Iplog some help if you please ...

So I installed iplog got a basic conf set up and start it but something strange came by
Apr 2 05:46:04 localhost iplog[1586]: iplog started.
Apr 2 05:46:04 localhost iplog[1587]: Warning: unable to open ppp0
Here is my basic conf cat /etc/iplog.conf
Interface ppp0
promisc false
user nobody
group nobody
set log_ip true
I tested using promisc true and stuff and nothing good happens but if I use The loopback device lo iplog works just fine …… but I do not want to use lo I want to use the Internet device ppp0
If some one can point me out to some sort of … something I who'd appreciate

Maybe permissions on ppp0 device do not let to access ppp0?

Similar Messages

TS1702 Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me

That's a peculiar one to get in the context of a QuickTime uninstall.
Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?)

Need some help and guidance please!

Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?

Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-)

[HELP] Could you please give me a solution to BW reports of ECC purchasing

Hey, guys,
I want to do some customized spend analysis reports of MM purchasing.The purchasing data will be retrived from 2 source systems ( 1 is ECC 6.0 and the other is R/3 4.6c ) And these reports should be viewed by "commodity" , however, there is no commodity code maintained in material master data.
So my solution is :
1. to find a idle field in material master data to maintain this "commodity", this could be flexible for me, however, it's not easy to push other guys to do this. ( I don't have the authority to do the master data maintainence.)
2. to maintain a mapping table in BW, and material and commodity(also description)should be the fields of this table. However, I don't think it's a good way. Because, this table is not easy to maintain and synchronized.
<b> Could you please give me any suggestion for this situation. Is there any good solution to my question? </b>
Thanks a lot

first things first .. if they want a report by commodity .. ask them to maintain it ..
1. if you can make the guys maintain commodity in a idle field, you can as well make them enhance the material master and add a new field ... its upto the flexibility u have
2. i dont think thats a bad idea.. but i would prefer somebody maintain the same mapping table in source system and ask them to RFC it to BI .. so that u can use it as a look up table ...

When i try to re download apps for macs, it saws sign in for purchase history then nothing happens. i could really use some help. thank you

when i try to re download apps for macs, it saws sign in for purchase history then nothing happens. i could really use some help. thank you

Hi,
You've come across a MAS bug.
Install the v10.6.7 combo update here.
Restart your Mac after the update is installed.
Instructions for re downloading apps here.
Carolyn

HT1414 what can i do when 2009 error can when i am train to restore my iphone i need some help thank you....

i need some help restore my iphone than you the erro mesaje is (2009) it say the iphone could not be restored. an unknown error occurred (2009).

http://support.apple.com/kb/TS3694#error2009
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore.
If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore.
If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above.
If the issue persists, it may be related to conflicting security software.

1st gen imac,dual core no power? Some helpful advice requested please....

Please pardon my grammar, sentence syntax and perhaps spelling!
Yes I have read all the gloom and doom posts regarding logic boards etc, what are the chances it might be a power supply issue?
Cord in and out, pram reset, no power light, no response to keyboard, no connected accessories, nothing on screen, no response to attempted insertion of disks, so sound (start up or otherwise), no sound of disk trying to boot etc, etc. Tried alternative cord as well...rarely shut down except for moving unit, days away etc
Please could you helpful guys and girls throw some ideas about what my issue with this rather old (first intel imac early 2006, 2o" screen) but beloved piece of tech might be?
My Imac simply went to sleep one fine spring morning and never woke up. Thanks in advance!!

I am on the phone right now with a product specialist about my iMac G5 power supply issues. Kind of ***** because he has, in so many words, said that the Genius is the Alpha and Omega and can extend the 3 year coverage. For me that is great except that the Apple store is over an hour away. I don't understand why the dude on the phone can't pull the switch and make it happen as well.
Factor in:
Unplugging iMac G5 and all peripherals
Loading it in the car
Driving an hour
Carrying it into the Mall (apple store)
Waiting for my Genius appointment
More than likely getting it fixed for free (from the sounds of things)
Driving back after it is fixed
Doing everything listed in reverse.
Would it just be easier to pay the $108 for a new power supply, wait a few days, undo some screws, and BAM! it works again?
Update. Off the phone now. The product specialist flexed his muscles, back handed the Genius to gain authority, and basically stated that they WILL DEFINITELY repair either the power supply or the logic board or both if needed. I have already had them replace the logic board once. BUT, I still have to load it up and take it to the Apple Store. Boo.

Macbook Pro 2010 is running slow. Need some help from you guys!

Can you guys help me out with some advice on how I can help it to run faster? I believe I have pasted al of the needed information below (if not, please let me know.)
If someone could please take a look at this and let me know what I should do to help speed up/clean up my mac so that it runs faster. I'm rather new to this so the more straightforward the instructions, the better! Thanks guys!
Start time: 21:16:46 07/13/14
Model Identifier: MacBookPro7,1
System Version: OS X 10.9.4 (13E28)
Kernel Version: Darwin 13.3.0
Boot Mode: Normal
Time since boot: 20 minutes
Diagnostic reports
2014-06-17 VMware Fusion Helper crash
2014-06-17 VMware Fusion Helper crash
2014-06-21 VMware Fusion Helper crash
2014-06-24 VMware Fusion Helper crash
2014-06-25 VMware Fusion Helper crash
2014-06-27 VMware Fusion Helper crash
2014-06-29 VMware Fusion Helper crash
2014-06-30 Adobe Flash Player Install Manager crash
2014-07-08 VMware Fusion Helper crash
2014-07-08 VMware Fusion Helper crash
2014-07-13 VMware Fusion Helper crash
Log
Jul 9 17:47:57 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 9 19:43:43 image 1362681856 (63%), uncompressed 2215559168 (540908), compressed 1354392912 (61%), sum1 deadda7e, sum2 24db8530
Jul 10 22:43:44 PM notification timeout (pid 3620, hpdot4d)
Jul 11 16:38:49 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:39:25 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:40:00 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 11 16:43:22 process WindowServer[3063] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Jul 11 19:28:16 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 12 11:49:26 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 12 11:51:43 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 18:31:40 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 20:49:36 MacAuthEvent en1 Auth result for: 78 Auth timed out
Jul 13 20:52:10 wl0: Roamed or switched channel, reason #8, bssid 78
Jul 13 21:01:01 process WindowServer[166] caught causing excessive wakeups. Observed wakeups rate (per sec): 380; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45074
kexts
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN (1.0.0d1)
Daemons
com.vmware.launchd.vmware
com.sierrawireless.SierraSWoCMon
com.microsoft.office.licensing.helper
com.macpaw.CleanMyMac2.Agent
com.adobe.fpsaud
launchd
/System/Library/LaunchAgents/com.apple.noticeboard.agent.plist
- com.apple.noticeboard.agent
/System/Library/LaunchDaemons/com.apple.gkbisd.plist
- com.apple.gkbisd
/System/Library/LaunchDaemons/com.apple.noticeboard.state.plist
- com.apple.noticeboard.state
/Library/LaunchDaemons/com.adobe.fpsaud.plist
- com.adobe.fpsaud
/Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
- com.macpaw.CleanMyMac2.Agent
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
- com.microsoft.office.licensing.helper
/Library/LaunchDaemons/com.sierrawireless.SWoCMon.plist
- com.sierrawireless.SierraSWoCMon
/Library/LaunchDaemons/com.vmware.launchd.vmware.plist
- com.vmware.launchd.vmware
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/Resources/version.plist
/Library/StartupItems/HP IO/StartupParameters.plist
Bundles
/System/Library/Extensions/AppleFSCompressionTypeLZVN.kext
- com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN
/System/Library/Extensions/BeceemAppleWiMAXAdapter.kext
- com.beceem.BeceemAppleWiMAXAdapter
/System/Library/Extensions/Franklin Wireless Modem.kext
- com.fklt.driver
/System/Library/Extensions/NovatelWireless3G.kext
- com.novatelwireless.driver.3G
/System/Library/Extensions/NovatelWirelessFilter.kext
- com.novatelwireless.driver.DisableAutoInstall
/System/Library/Extensions/SierraDevSupport.kext
- com.sierrawireless.driver.SierraDevSupport
/System/Library/Extensions/SierraFSCSupport.kext
- com.sierrawireless.driver.SierraFSCSupport
/System/Library/Extensions/SierraFSRSupport.kext
- com.sierrawireless.driver.SierraFSRSupport
/System/Library/Extensions/SierraHSRSupport.kext
- com.sierrawireless.driver.SierraHSRSupport
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
- net.telestream.wmv.plugin
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
- net.telestream.wmv.webplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Flip4Mac WMV.prefPane
- net.telestream.wmv.prefpane
Global login items
/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app/
Font issues: 41
DNS: 208.67.222.222 (static)
Restricted files: 3585
Widgets
iCal
Elapsed time (s): 329

I'll try that for sure. Anything else look like it could cause an issue?

Basic Output program need some help...Please

import java.io.*;
class FileOutputDemo
public static void main(String args[])
int one=1, two=2, three=3;
     FileOutputStream out; // declare a file output object
     PrintStream p; // declare a print stream object
     try
          // Create a new file output stream
          // connected to "myfile.html"
          out = new FileOutputStream("myfile.html");
          // Connect print stream to the output stream
          p = new PrintStream( out );
          p.printf ("This is written to a file %d", one);
          p.close();
     catch (Exception e)
          System.err.println ("Error writing to file");
}Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
I have a list of integer values like 1, 2, 3, 4? 10
And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
This is written to a file 1
This is written to a file 2
This is written to a file3 ?etc
Also this substitution has to be outputted to a new file every time.
Thank you very much in advance for your kind help
if i have to post this anywhere else please advise me..
Adam

import java.io.*;
public class FileOutputDemo
    public static void main(String[] args) {
         FileOutputStream out; // declare a file output object
         PrintStream p; // declare a print stream object
         try
              // Create a new file output stream
              // connected to "myfile.html"
              out = new FileOutputStream("myfile.html");
              p = new PrintStream( out );
              int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
            for (int element : arrayOfInts)
                 p.printf (element + " ");
              p.close();
              // Connect print stream to the output stream
         catch (Exception e)
              System.err.println ("Error writing to file");
}ok .... guys i really understand what do you mean,
i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
Thanks

Need some Help in Design please...

Hi All,
I am creating dimensions for my sales cube in which I am going to store Day level data with Customer and Material Data. I have to store all the Customer and Material Groups (1-5) in the cube as most of the reports are based on them. I have planned to created 2 seperate dimensions for Customer and Material and include all the Group fields as well in the respective dimensions. But, as Customer and Material master data itself are gonna be big, I am bit confused if it creates a performance issue if I include the groups in the same dimension. I remember that there is a rule like Dimension table should be < x% of cube (I didnot remember the exact figure)...Any suggestions on this design please...
I am in the process of creating process chain for my FI-GL and FI-AR flows. I am loading both line item and transaction level data for both of them. I am confused if I can include both the flows in the same chain or seperate ones? What is the sequence in loading the data i.e First Transaction or line item? First GL or AR? Any such dependencies?..Any help please...
Best Regards,
James.

Hi,
Generally, if we need to take Characterstics like Document no as part of the cube then we define them as line item dimensions, becuase we can easily predict that the no of entries in those dimensions are almost equal to fact table entries. So ask your business process team to tell about no of new entries created for Material and customers.On that basis you can decide whether it should be a Line item Dimension or not. It is juat a hypothetical assumption.
For further info on how to decide which dimension is line item dimension, search the forum.
And comming to chain:
You can go with that design.
With rgds,
Anil Kumar Sharma .P

Hey I need some HELP!! Please, it's important...

Hi everybody! First post in here...well today I accidentally installed iTunes 7.6 pressing "software upgrade". Since I'm using OSX 10.4.8 iTunes 7.6 doesn't open: it pops out kind of "need the OSX upgrade for 10.4.9 or 10.4.10 up!!"...I can't upgrade to 10.4.10 or 10.4.11 because of Pro Tools (7.1 version can give some trouble with these OSX versions).
WHAT SHOULD I DO??
Should I uninstall iTunes 7.6? Just by trashing it and then using an old version (which one would you suggest)?? I found (http://mac.oldapps.com/itunes.php) old iTunes version...but I actually can't remember which one I was using (it worked great with my 10.4.8).
Gotta say I'm a little bit scared...thanks in advance!
Hed

Searching in the forum, I found this...
"To downgrade - D/L what version you want at - http://www.oldapps.com/downloadiTunesmac.php
Go to HD>Library>Receipts - remove the iTunesX.pkg to the trash.
Drag your iTunes app to the trash. B/U your iTunes Library and .xml files. B/U your iTS purchases.
Repair permissions with Disk Utility - install iTunes - repair permissions again.
Open iTunes - if all is well you can empty the trash.
MJ"
But which version should I use with OSX 10.4.8??
Any help?
...Hed

TS3694 enyone???.....i need some help,...please...i have the 1611 code error,the phone does nothyng,he does.t restart,in the phone main screen,he show me to conect with itunes and that.s it,i think it.s block....what can i do???????

Hy everyone!!!...please, help me,i realy dont no what else can i do,the phone its block i think,cus give me the1611 code error at the time i want to reiniciatet or restarded(with itunes or without);thanks!

hey...!!!!!! i am also facing the same problem but my error code was 1602 and now after that problem my iphone got connected to ituns but it is showng restore option afte doing once....its again showing that option ..........help me if you know something

Some help for you with an Creative

Hi my name is macbrutal, today i got a black screen on my ZEN when it was on, but the battery lamp was shining blue as normal, and ofcourse the lock button was off..
You couldnt turn it off, or press any buttons.. it just were on..
If you having the same problem as i had, please try these :
First off all : ABSOLUTELY DON'T OPEN THE PLAYER!
(I mean with a screwdriver or something)
Really important so you don't broke it because of that..
-Put the ZEN back into the USB and hope for it to get back "ali've"
-Find the Reset button on your ZEN, took me 3 hours to find something to fit..
(A juice plastic thingy which i cut in pieces)
Please feel free to comment more advices so people can find their way to solve their problems with the Creative Zen player.
Thanks / McB

EdinSF,
Print, Fax, and Scan drivers are already included with Snow Leopard for Scanning. HP Scan Pro does not work however. To scan on the Officejet 6300 series at the moment you need to use your Printer browser, the Print & Fax system preference, Preview, or Image Capture. Plenty of other thread here on the issue, including my FAQ thread.
Just trying to help.
Andrew

Some help and advice please

I'm a co-op student interning at a company, and recently one of my supervisors came to me with a little project. I am given a java application and he would like to find some way of turning it into a web application (so that our clients can use this app online on our website). To give a brief description of the java app, it takes in a text file from the user, goes through it line by line looking for any duplicate or invalid entries, and then produce 2 output text files. One with the entries from the original file, only resorted and placed in a particular order (minus the duplicate or invalid entries), and the other is a log file, which is written with any duplicate or invalid entries found. These two output files are saved onto the computer (in the same place as the input file).
I have the entire source code for this app, done with a GUI interface. I am just not sure what or how to convert this into a web app. It seems like my supervisor just wants to find a way to make this same app work online, so that, as I mentioned, our clients can use when they visit our website. From reading around online, I found 2 choices that seem to work, either JSP or Java Web Start. Which would be a better choice? Or is there another choice? I have IBM Websphere Application Developer to work on this, and I would appreciate any help that anyone can give me. Thanks in advance.

Java Web start is a method of distributing an application via the Web. It doesn't magically transform your application into a web-based app; the user still needs to download the entire application; and it is run locally on their machine.
JSP will run most of the processing load on your server, which might be a better idea.
J

Some Help with Code please?

Hi, Basicly i hope someone can help me with a small issue. Im
new to flash.
I found code which uses a switchboard to switch between a
broadcast to the swf player or client side.
I want to to have a single connection button(at broadcaster
side) that will cut the switcher and enable the broadcaster to
connect directly to the client.
Im not sure what exactly to change or add inthe current mains
code.
Please help. Thanks.
(the switcher has only one button[cut_btn] that switches a
stream in embedded video [prev_video] which is activated when a
broadcaster USERID is selected from a datagrid[broadcasterList_dg])
I want a single connect button in the broadcaster which will
do what the switch button does but cut out the clicking of a
datagrid and previewing basicly cut off the switcher
altogether.

Doesnt matter ive figured it out.

Iplog some help if you please ...

Similar Messages

Maybe you are looking for