Iplanet on win 2000

We have a copy of IPlanet 6.0 for NT. Can I use the same to install it on a
Windows 2000 machine. When I tried it says[on win2000 & win 2000 advanced
server] "ur system does not support". Is there a seperate version that can
be installed on win2000.
thanx
joe

Iam actually apprehensive of applying the patch.whether this will affect the system or the data.If you can please tell me how typical is applying the patch and how it will affect the system.Also from where I can get the procedure for the application of this patch.If after applying this patch if some critical problem comes then whether we can remove this patch safely and bring the system back into the original state or not and what will be the pocedure for removing this patch.

Similar Messages

9i installation problem on a Win 2000 P4 PC

Hi,
Although I am new to Oracle, with the help of documentation I successfully managed to install it on a Window 2000 PC without any major problems except for the one described below.
The problem is this:
When the PC was part of a campus domain (e.g., claflin.edu) I got "end-of-file on communication channel" and "internal error. hostdef extension doesn't exist" errors repeatedly many times during installation but I didn't get any when the PC was taken off the network and added to a workgroup.
Is there something I need to do to make it work on a network? Has anyone seen this same behavior on Win 2000 or is it something unique in my case?
By the way, I am also running the personal web server (PWS) in the same PC.
Any help will be greatly appreciated.
Thanks
Kuha M.

Hi Eric,
Ther should not be any problem in stalling NWDS SP9. Your case the problem may be
1)Insufficient Disk Space
2)Outdated vesrion of JDK
3) you might not have been downloded full fledged NWDS SP9 installer.
4)May be while installing NWDS it is not able to locate JDK in Directory.
if you check all these, i hope it will work!!!.
Regards,
RK

Related to creating pdf file through form6i in Win 2000

I have created a form which will generate pdf file by calling a report. I am able to generate pdf files in platforms like Win 2000,Win NT,Win 98. But expect in Win 2000, I am able to read the pdf file in acrobat.
The error displayed while opening pdf in acrobat is: There was a error processing this page,There was a problem to read this page (122).
Form6i and Reports6i is installed in Win 2000 and acrobat reader version is 5.0
Please answer my question immediately

Sorry Im totally new to acrobat so this may seem like a daft question> I have scanned a document through a document feed scanner into a pdf format but some of the pages are orientated the wrong way within the pdf, is there a way to change the direction of pages and then save the whole pdf again so that everything is the right way round. I know that you can change the orintation while reading the pdf but as this is being put into web ct for students I would prefer for them not to have to do this.

Get Windows Folder Paths on Win 2000

I downloaded the windows_folder_path.vi from NI site, where I can see that "This VI is supported on Windows 2000, XP, and Vista."
If I use it in an executable that searches for Application Data folder, it works under XP, but it doesn't under a fresh Win 2000 SP4 installation.
A pop-up with the message:
Entry poin Not found
The procedure entry point SaferGetPolicyInformation could not be located in the dynamic link library ADVAPI32.dll
is shown.
When I press the OK button, another popup
LabVIEW: Resource not found.
An error occurred loading VI 'windows_folder_path.vi'.
LabVIEW load error code 3: Could not load front panel.
I'm confused because here (MSDN, Microsoft Developer Network) I can see that the SaferGetPolicyInformationfunction requires WinXP or Vista
Isn't this vi expected working properly under Win 2000?
In the next days I'll do the same test on a Vista machine, and I hope....
How can I get the Application Data path on WinXP, 2000 and Vista? With different languages OS this folder has a different name (Application Data, Dati Applicazioni, ...) so I can't build the path by myself.
I don't know if this helps, but I'm developing with LabVIEW 8.2.1and WinXP Pro
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
Solved!
Go to Solution.

Use the registry functions of LV to get direct access.
The folders for the current logged in user is under:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is AppData
The Fodlers for all users is under:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders, the value is Common AppData
Message Edited by waldemar.hersacher on 10-22-2008 10:10 AM
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Ipod nano possible with win 2000???

my wife just got an ipod nano \(3rr gen) for her bday, and we have a computer with win 2000. now the only itunes we can find for win 2000 is ver. 7.3. when i downloaded this it tells me that i need ver. 7.4 or better. anyone got any info or tips for me... PLEASE

NO. That is NOT what the website says. When you go to the 732 for Windows 2000 d/l page, it clearly states you can use Win2k. The website says "iTunes is the best way to enjoy your digital music and video with your PC, iPod and Apple TV. iTunes 7.3.2 for Windows 2000 is designed to work with Windows 2000 Service Pack 4 or later. To use iTunes with Windows XP or Windows Vista, visit http://www.apple.com/itunes/download/ to download the latest version. Use iTunes to import CDs or download songs and videos from the iTunes Store. Make playlists perfect for any occasion. Burn playlists to CDs and play them on your home stereo. Sync your media with iPod to enjoy it on the go, or play your collection on your TV with Apple TV."
Why have so many missed this??? Apple is clearly stating they support Win2k - including sync to ipod. I so got one. I d/l the iTunes 732 for Win2k and it works fine - to play music (using it right now). But once I connect my new nano, I get the error message "The iPod 'IPOD' cannot be used because it requires iTunes version 7.4 or later. Go to www.blah blah to d/l v7.4..." So.... what now??? I'm stumped. And never-mind the "win2k is old and nobody supports it..." stuff... Microsoft still offers SP4 for d/l.
Why would Apple put a utility in a backward compat. program that is not backward compatible?????
In addition (and this may be over my head), but why does the website show the file @ 47.7MB, put once on my hd it shows 37.9MB?? I've d/l the file twice to be sure but have the same result.
Please forgive me - I am not shooting the messenger, I'm terribly confused. I am clearly missing something. Would someone PLEASE set me straight??? I'm a big boy - I can take it.

Enterprise Manager Console does not start on Win 2000 Pro

I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
Aruna

Marcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim

IWS Install Failed on Win 2000

Hello - we are still trying to recover our install of iWS on Win 2000. The
uninstall.exe hangs. Attemtps to reinstall hang. When we try to start the
iWS services in service manager they also hang.
We are installing from the Forte for Java partnership CD. This is iWS 6.0
Enterprise.
Please advise of the sequence of steps to erase all trace of the previous
installs (file directories, registry entries and anything else related) so
that we may reinstall iWS with a clean slate.
David Murphy
NetDirect

Hi,
Please ensure the following before you install.
- Have a fully qualified domainname which is mandatory. But for testing
purpose you can have DHCP running usually not recomended for production
environment.
- Installation platform for iWS 6.0 is Windows 2000 Server or Advanced
server recomended.
- If uninstallation hangs remove the entries from the services and remove
the associated folders and then go for reninstalling iWS 6.0
- If the problem still persists, the only way to get rid is to clean the
registry of Windows and make a reinstallation.
Regards
Raj
David Murphy wrote:
Hello - we are still trying to recover our install of iWS on Win 2000. The
uninstall.exe hangs. Attemtps to reinstall hang. When we try to start the
iWS services in service manager they also hang.
We are installing from the Forte for Java partnership CD. This is iWS 6.0
Enterprise.
Please advise of the sequence of steps to erase all trace of the previous
installs (file directories, registry entries and anything else related) so
that we may reinstall iWS with a clean slate.
David Murphy
NetDirect

Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!

Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

Flash-9 Beta and Win 2000

Hi
Flash-9 beta version is for Win-XP and above.
Is there any way to install Flash-9 Beta in Win 2000.
Regards

The Flash 9 BETA? Where/how did you obtain this? If you are
truly a BETA tester then you would be
asking on the BETA listserv - not the public forum. You must
have obtained this BETA illegally and
have now announced it publicly on Adobe's forum - I would not
have done such a thing to be honest -
it is illegal for you to have this copy of the flash tool if
you were not legally supposed to be
testing it.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
ANDR_ew wrote:
> I've installed Flash 9 beta and see no help files at all
in Flash Help (F1)
> section.
>
> Is it OK, or that's a bug?
>
> Is it possible to insert into F1 window a standart Flash
8 Help "books" ("How
> to use help", "Getting started with Flash", "Using
components" ans so on) and
> also a new AS 3.0 help section?
>
> Thanks!
>

Delete an itunes account from a Win 2000 computer

When trying to change the user id on an account I set up a second account. How do I delete this account? Computer is Win 2000
Thanks in advance

Does this help?
http://docs.info.apple.com/article.html?artnum=300161

Installing a JDBC-driver in the classpath in win 2000

Hi
I'm trying to make an aplication, that can access a remote DataBase, with the mm.mysql driver.
I have tryed to add the path to the libery where the jar file is in the classpath (in win 2000). But I can't get it to work from a dos-promt.

put it in your enviroment.
Control Panel -> System -> Enviroment.

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Problem installing Oracle 9i database entreprise edition on win 2000 server

Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Maya

hi,
try to install service pack for windows 2000 and try.

Help find the Driver CREATIVE LABS CT4810 chipset ES1373 for Win 2000. E-mail dirpt@mail.

Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].

AlexVP wrote:
Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].
You can start from here.
jutapa

Iplanet on win 2000

Similar Messages

Maybe you are looking for