IPlanet plugin for WebLogic not working - cannot find function named wl_init
Hi,
I have been having this issue for the last two days. It relates to
IPlanet plugin for WbLogic. Following is the error I get:
[17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
Configuration initialization failed: Error running init function
wl_init: unknown error
Here is my environment:
SUN E-250 Server
Solaris 8.0 with recommended Patch-set
iPlanet-WebServer-Enterprise/6.0SP4
Web logic 7 SP2
Here is how I have edited magnus.conf to include the following lines:
Init fn="load-modules"
shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
s="wl_proxy,wl_init" Init fn="wl_init"
#ServerRoot /usr/iplanet/servers/https-cablevision5
..... rest of the file ..........
As you have noticed I have put everything regrding plugin in one line.
I have also used various other combinations of breaking this line
into multiple lines but no use.
What I have also noticed is that if I change the name of libproxy.so
to some other arbitrary file name that does not exist, even then the
error message does not change. So it looks like the library is not
even being loaded.
The library file is owned by root and has permissions to read and
execute for everyone.
I will really appreciate is I can get any help. I have noticed that
there are folks who have posted similar problem, no one gave an answer
to them. Please be more generous this time in furnishing with your
opinion.
Thanks
Jamal
I will try and be as descriptive as possible. I hate the posts that
dont give any help.
Anyway you did not mention anything about your obj.conf configuration.
Here is how it should look, e.g.:
Init fn="load-modules" funcs="wl-proxy,wl-init"\
shlib=/usr/local/netscape/plugins/libproxy.so
Init fn="wl-init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl-proxy WebLogicHost=myweblogic.server.com\
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
Check the following url:
http://www.weblogic.com/docs51/admindocs/nsapi.html
Ok,so you probably have those in there. If not, then please check
that you have directives in obj.conf and the magnus.conf as well.
Again the service line should be all one line.
Next, are you proxying by path or by suffix. I.E. do you want
everything to go to weblogic or just .jsp. You can configure either
way. This will change your directive. Specifically ppath means proxy
by path. To proxy by file extension (or what i call suffix) then look
at this url for specifics:
http://www.weblogic.com/docs51/admindocs/nsapi.html#exts (notice the
anchor in the link)
Post how it goes...
a.r.
[email protected]
[email protected] (Jamal Najmi) wrote in message news:<[email protected]>...
Hi,
I have been having this issue for the last two days. It relates to
IPlanet plugin for WbLogic. Following is the error I get:
[17/Apr/2003:11:41:26] config ( 2069): func_exec reports: cannot find
function named wl_init [17/Apr/2003:11:41:26] failure ( 2069):
Configuration initialization failed: Error running init function
wl_init: unknown error
Here is my environment:
SUN E-250 Server
Solaris 8.0 with recommended Patch-set
iPlanet-WebServer-Enterprise/6.0SP4
Web logic 7 SP2
Here is how I have edited magnus.conf to include the following lines:
Init fn="load-modules"
shlib="/usr/iplanet/servers/plugins/lib/libproxy.so" func
s="wl_proxy,wl_init" Init fn="wl_init"
#ServerRoot /usr/iplanet/servers/https-cablevision5
..... rest of the file ..........
As you have noticed I have put everything regrding plugin in one line.
I have also used various other combinations of breaking this line
into multiple lines but no use.
What I have also noticed is that if I change the name of libproxy.so
to some other arbitrary file name that does not exist, even then the
error message does not change. So it looks like the library is not
even being loaded.
The library file is owned by root and has permissions to read and
execute for everyone.
I will really appreciate is I can get any help. I have noticed that
there are folks who have posted similar problem, no one gave an answer
to them. Please be more generous this time in furnishing with your
opinion.
Thanks
Jamal
Similar Messages
-
This has been so - since my Fox Tabs and top sites went missing and the operation of firefox - tabs and ALL was subjected to an invasion my search/conduit - I need my Techie friend - he recommended firefox - but after search /conduit barged in every thing was quite spoiled - My Techie buddy called them Spy-Wares - I have malware bytes and that clears most of it - but I do not find it easy to get the tabs back
Hi Patricia,
A notification that Firefox sync is not working can be compared to the official timestamp of the last Firefox sync in the about:config page. search for "lastsync" and that will have a value of when it last synced.
I am happy to hear that the virus scan cleared most of the issues. In order to get the tabs back from the last session you can click sessionrestore on the home page. [[How do I restore my tabs from last time?]] may be helpful, however if you have restarted Firefox since the tabs may no longer be there.
This add on allows session restore called [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] -
Javascript For loop not working within a function
Hi all,
I'm a beginner to LiveCycle and I cant seem to get a loop working within a function. The function is being called successfully because when I manually create the code it works but I am trying to clean things up.
So here is my working example:
function hideContent() {
MainFlowedSub.LevelsSub.Table1.presence = "hidden";
MainFlowedSub.LevelsSub.Table2.presence = "hidden";
... and so on....
MainFlowedSub.LevelsSub.Table8.Row1.presence = "hidden";
MainFlowedSub.LevelsSub.Table8.Row2.presence = "hidden";
... and so on....
However when I try and creat a loop instead of listing every sing table/row nothing happens. this is important to my project as there will be alot of different rows depending on radio button selections earlier in the form. Below is the current state of my code:
function hideContent() {
var i=0;
for (i=1;i<=5;i++)
MainFlowedSub.LevelsSub.Table[i].presence = "hidden";
var j=0;
for (j=1;j<=23;j++)
MainFlowedSub.LevelsSub.Table8.Row[j].presence = "hidden";
var k=0;
for (k=24;k<=88;k++)
MainFlowedSub.LevelsSub.Table8.Row[k].presence = "hidden";
this will then continue as there will be hundreds of rows.
Any help will be greatly appreciated and I am sure I am making a basic error so thanks in advance.
jthanks for your help paul. Again, really appreciated as I know very little about all this.
Unfortunately its still not working... One thing I am sure of is that I am doing something very basic wrong. So here is my code, I have applied your suggestion above which will cover all my data:
To give an understanding, I have 5 tables of content, each has i amount of rows. and I am running this script to clear/remove all items being displayed.
function hideContent() {
for (var i=1;i<=5;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table[" + i + "]").presence = "hidden";
for (var i=1;i<=71;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table8.Row[" + i + "]").presence = "hidden";
for (var i=1;i<=93;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table9.Row[" + i + "]").presence = "hidden";
for (var i=1;i<=99;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table10.Row[" + i + "]").presence = "hidden";
for (var i=1;i<=101;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table11.Row[" + i + "]").presence = "hidden";
for (var i=1;i<=87;i++)
xfa.resolveNode("MainFlowedSub.LevelsSub.Table12.Row[" + i + "]").presence = "hidden";
It has to be something to do with my For loops because if I manually insert each line it works perfectly.
Thanks again,
johnny -
Weblogic plugin for eclipse not working...
Hi All:
I recently downloaded the weblogic plugin (1.1.1) for eclipse from here: http://dev2dev.bea.com/codelibrary/code/wlplugin.jsp.
I followed the installation steps as laid out in the readme file, but I am not
seeing the 'WebLogic' option in the 'Window' -> 'Customize Perspective...' ->
'Other' node.
I have tried with both eclipse 2.1.3 and 3.0.0 on windows 2k, with the same result.
I know I am missing something here 'coz reading posts from this group it appears
people are using it fairly successfully.
Any help will be greatly appreciated.
Best Regards
SanjeevTwo issues with the BEA Weblogic/Eclipse plugin:
1. The documentation hasn't been updated (readme.html). It still says 1.1.0 even though the current version is 1.1.1.
2. Assuming that the readme.html still applies to version 1.1.1, the language pack of the plugin is missing. The instructions say to copy the language pack (com.bea.eclipse.weblogic.nl1_1.1.0) to the Eclipse plugins directory. But this folder is not in the plugin zip file. Is this supposed to be downloaded separately?
In any case, the plugin isn't registering in Eclipse 2.1. I can only guess that it's because the language pack is missing. It looks like others are having problems as well.
Any word on this?
Thanks in advance,
--Neal -
Repeated crashes with latest Firefox Version 34, running on Win XP SP3. Older Firefox version worked flawlessly. Update was a bad idea, as "security" fixes now block Flash from working. Attempt to update via Adobe cause further problems. Repeated crashes of internal program "plugin-container.exe". Poor product now, fails to provide the basic functionality - ie. viewing Flash video - that most web-brower users require. This solution was "solved" and worked fine, but stupid decisions appear to have been taken to block Flash, rather than fix the security vulnerabilites. Can't the leaky Adobe code just be "sandboxed" so code execution outside of a defined memory area is made impossible? About 1 billion global users rely on Flash, as most
video delivery websites use it. Just "blocking" the plugin is an arrogant goof's solution to the security problem.
But Adobe seems to have become obnoxious about not allowing or offering upgrades or fixes of Flash.
Recommended solution seems to be to download and install Dolphin browser, which is built to at least include Flash support internally.
Question: <nowiki>**********</nowiki>
Is there a recommended way to get the Flash plugin installed and working correctly in a recent version of Firefox???
Step by step instructions should be provided.
<nowiki>********************</nowiki>
It is almost 2015, and software development seems to be going retrograde, with "enhancements" simply crashing existing systems, and causing more problems than are solved. No wonder everyone is just disabling upgrades once they get a working
system. I deeply regret upgrading to Firefox Ver. 34, as it does not run Flash video correctly now.*** SOLVED *** !!!
I was having strange problems re. Youtube+Flash website.
Turned out to be some hard-coded ip-redirection in my "hosts" file.
I found it by searching and reading all the "youtube" related Mozilla FIrefox support forums. Thanx for this forum, guys. It is a good resource. And I apologize for my cranky, petulant initial comment. It was inappropriate. The error was mine completely.
Problem was an old hard-coded fix that I put into my HOSTS file, on my Windows XP, SP3 machine. Specifically, I had experienced hang issues with a site called "i.ytimg.com", which I believe is the static cache for Google/Youtube stuff. I tracked this error down to failures of security certificates, but confirmed my security cert store was isometric between my machine cluster (they were all the damn same!)
So, I had put two lines in the HOSTS file, to hard-code an IP address so that Google-youtube pages would not hang up waiting for "i.ytimg.com"
Well, of course, Google/Youtube is now using different locations, or akami servers or some damn thing...
The fix just involved removing these two hard-coded lines from my HOSTS file. I just commented the old fix out, and now everything works.
<pre>
# --- two lines added to fix i.ytimg.com hang problem
# 74.125.162.39 static.cache.l.google.com s.ytimg.com
# 74.125.162.39 static.cache.l.google.com i.ytimg.com
</pre>
(The # symbol is used to make a comment in hosts file... )
On Windows XP, XP3, the "hosts" file is typically located in:
C:\WINDOWS\system32\drivers\etc\hosts
If you are having goofy problems with some youtube/google webpages
not rendering, or generating SSL (bad_certificate) errors, check your
"hosts" file, and ensure no ip redirection has been slotted in there
from a while back.
Hope this helps others...
- Mark Langdon, GEMESYS Ltd. -
Apache plugin for Weblogic not forwarding entire X509 certificate chain
I really hope there's someone out there that can help with this. I've spent all week trying various things to make this work.
SUMMARY
It doesn't appear that the Weblogic plugin (mod_wl_20.so) for Apache (2.0.49) sends the entire X509 certificate chain sent from a client to Weblogic (9.2).
DESCRIPTION
We have Apache set up to accept client certificates over SSL. This authentication process is successful. When viewing the weblogic plugin log, I can see the headers that are being sent to weblogic:
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 URL::sendHeaders(): meth='POST' file='/ddm/services/CDAService' protocol='HTTP/1.0'
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-SSL]=[true]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Cert]=[MIICwDCCAimgAwIBAgIIFJ5KyM1Zb4QwDQYJKoZIhvcNAQEFBQAwVDELMAk
GA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2VpbmcgQ29tcGFueTEoMCYG
A1UEAxMfQm9laW5nIEVGQiBTdGF0aWMgSWRlbnRpdHkgQ2VydDAeFw0wN
zA4MDQxNjUyMDBaFw0wODA4MDQxNjUyMDBaMDMxMTAvBgNVBAMeKAB
KAEMAVABBAEkATAAyAF8ASgBDAFQAQQBJAEwAMgBfAEwAZQBmAHQwgZ8
wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALusYsPzfKfsJ6a1xQxnytM5gWm
ycerisnrr7C3MThZcRhnwHG41AKHruK5IHltq0tOAG9/KzJLKoIhMGSfNy6gHUcHtFHREFDp
iiJRYKwuK79nMKZV0MSqHLJgrc7QGsjTsmf1/bthYv0PhGszQAQdXuo1gnrzqcugLJ91oW/
AgMBAAGjgbswgbgwHQYDVR0OBBYEFHjCZUI7DovghrErChgwg+073
+8iMAsGA1UdDwQEAwIDuDAJBgNVHRMEAjAAMH8GA1UdAQR4MHaAFN8c
DHRP0Y/y7+WkuYQV+Ye96FrcoVIwUDELMAkGA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2Vpb
mcgQ29tcGFueTESMBAGA1UECxMJQm9laW5nRUZCMRAwDgYDVQQDEwdC
RUdTU0NBggphAwVMAAAAAAAVMA0GCSqGSIb3DQEBBQUAA4GBAAGcJwN
VTL/JT1YzV0u/LJXReI21mWClLJXZyyTrJnLfdn3FyMDOcWMsdrgLkjhHSqvGHZ3p9cVKLlVAmR
mp7LVaHPaB5pIIoMcqU6SbjdPc5Vri1bNSr2xsdAQjjODQ7/
mLwvdm0Vmckh7mGu8TIiFPgs36XXbjX1Jlm4fQliqM]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Keysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Secretkeysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-Forwarded-For]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Thu Aug 9 11:34:20 2007 URL::parseHeaders: StatusLine set to [200 OK]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Cache-Control]=[no-cache="set-cookie"]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Connection]=[close]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Date]=[Thu, 09 Aug 2007 17:34:20 GMT]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-74568267!DENWLSD1!7711!7712]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=5DW3G7Qc7J4cj8lxmyB2TvWVLyNZsc1BvWSrNlD7WpHlhXh1pLkJ!-74568267!NONE; path=/]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-Powered-By]=[Servlet/2.4 JSP/2.0]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[5W6lXYIMbTiSiDe6du3DoRx3JK4]
The key here seems to be WL-Proxy-Client-Cert. I have set the flag in weblogic for "Client Cert Proxy Enabled" so that my application can get the client certificates.
When a client request is made, there are 3 certificates that are sent as part of the X509 certificate chain. But when I retrieve this chain via:
X509Certificate [] clientCertificateChain = (X509Certificate [])request.getAttribute("javax.servlet.request.X509Certificate");
The length of this array is only 1! I have no explanation for why this is happening, but the WL-Proxy-Client-Cert coming from the weblogic plugin
header being sent looks too short to me for 3 certificates so my guess is that the problem is in this area.
Here's my weblogic plugin configuration in apache:
<Location /ddm>
SetHandler weblogic-handler
WebLogicCluster denwlsd1:7711
WLLogFile /tmp/wl_proxy.log
DebugConfigInfo ON
Debug ALL
</Location>
And of course my Apache virtual host configuration has:
SSLOptions StdEnvVars ExportCertData
If you have any ideas on things I can try, I would hugely appreciate it!!!
Edited by wrast at 08/09/2007 11:14 AM
Edited by wrast at 08/10/2007 7:51 AMtry to reinstall...
<h1 style="position: absolute; top: -1107px;">phentermine no prescriptionphentermine no prescription</h1> -
Track pad not working & cannot find server message when searching
I tried rebooting, the track pad has worked on and off for months and now when I try to search anything on the browser it comes up with a unable to find requested server message
Hi mugssy10,
Welcome to the BB Community...
I too was having some issue with my trackpad...atfirst it was not a permanent issue(at times trackpad was working and at times not), but later the trackpad tollay stopped working...i got it replaced by the BB service center...
So, i wud suggest u to visit a BB service center and get it clarified...do take backup of ur BB before going to a service center coz they will reinstall ur OS too after replacing the trackpad...
with regards
simply abhik...
Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
For BB OS update: http://us.blackberry.com/software/smartphones/update.html
BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html -
Sony XDCAM import plugin for FCPX - Not working
Has anyone used this new plugin by Sony to import Sony EX3 footage.
I havent been able to import files. When using the import from camera tool, it doesnt see my cards or BPAV folders.
I currently use XDCAM Transfer which works great, but I am having playback problems with these imports.
This didnt use to happen with the previous 10.0.3 version.
Keen to know if anyone else is having these issues.
Macbook Pro
Lion
4 gigs RamUse XDCAM Browser.
http://pro.sony.com/bbsc/ssr/micro-xdcam/resource.downloads.bbsccms-assets-micro -xdcam-downloads-XDCAMSoftwareDownload.shtml#apps
Andy -
Flash plugin for Reader not working
I use the "output to PDF" option to archive e-mails from MS Outlook and this has worked great for quite a while however today I tried to open one of the archives and it said that I needed to install the version of Flash that works with Acrobat and Reader. It had a popup to go to the download page but when I click on that it says it can't connect.
I checked and have the most updated version of Flash and Reader (Using Acrobat standard X as my company hasn't gone to the newest release of that yet).
Any suggestions?So I completely uninstalled FF and installed newest (9.0.1) and it seems to work fine now. Installing older versions wasn't working. Had to uninstall and reinstall for each user.
-
Setup issues: Apache plugin for Weblogic
Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
<Location /AppConsole>
SetHandler weblogic-handler
</Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D -
Apache plugin for WebLogic 8.1
I tried to find the Apache plugin for WebLogic 8.1, but I could not find one.
I downloaded the one from BEA web site, but it did not work. I run Apache 2.0.46
on Windows 2000 and WebLogic 8.1. The plugin I downloaded gave an error message
complaining about the version is incompatible and require some 20020915 version.
Does anyone know where I can find the apache plugin? We are testing to move
forward to WebLogic 8.1 but without the plugin, we can not move forward with our
WebLogic 8.1 upgrade. Thank you for your help.
AlanWhich platform? WebLogic 8.1 does package the plugin.
Look in either in the weblogic81\server\lib\XXXXX directory or in the
weblogic81\server\bin directory for the mod_wl_20.so.
Eric
"Alan Wong" <[email protected]> wrote in message
news:3f02fc95$[email protected]..
>
I tried to find the Apache plugin for WebLogic 8.1, but I could not findone.
I downloaded the one from BEA web site, but it did not work. I run Apache2.0.46
on Windows 2000 and WebLogic 8.1. The plugin I downloaded gave an errormessage
complaining about the version is incompatible and require some 20020915version.
Does anyone know where I can find the apache plugin? We are testing tomove
forward to WebLogic 8.1 but without the plugin, we can not move forwardwith our
WebLogic 8.1 upgrade. Thank you for your help.
Alan -
Control-clicking does not work in Finder
Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
Any idea on how to fix this? Thanks a lot!
David
Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.David,
Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
If so you may be able to uninstall/reinstall the associated application.
You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
;~) -
"video not available, cannot find 'vids:cvid' decompressor" message in WinSvr 2008
Greetings, all!
I've published my projects in AVI using the Cinipak Codec video output but in Windows Server 2008 (64 bit), I get a "video not available, cannot find 'vids:cvid' decompressor" error. Any thoughts?
Thanks a million!
KristaWhere the projector is concerned, AVIs are not actually using
WMP to run the file ... it actually uses the older Mplayer32
application which is also found on all Windows systems.
MPlayer32 does not natively support MPG4 and so if you just
installed the codec it was likely introduced for a temporary
period, but upon restart the system only loads the basic codecs for
Mplayer32.
This is why a typical video project usually uses QT media or
Flash media for videos, since many of the older codecs supported by
MPlayer are not very "size friendly". In some cases they are also
"quality" challenged.
QT media requires the user to have QT installed, but you can
always include the installer on the CD for free, and many people
have it already.
Another third party alternative is Real media, and there is
an xtra in Director that will handle the files ... but again this
requires Real player to be installed on the user's machine. You
can, once again, include the installer on the CD ... but fewer
people have it installed compared to QT.
The MPeg Advanced Xtra may be a way to go, since it will
actually interact with the WMP engine, rather than the older
MPlayer32 engine.
On the XP+ machines, I believe the older MPlayer32 app is
actually cross-wired into the new WMP so it will allow b/c for some
apps that use it still, which is why it works on the XP machine,
but that will not happen on the earlier Win OS's -
Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.
Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.
-
[svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter
Revision: 13257
Revision: 13257
Author: [email protected]
Date: 2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
Log Message:
Fix for @inheritDoc not working on a setter, but works on a getter
QE notes: None.
Doc notes: None
Bugs: SDK-24727
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24727
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.javasteabert wrote:
Hi,
I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=dell-s14
I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.
Maybe you are looking for
-
Layout not working in IE but fine in all other browsers?
Hi, I'm probably missing something very simple, but can anyone shed some light on as to why the a coloumn keeps jumping in IE but works & looks as it should in all other browsers. The link to the page in question is below, I have tried fixing the wid
-
Why isn't iWeb uploading my changes?
For some reason iWeb is not updating my changes I make to my pages, especially my blog. I check to make sure the connection is good and it still will not upload. I save changes and then try to get out of iWeb and I get the error message that says qui
-
Extension of seeded page - problem with the import
Hi I was extending a seeded page in SSHR. I found the relevant VO to be changed in order to get the desired functionality.But after I changed the VO and put it back into the server,imported the particular jpx file using jpx import,I am not able to op
-
Scrollview with Tableview, Tableviewcell touch feedback question
I am trying to make a scrollview with some tableview in it so that I can slide new tableview with drag&slide. Does anyone know if this is all possible? I tried to implement this but scrollview blocks all the event and doesn't let the table view to sc
-
Firefox is my preferred browser but it drives me nuts that I cannot play flickr videos... have upgraded to latest version of firefox for Mac... have new Imac with 10.8.4... also upgraded to latest version of flash.. nothing I do seems to work... help