IPMA not working in ciscoi 7970 phones

There is abnormality observed in cisco 7970 phones With IPMA service .On selecting services  --->IPMA it is showing :select service... and user is unable to select any service.PA in unable to login.this is working fine withg other cisco color phones models.

Can you share a screenshot of the error?
You can try the following things getting into packet captures and traces.
1) Remove the IPMA config from one 7970 and reconfigure it. It includes unsubscribing the ipma service and resubscribing it.
2) Restart of IPMA and CTI services
Please provide details like cucm and phone firmware versions so that any known issues / defects can be checked.
HTH
Manish

Similar Messages

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings

    I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much

    Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.

  • Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

    Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
    my iphone is now just coverd with case and the back house is crased

    Etisalat, Mobinil and Vodafone provide warranty service in your country.  You can also search Google for a 3rd party repair shop near you.

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • Wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    Now my wifi is working but not showing the wifi logo on the top

  • MacBook Air wifi internet shared network not working on tethered android phone GT B5122

    MacBook Air wifi internet shared network not working on tethered android phone GT B5122
    I have created a password protected wifi internet network on my Macbook air. I tethered by Andriod phone onto this network, but the internet connection works intermittently on the phone, and when it stops working the network continues to show as connected to the shared network mostly(other times it keeps renewing the wifi IP address on the Andriod phone).
    Also the network the MBA is connected to, is a hardwired one using a SSH login account in a student accomadations.
    I am not sure, but all the restarting and refreshing of system, phone and wifi sharing and re-enabling wifi is not reparing the internet connecting on the wifi network for the phone
    Really puzzled, if this is one of the Apple, Andriod compatability issues.
    Cheers,
    Vivek

    Spanners91 wrote:
    Hi.
    I'm having trouble with the wireless connection on my new home hub 3. Most devices will connect easily, but there are three devices that have trouble connecting. These are an Android Phone (Samsung Galaxy Mini), an android tablet (Sony Tablet S) and an iPod. All of these devices work perfectly on other network connections, and other devices in the house are quite happy connecting to the network.
    The Androids can see the network, and will try to connect to it, but when they do they just go through a loop of "connecting">>"acquiring IP address">>"disconnected". I have tried resetting the Home Hub with a pin, and that lets the devices connect for about 24 hours, but after that time they stop connecting again.
    I'm really not sure what to do to fix the problem, so I will very much appreciate some help.
    Many Thanks.
    My lads SGMini connects perfectly to our hub3
    Have you installed the BTFon app to these devices?
    If so, you could delete it and then see what hapens.....
    -+-No longer a forum member-+-

  • Apps not working on my I phone 4 when i turn on wifi they work fine ?

    apps not working on my I phone 4 when i turn on wifi they work fine ?

    That leads me to suspect that your cellular data is either turned off or not working.
    Check Settings > General > Network > Cellular Data and ensure it is ON.
    If it is, try Settings > General > Reset > Reset Network Settings.
    If neither of those resolves the issue, contact the carrier to troubleshoot your network/account issues with them.

  • Camera is not work in my I phone 3gs

    Why Camera is not work in my I phone 3GS?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • My phone will not charge, it says This cable or accessory is not certified an may not work reliably with this phone

    My phone will not charge it says this cable or accessory is not certified an may not work reliably with this phone? What do I do?

    Is the cable the one that came with your Apple device? Is it a replacement cable that you purchased? If it is, did you purchase an Apple certified cable?
    Cheers,
    GB

  • BT Broadband not working when on the phone

    Been a BT customer for couple of months.
    Multple devices are connected to the Hub no problems but when the phone rings the broadband does not work. 
    The Hub flashes orange almost everytime when someone is on the phone. Whether it be a outgoing or incoming call.
    Only using the master socket for both the phone and the Hub. Using the inbuilt filter on the socket. 
    If anyone could help with this issue I would greatly appreciate it.  
    Did not have this issue with Orange Broadband so there must be something wrong on BT's end not ours!

    Can you specify your current setup?
    Which Hub do you use?
    Does your phone socket have the 'Openreach' symbol on it?
    Do you use filters?
    Is your hub connected to the master socket?
    Is your phone connected to an extension socket?
    ┌──────────────────────────────────────┐
        To say thanks for this post, please click the star on the left
       If not, please accept my apologies, hope I can help next time
    └──────────────────────────────────────┘

  • My Bionic does not work properly. The phone should not have been released...dead Camels

    I took my Bionic back to Verizon yesterday. I am not getting 4G data, and it will not work in the car dock. When I got to the store, I had 4G, and it worked perfectly in the dock, all he did was sit it in. This phone must only work in the store, maybe that is why they released it before it was ready.
    The Verizon technician told me that there were problems with the phone, but that the responsibility belonged to Motorola. He said there was going to be an update in November and that I should wait. This concerns me because it means Verizon will pass the buck on this one.
    What choice do I have? My return period is way over. I am paying for a service that I don't have yet I can't get out of it. If the phone can't be fixed by a software update, then what? At that point, I will either hope for a class action suite, or cancel my contract and pay $350 so that I can get a decent phone....iPhone from AT&T. That would be cheaper than buying a new phone from Verizon under my current contract. I can't keep a phone that never works. 
    I think yesterday was like the straw that broke the camel's back for me. I tried for 15 min to get the car dock to work, and nothing would turn it on. That is when I just drove to Verizon. I figured they should see one more unhappy customer in person instead of just online...alas, no one there gave a **bleep** and they are still trying to sell the Bionic to the unsuspecting customer. It should be pulled off of the shelf until it is fixed.
    Joey

    techwhiz wrote:
    Verizon and Motorola didn't have the time to test the Bionic.
    They were too busy working on the Razr and screwing us.
    PRE-ORDER YOUR DROID RAZR TOMORROW 10.27 8AM EDT
    Introducing DROID RAZR by Motorola.
    The ultimate power of DROID. The legendary edge of RAZR. Combined to form the world's thinnest 4G LTE smartphone. 
    •  Android 2.3 Gingerbread OS 
    •  Dual-core 1.2 GHz processor 
    •  KEVLAR® strong back plate,    Gorilla® Glass face 
    •  7.1 mm thin with big 4.3 inch    Super AMOLED Advanced display
    My Bionic did it again. It is not recognizing the car dock, and it is not getting data connection. I sat in a La Madelains for 15 min hoping for data. Then, when I drove home, I tried the car dock...nothing. This is basically a little 3G tablet with WiFi and a phone. I can do most of that better with my iPad.
    Joey

  • Not working wifi & Bluetooth.I phone by UAE iam now in India how get warranty

    Not working wifi & Bluetooth.I phone by UAE iam now in India how get warranty

    Either take the iPhone to UAE yourself or send to friend/relative
    there to take in for service. Be advised that many iPhones sold
    in UAE are gray market - originally sold elsewhere. iPhone warranty
    is valid only in country of original purchase and that may be somewhere
    other than UAE.

  • My speakers are not working sometimes after my phone got wet in rain...

    hi there please help me out i have been using iphone and my 4s got wet in rain and after that issue i got a problem that my speaker are not working for music and videos but my ringtone rings and i could hear my calls in loudspeaker and then after sometime it rectifies itself and becomes normal...... then again if i switch off and switch on i get the same problem ...... what should i do ??? is it a common problem ???? i have tried dock cleaning with qtip and kept in the rice bag........ does anyone know a solution for it???

    No other way. They will probably want to swap the phone out for you for a fee of some sort of course.  I wouldn't suggest self repair because at this point you really don't know what the issue is.  Maybe its something to do with the speaker, or maybe the logic board is damaged.
    If you think the phone might still be a little damp or wet inside, try putting it in a bowl of rice for a day.  The rice may be able to suck out the moisture which could possibly be causing an intermittent issue. 

Maybe you are looking for

  • Error in posting gr

    hi i m doing gr in migo...while posting i get this error msg. how do i go ariund with this ...find the error below.. ''No authorization for posting period 010 2009 Message no. F5A094 Diagnosis Period 010 in fiscal year 2009 is open for posting for th

  • How to create a shared review without an internal server

    I have Adobe Acrobat XI Pro, and I'm trying to create a shared review where myself and 2 colleagues can make edits and add comments to the same PDF simultaneously. Basically, we're all tasked with editing the document and have to work on it at the sa

  • Problem in BDC for cj02

    Dear Experts, I hv done recording in shdb fo  tcode cj02. i hv written driver program for the same. when i run the program, no data is getting updated, though it goes through all the fields captured in recording. it gives the following msgs. CALL_TRA

  • Creating Chapter Length

    I'm trying  to work with a video that is going to be used for ceremonial purposes.  On parts of it I need the video to hold on a certain image for minutes at a time.  Is there any way I can create a chapter where it's just the frozen image and it wil

  • Toshiba 40L3443DG - can't go to VIEWSTER application anymore

    Hi I recently bought Toshiba smart TV 40L3443DG, it was working fine the first couple of days but now i can't go to VIEWSTER application anymore, i click on it, it goes on loading black page then it goes again on program page [Home page]. and i wante