IPlanet Directory Server 5.01 shows the admin password in full text in the adm.conf file. I now version 4 has a patch to fix this but does 5.0?

When you choosing password encryption as no encryption then only it will store in full text.In iDS5.0 Salted Secure Hashing Algoritham is default encryption algoritham.

Similar Messages

How do I stop a copy of backup files? Time Machine filled my extern HD, I bought a 2TB, drag and drop the old backup files and now my iMac has been stuck in "preparing copy" mode all night.

My 235 MB external HD was full, I bought a new 2TB and dragged and dropped the old backup files to it. Now my iMac is frozen in "preparing copy" mode. How can I 'unfreeze' it? How should I move the backup files from one external HD to the other?

This has been answered here so may times (especially by pondini, e.g. in this thread Time Machine stuck in repeating "preparing files" cycle), so please search this forum the next time before asking such a question.

I have Labview 5.0 and I can't run a program it gives me a runrime error C++ relating to the Labview exe file. Do you know where to start to fix this?

I've had this version for quite a long time and haven't had any problems with it. When I start Labview normally it seems to work fine I can look at individual Vi's and such but when I go to start a Vi program or even the tutorial it gives me a "Runtime error message C++
C:\Program File\National Instruments\LabView\LabView.exe abnmormal program termination." I'm not sure if it is a computer problem DAQ card (PCI 6023E) problem or a software glich. If you have any ideas of where to start tracking this down please let me know ASAP. It is a work stoppage situation.
Thanks for your consideration
Maurice Massey
UES,Inc

Have you tried doing a repair or reinstalling?

Solaris 8 and iPlanet Directory Server 5.1: Help

Could anyone help with advice or where to find documentation of how to setup a Solaris 8 client machine to authenticate against iPlanet Directory Server 5.1? The only documentation (eg books, BluePrint articles) I can find cover iPlanet Directory 4.11 or 4.12 and a Solaris 8 client. Even the tools from the BluePrint Tools area at Sun only talk about using iPlanet Directory Server 4.11/12. Quite a lot seems to have change from iDS 4.12 to iDS5.1.
Any help would be greatly appreciated.
Thanks in advance,
Stewart

Hi Steven, I suppose that this question is identical to your other question: " Topic: solaris 8 client setup with solaris 9 ldap".
So the answer will be the same.
You may find what you are looking for in the following technical note: http://knowledgebase.iplanet.com/ikb/kb/articles/7966.html
It is called: "Cookbook for Solaris 8 client with Directory Server 5.1/Solaris 9"
Cheers / Damien.

Can`t install CA in iPlanet Directory Server 5.0 ??

Hi All,
i try to install a self-signed CA-certifikate, under "CA-Certs" in
iPlanet Directory Server 5.0.
The certificate is generated using the tool "ssleay" or from an
Windows2000-CA.
Always i get "the certificate specified is not a valid CA certificate,
installation aborted"
thanks in advance
S. Horn

Hi Sven
I'm having a similar problem. I generated my self-signed cert. using keytool. Did u find an answer to ur query? If so please inform.
regards
Sikka

Error after Installing and updating the DADS.CONF file

I was able to get all the software installed for AE 3.0.1 and open the HTTP Server prior to updating the DADS.CONF File.
So far I have not been able any errors in the Apache/Apache/logs directory that point to the issue.
When I put the following DADS.CONF file in place:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "c:\oracle\product\10.2.0\db\Apache\Apache\images\"
AddType text/xml xbl
AddType text/x-component htc
<Locations /pls/apex>
Order deny, allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString ASGUSMAUDV01:1521:APPEXP ServiceNameFormat
PlsqlNLSLanguage AMERCAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>
I cannot not even access the HTTP Server using the default connect sting. Any help in looking over the DADS.CONF file is appreciated.
Thanks

Contents of the ERROR.LOG
[Tue Aug 21 12:39:44 2007] [notice] FastCGI: process manager initialized
[Tue Aug 21 12:58:33 2007] [notice] FastCGI: process manager initialized
Both of these were using the blank DADS.CONF
Access.log (Blank DADS.CONF)
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET / HTTP/1.0" 200 15062
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/upperbox.gif HTTP/1.0" 200 153
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-green.gif HTTP/1.0" 200 952
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-content.gif HTTP/1.0" 200 809
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/blue-content.gif HTTP/1.0" 200 37
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrnse.gif HTTP/1.0" 200 148
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrsm.gif HTTP/1.0" 200 924
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrtb.gif HTTP/1.0" 200 901
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrt.gif HTTP/1.0" 200 1015
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asylrhs.gif HTTP/1.0" 200 910
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/rhshadow.gif HTTP/1.0" 200 59
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asylttb.gif HTTP/1.0" 200 863
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asysrb.gif HTTP/1.0" 200 923
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/welcomeHTTP.gif HTTP/1.0" 200 2780
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/bisspace.gif HTTP/1.0" 200 43
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asybase.gif HTTP/1.0" 200 49
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/tree_document.gif HTTP/1.0" 200 97
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/art3.gif HTTP/1.0" 200 18752
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/lowerbox.gif HTTP/1.0" 200 150
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/relatedapps_cctitle.gif HTTP/1.0" 200 279
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/slieghright.gif HTTP/1.0" 200 69
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asytlse.gif HTTP/1.0" 200 830
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/home_banner_2.gif HTTP/1.0" 200 6505
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/portals.css HTTP/1.0" 200 14795
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/space.gif HTTP/1.0" 200 43
I have found no other errors.

When I answer my iPhone 4s, I cannot here the person calling unless I switch to speakerphone. How can I fix this?

When I answer my iPhone 4s I cannot hear the person calling unless I switch to speakerphone. How do I fix this?

does it work with the headset connected if so then it's stuck in headset mode
https://discussions.apple.com/thread/1343532?start=315&tstart=0

Question re how iPlanet Directory Server applies the Look Through Limit.

I have a question on how iPlanet Directory Server applies the lookthrough limit...
I am running an LDAP search on a 4.13 directory. The search filter is:
"(&(rtrdaMaturityDate>=20020128)(rtrdaMaturityDate<=20020130))"
rtrdaMaturityDate is an int, and indexed with pres,eq,sub
There are 244680 entries where rtrdamaturityDate>=20020128
383005 entries where rtrdaMaturityDate<=20020130
484 entries which satisfy both conditions
When the query is run as Directory Manager it just hangs (presumably it would complete eventually).
When run as another user it gives a size limit error. The size limit and lookthrough limit on the directory are both 5000 . As the matching number of entries doesn't exceed the size limit, I think perhaps it is the lookthrough limit causing the problem...
It looks as if it treats each part of the filter separately, building an candidate list for each, giving an error if both reach the look through limit. i.e. it does not realise that both parts of the filter could be treated together.
Is this correct ?
This theory is born out by the fact that if I change the value so the filter would logically return only the highest few values, the search works (i.e. as if the <= filter condition hit LTL, but the >= did not).
Also, if I add another condition to give "(&(rtrdaIssuerBgNid=4403)(rtrdamaturityDate>=20020128)(rtrdaMaturityDate<=20020130))" then the search eventually correctly returns a single entry. (IssuerBgNid=4403 on its own gives 1004 entries).
Can I therefore assume that a seach will only work if at least one condition in the filter gives a candidate list with less entries than the look through limit?
Any advice on how to implement a range search like this would also be much appreciated.
Thanks,
Dave.

The lookthrough limit is reached when the resulting candidate list contains more entries than the limit...
Lookthrough limit has been implemented specifically to for Range filters (and OR filters) to avoid consuming too many resources.
For your particular problem, you can increase the lookthrough limit... but it will affect all users and searches.
Note that iPlanet Directory Server 5.x does provide a per User LookThrough Limit (and other limits as well), therefore you could just increase the lookthrough limit for the specific users performing these searches.
Regards,
Ludovic.

What is the architecture of iplanet Directory Server Integration Edition tool?

hi,
There is no separate architecture for iDSIE.
iPlanet Directory Server Integration Edition is an integrated solution that provides meta-directory services combined with secure, highly available directory services.Further details visit this link
http://docs.iplanet.com/docs/manuals/dsie/50/intro/dsie-ina.htm#15695

Error while installing iplanet directory server 5.0

Hi I am trying to install iPlanet directory server 5.0 on my local machine.My computer name doesnot contain any domain name.it is simply like "ERT3210".
While installing Directory server it is asking for the computer name and if i give the computer name without domain it is not accepting.And i am unable to rename my computer name suffixing domain name as it is not contained in any domain..Now How can i give the computer name to install directory server?.Its very urgent for me.It will be great help if any one give reply.

Start/Stop Directory Server and Start/Stop Admin Server are usually present in My Computer/Manage/Services, just start or stop the service.
Assuming the install root directory is %LDAP_ROOT%
You could always create program icons for
1) start/stop dirrectory server
%LDAP_ROOT%\slapd-%COMPUTERNAME%\start-slapd.exe
%LDAP_ROOT%\slapd-%COMPUTERNAME%\stop-slapd.exe
2) start/stop admin server
%LDAP_ROOT%\start-admin.exe
%LDAP_ROOT%\stop-admin.exe
3) SUN ONE Console (iPlanet Console)
%LDAP_ROOT%\startconsole.exe
Gary

Roles in iPlanet Directory Server v5.0 und JNDI.

Hi!
I have the following problem:
How can I find and change the Role object in iPlanet Directory Server v5.0 via JNDI? It's possible ?
Regards,
Andriy

Hi,
It is not necessary to go in such a way for going and adding the corresponding roles.
For eg
Here is an LDIF file which plays an important role in making the attributes.
Here is an sample fedup.ldif file
dn: uid=timb,ou=Customers,o=fedup.com
objectclass: customer
objectclass: inetorgperson
objectclass: organizationalPerson
objectclass: person
objectclass: top
cn: Tim Briggs
uid: timb
givenname: Tim
customerid: timb
sn: Briggs
facsimiletelephonenumber: 4101
telephonenumber: 4145
creatorsname: uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
createtimestamp: 20000401084012Z
aci: (target="ldap:///uid=timb,ou=Customers,o=fedup.com")(targetattr="*")(version 3.0; acl "unknown"; allow (all) userdn = "ldap:///anyone": )
ou: Customers
mail: [email protected]
userpassword: bakru
modifiersname: uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
modifytimeStamp: 20000502084001Z
Here I have sepecified userid as timb and password as bakru and with corresponding roles in aci.
After making the LDIF file you have to import it in Directory server.
For that you have to Iplanet Console menu, from there click on Import for the ldif file to get imported.
Or else you can go for ldapadd, ldapmodify commands.
Also if you are going to add new attributes which is not known by Directory server, Please follow these process.
Creation of our own USER SCHEMA Files:-
It is necessary for adding the attributes which are not defined in the
Netscape directory server. In the above, customerid which is defined in ldif
file is not existing in the directory server.
Here is the Schema file for attributes:(ie for defining for eg customer id).
The name of the file is slapd.user_at.conf:-
attribute customerid customerid-oid cis single
attribute packageid packageid-oid cis single
attribute receivedate receivedate-oid cis single
attribute shipdate shipdate-oid cis single
attribute shipperid shipperid-oid dn single
attribute receiveid receiveid-oid dn single
#Java Attributes
# Schema for storing java objects and java object references
attribute javaClassName 1.3.6.1.4.1.42.2.27.4.1.1 ces single
attribute javaCodebase 1.3.6.1.4.1.42.2.27.4.1.6 ces
attribute javaSerializedData 1.3.6.1.4.1.42.2.27.4.1.7 bin single
attribute javaRemoteLocation 1.3.6.1.4.1.42.2.27.4.1.8 ces single
attribute javaFactory 1.3.6.1.4.1.42.2.27.4.1.4 ces single
attribute javaReferenceAddress 1.3.6.1.4.1.42.2.27.4.1.3 ces
Here is Schema file for your own object classes:-
The name of the file is Slapd.user_oc.conf:-
In the similar way we assume that there are no "customer" class in the object classes
defined in the LDAP, so we will have to create our own "customer" Object class.
Also it extends inetOrgPerson to add some new attributes such as "customerid".
The object class of an entry specifies what attributes are required and what
attributes are allowed in a particular entry.
Also for eg, Package classes in the object class is created.
Here is the sample file for creating the above:-
objectclass package
oid package-oid
superior top
requires
packageid,
receiveid,
shipdate,
shipperid
allows
description,
ou,
receivedate
objectclass customer
oid customer-oid
superior inetorgperson
requires
customerid
allows
c
#JAVA Schema
# Schema for storing java objects and java object references
objectclass javaContainer
oid 1.3.6.1.4.1.42.2.27.4.2.1
superior top
requires
cn
objectclass javaObject
oid 1.3.6.1.4.1.42.2.27.4.2.4
superior top
requires
javaClassName
allows
javaCodebase
objectclass javaSerializedObject
oid 1.3.6.1.4.1.42.2.27.4.2.5
superior javaObject
requires
javaSerializedData
objectclass javaRemoteObject
oid 1.3.6.1.4.1.42.2.27.4.2.6
superior javaObject
requires
javaRemoteLocation
objectclass javaNamingReference
oid 1.3.6.1.4.1.42.2.27.4.2.7
superior javaObject
requires
javaReferenceAddress,
javaFactory
STEP 4: Loading the USER SCHEMA files in Directory Server:-
All the attributes created above should be added to the corresponding directory server,
in order to make it as a common attribute.
Steps for adding the User Schema files to the Directory Server:-
1. Copy the above user schema files to the appropriate instance of Netscape Directory Server
created above so that the existing LDIF file which is used in the Netscape directory
server is not appended or overwritten.
2. For eg, put it in "NetscapeServer/slapd-HostName/config" to replace the empty
files "slapd.user_at.conf" and "slapd.user_oc.conf" by default.
3. Then restart the Directory Server.
I hope this will help you.
Thanks
Bakrudeen
Technical Support Engineer
Sun MicroSystems Inc, India

Info about Japanese iPlanet Directory server

I am evaluating Japanese localized version of directory server.
I am not able to find any document which can tell me about the
localization of this product.
I have following questions:
1. What level of localization is done. Has console localized ?
Does log messages localized.
2. What env variables I need to set to see console GUI in Japanese
3. Do I need to set some env variables (like $LANG) before running the start script.
It is urgent for me, if somebody can answer these or point me to some good doc, it will great
help to me
Thanks
- Bharat

Hi,
Info about japanese iPlanet directory Server.
Gateway is localized for English, Japanese, French, Spanish, and German. You can configure the gateway to support additional locales.
Language files are stored in /usr/iplanet/servers/dsgw/html/lang and /usr/iplanet/servers/dsgw/config/lang, where lang is defined in RFC1766.
For example, language files for Japanese are stored in /usr/iplanet/servers/dsgw/html/ja and /usr/iplanet/servers/dsgw/config/ja[true]).
Support for the character sets necessary to render a particular locale (language) must be available in the browser's configuration.

IPlanet directory server can't start in a user account - A bug?

I installed iplanet directory server 5.1 in Solaris 9. I am using typical install mode. I set UserA/GroupA to represent the directoy server that means the directory server instance running in this user account. After I input the user name and group name, it gives a very strange message, say "suffix must have a valid dn. Press any key to continue" After I press any key, it continue to do other setup. Once instllation done, if I try to login as that user account and start-slapd, it just give an error message, " iplanet/servers/bin/slapd/server do not have permission". I checked this directory, UserA do not have even read access to the directory.
So is this a bug in this verion of directory server/
Thanks,
Iris

It's very likely that you gave an Invalid DN for the Suffix of your directory instance...
The setup should have asked again the DN... It looks like a problem with the setup command.
Ludovic

Store Print & File Server on iPlanet Directory Server?

I've a NT 4.0 server which I'm using as both a Print & File Server. Would I be able to use iPlanet Directory Server to do the same thing?
If I can, please explain how? or direct me to where I can know how?
If it can't be done, is there any other way(s) I can do it?
Thanks!

I don't understand. iDS is not a file and print server, it is a user data and user authentication server. Do you want to use iDS for your user authentication for file and print services instead of NT 4 domains? I don't think this is possible. What is possible is using iDS as your primary data store, and using iPlanet Meta Directory to sync changes from iDS to the NT 4 domain.

Last Logon Time in Iplanet Directory Server 4.1

Hi,
It would be great help if any one of you could let me know the attribute in Iplanet Directory Server 4.1 to get the Last Logon Time of a particular account.
The Directory Server is on solaris.
Thanks

Hari,
You can try to find it from the logfiles.
I actually designed a plugin for this type of thing, but it's not yet implemented. It would simply write a timestamp to a user's entry after every successful bind, among other things which I won't go into detail about now...
Oletko suomessa?
podzap

IPlanet Directory Server 5.01 shows the admin password in full text in the adm.conf file. I now version 4 has a patch to fix this but does 5.0?

Similar Messages

Maybe you are looking for