Ipnone USB connection issues on mac

After I erased my harddisk and reinstalled Mavericks my internet connection fall out a 1000 times a day when using my iphone a my internet.
I have added a few screenshots to show that;
1. My iphone is connected
2. that my brower does have connection on and off which show on the tabs on the top.
I also updated my Ihone to the newst iOS version 7.0.5, and are running on OS X version 10.9.1
Anyone help me sort this out

Hi Abdel Mac,
Thanks for visiting Apple Support Communities.
It sounds like you are connecting your MacBook Air to your iPhone using Personal Hotspot, but the connection is unexpectedly being lost.
This behavior could be caused by either your Mac or your iPhone, and I recommend testing both. If possible, you may also want to connect to another Wi-Fi network with your MacBook Air to see if you can reproduce the behavior.
I recommend starting with the troubleshooting steps in these articles:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
Jeremy

Similar Messages

USB Connection Issues-New Mac Pro

I have a new Mac Pro (late 2013) that has USB connection issues.
First; it often fails to recognize a USB keyboard, or takes more than a minute to do so. I tried it with two different keyboards, one a regular Apple USB keyboard and the other a Das Keyboard unit. I tried it both on a powered USB hub and directly connected to the computer. Neither of these affected the problem. It happened both under Mountain Lion and Yosemite, and seems to be worse under Yosemite. This problem DOES NOT occur on my Mac Mini, so the problem appears to be with the Mac Pro. Most of the time unplugging and plugging the keyboard in again solves the problem. This gets old. I have gone to using a bluetooth keyboard but much prefer the USB keyboards with the numeric keyboard.
It also ejects the only USB drive attached to it. It does not eject the two Thunderbolt drives. The disconnection occurs when the Mac Pro is in the "sleep" mode; the "Disk not ejected properly" message is displayed when the computer wakes up. This happens almost all the time. The same drive does not exhibit this behavior when attached to the Mac Mini. It is an older G-Drive unit.
Possibly related to this is the fact that the two Thunderbolt units (Pegasus R2 and Lacie) do not shut off when the Mac Pro is sleeping. I wonder if the problem lies in how the unit "sleeps" and "wakes up". I don't know enough about the internal workings of these things to know how to test for this.
If anyone knows how to fix this I'd appreciate some advice.

Have you tried resetting the SMC and PRAM?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Why doesn't the sd card or the usb connect to my mac ????

why doesn't the sd card or the usb connect to my mac plzzzz help meeeeeeeeeee

The reason no one has replied is that you posted in a little-viewed forum for an obsolete Apple software suite. I am asking the Hosts to move you to the MacBook Air forum.
Also these forums are NOT chat rooms so you will seldom get an instant answer. No one here works for Apple; we are end users like you who volunteer on a time-available basis to help our fellow Mac users. Patience is required here.

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

At what point is the video quality bad? Is it bad on capture? I would recommend using an s-video 1394 firewire converter instead. They capture the video at a higher bit rate. If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder. They capture and compress in one shot. If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

N97 usb connectivity issues

Hi,
I've had my N97 for about a week now and am having some serious USB connectivity issues with the phone in that when I connect to my PC, on the first occasion it will recongnise the USB connection, but if it gets disconnected it subsequently won't reconnect. This means I am unable to install the latest version of the firmware which appears to address some USB issues. I've tried both version 1 and the beta 2 Ovi suite.
Any ideas??
Thanks,
Trev

Hi!
Me and my friend at work got the same STUPID problem. We unpacked our phones, connected them and upgraded FW and got everything setup (mail, music etc.)
Now I got back to work and thought that it was no problem plugging in my phone and update it with some new music and contacts...well was I wrong...the stupid 7000 SEK phone won't even take the electricity and charge...I get no connection to the PC...it worked fine 2 days ago...
So I try to install the stuff on the CD again, no luck....I tell Windows to add new hardware, nowhere on the Internet and nowhere on the CD are there drivers to be found...
So here I am with a million dollar phone I can't connect to my PC...what the hell is this???
Looking in this thread and seeing the answers I should not hold my breath waiting for this to be fixed...but my question is: Will I have to wait for a FW update for this phone to connect to my PC?
Regards
//toppis

USB connectivity issues

I recently bought a 20GB 4G iPod from a friend, who had bought it originally off of ebay atleast a year ago so all I have is the ipod itself and a usb cable.
Everything on it works fine, all of the music previously put on works fine, as do pictures, etc. But when I went to go add and delete files off of the ipod I got the "USB Device Not Recognized" balloon popup in XP. After going through these forums and numerous others I haven't been able to accomplish anything. I've tried the 5R's (except for restore as I haven't been able to get the ipod connected in any way to this computer).
I have another computer downstairs which is a few years older, about 5 years old but which has XP installed aswell, so I figured I might try and see if I could get anything to work on that.I tried to plug the ipod into just to see if something would work, and it showed up in My Computer right away before I had iTunes installed. I did, however get an error about the usb ports not being high speed, I'm assuming they're USB1.1 giving the computer's age, but it worked nevertheless. I got the ipod to charge, it to be accessible from iTunes, and to show up in Windows Explorer without a hitch.
After having it fully charged I tried once again to hook the ipod up to any usb port with no avail. I checked both computers' properties and found both have 500 mA to each USB port, so I would assume the USB 2.0 ports would have a better chance of working than the 1.1?
Any help is greatly appreciated, let me know if you need more information, thanks!

This may sound really strange, but if your computer has a FireWire connection, try using that instead. I recently bought a new computer (HP w/Windows XP) and had all sorts of USB connection issues.
USB Device Not Recognized
iPod needs to be restored
Cannot Read USB Storage Device
Finally fed up, I tried the FireWire ports on the computer and it worked not problem. iTunes popped right up and started updating.
HP Windows XP
HP Windows XP

Help: USB Connection issues

I have been having USB connection issues for 2 month and can't seem to find a fix. My MP is a 2 x 2.8 Quad-core with 16 GB ram, OS X 10.6.5. When I connect devices (iPhone, iPad, CF card reader) everything connects but when I sync or try downloading photos from my CF reader I get partially through but then I get an error that the device has been ejected.
I have tried disconnecting my hub and connected directly to the ports but no change. Tried new cords, hubs. If I connect my Canon 7D camera directly to a USB port I can get the images off but that take for ever because of the file size. The only thing that seem to work and not loose my connection is my Epson Pro 3800 printer.
I'm getting desperate at this point, I have two important photo shoots coming up the first of the year and need to get things working properly. Any help would be much appreciated.

Here's some tips.
Apples version.
DALE

Nokia N800 - USB Connectivity Issues

I was just getting ready to purchase about 3000 770's when I found out the N800 was being released. So I bought a few test models. I am having some issues with the new model that I've not heard addressed on any forums yet:
1. USB connection to the PC is a little bit "picky". After several failed attempts to connect to my Windows XP machine ("Error connecting USB device" ), I finally figured it out: The 800 has to be powered OFF before it's plugged in. This was not the case for the 770.
2. Despite all attempts, I've failed to connect the N800 to a Mac. This is the first device I've ever had problems getting a Mac to talk to.
And finally, a complete mystery:
3. Why, on a device touting its open source qualities, is the software updater written exclusively for dot Net architecture? I wonder if anyone else has found the fact that a Linux-based device can not be updated by a Linux-based computer a bit ironic?Message Edited by sealswcc on 22-Jan-2007
08:07 PM

After upgrading from an older version of OS2008 to the latest
version, I lost the ability to connect my N800 to my Linux
box as a USB device. Before, it would show up as a USB
device, and I could access the card. Now it doesn't.
I have it plugged in when I connect the cable, and when
I start it, it boots as though the cable is not connected,
and it does not appear as a device. This is rather odd!
Has anybody else experienced this?

USB Connection Issues

Have the 8330 Curve and the Blackberry Desktop application. It has allowed me to install apps such as opera mini, a stock portfilio app, and can import my calendar items. I now see 'connecting' in the lower right corner. Do not see anything on the desktop app that I see as abberant. What would I need to check on the device to troubleshoot?

Hi PhilPense,
To troubleshoot any connectivity issues with the BlackBerry® Desktop Software, please have a look at the following KB article. Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry smartphone. www.blackberry.com/btsc/KB00125
Hope this is helpful.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Internet connectivity issues on Mac

I was wondering if there was any solution to an internet connectivity issue I'm having on a mac. It seemed to start when I purchased a new modem: an iPrimus AudioCodes MP252 wireless router. Basically the internet connection will either drop out or become stagnant/very slow. There have been no connection/speed issues on any Windows PC or laptop, but often when you try to use the internet on the mac it precipitates a network dropout, thus affecting the connection on Windows computers as well.
I'm trying to see if there's anything else that can be done besides taking it in to be serviced. ISP support hasn't been able to fix the issue, so perhaps it is some sort of compatibility issue between that particular modem and Apple Macs. Obviously the last resort is buying a new modem.
Modem: AudioCodes MP252 Series wireless router
Mac: Mac OS X Version 10.6.8

Hi, some Modems/Routers only like Windows PCs, also see if QoS is running on it giving most resources to PCs.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

E-72 OVI Suite-USB Connection Issue

Model: E-72
OS: 031.023
OVI Suite Version: 2.2.1.23
Laptop OS: Windows 7 Enterprise 64 Bit
Problem: When connecting the phone via USB, OVI Suite suggests that the phone is not in PC Suite mode where as I've selected PC Suite mode when it prompts also by going to
Ctrl Pnl>Connect>USB. But no luck, restarted Laptop multiple times, also the phone.
OVI works fine with Blutooth for all sync etc but I need USB connection working to upgrade mobile software.
Other Observations: When phone is connected via USB Windows 7 detects it as S60 device with options of manage media, browse files, import picture, not sure if this is related. Also the device shows error and requires troubleshooting in modem mode because of bluetooth peripheral device is not installed due to not being able to find appropriate driver.
This is a new phone and new OS, using for first time with USB cable, it never worked, no changes made that could be trigger for this issue, any help will be greatly appreciated

Hi gmudgal83
I am not sure whether this will solve your problrm but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

PRS950 USB Connectivity issues

Very inconsistent USB connectivity - it connected to the Library software, once, and synced properly from a USB port directly on the computer. The next time, from the same port, it can't be seen in the Library software - at all. Mostly, the reader says it's connected and charging battery - but will not show up in the Library software.
Now the computer (Windows 7, SP1) wants to reformat the drive before it can be used? I'm tempted!!!
Help - please...!
Thanks,

Are you having the same issue on all USB ports? Try uninstalling and reinstalling the USB Root Hubs in Device Manager. Have you tried connecting the Reader to another computer? It needs to be established whether the issue is related to the computer or the Reader itself. If you have reset the Reader, uninstalled and reinstalled the software but the issue still persists I would recommend that you contact Sony product support for more extensive troubleshooting of the issue:
http://esupport.sony.com/US/perl/suppor ... mdl=PRS950

Asha 501 - USB connectivity issues

In Asha 501 after selecting Mass storage option the "removable drive" icon has stopped appearing on Win 7 Ultimate.
Earlier after installing connectivity cable drivers it used to catch instantly and the USB connectivity was working flawlessly allowing me to transfer files.
Today, the "Mass Storage" option is showing up but on PC the "removable drive" icon is not appearing at all.
Any help in this regard would be highly appreciated.. ty
Solved!
Go to Solution.

It's working now
After uninstalling and making a fresh installation of the drivers from Nokia and couple of restarts, it has started to work as normal and now the "disk drive" always shows up under the list of "Devices with removable storage"
I haven't found the cause to why it wasn't working previously but to my knowledge USB port may be the issue in recognising the USB cable when connected. Few restarts is the key.

USB connectivity issues with Canon 5d

Running 10.4.8, and Capture one Pro 3.7.6. we are trying to tether our Canon 5D to our computers.
It had all been working fine, but the camera had to go back to Canon for repair to USB connection.
On Return it wouldn't connect to either of our machines.
We tried to see if it would connect through Canon's own software, and it would not.
But here's the thing: a borrowed 5d won't connect either, and yet it connects fine to its owners computer. AND Our 5d connects to their computer.
Other point: we do have the ltest firmware, and have for a while. Also, Canon EOS 1ds connects fine through firewire.
I think this points to Mac, and maybe to Canon and mac. Anyone else have a thought?
(At some point I remember having to replace a .kext file when we went from 10.4.6 to 10.4.7, and the change to 10.4.8 made no problems, but there have been no updates to our software since the repair.)
Any thoughts on this will be appreciated...particularly if they solve the problem.
Sean
Mac G5 Mac OS X (10.4.8)

On Macs, tethering got broken recently, but that isn't your problem.
I know that some Nikons have two menu-settable options for the USB connection, only one of which works for tethering. Perhaps your Canon has something similar. (Nikon's are PTP and Mass Storage.)
Hal

Ipnone USB connection issues on mac

Similar Messages

Maybe you are looking for