IPlanet Web Server crashes when uploading a file of size 15 MB

Hi
Setup is iPlanet Web Server 6.0 with iPlanet App Server 6.5. A servlet is used to upload files using multipart form data. The web server restarts itself when tried to upload a huge file (approx 15 MB). The error log says
Catastrophe (600) Web server crashed.
Any help is appreciated
Thanks in advance
Rajesh

yeah its working fine. Thank you very much..
But it would be better if we provide the chunklength rather than using a zero to upload the file fastly.

Similar Messages

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

IPlanet web server crash 6.0SP5

Hi all,
I am getting the following errors in iPlanet web server
Platform details: Sun solaris, SPARC, 8, iPlanet 6.0 SP5
Pls let me know how to fix this porblem
Error details
Error 1:
catastrophe ( 7455): Server crash detected (signal SIGSEGV)
info ( 7455): Crash occurred in NSAPI SAF validate_session_policy
info ( 7455): Crash occurred in function xmlFreeNodeList from module /opt/SUNWam/lib/libxml2.so.2
failure ( 7454): Child process admin thread is shutting down
Error 2:
catastrophe ( 529): Server crash detected (signal SIGBUS)
info ( 529): Crash occurred in NSAPI SAF validate_session_policy
info ( 529): Crash occurred in function xmlFreeProp from module /opt/SUNWam/lib/libxml2.so.2
failure ( 522): Child process admin thread is shutting down
Error 3:
catastrophe (13576): Server crash detected (signal SIGILL)
info (13576): Crash occurred in NSAPI SAF NSServletService
failure (29922): Child process admin thread is shutting down
Error 4:
catastrophe (11097): Server crash detected (signal SIGSEGV)
info (11097): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /app/iws605/bin/https/lib/libns-httpd40.so
Error 5
catastrophe (27403): Server crash detected (signal SIGSEGV)
info (27403): Crash occurred in NSAPI SAF NSServletService
info (27403): Crash occurred in function memset from module /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1

Hi
I am also getting the following error.
Jawwad ,Can you please let me know did your problem got solved , what was the solution
Any help will be highly appreciated
[26/Apr/2004:09:09:04] failure ( 5958): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.la
ng.OutOfMemoryError
[26/Apr/2004:09:09:07] failure ( 5958): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.la
ng.OutOfMemoryError
[26/Apr/2004:09:09:14] catastrophe ( 5958): Server crash detected (signal SIGSEGV)
[26/Apr/2004:09:09:14] info ( 5958): Crash occurred in function __0fLPollManagerNAddConnectionR6KConnectionUi from module /opt/app/bstwkwww/
iplanet60/bin/https/lib/libns-httpd40.so
Thanks and regards
Shikhar

Firefox crashes when uploading/downloading files from/to 'desktop folder'

Hello
I'm hoping, that you can help me!
I'm using Firefox 28.0 on MacBook Pro Mavericks 10.9.2
Firefox crashes/freezes when I try to upload/download files from/to my 'desktop folder'.
I't only happens, when I use this folder. Download to 'download folder' or any other folder works fine.
Download to 'desktop folder' when using Safari also works fine.
I't only happens when desktop and firefox tries to communicate.
It's very annoying when I accidentally forget, that the bugs is there, and I have to force quit and start all over again. And sometimes I don't even have a choice, because 'desktop' randomly opens as default folder, when I try to upload things.
Thank you so much in advance!
Kind regards Elizabeth

Hi ESwan,
I am not a Mac user so not the best person to attempt to assist but here goes.
I am presuming that info such as
PID: 1695 Event: cpu usage (microstackshots only)
Relate to the Mac OS X crash & event logging and reporting.
What we need are the ones that Firefox itself generates and submits for processing by Mozilla Firefox
* See [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes#w_get-help-fixing-this-crash]]'''#w_get-help-fixing-this-crash'''
From what you say the crashes occur after a certain action and I am hoping that you will be able to use the easy method as in the article linked above. Navigate to about:crashes by keying ''about:crashes'' into the address bar. You are loolking for the ones starting wth ''bp-'' Paste two or three of those into your next post. Include the bp- part but not any link information before that. After they are pasted into the forum the forum software changed them to be links.

Kernel crash when uploading FTP files

Just let you know, that I got Kernel crash, when I was uploading files using FTP Transmit.
I guess time machine make it crash.
I unplugged the HDD and all is ok.
This means no FTP, no Aperture............... and so many other things

Thanks for this, I just wrote a reply on the other thread too. I'm very grateful for that.
In my case there was no grey screen, just the sudden freeze (no beachball, nothing) -- the computer is working fine one moment and then instantly moves to a state where the mouse pointer doesn't move, keyboard doesn't do anthing, flashing cursor in the clock stops, and the only thing to resolve this is the power button. I don't know the technical term for this -- somebody told me 'hard crash' might be the term.
I'm wondering how to avoid this happening. It actually happens MORE frequently than the ominous grey screen saying 'You need to restart'. It's more common on the laptop than on the G5, though.
Thanks again.
PowerMac G5 Dual 1.8GHz (1 GB RAM), PowerBook G4 12" 1.33GHz (768 MB RAM) Mac OS X (10.4.5)

Oracle iPlanet Web Server 7 - Configuration Failed

Hi There,
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
Jul 5, 2011 4:29:16 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
installJDK
SEVERE: JDK copy failed
Jul 5, 2011 4:52:36 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:55:00 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:57:07 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
INFO: Invoking the server configuration script
Jul 5, 2011 4:57:08 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
WARNING: The backend configurator failed
Jul 5, 2011 5:15:10 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:15:46 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:16:43 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:21:37 AM com.sun.web.installer.web.actions.PostInstall_core
install
What could be the problem?

[root@local java]$ ls
default jdk1.6.0_02 jdk1.6.0_20 jdk1.6.0_26 latest
[root@local java]# ./setup --javahome /usr/java/jdk1.6.0_26
Product : Oracle iPlanet Web Server
Location : /opt/oracle/webserver7
Disk Space : 231.37 MB
Administration Command Line Interface
Server Core
Start Administration Server [yes/no] [yes] {"<" goes back, "!" exits}:
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}? 1
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
What would you like to do [2] {"!" exits}?
I can not see the option.

Error: java.lang.OutOfMemoryError when uploading CSV files to web server

Hi experts,
I have made a JSP page from which clients load csv files to web server. I am using Tomca 4.1 as my web server and JDK 1.3.1_09.
The system works fine when uploadiing small csv files, but it crashes when uploading large CSV files.
It gives me the following error:
java.lang.OutOfMemoryError
     <<no stack trace available>>
This is the code that I used to load files....
<%
String saveFile = "";
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
     DataInputStream in = new DataInputStream(request.getInputStream());
     int formDataLength = request.getContentLength();
     byte dataBytes[] = new byte[formDataLength];
     int byteRead = 0;
     int totalBytesRead = 0;
     while (totalBytesRead < formDataLength)
          byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
          totalBytesRead += byteRead;
     String file = new String(dataBytes);
     saveFile = file.substring(file.indexOf("filename=\"") + 10);
     saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
     saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
     int lastIndex = contentType.lastIndexOf("=");
     String boundary = contentType.substring(lastIndex + 1,contentType.length());
     int pos;
     pos = file.indexOf("filename=\"");
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     int boundaryLocation = file.indexOf(boundary, pos) - 4;
     int startPos = ((file.substring(0, pos)).getBytes()).length;
     int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
     String folder = "f:/Program Files/Apache Group/Tomcat 4.1/webapps/broadcast/file/";
     //String folder = "10.28.12.58/bulksms/";
     FileOutputStream fileOut = new FileOutputStream(folder + saveFile);
     //out.print("Saved here: " + saveFile);
     //fileOut.write(dataBytes);
     fileOut.write(dataBytes, startPos, (endPos - startPos));
     fileOut.flush();
     fileOut.close();
     out.println("File loaded successfully");
//f:/Program Files/Apache Group/Tomcat 4.1/webapps/sms/file/
%>
Please can anyone help me solve this problem for me...
Thanx...
Deepak

I know it may be hard to throw away all this code, but consider using the jakarta fileupload component.
I think it would simplify your code down to
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
    FileItem item = (FileItem) iter.next();
    if (item.isFormField()) {
        processFormField(item);
    } else {
        // item is a file. write it
        File saveFolder = application.getRealPath("/file");
        File uploadedFile = new File(saveFolder, item.getName());
        item.write(uploadedFile);
}Most of this code was hijacked from http://jakarta.apache.org/commons/fileupload/using.html
Check it out. It will solve your memory problem by writing the file to disk temporarily if necessary.
Cheers,
evnafets

My firefox crashed when upload file on our web based application. This happen on two PC, even during firefox safe mode the problem still exist. But the problem

Dear All,
My firefox (version 23 on win 7) crashed when upload file on our internal web based application. This happen on two PC, even in firefox safe mode the problem still exist. So, my first conclusion the problem nothing to do with extension. here the crash ID https://crash-stats.mozilla.com/report/index/81220865-36c0-4e10-a484-6d27e2131023 and https://crash-stats.mozilla.com/report/index/86d2b779-9730-4d2c-b276-a86d42131023. I wonder if this happen because jquery modul in our web based application. But when I tried on my laptop, the problem dissapear. I tried to replicate same situation on different server, I mean I put the exact same application source to other server, never meet the same problem. Thus, I suspect may be it related to antivirus that installed in our network which is kaspersky. I am googling, never meet the clue.
If you meet the same problem, please help me.
I am so sorry for my poor english.
Him Him

The crashes are a problem with the winhadnt.dll file (OCular Agent from TEC Solutions Limited) as you can see in the crash reports.
*http://www.freefixer.com/library/file/winhadnt.dll-52397/

Help me Deploy WAR file in SUN iPlanet Web Server 6.1 SP7 using JDK1.6 & JS

Hi All,
Can any one help me on this.
I'm using
JDK1.6
JSF1.2
JSTL1.1
Hibernate3.2.5
ANT1.7
JUnit
HTML
Oracle10g
Trying to deploy this war file in SUN iPlanet Web Server 6.1 SP7. Can I use JDK1.6 & JSF1.2 in web server6.1

What is the exact version of Web Server you are using? Should be in the error logs or try $start -version
It would be faster if you can capture and cut and paste the data that is sent between firefox and Web Server in both the cases using /usr/sfw/bin/ssltap (http://www.mozilla.org/projects/security/pki/nss/tools/ssltap.html) or ethereal when you try to view that shtml file. We can see if its any different in both cases and try it from there.
Also verify the steps given in http://docs.sun.com/source/817-1832-10/pgshtml.html
mime.types should have :
type=magnus-internal/parsed-html exts=shtml
obj.conf should have :
Service fn="shtml_send" type="magnus-internal/parsed-html" method="(GET|HEAD)"
When you activate parsing, magnus.conf should have :
Init funcs="shtml_init,shtml_send" shlib="install_dir/bin/https/bin/Shtml.dll" NativeThreads="no" fn="load-modules"
Shtml.dll (or libShtml.so on UNIX), is located in install_dir/bin/https/bin for Windows, and install_dir/bin/https/lib for UNIX.

Deploy WAR file in SUN iPlanet Web Server 6.1 SP7 using JDK1.6 & JSF1.2

Hi All,
Can any one help me on this.
I'm using
JDK1.6
JSF1.2
JSTL1.1
Hibernate3.2.5
ANT1.7
JUnit
HTML
Oracle10g
Trying to deploy this war file in SUN iPlanet Web Server 6.1 SP7. Can I use JDK1.6 & JSF1.2 in web server6.1

What is the exact version of Web Server you are using? Should be in the error logs or try $start -version
It would be faster if you can capture and cut and paste the data that is sent between firefox and Web Server in both the cases using /usr/sfw/bin/ssltap (http://www.mozilla.org/projects/security/pki/nss/tools/ssltap.html) or ethereal when you try to view that shtml file. We can see if its any different in both cases and try it from there.
Also verify the steps given in http://docs.sun.com/source/817-1832-10/pgshtml.html
mime.types should have :
type=magnus-internal/parsed-html exts=shtml
obj.conf should have :
Service fn="shtml_send" type="magnus-internal/parsed-html" method="(GET|HEAD)"
When you activate parsing, magnus.conf should have :
Init funcs="shtml_init,shtml_send" shlib="install_dir/bin/https/bin/Shtml.dll" NativeThreads="no" fn="load-modules"
Shtml.dll (or libShtml.so on UNIX), is located in install_dir/bin/https/bin for Windows, and install_dir/bin/https/lib for UNIX.

Deploying war files on iplanet web server 6.0

Hello All,
I tried to deploy an war file on iplanet web server 6.0 using both command line wdeploy and iplanet webserver browser based admin tool. Both the times it did say successfully deployed. I checked the WEB-INF files and it does contain all class files..But the problem is when I try to post a form to one of the class files the error log says as if it cannot find the class file.(I tried the sample app HelloWorld supplied by vendor)
=========
05/Mar/2002:13:19:14] config (13777): for host xx.xx.xx.xx trying to POST /samples/helloworld/GreeterServlet, handle-processed reports: The request method is not applicable to this requested resource.
=================
any help in this regards is appreciated
Thanks
sudhir

Hello,
I got few steps to deploy the WAR file, if you followed the same steps and got the error then ignore this else try with this steps.
a) Set your environment variable IWS_SERVER_HOME to your server_root directory.
b) Add the server_root/bin/https/httpsadmin/bin directory to your classpath.
c) Configure your virtual server for web applications.
From the Server Manager page, select the VirtualServerClass tab, select a Class, and click the Manage button.
Select a Virtual Server and go to the Java Web Apps Settings page for that virtual server. Make sure that the virtual server has Web Apps State turned On, and web-apps.xml is the name of Web Apps File.
To extract the sample WAR file HelloWorld.war in server_root/plugins/servlets/examples/web-apps/HelloWorld, use the wdeploy command as follows:
wdeploy deploy -u /hello -i server.iplanet.com -v testvs -d
/iws60/https-server.mydomain.com/testvs/web-apps/hello
/iws60/plugins/servlets/examples/web-apps/HelloWorld/HelloWorld.war
The syntax for the command is as follows:
wdeploy deploy -u uri_path -i instance -v vs_id [-d directory] war_file
uri_path Specify the URI prefix (a path to access the web application from the browser).
instance Specify the server instance name. (Note: Do not include "https" in the front.)
vs_id Specify the Virtual Server name as it appears on the Manage Virtual Servers page.
directory Specify a directory to extract WAR files. If this directory doesn't exist already, it will be created for you now.
war_file Specify the name of the WAR file.
If the WAR file is extracted successfully, the message "web application deploy successful" appears at the command line.
For verification, go to the /iws60/https-server.iplanet.com/testvs/web-apps/hello directory. It should have the following contents:
colors
index.jsp
META-INF
WEB-INF/
web.xml
/classes/
HelloWorldServlet.class
HelloWorldServlet.java
SnoopServlet.class
SnoopServlet.java
In the server_instance/config directory, the web-apps.xml file should have the following entry:
<vs>
<web-app uri="/hello"
dir="/iws60/https-server.iplanet.com/testvs/web-apps/hello"/>
</vs>
Restart the server instance from the command line or go to the admin GUI and apply configuration changes to the server instance.
Now when you access the webserver instance in your browser, the Error log of that server instance will record successful initialization of the web application environment(web-apps.xml) for the virtual server(vs name). You can access the web application from a browser as follows:
http://server.Mydomain.com:80/hello/index.jsp
or:
http://server.Mydomain.com/hello/
The syntax is as follows:
http://vs_urlhost[:vs_port]/uri_path/[index_page]
Thanks
Selva

IPlanet web server auto restart when user login or logout the NT server

Configuration
- NT Server 4.0 SP6a
- iPlanet Web Server 6.0 SP4
- JDK 1.3.1_03
- NT audit turned on for the file <iPlanet WS 60 instance home>/config/password.conf
We encounter a problem that when a user login / logout NT machine, the iplanet web server would be restart automatically.
Could somebody advise why this happen and how it can be solved?
There is a box called "Allow service to interact with desktop" in the service startup menu. What is it means and did it related to the problem?

I think you are running into this:
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsunone%2F8322&zone_32=-Xrs%2A%20
Thanks
Manish

Iplanet web server 7 -how to get more information when a certificate is untrusted ?

Hi
When a client tries to access to iplanet 7.0.15, we only get a line in the errors log with a simple error., for instance SSL_ERROR_UNKOWN_CA_ALERT...
We would like to know if it is possible to configure iplanet to get more information about this request..
iPLANET is receiving requests from a lot of clients and sometime it is difficult to identify the source of a error without more information..
We would like have similar information that access log shows when certificate is valid
We get the same information with log-level = info or finest..
Thanks
Uge

Hi Uge,
Setting the iPlanet Web Server log level to 'finest' will give you more information, but it is very verbose, and you still might not get the information you are looking for. You might want to try 'fine' or 'finer' first to see if either of those gives you the information you need.
With regards to the above error, SSL_ERROR_UNKOWN_CA_ALERT, this means that the client presented a certificate in the SSL handshake that was signed by a CA that the Web Server doesn't have in it's certificate database. In order to ensure the Web Server is kept upto date with the latest set of public CA certificates, I would recommend you upgrade to the latest version.
If you know that the certificates the clients are using are from an internal CA, you need to ensure the Root CA Certificate from that internal CA is installed in the Web Servers certificate database as a trusted certificate.
regards
Tracey

Connection timeout when using iPlanet web-server uses Weblogic 6.1 proxy server to proxy requests to an HTTP server

Hi all,
My configuration is as follows: I have an iPlanet web-server that uses a WebLogic
6.1 (sp1) server to proxy requests to another HTTP server. The HTTP request runs
for 120 seconds. This causes Weblogic to timeout after a while. The error I get
is as follows:
<Aug 25, 2003 3:37:09 PM GMT+00:00> <Warning> <HttpClient> <Couldn't open connection
java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:127)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:194)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:254)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:117)
at weblogic.net.http.HttpClient.New(HttpClient.java:149)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:109)
at com.db.gmr.dcm.DebtIssueServlet.getVectorFromConnection(DebtIssueServle
t.java:285)
at com.db.gmr.dcm.IssuesUSThread.run(IssuesUSThread.java:29)
>
I get the same error when I added the following plug-in configuration parameters
(in obj.conf):
ConnectTimeoutSecs="170" ConnectRetrySecs="170".
What do I need to do to extend this timeout? Any help you can provide will be
greatly appreciated..
Thanks
Manish

Hi all,
My configuration is as follows: I have an iPlanet web-server that uses a WebLogic
6.1 (sp1) server to proxy requests to another HTTP server. The HTTP request runs
for 120 seconds. This causes Weblogic to timeout after a while. The error I get
is as follows:
<Aug 25, 2003 3:37:09 PM GMT+00:00> <Warning> <HttpClient> <Couldn't open connection
java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:127)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:194)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:254)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:117)
at weblogic.net.http.HttpClient.New(HttpClient.java:149)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:109)
at com.db.gmr.dcm.DebtIssueServlet.getVectorFromConnection(DebtIssueServle
t.java:285)
at com.db.gmr.dcm.IssuesUSThread.run(IssuesUSThread.java:29)
>
I get the same error when I added the following plug-in configuration parameters
(in obj.conf):
ConnectTimeoutSecs="170" ConnectRetrySecs="170".
What do I need to do to extend this timeout? Any help you can provide will be
greatly appreciated..
Thanks
Manish

I have perl scripts that I want to be able to run with my iplanet web server 6.0. How can I make it work in Windows NT? (Because I have no problem when I use it with Linux).

Hi Melanie,
In order to run a PERL script under Windows NT the iPlanet Web Server needs to know where to find the PERL interpreter.
follow these steps :
1) Make sure Windows NT knows what a .pl file is. In file Manager click on file and choose associate from the menu. Check the "files with extension" drop-down list for pl - if it exists verify that it is pathed to your perl.exe. If it is not already on the list click the "New Type" button. In the Filetype box put pl. Choose open from the Action drop-down list. In the Command box specify the full path to your perl.exe interpreter (Make sure to use short filenames, rather than long filenames.) Click the OK button. Then click the Close button in the main Associate dialog box. Double click a .pl file to test - it should automatically launch the PERL interpreter and feed it your .pl file.
2) Create a directory to contain your .pl scripts.
~server_root\shell-cgi is a good choice.
or \cgi-bin\
NOTE: Make very sure that this directory is NOT part of the document root, it should have it's own directory (preferably at the same level of the docroot).
3) In the Admin Server select Programs.
4) Choose CGI directory (normally) or WinCGI directory or ShellCGI Directory depending on ur choice from the Programs menu.
5) Put the URL Prefix you would like to map to your Shell-CGI directory into the URL Prefix field.
6) Put the full path to your Shell-CGI directory in the Shell CGI directory field.
7) Click OK.
8) The save and apply changes page will display your changes and give you the opportunity to verify them. If they are correct click the Save and Apply button. If not Click the Undo button and go back to step 4.
(9)You can then call your .pl scripts directly by referencing the directory mapping that you have just created. For example:
http://my.server.whatever/shell-cgi/ myscript.pl
this should work now.
If not Pls Mail me.
regards
T.Raghulan
[email protected]

IPlanet Web Server crashes when uploading a file of size 15 MB

Similar Messages

Maybe you are looking for