-EventTracing
EventID: 2
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
- System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID 2
Version 0
Level 2
Task 2
Opcode 12
Keywords 0x8000000000000010
- TimeCreated
[ SystemTime] 2010-12-01T11:17:19.937490400Z
EventRecordID 17
Correlation
- Execution
[ ProcessID] 3472
[ ThreadID] 3100
Channel Microsoft-Windows-Kernel-EventTracing/Admin
Computer LODGER.aqa.com.ru
- Security
[ UserID] S-1-5-21-1644491937-706699826-1417001333-3605
- EventData
SessionName WbadminUIInBuiltTracing
FileName
ErrorCode 3221225525
LoggingMode 2
What causes the error? What do I need to do to avoid it?

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          24/12/2009 09:08:20
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
    <EventRecordID>36</EventRecordID>
    <Correlation />
    <Execution ProcessID="1944" ThreadID="1948" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>George-XXL</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">
    </Data>
    <Data Name="FileName">
    </Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>

Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong!

DRM Process Manager failed to start with error Timeout starting the following process: NetJNIBridge.

When we Start the DRM DRM Process Manager failed to start with following error
[Process ID: 3948, Thread ID: 1, Process Manager]
Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
After 11.1.2.3 DRM upgrade

OS:linux
i am getting error in installing OPMN manually
when trying to installing OPMN manually getting error i.e,
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed
when checked opmn/logs:
opmn.log is empty
ons.log showing error ie:
13/06/17 19:22:45 [4] ONS server initiated
13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
ipm.log shoeing error i.e:
13/06/18 11:58:04 [4] OPMN server ready. Request handling enabled.
13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
any idea why it is showing error??

Visual Composer on SAP CE 7.1 fails to start with missing manifest file

Hi All,
I have installed a SAP NetWeaver Composition Environment 7.1 and deployed the configuration template for the complete stack. I wanted to access the VC on the following URL
   http://myhost:501000/VC
The login page appears and I enter a user with all needed privileges (Administrator) then the VC bails out with a popup message stating:
   Failed to open workspace due to the following error:
   Kits manifest is bad or missing
In the log directory of the cluster I found the following lines right before the first java exception that led to the VC failing to start.
    #000C29361F67001A00000002000005F801F890B616AD3BB1#1192131467531#com.sap.lcr.pers.jdbc.common.common.AbstractCRJdbcPersistence#sap.com/com.sap.lcr#com.sap.lcr.pers.jdbc.common.common.AbstractCRJdbcPersistence#Administrator#11#SAP J2EE Engine JTA Transaction : [0ffffffd8ffffffb5ffffff8a003ffffff83]###67b81480783111dcbfe7000c29361f67#Application [13]##0#0#Error##Plain###Thrown:
com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: The SQL statement "SELECT "APPL","NA_HASH","NA_KEY","TYP","ACTIVE","RANK","CL_START_ID","HOSTNAME","NAMESPACE" FROM "BC_SLD_NAMESP" WHERE "APPL" = ? AND "TYP" = ?" contains the semantics error[s]: - 1:116 - the table or view >>BC_SLD_NAMESP<< does not exist
Can anyone tell me on how to get that VC up and running? Did I forget something to deploy or did I miss a configuration step?
Any hint highly appreciated,
    Christian

I'm getting the same error and the freestyle.jsp does not help either.
By the way, the error posted above is related to the SLD, which is not installed with CE 7.1. I don't think that has anything to do with VC... Please correct me if I'm wrong.
Message was edited by:
        Pascal Willemsen

Server failed to start with Exception (XACMLAuthorizerInit.ldift)

I am using WebLogic 11gR1 Deployed HP systinet domain and when i tried to start server it failed to stat with below exception
<Error> <Security> <BEA-090870> <The realm "myrea
lm" failed to be loaded: weblogic.security.service.SecurityServiceException: com
.bea.common.engine.ServiceInitializationException: weblogic.security.spi.Provide
rInitializationException: A failure occurred attempting to load LDIF for provide
r Authorizer from file C:\WebLogic\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldi
ft..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.Servic
eInitializationException: weblogic.security.spi.ProviderInitializationException:
A failure occurred attempting to load LDIF for provider Authorizer from file C:
\WebLogic\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.lo
adRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
Truncated. see log file for complete stacktrace
Caused By: com.bea.common.engine.ServiceInitializationException: weblogic.securi
ty.spi.ProviderInitializationException: A failure occurred attempting to load LD
IF for provider Authorizer from file C:\WebLogic\WLSERV~1.3\server\lib\XACMLAuth
orizerInit.ldift.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(S
erviceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(S
erviceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(Servic
eEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.j
ava:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(CSSWLSDelegat
eImpl.java:155)
Truncated. see log file for complete stacktrace
Caused By: weblogic.security.spi.ProviderInitializationException: A failure occu
rred attempting to load LDIF for provider Authorizer from file C:\WebLogic\WLSER
V~1.3\server\lib\XACMLAuthorizerInit.ldift.
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadFull
LDIFTemplate(BootStrapServiceImpl.java:910)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
Template(BootStrapServiceImpl.java:688)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
XACMLAuthorizerTemplate(BootStrapServiceImpl.java:176)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
XACMLAuthorizerTemplate(BootStrapServiceImpl.java:160)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDI
FXACMLAuthorizerTemplate(BootStrapServiceImpl.java:106)
Truncated. see log file for complete stacktrace
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:965591 fatal store error> kodo.jdo.Fa
talDataStoreException: The transaction has been rolled back. See the nested exc
eptions for details on the errors that occurred.
at org.apache.openjpa.kernel.BrokerImpl.newFlushException(BrokerImpl.jav
a:2170)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2017)
at org.apache.openjpa.kernel.BrokerImpl.flushSafe(BrokerImpl.java:1915)
at org.apache.openjpa.kernel.BrokerImpl.beforeCompletion(BrokerImpl.java
:1833)
at org.apache.openjpa.kernel.LocalManagedRuntime.commit(LocalManagedRunt
ime.java:81)
Truncated. see log file for complete stacktrace
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:965591 nonfatal store error> kodo.jdo
.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 23848942 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS,
WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params
=(String) systinet_domain, (String) myrealm, (String) Policies, (String) urn:bea
:xacml:2.0:entitlement:resource:type@E@Fmbean@G, (String) 1.0, (null) null, (nul
l) null, (null) null, (Blob) oracle.sql.BLOB@1ba5016, (InputStream) java.io.Byte
ArrayInputStream@dfd643, (String) 3, (Timestamp) 2012-01-25 12:29:41.209] [reuse
d=0]} [code=942, state=42000]
FailedObject: [email protected]5
at org.apache.openjpa.jdbc.sql.DBDictionary.narrow(DBDictionary.java:420
7)
at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictiona
ry.java:4171)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java
:102)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java
:72)
at kodo.jdbc.kernel.BatchingPreparedStatementManager.flushInternal(Batch
ingPreparedStatementManager.java:214)
Truncated. see log file for complete stacktrace
Caused By: org.apache.openjpa.lib.jdbc.ReportingSQLException: ORA-00942: table o
r view does not exist
{prepstmnt 23848942 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS,
WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params
=(String) systinet_domain, (String) myrealm, (String) Policies, (String) urn:bea
:xacml:2.0:entitlement:resource:type@E@Fmbean@G, (String) 1.0, (null) null, (nul
l) null, (null) null, (Blob) oracle.sql.BLOB@1ba5016, (InputStream) java.io.Byte
ArrayInputStream@dfd643, (String) 3, (Timestamp) 2012-01-25 12:29:41.209] [reuse
d=0]} [code=942, state=42000]
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingCo
nnectionDecorator.java:192)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.access$700(Log
gingConnectionDecorator.java:57)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator$LoggingConnect
ion$LoggingPreparedStatement.executeUpdate(LoggingConnectionDecorator.java:866)
at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeUpdate
(DelegatingPreparedStatement.java:269)
at org.apache.openjpa.jdbc.kernel.JDBCStoreManager$CancelPreparedStateme
nt.executeUpdate(JDBCStoreManager.java:1421)
Truncated. see log file for complete stacktrace
>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <Security> <BEA-090082> <Security initia
lizing using security realm myrealm.>
<Jan 25, 2012 12:29:45 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server
failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Secu
rity Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to FAILED>
<Jan 25, 2012 12:29:45 PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to FORCE_SHUTTING_DOWN>
Any help appreciated
Raj

I am using WebLogic 11gR1 Deployed HP systinet domain and when i tried to start server it failed to stat with below exception
<Error> <Security> <BEA-090870> <The realm "myrea
lm" failed to be loaded: weblogic.security.service.SecurityServiceException: com
.bea.common.engine.ServiceInitializationException: weblogic.security.spi.Provide
rInitializationException: A failure occurred attempting to load LDIF for provide
r Authorizer from file C:\WebLogic\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldi
ft..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.Servic
eInitializationException: weblogic.security.spi.ProviderInitializationException:
A failure occurred attempting to load LDIF for provider Authorizer from file C:
\WebLogic\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.lo
adRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
Truncated. see log file for complete stacktrace
Caused By: com.bea.common.engine.ServiceInitializationException: weblogic.securi
ty.spi.ProviderInitializationException: A failure occurred attempting to load LD
IF for provider Authorizer from file C:\WebLogic\WLSERV~1.3\server\lib\XACMLAuth
orizerInit.ldift.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(S
erviceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(S
erviceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(Servic
eEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.j
ava:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(CSSWLSDelegat
eImpl.java:155)
Truncated. see log file for complete stacktrace
Caused By: weblogic.security.spi.ProviderInitializationException: A failure occu
rred attempting to load LDIF for provider Authorizer from file C:\WebLogic\WLSER
V~1.3\server\lib\XACMLAuthorizerInit.ldift.
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadFull
LDIFTemplate(BootStrapServiceImpl.java:910)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
Template(BootStrapServiceImpl.java:688)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
XACMLAuthorizerTemplate(BootStrapServiceImpl.java:176)
at com.bea.common.store.bootstrap.internal.BootStrapServiceImpl.loadLDIF
XACMLAuthorizerTemplate(BootStrapServiceImpl.java:160)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDI
FXACMLAuthorizerTemplate(BootStrapServiceImpl.java:106)
Truncated. see log file for complete stacktrace
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:965591 fatal store error> kodo.jdo.Fa
talDataStoreException: The transaction has been rolled back. See the nested exc
eptions for details on the errors that occurred.
at org.apache.openjpa.kernel.BrokerImpl.newFlushException(BrokerImpl.jav
a:2170)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2017)
at org.apache.openjpa.kernel.BrokerImpl.flushSafe(BrokerImpl.java:1915)
at org.apache.openjpa.kernel.BrokerImpl.beforeCompletion(BrokerImpl.java
:1833)
at org.apache.openjpa.kernel.LocalManagedRuntime.commit(LocalManagedRunt
ime.java:81)
Truncated. see log file for complete stacktrace
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:965591 nonfatal store error> kodo.jdo
.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 23848942 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS,
WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params
=(String) systinet_domain, (String) myrealm, (String) Policies, (String) urn:bea
:xacml:2.0:entitlement:resource:type@E@Fmbean@G, (String) 1.0, (null) null, (nul
l) null, (null) null, (Blob) oracle.sql.BLOB@1ba5016, (InputStream) java.io.Byte
ArrayInputStream@dfd643, (String) 3, (Timestamp) 2012-01-25 12:29:41.209] [reuse
d=0]} [code=942, state=42000]
FailedObject: [email protected]5
at org.apache.openjpa.jdbc.sql.DBDictionary.narrow(DBDictionary.java:420
7)
at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictiona
ry.java:4171)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java
:102)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java
:72)
at kodo.jdbc.kernel.BatchingPreparedStatementManager.flushInternal(Batch
ingPreparedStatementManager.java:214)
Truncated. see log file for complete stacktrace
Caused By: org.apache.openjpa.lib.jdbc.ReportingSQLException: ORA-00942: table o
r view does not exist
{prepstmnt 23848942 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS,
WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params
=(String) systinet_domain, (String) myrealm, (String) Policies, (String) urn:bea
:xacml:2.0:entitlement:resource:type@E@Fmbean@G, (String) 1.0, (null) null, (nul
l) null, (null) null, (Blob) oracle.sql.BLOB@1ba5016, (InputStream) java.io.Byte
ArrayInputStream@dfd643, (String) 3, (Timestamp) 2012-01-25 12:29:41.209] [reuse
d=0]} [code=942, state=42000]
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingCo
nnectionDecorator.java:192)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.access$700(Log
gingConnectionDecorator.java:57)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator$LoggingConnect
ion$LoggingPreparedStatement.executeUpdate(LoggingConnectionDecorator.java:866)
at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeUpdate
(DelegatingPreparedStatement.java:269)
at org.apache.openjpa.jdbc.kernel.JDBCStoreManager$CancelPreparedStateme
nt.executeUpdate(JDBCStoreManager.java:1421)
Truncated. see log file for complete stacktrace
>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <Security> <BEA-090082> <Security initia
lizing using security realm myrealm.>
<Jan 25, 2012 12:29:45 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server
failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Secu
rity Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to FAILED>
<Jan 25, 2012 12:29:45 PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<Jan 25, 2012 12:29:45 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to FORCE_SHUTTING_DOWN>
Any help appreciated
Raj

Iplanet 6.0SP4 fails to start with JVM1.4.1

Similar Messages

Maybe you are looking for