IPlanet 6.1-SP6 auto re-starting with Child admin thread shutting down
We are running the same application everywhere without any issues. Just migrated to new machine/environment and whenever the client (browser) tries to acess a JSP, the web-server automatically re-starts itself with message Child admin thread is shutting down.
We are using Solaris OS 9, with Sun Cluster 3.1, JDK both 1.3.1_04 and 1.4.2_06.
Any help will be highly appreciated.
Issue is resolved, there was an issue with classpath settings in jvm12.conf
Similar Messages
-
[W520] Does not start on battery only, doesnt shut down or sleep
Hi all,
I have quite a huge problem after flooding my W520 with tea. Obviously immediately after spilling it I flipped the machine, unplugged ac, took out the battery. Few days after laptop didnt start so I had it serviced. The keyboard was changed and whole interior was cleaned. At home I tried to power on the laptop (with battery only) but with no reaction, then plugged ac and computer started itself (I didnt press the power button). When it starts it is possible to unplug the ac, and it works on battery.
Second problem is that the machine doesnt want to powerr off or sleep. It shuts down for 2-3 second then automatically starts (both on ac and when already started with battery). To shut down I have to take out the battery and ac. (Tried all possible stuff, WOL, Always on mode and so on but nothing works) ;/
Called the service with explanation but nobody seemed to know how to fix it. If you have any ideas that could solve the problem please help...Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you spilled tea in your Lenovo ThinkPad W520 and you are facing multiple issues with the system.
I would suggest you to perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect the AC Adapter and battery and try to turn ON the computer.
I would suggest you to update BIOS to the latest version, try swapping with a good known AC adapter and battery.
Basically there's 3 power sources for the motherboard ac adapter, laptop battery and CMOS battery. If either of them goes bad or is malfunctioning you might experience strange behavior. If you have confirmed the functionality of the above said, it probably points to a system board failure.
Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?
What "everything" have you tried?
What exact version number (down to the last decimal) is your AE?
What OS are you using?
What are your other system specs?
When did it work last? What happened between then and now?
FAQ: What information should I provide? -
Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly! -
Trouble with Safari - it keeps shutting down - all because I tried to get rid of MacKeeper
trouble with Safari - it keeps shutting down - all because I tried to get rid of MacKeeper ad - after I install what I thought was an update since I already had MacKeeper, it would not allow me to continue without buying the new one. Make a long story short I switch to Firefox and deleted as much as I could of Safari (files, preferences etc) Now I'm at OS Yosemite X 10.10.2 and would like to get Safari up and running again - I've searched for Adware in applications etc but could not find it. Found what to do from the community, but before I go that route...Do I have to know where or if I actually have this spyware? And if I were to reinstall Maveric - would my files and such be undisturbed? so that only Safari would be replaced? I"M LOST .... (as if you couldn't tell)
I've been working with Mac for 30 years or more and although I'm hands on taught the only thing I lack is the newer "buzz words" so if you can help me out - please make it simple ?? thanksThere is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
When i plugin my iPhone 4s to the mac, pc o wall, it starts charging, but then it shuts down
When i plugin my iPhone 4s to the mac, pc o wall, it starts charging, but then it shuts down.
I tried restoring, reseting, putting in DFU mode, everything.
But it keeps doing the same thing, sometimes it shuts down exactly when i plug it in.
A friend told me it may be something electric with the connector.
Im from Argentina, but my aut is travelling to the US this friday, can she take it to the Apple Store and find a solution ???Hi,
If you are able to sign in at https://supportprofile.apple.com/ with the Apple ID that you did use to register your iPhone, you shall be able to access the information regarding your device and its own warranty.
If your iPhone is not yet registered, you can register it by entering its serial number on your profile.
Then, you shall also be able to automatically contact Apple and report the problem. They might even send you another iPhone by mail and provide you with an empty box to return the problematic one.
Hope this help.
P- -
Satellite E45t won't start for few hours after shut down
I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble.
Please help.Hello,
I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly" and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle.
This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2. I also have disabled rapid start, etc after the problem began.
I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
Thanks!! -
On start up, says had problem shutting down mac book pro mavericks
on start up, said had problem shutting down, mac book pro mavericks 10.9.4
recently loaded dragon dictateWelcome to Apple Discussions!
I am wondering if your hard drive is failing? You might try downloading and running SMART Utility on it:
http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
You can download the demo and run it several times for free. It is somewhat more critical than Disk Utility, and may give you earlier warning of impending drive failure.
You might also want to run the extended version of the Apple Hardware test and see if you get any error codes.
From the way your hard drive is behaving, it sounds to me like there is something wrong with it. Since reinstalling the OS doesn't solve anything, you are likely dealing with some sort of a hardware issue.
Good luck! -
Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reboot before I can use it. This makes turning on Apple TV a very long process. Any suggestions?
That would be very hard to do, as I would have to do a lot of things--including moving furniture to get at the back of a receiver--and I'm not at all sure that the receive could accommodate it.
The process is like this: I dial the receiver to the Apple TV input. The light comes on, like it's connecting, but then the Apple TV goes dark before any connection happens. Then I unplug the power cord, wait a few moments, and plug it back in. Then the Apple TV actually connects, but only after a full reboot (setting time, etc). -
USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?
OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.
-
On starting up, my macbook pro shuts down after 25 seconds of booting up.
Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .
Hello Wilson@w,
The article linked below details the process of placing your device in recovery mode in order to complete the update.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??
Start by doing an SMC reset http://support.apple.com/kb/HT3964 and see if that resolves it.
-
Safari preferences don't work and opens with tabs that were shut down
safari preferences don't work and opens with tabs that were shut down. what to do?
Quit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Launch Safari
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box beside "Remove stored name and passwords"
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Delete safari .plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.Safari.plist
Right click it and select "Move to Trash".
Restart. -
Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?
can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Maybe you are looking for
-
QuickTime doesn't open up! Please Help!
i recently upgraded to lion, and accidently deleted quick time. I used the snow leopard disk to restore it, but now it doesn't work. Evey time I open it up i get this massage: QuickTime Player cannot be opened because of a problem. Check with the dev
-
Can I open Logic 9 projects in earlier versions of Logic?
I will be using a Logic Express project between two Macs. One Mac will have Logic 9, and one with Logic 8. Will the same project be able work between the two versions without any hassle? Thanks!
-
ME_PROCESS_REQ_CUST~INITIALIZE
Hello Gurus, How should I use this (INITIALIZE) method? Can this method not be used to initialize the PReq screens with default values? My requirement is that when the user calls the ME53N transaction to create a PReq, should see some field values (l
-
Upgrade path - DP4 to MC4 - seriously pi$$ed off
So this does not make any sense at all. I bought Design Premium 4 for the full amout of $1799 back in November. I have a very small company, but want to do the ethical thing when it comes to software. Now it turns out that I need to do a bit of video
-
Hi All, I need to create variable for fiscal year/period but in my data source don't have fiscal period field. my data source is 2lis_04_p_arbpl. So please could anyone tell me how to solve this issue it's urjent. Thanks & Regards, Rajesh.