IPlanet Messaging Server 5.1 and POP Error?
I've noticed a strange bug with iMS v5.1 and POP (HP-UX). If I send a message with a binary attachment (~250KB), I cannot retrieve the message.
Example:
1. Type the following command after telnetting to port 110 on the server running iMS
USER uid
PASS password
RETR 1
In this case, iMS returns the entire message, but fails to add the "." which signals the end of message has been reached.
If I type "RETR 1" again, the entire message, including the "." is returned.
If your using portal in an open portal mode, then use the mail channel available. Unfortunately this does not work if your using a gateway.
Similar Messages
-
iPS Mobility Access Pack is an add-on package to iPS
It provides Calendar, Mail, and Address Book provider channels that easily integrate iMS, iCS, iDS, into Portal.
It helps to have an external LDAP configuration also,
this holds userid/passwords for both iMS and iCS and can be used for Portal to authenticate against. Just
configure via Portal admin a domain, authentication, LDAP.
Messaging needs some parameters configured.
Using configutil, set the following:
local.webmail.sso.enable 1
local.webmail.sso.prefix ssogrp1
local.webmail.sso.id msg50
local.webmail.sso.singlesignoff 1
service.http.ipsecurity no
Restart everything, and as a user, login using LDAP
authentication, then Edit your content enabling
the Mail Provider. With the Mail Provider enabled,
Edit the channel filling in the information based on
your Messenger Express client.
Good luck. -
Hi, there.
I wrote a custom plug-in for Netscape Messaging Server 4.15. The client for
whom I did this is now upgrading to iPlanet Messaging Server 5.1 and has
requested that I update the custom plug-in accordingly. Unfortunately, as
specified in the iPlanet migration documents, you have to re-code the
plug-in as a channel to get it to work under iPlanet Messaging Server...
I've scoured the documentation about how to go about doing this, but I don't
know how to get started as I don't know anything about writing a channel.
The plug-in processes incoming messages to see if they were sent from a
specific domain. It then adds an arbitrary signature to each appropriate
MIME part in the message before letting the messaging server relay it.
1. Can anyone direct me to some explicit directions about how to write a
channel for iPlanet Messaging Server? The documentation for Netscape
Messaging Server was extremely helpful; I haven't found anything equivalent
for iPlanet channels.
2. Channels run as daemons? Do you have to start them when the machine
boots, or are they started for you by the MTA as a result of the channel
configuration file?
3. Do channels listen with sockets on a particular port for communication?
Do I have to parse incoming data and encode outgoing data as if it was an
SMTP communication?
4. Can an SMTP channel co-exist with other SMTP channels on the same
machine? Do the channels have to listen on unique ports? (Sorry, my socket
programming is a little rusty.)
Anxiously awaiting your reply...
Sean Dockery
[email protected]What is the expected result of the plug-in?
Also, if you set the smtp log level to debug do you see it initializing the plugin at startup time and also entering the plugin during the smtp-accepts? -
Hi..
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
I heard that SUN have released security vulnerability in Sun Java System or iPlanet Messaging Servers that may allow remote unprivileged users to craft specific messages which contain Javascript to be executed in the end user's browser.
The problem can be solved by using iPlanet Messaging Server 5.2 (for Solaris 8 and 9) with patch 5.2hf2.13 or later..
where can I download patch 5.2hf2.13 for messaging server 5.2 ?Hi,
If you have a support contract with SUN you can log a service request to get a copy of the patch via:
http://www.sun.com/service/online/
Regards,
Shane. -
How do can we see the iplanet messaging server statistics?
I need to know how many emails our iplanet messaging server is processing per day/month/year etc and the volume of data that this represents. How can I read the logs? Is there a tool for doing this?
Thanks
PaulThe imap, pop, and http processes have counters, as does the MTA. Check out the manual for the command line utlities for iMS.
As for the MTA logs, the format is documented and thus you can easily write your own tool to parse and report on what you need. I did it years ago and I would share that with you but it has fallen behind in the format and thus needs serious updating.
There is no built in tool to process log files. -
A serious problem occurred while installing the iPlanet Messaging Server Init Config
Hi I have this error while working with iMS5.x and iAS6.5. As long as iMS is the only product installed, nothing is the problem. If I try installing iMS after iAS installed, it points an error. I dont know whats the reason. The following is the message that I got:
<b>
A serious problem occurred while installing the iPlanet Messaging Server Init Co
nfig. It reported the following problem:
The application command "jre -cp "/train/iplanet/server5/bin/msg/imta/classes/im
taconfig.jar" com.iplanet.msg.imta.config.InitConfig -d iplanet1.com -r iplanet1
.com -h shivaram.sun.com -c /train/iplanet/server5/msg-shivaram-2/imta/config" c
ould not be run.
Press any key to continue.
ON PRESSING ANY KEY, I GET...
Due to a serious problem the iPlanet Messaging Server installer is unable to con
tinue. Please examine the log file "/train/iplanet/server5/setup/msg/iplanet-ms
g-install.log" for more information.
Press any key to continue.
</b>
The content of "/train/iplanet/server5/setup/msg/iplanet-msg-install.log" file is:
<b>
Installer log started.
GMT: 20020426225748Z
NOTICE: Creating Common Product Configuration.
NOTICE: Running Directory Setup.
MESSAGE: running command
/train/iplanet/server5/install/perl /train/iplanet/server5/bin/msg/install/bin/ims_dssetup.pl -i yes -c /train/iplanet/server5 -d slapd-shivaram -r "o=internet" -u "o=isp" -s yes -S /train/iplanet/server5/bin/msg/install/bin/config
cmdpath: none
runpath: none
NOTICE: Creating Messaging Product Information in LDAP.
NOTICE: Creating Messaging users/groups information in LDAP.
NOTICE: Creating Messaging file links.
NOTICE: Running PostInstall Product After Hook.
MESSAGE: running command
perl prod-post-aft-hook.pl /train/iplanet/server5
cmdpath: /train/iplanet/server5/install
runpath: /train/iplanet/server5/bin/msg/install/bin
NOTICE: Creating Instance Name.
NOTICE: Creating Messaging Common Instance Files.
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/configutil /train/iplanet/server5/msg-shivaram-2/configutil
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/counterutil /train/iplanet/server5/msg-shivaram-2/counterutil
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/expire /train/iplanet/server5/msg-shivaram-2/expire
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/getconf /train/iplanet/server5/msg-shivaram-2/getconf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/refresh /train/iplanet/server5/msg-shivaram-2/refresh
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/setconf /train/iplanet/server5/msg-shivaram-2/setconf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/start-msg /train/iplanet/server5/msg-shivaram-2/start-msg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/stop-msg /train/iplanet/server5/msg-shivaram-2/stop-msg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/start-ens /train/iplanet/server5/msg-shivaram-2/start-ens
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/stop-ens /train/iplanet/server5/msg-shivaram-2/stop-ens
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/README.txt /train/iplanet/server5/msg-shivaram-2/README.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imsimta /train/iplanet/server5/msg-shivaram-2/imsimta
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/ChannelDefaults.opt /train/iplanet/server5/msg-shivaram-2/imta/config/ChannelDefaults.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/big5.txt /train/iplanet/server5/msg-shivaram-2/imta/config/big5.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/cns11643.txt /train/iplanet/server5/msg-shivaram-2/imta/config/cns11643.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/gb2312.txt /train/iplanet/server5/msg-shivaram-2/imta/config/gb2312.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/jis0208.txt /train/iplanet/server5/msg-shivaram-2/imta/config/jis0208.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/jis0212.txt /train/iplanet/server5/msg-shivaram-2/imta/config/jis0212.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/ksx1001.txt /train/iplanet/server5/msg-shivaram-2/imta/config/ksx1001.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charnames.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charnames.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsets.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsets.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsets_ps.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsets_ps.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/charsubs.txt /train/iplanet/server5/msg-shivaram-2/imta/config/charsubs.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/countries.txt /train/iplanet/server5/msg-shivaram-2/imta/config/countries.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dirsync.opt /train/iplanet/server5/msg-shivaram-2/imta/config/dirsync.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dispatcher.cnf /train/iplanet/server5/msg-shivaram-2/imta/config/dispatcher.cnf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dl_auth.map /train/iplanet/server5/msg-shivaram-2/imta/config/dl_auth.map
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/dns_canonical.rules /train/iplanet/server5/msg-shivaram-2/imta/config/dns_canonical.rules
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/imta_tailor /train/iplanet/server5/msg-shivaram-2/imta/config/imta_tailor
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/internet.rules /train/iplanet/server5/msg-shivaram-2/imta/config/internet.rules
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/job_controller.cnf /train/iplanet/server5/msg-shivaram-2/imta/config/job_controller.cnf
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/languages.txt /train/iplanet/server5/msg-shivaram-2/imta/config/languages.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/magic.dat /train/iplanet/server5/msg-shivaram-2/imta/config/magic.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum_charset.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum_charset.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/maximum_command.dat /train/iplanet/server5/msg-shivaram-2/imta/config/maximum_command.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/name_content.dat /train/iplanet/server5/msg-shivaram-2/imta/config/name_content.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/option_charset.dat /train/iplanet/server5/msg-shivaram-2/imta/config/option_charset.dat
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_bounced.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_bounced.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_deferred.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_deferred.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_delayed.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_delayed.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_delivered.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_delivered.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_failed.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_failed.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_forwarded.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_forwarded.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_header.opt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_header.opt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_prefix.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_prefix.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_suffix.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_suffix.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/config/locale/C/LC_MESSAGES/return_timedout.txt /train/iplanet/server5/msg-shivaram-2/imta/config/locale/C/LC_MESSAGES/return_timedout.txt
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/sendmail /train/iplanet/server5/msg-shivaram-2/imta/bin/sendmail
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/cshrc /train/iplanet/server5/msg-shivaram-2/imta/bin/cshrc
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/imta/bin/kshrc /train/iplanet/server5/msg-shivaram-2/imta/bin/kshrc
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/attach_fs.html /train/iplanet/server5/msg-shivaram-2/html/attach_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/collect_fs.html /train/iplanet/server5/msg-shivaram-2/html/collect_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/comp_fs.html /train/iplanet/server5/msg-shivaram-2/html/comp_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fldr_fs.html /train/iplanet/server5/msg-shivaram-2/html/fldr_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/frame.html /train/iplanet/server5/msg-shivaram-2/html/frame.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ldap_fs.html /train/iplanet/server5/msg-shivaram-2/html/ldap_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/mbox_fs.html /train/iplanet/server5/msg-shivaram-2/html/mbox_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/msg_fs.html /train/iplanet/server5/msg-shivaram-2/html/msg_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/opts_fs.html /train/iplanet/server5/msg-shivaram-2/html/opts_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/receipt_fs.html /train/iplanet/server5/msg-shivaram-2/html/receipt_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/compRecipient.js /train/iplanet/server5/msg-shivaram-2/html/compRecipient.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/editPabEntry.js /train/iplanet/server5/msg-shivaram-2/html/editPabEntry.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/form.js /train/iplanet/server5/msg-shivaram-2/html/form.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/editPabGroup.js /train/iplanet/server5/msg-shivaram-2/html/editPabGroup.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/lookup.js /train/iplanet/server5/msg-shivaram-2/html/lookup.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/main.js /train/iplanet/server5/msg-shivaram-2/html/main.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/pab.js /train/iplanet/server5/msg-shivaram-2/html/pab.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/util.js /train/iplanet/server5/msg-shivaram-2/html/util.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/default.html /train/iplanet/server5/msg-shivaram-2/html/en/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/mail.html /train/iplanet/server5/msg-shivaram-2/html/en/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/en/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/help2.htm /train/iplanet/server5/msg-shivaram-2/html/en/help2.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/ix.htm /train/iplanet/server5/msg-shivaram-2/html/en/ix.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/topics.htm /train/iplanet/server5/msg-shivaram-2/html/en/topics.htm
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/i18n.js /train/iplanet/server5/msg-shivaram-2/html/en/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/en/iplanet.jpg /train/iplanet/server5/msg-shivaram-2/html/en/iplanet.jpg
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/default.html /train/iplanet/server5/msg-shivaram-2/html/ja/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/mail.html /train/iplanet/server5/msg-shivaram-2/html/ja/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/ja/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ja/i18n.js /train/iplanet/server5/msg-shivaram-2/html/ja/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/default.html /train/iplanet/server5/msg-shivaram-2/html/ko/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/mail.html /train/iplanet/server5/msg-shivaram-2/html/ko/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/ko/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/ko/i18n.js /train/iplanet/server5/msg-shivaram-2/html/ko/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/default.html /train/iplanet/server5/msg-shivaram-2/html/de/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/mail.html /train/iplanet/server5/msg-shivaram-2/html/de/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/de/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/de/i18n.js /train/iplanet/server5/msg-shivaram-2/html/de/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/default.html /train/iplanet/server5/msg-shivaram-2/html/fr/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/mail.html /train/iplanet/server5/msg-shivaram-2/html/fr/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/fr/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/fr/i18n.js /train/iplanet/server5/msg-shivaram-2/html/fr/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/default.html /train/iplanet/server5/msg-shivaram-2/html/es/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/mail.html /train/iplanet/server5/msg-shivaram-2/html/es/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/es/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/es/i18n.js /train/iplanet/server5/msg-shivaram-2/html/es/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/default.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/editPabGroup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/lookup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/lookup_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/mail.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/mail.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/pab_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-CN/pab_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-CN/i18n.js /train/iplanet/server5/msg-shivaram-2/html/zh-CN/i18n.js
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/compRecipient_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/compRecipient_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/default.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/default.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/editPabEntry_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/editPabEntry_fs.html
cmdpath: none
runpath: none
MESSAGE: running command
cp /train/iplanet/server5/bin/msg/install/templates/msg-inst/msg/html/zh-TW/editPabGroup_fs.html /train/iplanet/server5/msg-shivaram-2/html/zh-TW/editPabGroup_fs.html
cmdpath: noneYou are probably installing on a hardened machine.
The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
1- the library name is libX11.so.4 and
2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
You can check the results running <server-root>/bin/base/jre/bin/jre
Hope that helps and sorry about my poor english. -
Where can i find the IPlanet Messaging Server API
I am trying to log a user into the IPlanet Messaging Server when the user logs into the IPlanet Portal Server. I would like to create a SSO effect between the portal server and the messaging server.
ThanksCheck out the documentation for PMDF API and SIMS API. The MTA comes from PMDF. I just did a quick check and could not find out when documentation will be out regarding iMS-MTA API.
For what you want to accomplish I don't think the MTA-API is where you need to be looking. I know that ME and iDA SSO can be enabled, and I think it can be done with Portal as well, but I do not know how. -
Please help me about the Iplanet Messaging Server,SOS!!!!!
I have just installed Iplanet DS and IPlanet Messaging Server 5.2 .But I can only use web to check or send mail . When I use Out Look Express ,I can only send mail and not check mail.Please give me the reason and solution.
How did you set the user up? Have you implemented "direct ldap", per Appendix A in the Admin Guide?
-
IPlanet Messaging Server -- kill session at browser close
iPlanet Messaging Server 5.2 HotFix 2.09
We found a potential security risk.
When a person loads Messenger Express through the web and closes their browser, another person can come in behind them and resume the previous persons session. This is accomplished by going through the browser history and accessing any of the links that point inside the mail client.
When the browser closes, the session isnt killed. Its only killed/inaccessible if the user times out or clicks log-out. We've tested this on just about any browser we can get our hands on.
Is there a fix/patch/workaround for this? I've combed the documentation and the site and can find nothing.
We are using the product in an University environment and this can be particularly nasty in the labs.
Thanks!iPlanet Messaging Server 5.2 HotFix 2.09
We found a potential security risk.
When a person loads Messenger Express through the web
and closes their browser, another person can come in
behind them and resume the previous persons session.
This is accomplished by going through the browser
history and accessing any of the links that point
inside the mail client.Yep. that's true. And, it 's not possible to "fix" that. The reason it cannot be fixed, is that http is stateless. The server can't know when you simply close a browser, instead of you still being there.
There is an idletimeout that defaults to 10 minutes.
>
When the browser closes, the session isnt killed. Its
only killed/inaccessible if the user times out or
clicks log-out. We've tested this on just about any
browser we can get our hands on.Right. This is a basic limitation of the http protocol. It's not something we CAN fix.
>
Is there a fix/patch/workaround for this? I've combed
the documentation and the site and can find nothing.
We are using the product in an University environment
and this can be particularly nasty in the labs.You will have to educate your users to log out. That's all I can suggest.
>
Thanks!
ashley -
How to disable one email account in iPlanet Messaging Server 4.5
Hi,
Any one can tell me how to disable a single user in iPlanet Messaging Server 4.5.
Thanks
AbidI wonder what product you're really talking about.
There was never a product called, "Netscape Messaging Server 4.5". There was 4.1 and 4.15, but the next product was 5.0.
These are all long discontinued, and nobody should be using them anymore.
Assuming it's 4.1, check your ldap record for "inetuserstatus" and set it to "disabled", or even "deleted" -
IPlanet Messaging Server timeout
Hi,
We have iPlanet Messaging Server 5.2 HotFix 2.02 (built Oct 21 2004) installed in one of our Solaris8 boxes. While deposting message using SMTP we are getting a timeout. We need to wait more than 30seconds for the message to get deposited.
This was not happening earlier.
I am a novice in Messging server configuration/trouble shooting.
Could anyone help us with this. This is a pressing need and your help is highly appreciated.
Thanks in advance.
~AbhijitHi,
duttaab wrote:
We have iPlanet Messaging Server 5.2 HotFix 2.02 (built Oct 21 2004) installed in one of our Solaris8 boxes. While deposting message using SMTP we are getting a timeout. We need to wait more than 30seconds for the message to get deposited.
This was not happening earlier.What has changed recently in your environment? Have you patched your system?
Could anyone help us with this. This is a pressing need and your help is highly appreciated.If this is a pressing issue you should be logging a Sun support request (assuming you have a support contract of course).
Given the length of the timeout I can hazard a guess that the problem is DNS related. The usual timeout for DNS problems is ~30 seconds. Have you changed anything DNS related/DNS networking issues?
If you telnet to your mail-server (port 25) does it take a long time for the initial banner message to return?
e.g.
telnet <mailserver> 25
Regards,
Shane. -
I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
ShyamHi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs? -
Can,t sign in icloud on pc. Message- server err. id and pass working in itune
can,t sign in icloud on pc. Message- server err. id and pass working in itune
Greetings alixniti,
Thanks for contributing to the Apple Support Communities.
It sounds like you were not able to send a verification code from iCloud on March 11th.
The iCloud services were briefly experiencing issues at that time, which may have affected your attempts. You can see the system status for Apple services at this link:
Apple - Support - System Status
Please try sending the verification code again, if you haven't already. Feel free to reply and let us know if the issue continues.
Best Regards,
Jeremy -
After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinacathis will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors
-
Messaging Server 7u2-7.02 + uwc error + aci erros
Hello,
I have
bash-3.00# /opt/sun/comms/messaging64/sbin/imsimta version
Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)
libimta.so 7u2-7.02 64bit (built 02:28:03, Apr 16 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
SunOS fe1.army.mil 5.10 Generic_137138-09 i86pc i386 i86pc
Directory server - Directory server 6.2I am seeing below messages in directory error log.
I have resolved that "'" problem of aci by solution provided on one of the thread.
[28/May/2009:16:38:37 +0530] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 - Warning: Bad targetfilter((!(|(nsroledn=cn=Top-level Admin Role,dc=army,dc=mil)(entrydn=ou=ericssonr320_r1a_(fast_wireless_crawler,ou=internaldata,ou=1.0,ou=sunamclientdata,ou=clientdata,dc=army,dc=mil)))) in aci: does not match
[28/May/2009:16:38:39 +0530] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 - Warning: Bad targetfilter((!(|(nsroledn=cn=Top-level Admin Role,dc=army,dc=mil)(entrydn=ou=nokia7110_v0.13_(compatible_yospace_smartphone_emulator_1.0,ou=internaldata,ou=1.0,ou=sunamclientdata,ou=clientdata,dc=army,dc=mil)))) in aci: does not match
[28/May/2009:16:38:39 +0530] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 - Warning: Bad targetfilter((!(|(nsroledn=cn=Top-level Admin Role,dc=army,dc=mil)(entrydn=ou=nokia_6210_v0.13_(compatible_yospace_smartphone_emulator_1.,ou=internaldata,ou=1.0,ou=sunamclientdata,ou=clientdata,dc=army,dc=mil)))) in aci: does not match
[28/May/2009:16:38:39 +0530] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 - Warning: Bad targetfilter((!(|(nsroledn=cn=Top-level Admin Role,dc=army,dc=mil)(entrydn=ou=nokia_7110_v0.13_(compatible_yospace_smartphone_emulator_we,ou=internaldata,ou=1.0,ou=sunamclientdata,ou=clientdata,dc=army,dc=mil)))) in aci: does not match
[28/May/2009:16:38:39 +0530] - INFORMATION - NSACLPlugin - conn=-1 op=-1 msgId=-1 - Warning: Bad targetfilter((!(|(nsroledn=cn=Top-level Admin Role,dc=army,dc=mil)(entrydn=ou=sie-c3i_1.0_up_4.1.8c_up.browser_4.1.8c-xxxx_(compatible__yo,ou=internaldata,ou=1.0,ou=sunamclientdata,ou=clientdata,dc=army,dc=mil)))) in aci: does not match
multiple messages for above Logging to UWC showing error of misconfiguration, and uwc logs says below.
May 28, 2009 5:03:55 PM com.sun.uwc.common.auth.LDAPAuthFilter doFilter
INFO: --------Inside ldapfilter-----
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper getUserValidation
INFO: getUserEntry: Getting user entry now
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper getUserValidation
INFO: Getting connection -----
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper getUserValidation
INFO: binding ----
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper getUserValidation
INFO: now making search -----
May 28, 2009 5:03:55 PM com.sun.uwc.common.auth.LDAPAuthFilter doFilter
INFO: login:10.77.45.29:sumant:login successful
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel initializeForAuthUser
INFO: ObjectClass: sunUCPreferences for DN: uid=sumant,ou=People,o=army.mil,dc=army,dc=mil is present
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel initializeForAuthUser
INFO: UC Prefs Initialized : sunUCInitialized is present and value is true
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel initializeAndObtainPrefs
INFO: Value from LDAP for: sunUCExtendedUserPrefs:sunUCInitialized is sunUCInitialized=true
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel initializeAndObtainPrefs
INFO: UC multi-val Attribute : sunUCExtendedUserPrefs: landingPage is not obtained
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCDefaultApplication value: addressbook
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCTheme value: uwc
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCColorScheme value: 2
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCDefaultEmailHandler value: uc
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCDateFormat value: M/D/Y
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCDateDelimiter value: /
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCTimeFormat value: 12
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val sunUCTimeZone value: America/Los_Angeles
May 28, 2009 5:03:55 PM com.sun.uwc.common.model.UserPreferencesModel setAttrValuesInSession
INFO: Not Multi-val preferredLanguage value: en
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper replayMailProxyAuth
SEVERE: Connection refused
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper replayMailProxyAuth
SEVERE: Proxy auth with mail for user sumant has failed. This may be due to
i.wrong webmail proxy credentials in uwcconfig.properties or
ii.MS config parmater local.http.uwcenabled is not set
iii.Mismatch between webmail.cookiename in uwcconfig.properties and local.service.http.cookiename in webmail
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCApplicationHelper decryptPwrd
INFO: -------Decrypt is done ----------
May 28, 2009 5:03:55 PM com.sun.uwc.common.UWCUserHelper createCalStore
SEVERE: calsession not created calstore connect has failed
May 28, 2009 5:03:55 PM com.sun.uwc.calclient.CalModuleServlet onInitializeHandler
SEVERE: Error[onBeforeRequest:getCalStore] [Error:getCalStore] - Could not create store
May 28, 2009 5:04:00 PM com.sun.uwc.common.UWCUserHelper cleanWebmailSession
SEVERE: Connection refused
May 28, 2009 5:04:00 PM com.sun.uwc.common.auth.LDAPAuthFilter doFilter
INFO: --------Inside ldapfilter-----I have configuration set as
bash-3.00# /opt/sun/comms/messaging64/sbin/getconf local.webmail.sso.uwcenabled
1
bash-3.00# /opt/sun/comms/messaging64/sbin/getconf local.service.proxy.admin
[email protected] has been set for local.service.http.cookiename and properties file have the default value webmailsid
what's wrong going on...?
I am able to send and receive message from front server using IMAP and SMTP
thanks,
SumantHello,
now I have upgraded to 6.3.
After recreating a test user I am able to see address book and options tab in UWC, however not Mail
UWC logs says
May 28, 2009 7:42:10 PM com.sun.uwc.common.UWCApplicationHelper decryptPwrd
SEVERE: Error while decrypting javax.crypto.BadPaddingException: Given final block not properly padded
May 28, 2009 7:42:10 PM com.sun.uwc.common.auth.LDAPConfig initUG
SEVERE: Error in decrypting LDAP_BINDCRED
May 28, 2009 7:42:10 PM com.sun.uwc.common.auth.MailProxyFilter init
INFO: Initialized SecureDirFilter
May 28, 2009 7:42:10 PM com.sun.uwc.calclient.MultipartFormServletFilter init
INFO: /var/opt/sun/comms/ce/tempFileStore/already exist, check the file permission if file upload is not working
May 28, 2009 7:42:11 PM com.sun.uwc.common.UWCApplicationHelper decryptPwrd
SEVERE: Error while decrypting javax.crypto.BadPaddingException: Given final block not properly paddedPlease see that the some of the configuration parameter for uwc given in first message of thread.
messaging http logs says
[29/May/2009:11:25:00 +0530] fe1 httpd[3231]: Account Information: connect [127.0.0.1:51092]
[29/May/2009:11:25:00 +0530] fe1 httpd[3231]: General Information: [127.0.0.1:51092] HEAD / HTTP/1.0
[29/May/2009:11:25:00 +0530] fe1 httpd[3231]: Account Notice: close [127.0.0.1:51092] [unauthenticated] 2009/5/29 11:25:00 0:00:00 19 0 0
[29/May/2009:11:35:00 +0530] fe1 httpd[3231]: Account Information: connect [127.0.0.1:53199]
[29/May/2009:11:35:00 +0530] fe1 httpd[3231]: General Information: [127.0.0.1:53199] HEAD / HTTP/1.0
[29/May/2009:11:35:00 +0530] fe1 httpd[3231]: Account Notice: close [127.0.0.1:53199] [unauthenticated] 2009/5/29 11:35:00 0:00:00 19 0 0
[29/May/2009:11:36:43 +0530] fe1 httpd[3231]: Store Debug: session_expire: starting
[29/May/2009:11:36:43 +0530] fe1 httpd[3231]: Store Debug: session_expire: donethanks,
Sumant
Edited by: mr.chhunchha on May 29, 2009 11:41 AM
Maybe you are looking for
-
Problem with errorPage in page directive tag while proxying request from iPlanet to WebLogic
Hi, We are using iPlanet 4.0 as the webserver and WebLogic 5.1 as the application server on different solaris machines. We have put our JSPs in the weblogic application server and proxy the requests from iplanet to weblogic.
-
Multiple Key figure in a single column of a query
Hi, Is it possible to use muliple key figure like Amount and Qty field together in a column of a query? Please advise, Best Regards, UR
-
How to add a push button in ALV Grid Top-of-page
Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.
-
Interactive PDF crashes Acrobat 9
Has anyone experienced interactive PDFs causing Acrobat 9 to crash? The PDF was created using the Interactive PDF preset in InDesign CS5. The file contains buttons, SWF animations, and videos. The file is about 300MB, mostly from the embedded videos.
-
How can I have only icons of apps tasklist in Awesome wm ver 3.5?
In Awesome 3.4 I it was possible to do this by modifying this line: mytasklist[s] = awful.widget.tasklist(function(c) local task = { awful.widget.tasklist.label.currenttags(c, s) } return '', task[2], task[3], task[4] end, mytasklist.buttons) This wo