IPM Cluster Secondary server imaging deployment down after 11.1.1.8.0 Upgrade
Hi All,
We have upgraded our ECm from 11.1.1.6.0 to 11.1.1.8.0
We are using Cluster environment for IPM server and now IPM_sever2 is up but imaging for IPM_server2 is down.
error says
Invoking Start Up operation for application imaging on target IPM_server2.
[Deployer:149193]Operation 'start' on application 'imaging' has failed on 'IPM_server2'
[Deployer:149034]An exception occurred for task [Deployer:149026]start application imaging on IPM_server2.: Exception preparing module: EJBModule(imaging-agents.jar)
Unable to deploy EJB: InputAgent from imaging-agents.jar:
[EJB:011055]Error deploying the EJB 'InputAgent(Application: imaging, EJBComponent: imaging-agents.jar)', the JNDI name 'ejb/InputAgent#oracle.imaging.input.inputagent.InputAgent' is already in use. You must set a different JNDI name in the weblogic-ejb-jar.xml deployment descriptor or corresponding annotation for this EJB before it can be deployed.
Operation Start Up on target imaging Failed. Please see error logs for details.
What will be the solution??
Thanks,
Nir
Followed below documents,
1. e16793_Patching_Guide
2. b32474_Planning_Guide
3. e26692_Enabling_Administering WCC
4. e17836_Inteop_Compatibility Guide
5. e14495_Installation Guide
Which patches to apply ??
Still we are in 11.1.1.6.0 ..in IPM Other modules are updated..
Thanks.
Similar Messages
-
Simplified version: Execute command in WinPE after server image deployment but before WinPE reboots.
I have a custom ISO with a boot.wim and install.wim for deploying Windows Server to our environment. Our environment does not allow DHCP and we have no static IPs available at build time so this will all be done with no internet connection during all phases
of deployment.
We have a custom HTA form that generates an XML file based on user input and stores it on the RAMDisk during WinPE. How can we move this XML file from the RAMDisk to the deployed Windows Server image?
Thanks in advance, TimI believe you should be able to do this during the offlineServicing configuration pass. You would just need to add into your answer file a command or script to copy from the XML file over to the newly created C:\ drive.
I don't have System Image Manager installed on the computer I'm using but if I recall there is a spot during the offlineServicing pass to execute custom commands. You would just add your script path there, the WinPE system drive letter is
X:\ , and I think the target drive letter Windows is installed to might change depending on how many devices you have hooked up so do a test install and hit SHIFT-F10 , from there you can run diskpart > list volume to see where the new Windows
install is located.
Another alternative could be using a USB drive as your install media, then you can run a script during offlineServicing to copy that XML over to the USB drive. -
Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64
Hi,
ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart. When viewing the event log this is all I see..
The DNS Server service terminated unexpectedly. It has done this 497 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
if I look in the Application Error Log, I will also find the following:
Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Exception code: 0xc0000005
Fault offset: 0x000000000010b0e0
Faulting process id: 0x1740
Faulting application start time: 0x01cf531b2e3a7f5e
Faulting application path: C:\Windows\system32\dns.exe
Faulting module path: C:\Windows\system32\dns.exe
Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
Faulting package full name:
Faulting package-relative application ID:
I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
thanks,Hi,
I'm going crazy, I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade. I have finally narrowed it down to it only crashes after several minutes if I load the data from
a file instead of the registry. As a test I:
-1- killed all my dns data,
-2- uninstalled the dns server role
-3- deleted the /windows/system32/dns directory
-4- reinstalled the DNS server role
-5- used the wizard to create a DNS server and a forward zone.
everything works okay, no crashes, then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
Please help, this is killing me..
thanks in advance.. -
MDT image deployment fails after adding applications
I've been trying to use MDT (ie deployment workbench 6.2.5019.0) to build and deploy images for quite some time now, and I am having a lot of difficulty deploying images to target computers. I've successfully built a reference image in a VM with all
the Win7 updates. I can deploy that image to HP z820 workstations while injecting drivers. Then I've tried two ways of adding applications, capturing that image and then re-deploying it to other target machines.
First, I run a standard client task sequence that will deploy and capture an image to a target machine. I put in a suspend command in the task sequence. I can then add applications and then restart the task sequence. If I don't add applications,
and I just let the task sequence do it's magic, inject drivers, add any remaining Windows updates, and then just resume, MDT will capture the image. I can then add it to my deployment share and then deploy it back to my target machine that it came from
or any other similar target. On the other hand, if I add all my applications during the suspend, MDT will capture the image, but subsequent deployments of the image will always fail on the target machine during Windows setup.
Second, I can deploy the reference image to a target, let the sequence finish, add the apps, then run a sysprep and capture task sequence. I finally got that to work. I have an image with apps that I can deploy. However, I go to a target
machine that image was deployed to, I added for example Office and Winzip. Then I run the same sysprep and capture sequence, capture the image, and when I deploy that image back, it hangs while setup is installing devices.
Why am I having so much trouble just adding applications to an image that deployed perfectly fine before, but once I add apps, I can no longer use the same task sequences to capture and deploy? These same task sequences will capture and deploy the
image without the apps, but not with the apps. I don't get it.
So, what's so special about adding applications, and also can anyone give me a good reference for troubleshooting deployment issues where sysprep and setup fail for whatever reason?Hmmm... Applications should not cause hangs when installing drivers. In fact NOTHING should cause a hang like that... except for a bad driver. Go back and go through you driver manifest with a fine tooth comb and find the bad driver. That may include removing
all of your 3rd party drivers.
Keith Garner - keithga.wordpress.com -
X server won't start after recent catalyst-test and kernel upgrade
Hi,
after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
[ 114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 116.077] (WW) Falling back to old probe method for fglrx
[ 116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 116.101] (EE) fglrx(0): DAL initialization failed!
[ 116.101] (EE) fglrx(0): Display Infrastructure Failed
[ 116.101] (EE) fglrx(0): PreInit failed
[ 116.212] (EE) Screen(s) found, but none have a usable configuration.
[ 116.212]
Fatal server error:
[ 116.212] no screens found
[ 116.212] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 116.212] (EE)
[ 116.515] Server terminated with error (1). Closing log file.
My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
I've tried:
- to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
- to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
- to use open-source drivers (poor performance, overheating)
- to check nomodeset option (present at all kernel images in generated grub.cfg)
Unfortunately, I could not find any similar issue solved in past few days...Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
Edit: catalyst-test 13.2 beta works with linux 3.7.4.
Last edited by sirkubador (2013-02-05 14:24:44) -
Image path broken after 4.1 to 4.2 upgrade
Hi,
Just upgraded several instances from 4.1 to 4.2.1. Running apex listener 2.0.0.354.17.05 on glassfish 3.1.2.2. Our db is 11.2.0.3.0 on centos 2.6.32-279.9.1.el6.x86_64
One of our upgrades has a very unusual problem. Our applications all run fine, but the builder screens are blank, or at least appear blank. The page source looks normal in a browser except we find that the image paths are all malformed. They are all missing the trailing '/' after the 'i' of the images directory. For example, the builder login page has the following image reference:
https://ourorg.org/iapex_ui/apexlogo.png
which should be
https://dev.insitehome.org/i/apex_ui/apexlogo.png
If I type in the correct url, the image is viewable, so I doubt there is any issue with the server location or version of the images. Apex SEEMS to be generating the wrong path for the images.
Any suggestions?
Thanks,
Stevestevepence wrote:
Ok, it seems pretty obvious what happend. Instead of
@apxrtins.sql SYSAUX SYSAUX TEMP /i/I dropped that trailing slash after the "i".
Hopefully someone can tell me where in the apex meta data to correct that without reinstalling. Run the script <tt>/apex/utilities/reset_image_prefix.sql</tt>, but make sure they've fixed Re: 4.2 reset image prefix sql error. If not, apply the workaround before you start. -
Imac randomly shutting down after OS x 10.8.2 upgrade
After the upgrade last night, I have had 8 occasions where my imac suddenly loses power. It doesn't go through shutdown, it just is off!
Anyone else? I tend to have Mail open and Chrome at the times when this happens.
Comments?4gb of ram. but actually I think my issue is resolved. I booted from my cloned backup on Sunday, ran disk utility to verify and repair permissions on my harddrive. I've been up and running ever since. The permissions repair fixed something having to do with "coregraphics". didnt save the report. I'm still afraid to let my display sleep, harddrive, etc though. I'm afraid I wont get it to come back on if it does. A little more checking though and I think I'll be good to go. Ran WoW for 2 hours without a problem. itunes working fine. Still curious as to whether this really was a permissions issue. oh the enigma! :)
-
OBI Server is shutting down automatically!
Hi Forum,
The OBI Server is shutting down after sometime of starting the server. What could be the reason?
Regards
Vj2009-10-29 14:18:25
Data Source Name: SH
Client Driver Version 10.02.0001
2009-10-29 14:18:25
[58002] Query Cache loaded with 0 entries from saved cache files.
2009-10-29 14:18:25
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
2009-10-29 14:47:22
[36007] Loading repository C:\OracleBI\server\Repository\sh.rpd.
2009-10-29 14:47:22
[14055] Loading subject area: SH ...
2009-10-29 14:47:22
[14056] Finished loading subject area: SH.
2009-10-29 14:47:22
[16020] Metadata Database Type: Oracle8.1
Data Source Name: SH
Data Source Type: Oracle 10.02.0010
2009-10-29 14:47:22
Data Source Name: SH
Client Driver Version 10.02.0001
2009-10-29 14:47:22
[58002] Query Cache loaded with 0 entries from saved cache files.
2009-10-29 14:47:22
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900. -
Images in dashboard after deploying obiee 10g in weblogic server
Hi,
We have deployed OBIEE 10g in weblogic server at the location E:\BIDEP
Initially for OC4j server we placed the images in two places:
+1. E:\OracleBI\web\app\res\s_oracle10\images+
+2. E:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\images+
and called the image in dashoard by Link or Image fmap:images/india.jpg We were able to disply images indashoard.
After deploying, we also placed the images in
+3. E:\BIDEP\res\s_oracle10\images+ (E:\BIDEP\ is the folder where we deployed obiee.)
Now we are unble to view the images in dashoard.
Please let us kow how to do this.
Thanks.Hi MK,
Thanks. It worked.
One clarification. for OC4j Server I placed images in below:
1. E:\OracleBI\web\app\res\s_oracle10\images
2. E:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\images
For WLServer is it enough to place the images in below places:
1.E:\BIDEP\res\s_oracle10\images
2.E:\Oracle\Middleware\user_projects\domains\base_domain\servers\BI2\stage\BIDEP\BIDEP\res
or I also need to place the images in below place also.
1. E:\OracleBI\web\app\res\s_oracle10\images
In simple, at two places
1.E:\BIDEP\res\s_oracle10\images
2.E:\Oracle\Middleware\user_projects\domains\base_domain\servers\BI2\stage\BIDEP\BIDEP\res
or at 3 places
1.E:\BIDEP\res\s_oracle10\images
2.E:\Oracle\Middleware\user_projects\domains\base_domain\servers\BI2\stage\BIDEP\BIDEP\res
3.E:\OracleBI\web\app\res\s_oracle10\images
Thanks. -
Server 2012 File Server Cluster Shadow Copies Disappear Some Time After Failover
Hello,
I've seen similar questions posted on here before however I have yet to find a solution that worked for us so I'm adding my process in hopes someone can point out where I went wrong.
The problem: After failover, shadow copies are only available for a short time on the secondary server. Before the task to create new shadow copies happens the shadow copies are deleted. Failing back shows them missing on the primary server as
well when this happens.
We have a 2 node (hereafter server1 and server2) cluster with a quorum disk. There are 8 disk resources which are mapped to the cluster via iScsi. 4 of these disks are setup as storage and the other 4 are currently set up as shadow copy volumes
for their respective storage volume.
Previously we weren't using separate shadow copy volumes and seeing the same issue described in the topic title. I followed two other topics on here that seemed close and then setup the separate shadow copy volumes however it has yet to alleviate the
issue. These are the two other topics :
Topic 1: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ba0d2568-53ac-4523-a49e-4e453d14627f/failover-cluster-server-file-server-role-is-clustered-shadow-copies-do-not-seem-to-travel-to?forum=winserverClustering
Topic 2: https://social.technet.microsoft.com/Forums/windowsserver/en-US/c884c31b-a50e-4c9d-96f3-119e347a61e8/shadow-copies-missing-after-failover-on-2008-r2-cluster
After reading both of those topics I did the following:
1) Add the 4 new volumes to the cluster for shadow copies
2) Made each storage volume dependent on it's shadow copy volume in FCM
3) Went to the currently active node directly and opened up "My Computer", I then went to the properties of each storage volume and set up shadow copies to go to the respective shadow copy volume drive letter with correct size for spacing, etc.
4) I then went back to FCM and right clicked on the corresponding storage volume and choose "Configure Shadow Copy" and set the schedule for 12:00 noon and 5:00 PM.
5) I noticed that on the nodes the task was created and that the task would failover between the nodes and appeared correct.
6) Everything appears to failover correctly, all volumes come up, drive letters are same, shadow copy storage settings are the same, and 4 scheduled tasks for shadow copy appear on the current node after failover.
Thinking everything was setup according to best practice I did some testing by changing file contents throughout the day making sure that previous versions were created as scheduled on server1. I then rebooted Server1 to simulate failure. Server2
picked up the role within about 10 seconds and files were avaiable. I checked and I could still see previous versions for the files after failover that were created on server1. Unfortunately that didn't last as the next day before noon I was going
to make more changes to files to ensure that not only could we see the shadow copies that were created when Server1 owned the file server role but also that the copies created on Server2 would be seen on failback. I was disappointed to discover that
the shadow copies were all gone and failing back didn't produce them either.
Does anyone have any insight into this issue? I must be missing a switch somewhere or perhaps this isn't even possible with our cluster type based on this: http://technet.microsoft.com/en-us/library/cc779378%28v=ws.10%29.aspx
Now here's an interesting part, shadow copies on 1 of our 4 volumes have been retained from both nodes through the testing, but I can't figure out what makes it different though I do suspect that perhaps the "Disk#s" in computer management / disk
management perhaps need to be the same between servers? For example, on server 1 the disk #s for cluster volume 1 might be "Disk4" but on server 2 the same volume might be called "Disk7", however I think that operations like this
and shadow copy are based on the disk GUID and perhaps this shouldn't matter.
Edit, checked on the disk numbers, I see no correlation between what I'm seeing in shadow copy and what is happening to the numbers. All other items, quotas, etc fail and work correctly despite these diffs:
Disk Numbers on Server 1:
Format: "shadow/storerelation volume = Disk Number"
aHome storage1 = 16
aShared storage2 = 09
sHome storage3 = 01
sShared storage4 = 04
aHome shadow1 = 10
aShared shadow2 = 11
sHome shadow3 = 02
sShared shadow4 = 05
Disk numbers on Server 2:
aHome storage1 = 16 (SAME)
aShared storage2 = 04 (DIFF)
sHome storage3 = 05 (DIFF)
sShared storage4 = 08 (DIFF)
aHome shadow1 = 10 (SAME)
aShared shadow2 = 11 (SAME)
sHome shadow3 = 06 (DIFF)
sShared shadow4 = 09 (DIFF)
Thanks in advance for your assistance/guidance on this matter!Hello Alex,
Thank you for your reply. I will go through your questions in order as best I can, though I'm not the backup expert here.
1) "Did you see any event ID when the VSS fail?
please offer us more information about your environment, such as what type backup you are using the soft ware based or hard ware VSS device."
I saw a number of events on inspection. Interestingly enough, the event ID 60 issues did not occur on the drive where shadow copies did remain after the two reboots. I'm putting my event notes in a code block to try to preserve formatting/readability.
I've written down events from both server 1 and 2 in this code block, documenting the first reboot causing the role to move to server 2 and then the second reboot going back to server 1:
JANUARY 2
9:34:20 PM - Server 1 - Event ID: 1074 - INFO - Source: User 32 - Standard reboot request from explorer.exe (Initiated by me)
9:34:21 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy49
F:
T:
The locale specific resource for the desired message is not present"
9:34:21 PM - Server 1 - Event ID 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy1
H:
V:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 6, 13, 18, 22, 27, 32, 38, 41, 45, 51,
9:34:21 PM - Server 1 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy4
E:
S:
The locale specific resource for the desired message is not present"
***The above event repeats with only the number changing, drive letters stay same, citing VolumeShadowCopy# numbers 5, 10, 19, 21, 25, 29, 37, 40, 46, 48, 48
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Legacy Network Service service entered the stopped state."
9:34:28 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the stopped state.""
9:34:29 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Client Service service entered the stopped state."
9:34:30 PM - Server 1 - Event ID: 7036 - INFO - Source: Service Control Manager - "The NetBackup Discovery Framework service entered the stopped state."
10:44:07 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Volume Shadow Copy service entered the running state."
10:44:08 PM - Server 2 - Event ID: 7036 - INFO - Source: Service Control Manager - "The Microsoft Software Shadow Copy Provider service entered the running state."
10:45:01 PM - Server 2 - Event ID: 48 - ERROR - Source: bxois - "Target failed to respond in time to a NOP request."
10:45:01 PM - Server 2 - Event ID: 20 - ERROR - Source: bxois - "Connection to the target was lost. The initiator will attempt to retry the connection."
10:45:01 PM - Server 2 - Event ID: 153 - WARN - Source: disk - "The IO operation at logical block address 0x146d2c580 for Disk 7 was retried."
10:45:03 PM - Server 2 - Event ID: 34 - INFO - Source: bxois - "A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data contains the target name."
JANUARY 3
At around 2:30 I reboot Server 2, seeing that shadow copy was missing after previous failure. Here are the relevant events from the flip back to server 1.
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy24
F:
T:
The locale specific resource for the desired message is not present"
2:30:34 PM - Server 2 - Event ID: 60 - ERROR - Source: volsnap - "The description for Event ID 60 from source volsnap cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\HarddiskVolumeShadowCopy23
E:
S:
The locale specific resource for the desired message is not present"
We are using Symantec NetBackup. The client agent is installed on both server1 and 2. We're backing them up based on the complete drive letter for each storage volume (this makes recovery easier). I believe this is what you would call "software
based VSS". We don't have the infrastructure/setup to do hardware based snapshots. The drives reside on a compellent san mapped to the cluster via iScsi.
2) "Confirm the following registry is exist:
- HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VSS\Settings"
The key is there, however the DWORD value is not, would that mean that the
default value is being used at this point? -
Secondary Server MP is not working after primary server database up gradation.
Hi All,
Required your Help for MP Issue.
we had migrated the SQL data base in one of our Primary server, where there is 10 secondary servers are available.
7 secondary servers are working fine and remain 3 servers MP has down after the migration.
PFB the MPcontroal log.
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 2
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:49 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=2) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 7
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=7) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterWithWINS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
MPStart(): PublishInDNS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
Successfully Registered for IP Address Change notifications.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterForIPAddressChangeNotification() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to register the SQL connection type for the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Registered connection type for SQL Server 'XXX.com' and database 'SMS_XXX'.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterSqlDatabaseConnectionType() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Checking the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Getting the CLR Enabled value from the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
*** [08001][18][Microsoft][ODBC SQL Server Driver][DBNETLIB]SSL Security error
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** [01000][772][Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (SECDoClientHandshake()).
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** Failed to connect to the SQL Server. SMS_MP_CONTROL_MANAGER
7/8/2014 1:29:06 PM 4480 (0x1180)
Failed to get connection to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to get the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CheckSqlDatabaseClrEnabled() returned 0x800720d9
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Waiting up to 300 seconds for the SMS Agent Host service to be running.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Stopped waiting for the SMS Agent Host service to be running; error = 0x0.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): WaitOnSmsAgentHostRunning() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CreateThread() succeeded with id 0xc94.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
SMS_MP_CONTROL_MANAGER successfully STARTED.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Configuration and Availability Monitor thread started.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Initialized 'SMS Server Availability' performance instance => SMS Management Point.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
Thanks in Advance.
Regards,
Raj.Yes, I know this is an old post, but I’m trying to clean them up.
Based on your log file the problem appears to be a permission issue. “Failed to connect to the configured SQL database.”
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?
Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times? I have never had any where near this amout of trouble with all my other Canon digital cameras.
<Removed by Moderator>http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium -
Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.
Photoshop CS6 shut down after using for 5mins; no image can display on canvas.
Thanks for your help. Actually the problem was solved when turning off the GPU. In the mean time, I would like to upgrade my Video Card, too. My existing vedio card detials are as below. May I seek your advice on any good method other than replace it.
-
Lightroom workflow slows down after modifying an image
Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gbFirst of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one... -
Server slows down after a while
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.UNIXProcessForker.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
at java.lang.UNIXProcessReaper.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting on
monitor [0xbc5ff000..0xbc5ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting on
monitor [0xbc7ff000..0xbc7ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting on
monitor [0xbc9ff000..0xbc9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
at java.lang.Thread.sleep(Native Method)
at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnableThere are several threads like the one below. I would think that they are the
problem. But I don't know what they are doing - doesn't look like any application
code.
Mike
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38 nid=0x5a9f
runnable [0xbe3ff000..0xbe3ff8c0] at java.net.SocketInputStream.socketRead(Native
Method) at java.net.SocketInputStream.read(SocketInputStream.java:86) at weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
) at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24) at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
============================================================
Daniel Hoppe <[email protected]> wrote:
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after
a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering
if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.UNIXProcessForker.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
at java.lang.UNIXProcessReaper.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting
on
monitor [0xbc5ff000..0xbc5ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting
on
monitor [0xbc7ff000..0xbc7ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting
on
monitor [0xbc9ff000..0xbc9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
at java.lang.Thread.sleep(Native Method)
at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable
Maybe you are looking for
-
Data Recovery software recommendations?
I want to try to recover any or all of data lost on my iMac in Fire Vault. Would you recommend Data Recovery II, Disk Warrior, Stellar Phoenix, or something else? Pros, Cons? Thanks!
-
How to create a web bulk upload in SAP BW
Hi there, does anyboady has an idea which is the best way to create a bulk upload via web interface where the user can select a csv file and upload data by himself? Thanks in advance. regards, ralph
-
How to download the exe file, rather then installing
hi, as my working pc has very low internet connectivity, how can i download and take this installable file to my pc? because when ever i click on download flash builder 4.7 trail it starts installing rather then downloading and getting saved in s
-
Sections of web pages are in Portugese despite settings being English.
(http://i.imgur.com/rIoiM.png) here is a link I hope will show what I mean. Google maps for example is in Portuguese but only if I use Firefox, Internet Explorer works fine.
-
ya know the scene at the end of pulp fiction when harvey keitel races to the house in his car, and it says 9 min 37...38...39 seconds later? i dont want the exact design of that title card, but just a plain title card saying something like 9 minutes