Iplanet 6 sp5 templatized installation
I'm trying the templatized installation onto 3 servers and am getting the error "./installWrapper: not found"
I've setup my Master server's .rhosts & hosts.equiv as needed
I've setup my targets with .rhosts & hosts.equiv
Iplanet 6 is installed at /opt/SunOne/server6.
The setup files are located at /opt/SunOne/setup
I've created the symbolic link as
ln -s /opt/SunOne/server6/ /opt/SunOne/setup/
I've modified the template.inf file to reflect my target servers and it's installation requirements.
Now, when attempting to run the installWrapper application from the command line ./installWrapper -f template.inf I get "./installWrapper: not found"
If I type "perl installWrapper -f template.inf I get the start of the installation asking to make sure I've added the hosts to .rhosts, it then errors our at
sh: /opt/SunOne/setup/setup "can't find setup"
Hope somebody can help.
THanks
Daniel Mulrooney
I do not think that my previous code worked by pure
luck because we have been using the code since
Netscape 3.5 and 4.X webserver days! Has anything
changed here?It was luck. Prior to Netscape Enterprise Server 3.0, sn->client->ht[0] did not contain the "ip" pb_param (i.e. your code would not have worked on versions prior to 3.0). The arrangement of values within the sn->client->ht[] array was changed in 3.0 to support the new ACL API, and, as a result, sn->client->ht[0] happened to contain the "ip" pb_param. This wasn't by design; "ip" just ended up there by chance.
The arrangement of values within the sn->client->ht[] array used in 3.0 remained unchanged until 6.0 SP5 when it was changed for performance reasons.
Even in 3.0 through 6.0 SP4, code that expects to find "ip" in sn->client->ht[0] could break when used in conjunction with other NSAPI plugins.
Also, the fix should work for previous versions (4.x
and 3.5?) of the webserver as well, right?That's correct. pblock_findval() is a documented and supported interface.
Similar Messages
-
Error , while running the Template Installer
Hi Experts,
I am getting the following error when running the Template Installer in NWA.
When i trying to save the domain information in CMS , i am getting the following error.
Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error.
I have seen following solution in the forums.
In the SLD->Technical Landscape-> Technical System Type, select "System Landscape Directory" ensure that the SLD server you use has the 'Name Server' check box selected and right CIM Server URL is mentioned.
But i haven't find this navigation for (Technical Landscape)in my SLD again in that choosing the"System Landscape Directory" . Please let me know the correct path to fix this problem.
I have logged in to sld
http://<server>:<port>/sld
Under the "Home" -> Link having Landscape -> Technical System and Landscapes.
I have tried in both (Technical Systems and Landscapes)the places , i have nt find the "System Landscape Directory". to see the "Name Server" check box to select.
Please give the right path to select the respective check box
Please give the solution . It is urgent.
Regards
VijayHi
When you use the template installer, the users
NWDI Administration User
NWDI CMS Administration User
NWDI Development User
are automatically created and they are required. Also the steps to allocate the users to groups are automatically performed
Check the following help doc for more info
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/60dc1943c2311ce10000000a155369/frameset.htm
Perhaps you might try creating the groups manually as described
Regards
krishna -
Problem running BI template installer after upgrade to 2004s
Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
BoazHi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland -
BI - Portal Template Installer Issue
Hi all,
Guess it's appropriate forum for this question regarding BI to portal connectivity. I've tried Template Installer from SAP Note 983156 but in it's first step "create RFC destination in abap" fails with following error message:
1 Create Destination in ABAP Import not successful
Element'SAPConfigLib.BIW.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BIW.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
There are few threads on this issue but fail to resolve the issue here. If some came across this issue I'll be pleased if a solution can be shared here.
Regards.Issue resolved,
Template installer runs on specific SP levels on BI.
Check SAP notes for this.
Rgds. -
NWA -->deploy and change, Template Installer
scenario: BI-Java
1,create RFC destinations IN ABAP
error msg:
Create Destination in ABAP Import not successful Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERRORHi Shen,
Could you please share the solution. I tried all SAP notes I found with one listed in this thread, but to no avail.
I also faced error in step 12 in addition to 1.
Create Destination in ABAP
Import not successful
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERROR
Import ABAP Certificate to Engine
Import not successful
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':Error during executing Java Reflection:Remote call errored
regards, Sean. -
Bi7.0 to portal integration using template installer
hi frnds,
i change my connectivity step to bi to ep 7.0
now i m using template installer for full bi installation
all the step are successfully completd.
when i am cheking with java based
Note 937697 - Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
http://XX:50000/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
it gives me three error like
1.Validity (Fri Jul 25 08:00:00 IST 2008/Sat Jul 25 08:00:00 IST 2020) of J2EE certificate SAPLogonTicketKeypair-cert is different to validity (Fri Jul 25 02:30:00 IST 2008/Sat Jul 25 02:30:00 IST 2020)of imported J2EE certificate in ABAP system
2.Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'ABI_BSE_EPT'
3.Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'ABI_BSE_EPT'
can any1 help me??
regards
vipul a kapadiahi bro,
i solve that problme
1.Goto TCODE u2018STZACu2019 and set the System Time Zone and Useru2019s Default Time Zone to india(whatever u want)
2. give the permission to portal folder's.u can find PDF for that using search string "How to configure permission for portal" in google.
give all the permission as PDF says.
give rewards points
regards
vipul kapadia. -
Hi Guru:
When I run the template installer in the portal, I got the following errors in the step 1, "create RFC destination in ABAP"
Element 'SAPConfigLib.PT1.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.PT1.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
How to deal with it?
Thank you.
Best regards,
EricHi Eric,
I had a similar error with the template installer. Oss note 917950 is definitely the place to start. Make sure you have sso defined on abap system by maintaining profile parameters:
login/accept_sso2_ticket=1
login/create_sso2_ticket=2
Restart sap and rerun template installer.
Regards
Stefan -
Template installer (plug-in missing) .. Plz urgent
Dear All,
I the browser when I navigate in "SAP NetWeaver Administrator" -> "Deploy and Change" -> Template Installer, I get the error message "Cannot start plug-in".
I am using Netweaver2004s with sps15.
Regards
FarooqYes, it does appear that I am building with a "Debug" profile. I started my plugin from one of the sample projects and, as covered elsewhere in the forum, the sample projects do not include "Release" profiles. Will you give me some hints or point me to some informaiton on how to create a release profile for my plugin?
Thanks!
Steve -
Template Installer ... this will drive me insane soon
Hi there
I am still having trouble getting the flipping template installer to run.
We have now updated to SP11, so I can't believe it is a patch level thing.
If I try to run the installer now, I get an error on step 8, which says
Character not allowed: ':' in 'pcd:portal_content' [Root exception is javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:portal_content'
I don't know where it is getting the ":" from, or where it wants to put it, so fixing the error is extremely frustrating.
Please, someone out there tell me you have a solution.
Cheers,
AndrewHi Sindri
Sorry ... I was the same as you, SP11 and NW2004s, but still no joy with the Template Installer. I resorted to running the template installer a few times, got the errors, then went through the steps in SPRO manually.
The outstanding steps in SPRO weren't terribly difficult to do, and it was soon all up and running.
Would have been nice if SAP could have provided software that worked though.
Good luck
Andrew -
Hi,
I want to use the template installer to configurate the sld.
With which user can I logon the NetWeaver Administrator?
Thanks.
Regards
StefanIf you do not have an Admin role already, use J2EE_ADMIN.
We have had issues with running the template installer and had to use OSS Note 764176 to resolve the issues.
See also 939892. -
Template Installer SLD Local only
I have installed EP and have not configured SLD. I went to the NWA url and noticed a meesage stating Local SLD can only be configured (or something like that).
Can I run the template installer for NWA Configure SLD to point to the central SLD? If not what do I have to do to point to a central SLD.
Thanks
MikieHi,
See this
Note 939592 - PI Usage Configuration versus Central SLD
You can run Template installer for NWA to configure SLD to point Central SLD, but there are constraints.
923359 - Collective Note: Template Installer (CTC)
Br,
Amit Lal
Reward pts if suitable answer. -
Hi all,
I am getting the following error while i tried to do NWA configuration through template installer
1 Configuring and starting SLD Data Supplier Bridge Import not successful Element 'SAPConfigLib.DP1.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!java.lang.ArrayIndexOutOfBoundsException: 6:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!153-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
thanks
regardshttp://help.sap.com/saphelp_nw04/helpdata/en/43/783dc1eabd1ad0e10000000a114cbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/783dc1eabd1ad0e10000000a114cbd/frameset.htm
Configuration problems with NWA (NW04, SPS17)
reward points if helpful -
Hi
We have installed a dual stack SR2 system and patched to SPS15. When we run the DI template installer, it gives an error "Message with name [DIMasterPwdPolicyCheckMsg] does not exist [concat('. ',/getPasswordPolicyErrorTextOutput/Return/text()) ]"
We have seen the note 1145663 and so did all group creation and assignment manually and skipped these steps.
However when we get to Upload Default ACLS this step fails with unauthorized and trying to manually assign the ACLs listed in on SAP Help is very unclear. The document says there should be a View Permissions in the context menu however I don't see any of this. I have checked in the DTR Perspective in Developer Studio and tried to look in the /dtr URL.
Has anybody has this problem and how have they resolved it.
Thanks
Leigh White
SAP Technical ConsultantHi
Thanks Pascal - activated the DTR Admin plugin and was able to update ACL permissions.
For information - reply from SAP is that Template Installer is buggy with a dual stack install. We were on SPS15 which is the latest. All configuation therefore has to be done manually.
SAP were working on a fix for this.
thanks for the assistance -
Template Installer for nwdi.
Hi,
I installed NWDI and in the documentaion I read about executing the DI template Installer as a pre-requisite.
I have never done this before and I checked the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
Is it necessary to do run this? For NWDI for ESS/MSS web dynpro customization, what scenario should I select?
can anyone please explain more about the template installer.
thanks
regards
smHi,
DI template Installer:
NetWeaver 2004s Usage Type DI (NWDI) Installation
template installer
http://help.sap.com/saphelp_nw04s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
ESS/MSS web dynpro customization
Customizing ESS Business Package using Web Dynpro
Regards,
Senthil K. -
Template Installer for BI and EP integration
Dear Friends,
I am trying to Configure my BI 7 system to EP.
and according to SAP Note - 917950 template installer is standard procedure
to configure it.
i access this tool through http://<host>:<port>/nwa.
when i run the template after entering required values in given fields.
i got error message on step one.
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
Any help highly Appricated,
Regards,
MalikHi Malik,
Did you create RFC destinations properly....
here is the document...
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
the same problem what you are facing is.. http://sap.ittoolbox.com/groups/technical-functional/sap-basis/error-in-bi-post-install-2053496
regards,
Pradeep
Maybe you are looking for
-
Hi there, can my daughter's ipod be located if her device shares my account (I am connected to icloud) but her ipod is not connected to the icloud??
-
Can anyone help me decipher if I have a Keylogger in my Terminal description?
Hello there - I followed some good sounding advice on the discussion board here: https://discussions.apple.com/thread/4243511 and have the list of output from my Terminal. Does anyone mind looking below to see if there seems to be a keylogger in th
-
Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme
Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn
-
Oracle 8i hase Time series for defining calendars and other functions. How does Oracle 10g/11g support Time series features. I could not find any information about Time Series in the 10g/11g documentation.
-
[Solved] Update of one of the packages requires java-runtime-openjdk
Hi. I wanted to perform a system update today but what I encountered is that one of the packages wants specifically a java-runtime-openjdk instead of java-runtime. I wonder what package and why. I don't want to install openjdk since I use an Oracle J